mbox series

[v2,0/5] Consolidate RPM interconnect and support to MSM8939

Message ID 20201204075345.5161-1-jun.nie@linaro.org
Headers show
Series Consolidate RPM interconnect and support to MSM8939 | expand

Message

Jun Nie Dec. 4, 2020, 7:53 a.m. UTC
This patch set split shared RPM based interconnect operation code and add
support to MSM8939 interconnect.

Changes vs V1:
  - Rebase to latest icc code.
  - Remove unnecessary comment and info.
  - Fix some format issues.

Jun Nie (5):
  interconnect: qcom: Consolidate interconnect RPM support
  interconnect: qcom: qcs404: use shared code
  dt-bindings: interconnect: single yaml file for RPM interconnect
    drivers
  dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings
  interconnect: qcom: Add MSM8939 interconnect provider driver

 .../bindings/interconnect/qcom,qcs404.yaml    |  77 ----
 .../{qcom,msm8916.yaml => qcom,rpm.yaml}      |  22 +-
 drivers/interconnect/qcom/Kconfig             |   9 +
 drivers/interconnect/qcom/Makefile            |   4 +-
 drivers/interconnect/qcom/icc-rpm.c           | 191 ++++++++++
 drivers/interconnect/qcom/icc-rpm.h           |  73 ++++
 drivers/interconnect/qcom/msm8916.c           | 241 +-----------
 drivers/interconnect/qcom/msm8939.c           | 355 ++++++++++++++++++
 drivers/interconnect/qcom/qcs404.c            | 242 +-----------
 .../dt-bindings/interconnect/qcom,msm8939.h   | 105 ++++++
 10 files changed, 769 insertions(+), 550 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.yaml
 rename Documentation/devicetree/bindings/interconnect/{qcom,msm8916.yaml => qcom,rpm.yaml} (77%)
 create mode 100644 drivers/interconnect/qcom/icc-rpm.c
 create mode 100644 drivers/interconnect/qcom/icc-rpm.h
 create mode 100644 drivers/interconnect/qcom/msm8939.c
 create mode 100644 include/dt-bindings/interconnect/qcom,msm8939.h


base-commit: bfd521e1af519bb7096efc845f6a64a7de28c472
-- 
2.17.1

Comments

AngeloGioacchino Del Regno Dec. 4, 2020, 6:04 p.m. UTC | #1
Il 04/12/20 08:53, Jun Nie ha scritto:
> Add RPM based interconnect driver implements the set and aggregate
> functionalities that translates bandwidth requests into RPM messages.
> These modules provide a common set of functionalities for all
> Qualcomm RPM based interconnect providers and should help reduce code
> duplication when adding new providers.
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
Hello!
I agree, the RPM based ICC should be commonized... in any case, I think
that you should rebase your patch series over mine, where I am adding
support for SDM660 and also introducing a mechanism to set QoS, which
can actually be used by most platforms managing the ICC over RPM.

