mbox series

[v5,0/6] drm: simplify support for transparent DRM bridges

Message ID 20231025223027.943563-1-dmitry.baryshkov@linaro.org
Headers show
Series drm: simplify support for transparent DRM bridges | expand

Message

Dmitry Baryshkov Oct. 25, 2023, 10:28 p.m. UTC 
Supporting DP/USB-C can result in a chain of several transparent
bridges (PHY, redrivers, mux, etc). All attempts to implement DP support
in a different way resulted either in series of hacks or in device tree
not reflecting the actual hardware design. This results in drivers
having similar boilerplate code for such bridges.

Next, these drivers are susceptible to -EPROBE_DEFER loops: the next
bridge can either be probed from the bridge->attach callback, when it is
too late to return -EPROBE_DEFER, or from the probe() callback, when the
next bridge might not yet be available, because it depends on the
resources provided by the probing device. Device links can not fully
solve this problem since there are mutual dependencies between adjancent
devices.

Last, but not least, this results in the the internal knowledge of DRM
subsystem slowly diffusing into other subsystems, like PHY or USB/TYPEC.

To solve all these issues, define a separate DRM helper, which creates
separate aux device just for the bridge. During probe such aux device
doesn't result in the EPROBE_DEFER loops. Instead it allows the device
drivers to probe properly, according to the actual resource
dependencies. The bridge auxdevs are then probed when the next bridge
becomes available, sparing drivers from drm_bridge_attach() returning
-EPROBE_DEFER.

Changes since v4:
 - Added documentation for new API (Sima)
 - Added generic code to handle "last mile" DP bridges implementing just
   the HPD functionality.
 - Rebased on top of linux-next to be able to drop #ifdef's around
   drm_bridge->of_node

Changes since v3:
 - Moved bridge driver to gpu/drm/bridge (Neil Armstrong)
 - Renamed it to aux-bridge (since there is already a simple_bridge driver)
 - Made CONFIG_OF mandatory for this driver (Neil Armstrong)
 - Added missing kfree and ida_free (Dan Carpenter)

Changes since v2:
 - ifdef'ed bridge->of_node access (LKP)

Changes since v1:
 - Added EXPORT_SYMBOL_GPL / MODULE_LICENSE / etc. to drm_simple_bridge

Dmitry Baryshkov (6):
  drm/bridge: add transparent bridge helper
  phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE
  usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE
  drm/bridge: implement generic DP HPD bridge
  soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE
  usb: typec: qcom-pmic-typec: switch to DRM_AUX_HPD_BRIDGE

 drivers/gpu/drm/bridge/Kconfig                |  17 ++
 drivers/gpu/drm/bridge/Makefile               |   2 +
 drivers/gpu/drm/bridge/aux-bridge.c           | 140 +++++++++++++++
 drivers/gpu/drm/bridge/aux-hpd-bridge.c       | 164 ++++++++++++++++++
 drivers/phy/qualcomm/Kconfig                  |   2 +-
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c     |  44 +----
 drivers/soc/qcom/Kconfig                      |   1 +
 drivers/soc/qcom/pmic_glink_altmode.c         |  33 +---
 drivers/usb/typec/mux/Kconfig                 |   2 +-
 drivers/usb/typec/mux/nb7vpq904m.c            |  44 +----
 drivers/usb/typec/tcpm/Kconfig                |   1 +
 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c |  41 +----
 include/drm/bridge/aux-bridge.h               |  37 ++++
 13 files changed, 383 insertions(+), 145 deletions(-)
 create mode 100644 drivers/gpu/drm/bridge/aux-bridge.c
 create mode 100644 drivers/gpu/drm/bridge/aux-hpd-bridge.c
 create mode 100644 include/drm/bridge/aux-bridge.h

Comments

Bjorn Andersson Oct. 26, 2023, 1:54 a.m. UTC | #1 
On Thu, Oct 26, 2023 at 01:28:06AM +0300, Dmitry Baryshkov wrote:
> Use the freshly defined DRM_AUX_HPD_BRIDGE instead of open-coding the
> same functionality for the DRM bridge chain termination.
> 

Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>

Regards,
Bjorn