mbox series

[v12,0/2] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066

Message ID 20230726052245.609987-1-quic_tjiang@quicinc.com
Headers show
Series Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066 | expand

Message

Tim Jiang July 26, 2023, 5:22 a.m. UTC 
Changes in v12
 - fix compile error issue for patch 1/2

Changes in v11
 - reverse two patches order

Changes in v10
 - break out btsoc type print into seperate patch

Changes in v2-v9
 - solve review comments for code style and commit message context


Tim Jiang (2):
  Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066
  Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA2066

 drivers/bluetooth/btqca.c   | 76 ++++++++++++++++++++++++++++++++++++-
 drivers/bluetooth/btqca.h   |  4 +-
 drivers/bluetooth/hci_qca.c | 41 ++++++++++++++++++--
 3 files changed, 114 insertions(+), 7 deletions(-)

Comments

Tim Jiang July 27, 2023, 4:34 a.m. UTC | #1 
Hi Johan:

   I will address your comments in v13 version.


regards

On 7/26/23 14:59, Johan Hovold wrote:
> Please fix up the subject of this patch, which should be different from
> patch 2/2 and instead summarise what *this* patch does.
>
> Note that keeping the same 2/2 subject on the cover letter is fine as
> 2/2 is the primary patch and sort of summarises the series.
>
> On Wed, Jul 26, 2023 at 01:22:44PM +0800, Tim Jiang wrote:
>> This patch make the print btsoc type expression more clearly.
>>
>> Signed-off-by: Tim Jiang <quic_tjiang@quicinc.com>
>> ---
>>   drivers/bluetooth/btqca.h   |  1 +
>>   drivers/bluetooth/hci_qca.c | 34 ++++++++++++++++++++++++++++++----
>>   2 files changed, 31 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index b884095bcd9d..529382f0abb1 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -148,6 +148,7 @@ enum qca_btsoc_type {
>>   	QCA_QCA6390,
>>   	QCA_WCN6750,
>>   	QCA_WCN6855,
>> +	QCA_QCA2066,
> This belongs in the next patch.
>
> These are currently not sorted by probably should be to make it easier
> to look up and add new entries. This could be done in a third,
> preparatory, patch.
>
>>   };
>>   
>>   #if IS_ENABLED(CONFIG_BT_QCA)
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 9b785c947d96..453000df7aec 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -1748,6 +1748,7 @@ static int qca_setup(struct hci_uart *hu)
>>   	const char *firmware_name = qca_get_firmware_name(hu);
>>   	int ret;
>>   	struct qca_btsoc_version ver;
>> +	const char *soc_name;
>>   
>>   	ret = qca_check_speeds(hu);
>>   	if (ret)
>> @@ -1762,10 +1763,35 @@ static int qca_setup(struct hci_uart *hu)
>>   	 */
>>   	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>>   
>> -	bt_dev_info(hdev, "setting up %s",
>> -		qca_is_wcn399x(soc_type) ? "wcn399x" :
>> -		(soc_type == QCA_WCN6750) ? "wcn6750" :
>> -		(soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
>> +	switch (soc_type) {
>> +	case QCA_AR3002:
>> +		soc_name = "ar300x";
>> +		break;
>> +	case QCA_ROME:
>> +		soc_name = "ROME";
>> +		break;
>> +	case QCA_WCN3990:
>> +	case QCA_WCN3991:
>> +	case QCA_WCN3998:
>> +		soc_name = "wcn399x";
>> +		break;
>> +	case QCA_QCA2066:
>> +		soc_name = "QCA2066";
>> +		break;
> This also belongs in the next patch.
>
>> +	case QCA_QCA6390:
>> +		soc_name = "QCA6390";
>> +		break;
>> +	case QCA_WCN6750:
>> +		soc_name = "wcn6750";
>> +		break;
>> +	case QCA_WCN6855:
>> +		soc_name = "wcn6855";
>> +		break;
>> +	default:
>> +		soc_name = "unknown soc";
>> +		break;
>> +	}
> And you should probably sort the above as well.
>
>> +	bt_dev_info(hdev, "setting up %s", soc_name);
>>   
>>   	qca->memdump_state = QCA_MEMDUMP_IDLE;
> Johan