Please, check it out: https://lore.kernel.org/patchwork/patch/1322131/

Thanks,
Angelo

> ---
>   drivers/interconnect/qcom/Makefile  |   2 +-
>   drivers/interconnect/qcom/icc-rpm.c | 191 ++++++++++++++++++++++
>   drivers/interconnect/qcom/icc-rpm.h |  73 +++++++++
>   drivers/interconnect/qcom/msm8916.c | 241 ++--------------------------
>   4 files changed, 275 insertions(+), 232 deletions(-)
>   create mode 100644 drivers/interconnect/qcom/icc-rpm.c
>   create mode 100644 drivers/interconnect/qcom/icc-rpm.h
> 
> diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
> index cf628f7990cd..916d7bbe55b7 100644
> --- a/drivers/interconnect/qcom/Makefile
> +++ b/drivers/interconnect/qcom/Makefile
> @@ -10,7 +10,7 @@ qnoc-sc7180-objs			:= sc7180.o
>   qnoc-sdm845-objs			:= sdm845.o
>   qnoc-sm8150-objs			:= sm8150.o
>   qnoc-sm8250-objs			:= sm8250.o
> -icc-smd-rpm-objs			:= smd-rpm.o
> +icc-smd-rpm-objs			:= smd-rpm.o icc-rpm.o
>   
>   obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o
>   obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o
> diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
> new file mode 100644
> index 000000000000..cc6095492cbe
> --- /dev/null
> +++ b/drivers/interconnect/qcom/icc-rpm.c
> @@ -0,0 +1,191 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Linaro Ltd
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/interconnect-provider.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include "smd-rpm.h"
> +#include "icc-rpm.h"
> +
> +static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
> +{
> +	struct qcom_icc_provider *qp;
> +	struct qcom_icc_node *qn;
> +	struct icc_provider *provider;
> +	struct icc_node *n;
> +	u64 sum_bw;
> +	u64 max_peak_bw;
> +	u64 rate;
> +	u32 agg_avg = 0;
> +	u32 agg_peak = 0;
> +	int ret, i;
> +
> +	qn = src->data;
> +	provider = src->provider;
> +	qp = to_qcom_provider(provider);
> +
> +	list_for_each_entry(n, &provider->nodes, node_list)
> +		provider->aggregate(n, 0, n->avg_bw, n->peak_bw,
> +				    &agg_avg, &agg_peak);
> +
> +	sum_bw = icc_units_to_bps(agg_avg);
> +	max_peak_bw = icc_units_to_bps(agg_peak);
> +
> +	/* send bandwidth request message to the RPM processor */
> +	if (qn->mas_rpm_id != -1) {
> +		ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
> +					    RPM_BUS_MASTER_REQ,
> +					    qn->mas_rpm_id,
> +					    sum_bw);
> +		if (ret) {
> +			pr_err("qcom_icc_rpm_smd_send mas %d error %d\n",
> +			       qn->mas_rpm_id, ret);
> +			return ret;
> +		}
> +	}
> +
> +	if (qn->slv_rpm_id != -1) {
> +		ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
> +					    RPM_BUS_SLAVE_REQ,
> +					    qn->slv_rpm_id,
> +					    sum_bw);
> +		if (ret) {
> +			pr_err("qcom_icc_rpm_smd_send slv error %d\n",
> +			       ret);
> +			return ret;
> +		}
> +	}
> +
> +	rate = max(sum_bw, max_peak_bw);
> +
> +	do_div(rate, qn->buswidth);
> +
> +	if (qn->rate == rate)
> +		return 0;
> +
> +	for (i = 0; i < qp->num_clks; i++) {
> +		ret = clk_set_rate(qp->bus_clks[i].clk, rate);
> +		if (ret) {
> +			pr_err("%s clk_set_rate error: %d\n",
