mbox series

[v5,0/2] dts: qcom: Use labels with generic node names for ADC channels

Message ID 20230730-generic-adc-channels-v5-0-e6c69bda8034@somainline.org
Headers show
Series dts: qcom: Use labels with generic node names for ADC channels | expand

Message

Marijn Suijten July 30, 2023, 8:31 p.m. UTC
As discussed in [1] it is more convenient to use a generic `channel`
node name for ADC channels while storing a friendly - board-specific
instead of PMIC-specific - name in the label, if/when desired to
overwrite the channel description already contained (but previously
unused) in the driver [2].

The same `channel` node name pattern has also been set in
iio/adc/adc.yaml, but this generic binding is not inherited as base for
qcom,spmi-vadc bindings due to not having any other generic elements in
common, besides the node name rule and reg property.

Replace the .* name pattern with the `channel` literal, but leave the
label property optional for bindings to choose to fall back a channel
label hardcoded in the driver [2] instead.

[1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@somainline.org/T/#u
[2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@somainline.org/

Changes since v4:
- Dropped iio (dt-bindings) patches that have been merged, leaving only
  ARM/arm64 DTS patches;
- Rebased against next-20230728.

v4: https://lore.kernel.org/linux-arm-msm/20230410202917.247666-1-marijn.suijten@somainline.org/

Changes since v3:
- Switch generic node name to `channel`, matching iio/adc/adc.yaml;
- Besides switching arbitrary names to `channel`, now also rename all
  existing `adc-chan` names to `channel`, including ARM tree;
- Rebase on next-20230406 and apply rename to newer PMIC files.

v3: https://lore.kernel.org/linux-arm-msm/20230201204447.542385-1-marijn.suijten@somainline.org/T/#u

Changes since v2:
- Reorder DT changes before dt-bindings changes;
- Update adc-chan generic node name in tm5 example bindings.

v2: https://lore.kernel.org/linux-arm-msm/20230119212632.185881-1-marijn.suijten@somainline.org/T/#u

Changes since v1:
- Require adc-chan name in dt-bindings;
- Replace more node names with adc-chan and a descriptive label, that
  were found by running dtbs_check on adjusted bindings;
- sm8250-mtp.dts: Fix accidental adc-chan2 node name with pa_therm
  label, which should have been adc-chan with pa_therm2 label.

v1: https://lore.kernel.org/linux-arm-msm/20221209215308.1781047-1-marijn.suijten@somainline.org/

--
2.40.0

---
Marijn Suijten (2):
      ARM: dts: qcom: Use labels with generic node names for ADC channels
      arm64: dts: qcom: Use labels with generic node names for ADC channels

 arch/arm/boot/dts/qcom/qcom-pm8226.dtsi            | 12 +++----
 arch/arm/boot/dts/qcom/qcom-pm8941.dtsi            | 14 ++++----
 arch/arm/boot/dts/qcom/qcom-pma8084.dtsi           | 12 +++----
 arch/arm/boot/dts/qcom/qcom-pmx55.dtsi             |  8 ++---
 arch/arm64/boot/dts/qcom/pm6125.dtsi               | 18 ++++++----
 arch/arm64/boot/dts/qcom/pm6150.dtsi               |  2 +-
 arch/arm64/boot/dts/qcom/pm6150l.dtsi              |  8 ++---
 arch/arm64/boot/dts/qcom/pm660.dtsi                | 33 ++++++++++++------
 arch/arm64/boot/dts/qcom/pm7250b.dtsi              | 24 ++++++-------
 arch/arm64/boot/dts/qcom/pm8150.dtsi               |  6 ++--
 arch/arm64/boot/dts/qcom/pm8150b.dtsi              |  8 ++---
 arch/arm64/boot/dts/qcom/pm8150l.dtsi              |  6 ++--
 arch/arm64/boot/dts/qcom/pm8916.dtsi               | 14 ++++----
 arch/arm64/boot/dts/qcom/pm8950.dtsi               | 39 ++++++++++++++--------
 arch/arm64/boot/dts/qcom/pm8953.dtsi               | 12 +++----
 arch/arm64/boot/dts/qcom/pm8994.dtsi               | 12 +++----
 arch/arm64/boot/dts/qcom/pm8998.dtsi               |  2 +-
 arch/arm64/boot/dts/qcom/pmi8950.dtsi              | 12 +++----
 arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi          |  6 ++--
 arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi          |  6 ++--
 arch/arm64/boot/dts/qcom/pmp8074.dtsi              | 27 ++++++++++-----
 arch/arm64/boot/dts/qcom/pms405.dtsi               | 21 ++++++++----
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts           | 15 ++++++---
 .../boot/dts/qcom/sc7180-trogdor-coachz-r1.dts     |  4 +--
 .../arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi |  3 +-
 .../boot/dts/qcom/sc7180-trogdor-homestar.dtsi     |  3 +-
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi |  2 +-
 .../boot/dts/qcom/sc7180-trogdor-pompom-r1.dts     |  2 +-
 .../boot/dts/qcom/sc7180-trogdor-pompom-r2.dts     |  2 +-
 .../arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi |  3 +-
 .../boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi  |  3 +-
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi       |  3 +-
 arch/arm64/boot/dts/qcom/sc7280-idp.dts            |  2 +-
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi           |  2 +-
 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi         |  4 +--
 .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts     | 26 +++++++--------
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi         | 10 +++---
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts            | 12 +++----
 .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts   | 15 ++++++---
 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts  |  6 ++--
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts            | 21 ++++++++----
 41 files changed, 254 insertions(+), 186 deletions(-)
---
base-commit: d7b3af5a77e8d8da28f435f313e069aea5bcf172
change-id: 20230730-generic-adc-channels-60920071b1a1

