mbox series

[net-next,v2,0/5] net: ipa: change GSI firmware load specification

Message ID 20221115113119.249893-1-elder@linaro.org
Headers show
Series net: ipa: change GSI firmware load specification | expand

Message

Alex Elder Nov. 15, 2022, 11:31 a.m. UTC
Version 2 of this series modifies the first patch only.  One section
in the description is reworded, and the example now consistenly
describes the SC7180 SoC, both as suggested by Krzysztof.

Currently, GSI firmware must be loaded for IPA before it can be
used--either by the modem, or by the AP.  New hardware supports a
third option, with the bootloader taking responsibility for loading
GSI firmware.  In that case, neither the AP nor the modem needs to
do that.

The first patch in this series deprecates the "modem-init" Device
Tree property in the IPA binding, using a new "qcom,gsi-loader"
property instead.  The second and third implement logic in the code
to support either the "old" or the "new" way of specifying how GSI
firmware is loaded.

The last two patches implement a new value for the "qcom,gsi-loader"
property.  If the value is "skip", neither the AP nor modem needs to
load the GSI firmware.  The first of these patches implements the
change in the IPA binding; the second implements it in the code.

					-Alex

Alex Elder (5):
  dt-bindings: net: qcom,ipa: deprecate modem-init
  net: ipa: encapsulate decision about firmware load
  net: ipa: introduce "qcom,gsi-loader" property
  dt-bindings: net: qcom,ipa: support skipping GSI firmware load
  net: ipa: permit GSI firmware loading to be skipped

 .../devicetree/bindings/net/qcom,ipa.yaml     | 78 +++++++++++----
 drivers/net/ipa/ipa_main.c                    | 95 +++++++++++++++----
 2 files changed, 135 insertions(+), 38 deletions(-)