> +			       qp->bus_clks[i].id, ret);
> +			return ret;
> +		}
> +	}
> +
> +	qn->rate = rate;
> +
> +	return 0;
> +}
> +
> +int qnoc_probe(struct platform_device *pdev, size_t cd_size, int cd_num,
> +	       const struct clk_bulk_data *cd)
> +{
> +	struct device *dev = &pdev->dev;
> +	const struct qcom_icc_desc *desc;
> +	struct icc_onecell_data *data;
> +	struct icc_provider *provider;
> +	struct qcom_icc_node **qnodes;
> +	struct qcom_icc_provider *qp;
> +	struct icc_node *node;
> +	size_t num_nodes, i;
> +	int ret;
> +
> +	/* wait for the RPM proxy */
> +	if (!qcom_icc_rpm_smd_available())
> +		return -EPROBE_DEFER;
> +
> +	desc = of_device_get_match_data(dev);
> +	if (!desc)
> +		return -EINVAL;
> +
> +	qnodes = desc->nodes;
> +	num_nodes = desc->num_nodes;
> +
> +	qp = devm_kzalloc(dev, sizeof(*qp), GFP_KERNEL);
> +	if (!qp)
> +		return -ENOMEM;
> +
> +	data = devm_kzalloc(dev, struct_size(data, nodes, num_nodes),
> +			    GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	qp->bus_clks = devm_kmemdup(dev, cd, cd_size,
> +				    GFP_KERNEL);
> +	if (!qp->bus_clks)
> +		return -ENOMEM;
> +
> +	qp->num_clks = cd_num;
> +	ret = devm_clk_bulk_get(dev, qp->num_clks, qp->bus_clks);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_bulk_prepare_enable(qp->num_clks, qp->bus_clks);
> +	if (ret)
> +		return ret;
> +
> +	provider = &qp->provider;
> +	INIT_LIST_HEAD(&provider->nodes);
> +	provider->dev = dev;
> +	provider->set = qcom_icc_set;
> +	provider->aggregate = icc_std_aggregate;
> +	provider->xlate = of_icc_xlate_onecell;
> +	provider->data = data;
> +
> +	ret = icc_provider_add(provider);
> +	if (ret) {
> +		dev_err(dev, "error adding interconnect provider: %d\n", ret);
> +		clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
> +		return ret;
> +	}
> +
> +	for (i = 0; i < num_nodes; i++) {
> +		size_t j;
> +
> +		node = icc_node_create(qnodes[i]->id);
> +		if (IS_ERR(node)) {
> +			ret = PTR_ERR(node);
> +			goto err;
> +		}
> +
> +		node->name = qnodes[i]->name;
> +		node->data = qnodes[i];
> +		icc_node_add(node, provider);
> +
> +		for (j = 0; j < qnodes[i]->num_links; j++)
> +			icc_link_create(node, qnodes[i]->links[j]);
> +
> +		data->nodes[i] = node;
> +	}
> +	data->num_nodes = num_nodes;
> +
> +	platform_set_drvdata(pdev, qp);
> +
> +	return 0;
> +err:
> +	icc_nodes_remove(provider);
> +	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
> +	icc_provider_del(provider);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(qnoc_probe);
> +
> +int qnoc_remove(struct platform_device *pdev)
> +{
> +	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
> +
> +	icc_nodes_remove(&qp->provider);
> +	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
> +	return icc_provider_del(&qp->provider);
> +}
> +EXPORT_SYMBOL(qnoc_remove);
> diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
> new file mode 100644
> index 000000000000..79a6f68249c1
> --- /dev/null
> +++ b/drivers/interconnect/qcom/icc-rpm.h
> @@ -0,0 +1,73 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2020 Linaro Ltd
> + */
> +
