mbox series

[v2,0/7] arm64: dts: qcom: sa8775p: add more IOMMUs

Message ID 20230406200723.552644-1-brgl@bgdev.pl
Headers show
Series arm64: dts: qcom: sa8775p: add more IOMMUs | expand

Message

Bartosz Golaszewski April 6, 2023, 8:07 p.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add the GPU and PCIe IOMMUs for sa8775p platforms as well as the required
GPU clock controller driver.

v1 -> v2:
- remove unused include in the GPUCC driver
- remove unused clock from the GPUCC driver and make it compatible
  with the generic QCom GPUCC bindings
- put the new defconfig option in the right place (as per savedefconfig)
  and make the GPUCC driver a module rather than built-in
- describe the smmu clocks for sa8775p in dt-bindings

Bartosz Golaszewski (6):
  dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
  arm64: defconfig: enable the SA8775P GPUCC driver
  dt-bindings: iommu: arm,smmu: enable clocks for sa8775p
  arm64: dts: qcom: sa8775p: add the pcie smmu node
  arm64: dts: qcom: sa8775p: add the GPU clock controller node
  arm64: dts: qcom: sa8775p: add the GPU IOMMU node

Shazad Hussain (1):
  clk: qcom: add the GPUCC driver for sa8775p

 .../devicetree/bindings/clock/qcom,gpucc.yaml |   2 +
 .../devicetree/bindings/iommu/arm,smmu.yaml   |   5 +-
 arch/arm64/boot/dts/qcom/sa8775p.dtsi         | 124 ++++
 arch/arm64/configs/defconfig                  |   1 +
 drivers/clk/qcom/Kconfig                      |   8 +
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/gpucc-sa8775p.c              | 625 ++++++++++++++++++
 .../dt-bindings/clock/qcom,sa8775p-gpucc.h    |  50 ++
 8 files changed, 814 insertions(+), 2 deletions(-)
 create mode 100644 drivers/clk/qcom/gpucc-sa8775p.c
 create mode 100644 include/dt-bindings/clock/qcom,sa8775p-gpucc.h