| Message ID | 20230313-topic-tama_disp-v3-0-2b1567c039d7@linaro.org |
|---|---|
| Headers | show |
| Series | Sony SDM845 panel and remoteproc enablement | expand |
On Wed, 29 Mar 2023 21:41:17 +0200, Konrad Dybcio wrote: > v2 -> v3: > - Fix pinctrl-n / -names ordering [1/6], [2/6] > - Drop unnecessary #-cells [1/6] > - Drop GPIO52 (it's apparently some LCD mode, single vs dual port, > not sure how real it is considering it came from messy downstream > code and not touching it at all does not seem to break anything) [1/6] > - Use interrupts-extended instead of interrupt-parent+interrupts [2/6] > > [...] Applied, thanks! [1/6] arm64: dts: qcom: sdm845-tama: Add display nodes commit: 5dcc6587fde26fa03fe6993278d9bd01daed09b1 [2/6] arm64: dts: qcom: sdm845-tama: Add Synaptics Touchscreen commit: 3ab8216de2fab6a6efeb5b22d8d61676b67964dc [3/6] arm64: dts: qcom: sdm845-tama: Add regulator-system-load to l14a/l28a commit: 1d99fee382a6ada0cd05ae8afaea2dd1884c58a3 [4/6] arm64: dts: qcom: sdm845-tama: Enable remoteprocs commit: 39e0f8076f6fc5022902c62f5046ad91cf2b7a59 [5/6] arm64: dts: qcom: sdm845-tama: Enable GPU commit: ff9108ea69adc0b38e5bbc8575434355f0e20579 [6/6] arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1 commit: da51e2ceedc2df7248bad6bec45ae3280de9ada2 Best regards,
v2 -> v3: - Fix pinctrl-n / -names ordering [1/6], [2/6] - Drop unnecessary #-cells [1/6] - Drop GPIO52 (it's apparently some LCD mode, single vs dual port, not sure how real it is considering it came from messy downstream code and not touching it at all does not seem to break anything) [1/6] - Use interrupts-extended instead of interrupt-parent+interrupts [2/6] 2/6 is still a total OF abuse and very RFC-ish, pending comments or ideas! v2: https://lore.kernel.org/r/20230313-topic-tama_disp-v2-0-37ececf43770@linaro.org v1 -> v2: - Drop akatsuki touch panel as Marijn figures out some sleep-related things - No more dependencies, the panel driver has been merged into drm-misc next - "*-pin" { -> "*-pins {" - treset-gpios -> touch-reset-gpios - Drop "Don't use 0x in unit address" (solved) - Drop IPA & modem, this keeps crashing for some reason.. 2/7 is a total OF abuse and very RFC-ish.. v1: https://lore.kernel.org/lkml/20220930191049.123256-2-konrad.dybcio@somainline.org/ This series enables display and touch panel on XZ2/XZ2c devices equipped with a JDI panel with a TD4353 driver IC and just touch panel for all XZ3 phones. It also enables the remote processors, GPU&GMU and GPI DMA on all Tama devices. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- Konrad Dybcio (6): arm64: dts: qcom: sdm845-tama: Add display nodes [RFC] arm64: dts: qcom: sdm845-tama: Add Synaptics Touchscreen arm64: dts: qcom: sdm845-tama: Add regulator-system-load to l14a/l28a arm64: dts: qcom: sdm845-tama: Enable remoteprocs arm64: dts: qcom: sdm845-tama: Enable GPU arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1 .../dts/qcom/sdm845-sony-xperia-tama-akari.dts | 4 + .../dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts | 47 ++++- .../dts/qcom/sdm845-sony-xperia-tama-apollo.dts | 6 + .../boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 199 ++++++++++++++++++++- 4 files changed, 253 insertions(+), 3 deletions(-) --- base-commit: 198925fae644b0099b66fac1d972721e6e563b17 change-id: 20230313-topic-tama_disp-f38a116f52df Best regards,