> +#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H
> +#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H
> +
> +#define RPM_BUS_MASTER_REQ	0x73616d62
> +#define RPM_BUS_SLAVE_REQ	0x766c7362
> +
> +#define QCOM_MAX_LINKS 12
> +
> +#define to_qcom_provider(_provider) \
> +	container_of(_provider, struct qcom_icc_provider, provider)
> +
> +/**
> + * struct qcom_icc_provider - Qualcomm specific interconnect provider
> + * @provider: generic interconnect provider
> + * @bus_clks: the clk_bulk_data table of bus clocks
> + * @num_clks: the total number of clk_bulk_data entries
> + */
> +struct qcom_icc_provider {
> +	struct icc_provider provider;
> +	struct clk_bulk_data *bus_clks;
> +	int num_clks;
> +};
> +
> +/**
> + * struct qcom_icc_node - Qualcomm specific interconnect nodes
> + * @name: the node name used in debugfs
> + * @id: a unique node identifier
> + * @links: an array of nodes where we can go next while traversing
> + * @num_links: the total number of @links
> + * @buswidth: width of the interconnect between a node and the bus (bytes)
> + * @mas_rpm_id:	RPM id for devices that are bus masters
> + * @slv_rpm_id:	RPM id for devices that are bus slaves
> + * @rate: current bus clock rate in Hz
> + */
> +struct qcom_icc_node {
> +	unsigned char *name;
> +	u16 id;
> +	u16 links[QCOM_MAX_LINKS];
> +	u16 num_links;
> +	u16 buswidth;
> +	int mas_rpm_id;
> +	int slv_rpm_id;
> +	u64 rate;
> +};
> +
> +struct qcom_icc_desc {
> +	struct qcom_icc_node **nodes;
> +	size_t num_nodes;
> +};
> +
> +#define DEFINE_QNODE(_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id,	\
> +		     ...)						\
> +		static struct qcom_icc_node _name = {			\
> +		.name = #_name,						\
> +		.id = _id,						\
> +		.buswidth = _buswidth,					\
> +		.mas_rpm_id = _mas_rpm_id,				\
> +		.slv_rpm_id = _slv_rpm_id,				\
> +		.num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })),	\
> +		.links = { __VA_ARGS__ },				\
> +	}
> +
> +
> +int qnoc_probe(struct platform_device *pdev, size_t cd_size, int cd_num,
> +	       const struct clk_bulk_data *cd);
> +int qnoc_remove(struct platform_device *pdev);
> +
> +#endif
> diff --git a/drivers/interconnect/qcom/msm8916.c b/drivers/interconnect/qcom/msm8916.c
> index e8371d40ab8d..fc3689c8947a 100644
> --- a/drivers/interconnect/qcom/msm8916.c
> +++ b/drivers/interconnect/qcom/msm8916.c
> @@ -15,9 +15,7 @@
>   #include <dt-bindings/interconnect/qcom,msm8916.h>
>   
>   #include "smd-rpm.h"
> -
> -#define RPM_BUS_MASTER_REQ      0x73616d62
> -#define RPM_BUS_SLAVE_REQ       0x766c7362
> +#include "icc-rpm.h"
>   
>   enum {
>   	MSM8916_BIMC_SNOC_MAS = 1,
> @@ -107,67 +105,11 @@ enum {
>   	MSM8916_SNOC_PNOC_SLV,
>   };
>   
> -#define to_msm8916_provider(_provider) \
> -	container_of(_provider, struct msm8916_icc_provider, provider)
> -
>   static const struct clk_bulk_data msm8916_bus_clocks[] = {
>   	{ .id = "bus" },
>   	{ .id = "bus_a" },
>   };
>   
> -/**
> - * struct msm8916_icc_provider - Qualcomm specific interconnect provider
> - * @provider: generic interconnect provider
> - * @bus_clks: the clk_bulk_data table of bus clocks
