mbox series

[V2,0/4] Add support for IPQ5018 tsens

Message ID 20230915121504.806672-1-quic_srichara@quicinc.com
Headers show
Series Add support for IPQ5018 tsens | expand

Message

Sricharan R Sept. 15, 2023, 12:15 p.m. UTC
IPQ5018 has tsens V1.0 IP with 4 sensors and 1 interrupt.
There is no RPM present in the soc to do tsens early enable.
Adding support for the same here.

[v2]
	*) Sorted the compatible and removed example
	*) Fixed the name for new tsens_feature
	*) Used tsend_calibrate_common instead of legacy
	   and addressed comments from Dmitry.
	*) Squashed patch 3 & 4
	*) Fixed node names, order and added qfprom cells
            for points seprately
	*) Squashed patch 6 & 7 

Sricharan Ramabadhran (4):
  dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
  thermal/drivers/qcom: Add new feat for soc without rpm
  thermal/drivers/tsens: Add support for IPQ5018 tsens
  arm64: dts: qcom: ipq5018: Add tsens node

 .../bindings/nvmem/qcom,qfprom.yaml           |   1 +
 .../bindings/thermal/qcom-tsens.yaml          |   1 +
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 169 ++++++++++++++++++
 drivers/thermal/qcom/tsens-v1.c               |  58 ++++++
 drivers/thermal/qcom/tsens.c                  |   5 +-
 drivers/thermal/qcom/tsens.h                  |   5 +-
 6 files changed, 237 insertions(+), 2 deletions(-)