Best regards,

Comments

Dmitry Baryshkov July 31, 2023, 3:52 a.m. UTC | #1
On 30/07/2023 23:31, Marijn Suijten wrote:
> As discussed in [1] it is more convenient to use a generic `channel`
> node name for ADC channels while storing a friendly - board-specific
> instead of PMIC-specific - name in the label, if/when desired to
> overwrite the channel description already contained (but previously
> unused) in the driver [2].  Follow up on the dt-bindings' `channel` node
> name requirement, and instead provide this (sometimes per-board) channel
> description through a label property.
> 
> Also remove all the unused label references (not to be confused with
> label properties) from pm660, pmp8074 and pms405.
> 
> [1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@somainline.org/T/#u
> [2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@somainline.org/
> 
> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
>   arch/arm64/boot/dts/qcom/pm6125.dtsi               | 18 ++++++----
>   arch/arm64/boot/dts/qcom/pm6150.dtsi               |  2 +-
>   arch/arm64/boot/dts/qcom/pm6150l.dtsi              |  8 ++---
>   arch/arm64/boot/dts/qcom/pm660.dtsi                | 33 ++++++++++++------
>   arch/arm64/boot/dts/qcom/pm7250b.dtsi              | 24 ++++++-------
>   arch/arm64/boot/dts/qcom/pm8150.dtsi               |  6 ++--
>   arch/arm64/boot/dts/qcom/pm8150b.dtsi              |  8 ++---
>   arch/arm64/boot/dts/qcom/pm8150l.dtsi              |  6 ++--
>   arch/arm64/boot/dts/qcom/pm8916.dtsi               | 14 ++++----
>   arch/arm64/boot/dts/qcom/pm8950.dtsi               | 39 ++++++++++++++--------
>   arch/arm64/boot/dts/qcom/pm8953.dtsi               | 12 +++----
>   arch/arm64/boot/dts/qcom/pm8994.dtsi               | 12 +++----
>   arch/arm64/boot/dts/qcom/pm8998.dtsi               |  2 +-
>   arch/arm64/boot/dts/qcom/pmi8950.dtsi              | 12 +++----
>   arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi          |  6 ++--
>   arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi          |  6 ++--
>   arch/arm64/boot/dts/qcom/pmp8074.dtsi              | 27 ++++++++++-----
>   arch/arm64/boot/dts/qcom/pms405.dtsi               | 21 ++++++++----
>   arch/arm64/boot/dts/qcom/qrb5165-rb5.dts           | 15 ++++++---
>   .../boot/dts/qcom/sc7180-trogdor-coachz-r1.dts     |  4 +--
>   .../arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi |  3 +-
>   .../boot/dts/qcom/sc7180-trogdor-homestar.dtsi     |  3 +-
>   arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi |  2 +-
>   .../boot/dts/qcom/sc7180-trogdor-pompom-r1.dts     |  2 +-
>   .../boot/dts/qcom/sc7180-trogdor-pompom-r2.dts     |  2 +-
>   .../arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi |  3 +-
>   .../boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi  |  3 +-
>   arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi       |  3 +-
>   arch/arm64/boot/dts/qcom/sc7280-idp.dts            |  2 +-
>   arch/arm64/boot/dts/qcom/sc7280-idp.dtsi           |  2 +-
>   arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi         |  4 +--
>   .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts     | 26 +++++++--------
>   arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi         | 10 +++---
>   arch/arm64/boot/dts/qcom/sdm845-mtp.dts            | 12 +++----
>   .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts   | 15 ++++++---
>   arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts  |  6 ++--
>   arch/arm64/boot/dts/qcom/sm8250-mtp.dts            | 21 ++++++++----
>   37 files changed, 231 insertions(+), 163 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Bjorn Andersson Aug. 3, 2023, 4:38 p.m. UTC | #2
On Sun, 30 Jul 2023 22:31:24 +0200, Marijn Suijten wrote:
> As discussed in [1] it is more convenient to use a generic `channel`
> node name for ADC channels while storing a friendly - board-specific
> instead of PMIC-specific - name in the label, if/when desired to
> overwrite the channel description already contained (but previously
> unused) in the driver [2].
> 
> The same `channel` node name pattern has also been set in
> iio/adc/adc.yaml, but this generic binding is not inherited as base for
> qcom,spmi-vadc bindings due to not having any other generic elements in
> common, besides the node name rule and reg property.
> 
> [...]

Applied, thanks!

[1/2] ARM: dts: qcom: Use labels with generic node names for ADC channels
      commit: 04601b9b1b67888b7e2987e31ab40637f7c999c0

Best regards,