> - * @num_clks: the total number of clk_bulk_data entries
> - */
> -struct msm8916_icc_provider {
> -	struct icc_provider provider;
> -	struct clk_bulk_data *bus_clks;
> -	int num_clks;
> -};
> -
> -#define MSM8916_MAX_LINKS	8
> -
> -/**
> - * struct msm8916_icc_node - Qualcomm specific interconnect nodes
> - * @name: the node name used in debugfs
> - * @id: a unique node identifier
> - * @links: an array of nodes where we can go next while traversing
> - * @num_links: the total number of @links
> - * @buswidth: width of the interconnect between a node and the bus (bytes)
> - * @mas_rpm_id:	RPM ID for devices that are bus masters
> - * @slv_rpm_id:	RPM ID for devices that are bus slaves
> - * @rate: current bus clock rate in Hz
> - */
> -struct msm8916_icc_node {
> -	unsigned char *name;
> -	u16 id;
> -	u16 links[MSM8916_MAX_LINKS];
> -	u16 num_links;
> -	u16 buswidth;
> -	int mas_rpm_id;
> -	int slv_rpm_id;
> -	u64 rate;
> -};
> -
> -struct msm8916_icc_desc {
> -	struct msm8916_icc_node **nodes;
> -	size_t num_nodes;
> -};
> -
> -#define DEFINE_QNODE(_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id,	\
> -					...)				\
> -		static struct msm8916_icc_node _name = {		\
> -		.name = #_name,						\
> -		.id = _id,						\
> -		.buswidth = _buswidth,					\
> -		.mas_rpm_id = _mas_rpm_id,				\
> -		.slv_rpm_id = _slv_rpm_id,				\
> -		.num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })),	\
> -		.links = { __VA_ARGS__ },				\
> -	}
> -
>   DEFINE_QNODE(bimc_snoc_mas, MSM8916_BIMC_SNOC_MAS, 8, -1, -1, MSM8916_BIMC_SNOC_SLV);
>   DEFINE_QNODE(bimc_snoc_slv, MSM8916_BIMC_SNOC_SLV, 8, -1, -1, MSM8916_SNOC_INT_0, MSM8916_SNOC_INT_1);
>   DEFINE_QNODE(mas_apss, MSM8916_MASTER_AMPSS_M0, 8, -1, -1, MSM8916_SLAVE_EBI_CH0, MSM8916_BIMC_SNOC_MAS, MSM8916_SLAVE_AMPSS_L2);
> @@ -254,7 +196,7 @@ DEFINE_QNODE(snoc_int_bimc, MSM8916_SNOC_INT_BIMC, 8, 101, 132, MSM8916_SNOC_BIM
>   DEFINE_QNODE(snoc_pcnoc_mas, MSM8916_SNOC_PNOC_MAS, 8, -1, -1, MSM8916_SNOC_PNOC_SLV);
>   DEFINE_QNODE(snoc_pcnoc_slv, MSM8916_SNOC_PNOC_SLV, 8, -1, -1, MSM8916_PNOC_INT_0);
>   
> -static struct msm8916_icc_node *msm8916_snoc_nodes[] = {
> +static struct qcom_icc_node *msm8916_snoc_nodes[] = {
>   	[BIMC_SNOC_SLV] = &bimc_snoc_slv,
>   	[MASTER_JPEG] = &mas_jpeg,
>   	[MASTER_MDP_PORT0] = &mas_mdp,
> @@ -283,12 +225,12 @@ static struct msm8916_icc_node *msm8916_snoc_nodes[] = {
>   	[SNOC_QDSS_INT] = &qdss_int,
>   };
>   
> -static struct msm8916_icc_desc msm8916_snoc = {
> +static struct qcom_icc_desc msm8916_snoc = {
>   	.nodes = msm8916_snoc_nodes,
>   	.num_nodes = ARRAY_SIZE(msm8916_snoc_nodes),
>   };
>   
> -static struct msm8916_icc_node *msm8916_bimc_nodes[] = {
> +static struct qcom_icc_node *msm8916_bimc_nodes[] = {
>   	[BIMC_SNOC_MAS] = &bimc_snoc_mas,
>   	[MASTER_AMPSS_M0] = &mas_apss,
>   	[MASTER_GRAPHICS_3D] = &mas_gfx,
> @@ -300,12 +242,12 @@ static struct msm8916_icc_node *msm8916_bimc_nodes[] = {
>   	[SNOC_BIMC_1_SLV] = &snoc_bimc_1_slv,
>   };
>   
> -static struct msm8916_icc_desc msm8916_bimc = {
> +static struct qcom_icc_desc msm8916_bimc = {
>   	.nodes = msm8916_bimc_nodes,
>   	.num_nodes = ARRAY_SIZE(msm8916_bimc_nodes),
>   };
>   
> -static struct msm8916_icc_node *msm8916_pcnoc_nodes[] = {
> +static struct qcom_icc_node *msm8916_pcnoc_nodes[] = {
>   	[MASTER_BLSP_1] = &mas_blsp_1,
>   	[MASTER_DEHR] = &mas_dehr,
>   	[MASTER_LPASS] = &mas_audio,
> @@ -358,178 +300,15 @@ static struct msm8916_icc_node *msm8916_pcnoc_nodes[] = {
>   	[SNOC_PCNOC_SLV] = &snoc_pcnoc_slv,
>   };
>   
> -static struct msm8916_icc_desc msm8916_pcnoc = {
> +static struct qcom_icc_desc msm8916_pcnoc = {
>   	.nodes = msm8916_pcnoc_nodes,
>   	.num_nodes = ARRAY_SIZE(msm8916_pcnoc_nodes),
>   };
>   
> -static int msm8916_icc_set(struct icc_node *src, struct icc_node *dst)
> -{
> -	struct msm8916_icc_provider *qp;
> -	struct msm8916_icc_node *qn;
> -	u64 sum_bw, max_peak_bw, rate;
> -	u32 agg_avg = 0, agg_peak = 0;
> -	struct icc_provider *provider;
> -	struct icc_node *n;
> -	int ret, i;
> -
> -	qn = src->data;
> -	provider = src->provider;
> -	qp = to_msm8916_provider(provider);
> -
> -	list_for_each_entry(n, &provider->nodes, node_list)
> -		provider->aggregate(n, 0, n->avg_bw, n->peak_bw,
> -				    &agg_avg, &agg_peak);
> -
> -	sum_bw = icc_units_to_bps(agg_avg);
> -	max_peak_bw = icc_units_to_bps(agg_peak);
> -
> -	/* send bandwidth request message to the RPM processor */
> -	if (qn->mas_rpm_id != -1) {
> -		ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
> -					    RPM_BUS_MASTER_REQ,
> -					    qn->mas_rpm_id,
> -					    sum_bw);
> -		if (ret) {
> -			pr_err("qcom_icc_rpm_smd_send mas %d error %d\n",
> -			       qn->mas_rpm_id, ret);
> -			return ret;
> -		}
> -	}
> -
> -	if (qn->slv_rpm_id != -1) {
> -		ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
> -					    RPM_BUS_SLAVE_REQ,
> -					    qn->slv_rpm_id,
> -					    sum_bw);
> -		if (ret) {
> -			pr_err("qcom_icc_rpm_smd_send slv error %d\n",
> -			       ret);
> -			return ret;
> -		}
> -	}
> -
> -	rate = max(sum_bw, max_peak_bw);
> -
> -	do_div(rate, qn->buswidth);
> -
> -	if (qn->rate == rate)
> -		return 0;
> -
> -	for (i = 0; i < qp->num_clks; i++) {
> -		ret = clk_set_rate(qp->bus_clks[i].clk, rate);
> -		if (ret) {
> -			pr_err("%s clk_set_rate error: %d\n",
> -			       qp->bus_clks[i].id, ret);
> -			return ret;
> -		}
> -	}
> -
> -	qn->rate = rate;
> -
> -	return 0;
> -}
> -
>   static int msm8916_qnoc_probe(struct platform_device *pdev)
>   {
> -	const struct msm8916_icc_desc *desc;
> -	struct msm8916_icc_node **qnodes;
> -	struct msm8916_icc_provider *qp;
> -	struct device *dev = &pdev->dev;
> -	struct icc_onecell_data *data;
> -	struct icc_provider *provider;
> -	struct icc_node *node;
> -	size_t num_nodes, i;
> -	int ret;
> -
> -	/* wait for the RPM proxy */
> -	if (!qcom_icc_rpm_smd_available())
> -		return -EPROBE_DEFER;
> -
> -	desc = of_device_get_match_data(dev);
> -	if (!desc)
> -		return -EINVAL;
> -
> -	qnodes = desc->nodes;
> -	num_nodes = desc->num_nodes;
> -
> -	qp = devm_kzalloc(dev, sizeof(*qp), GFP_KERNEL);
> -	if (!qp)
> -		return -ENOMEM;
> -
> -	data = devm_kzalloc(dev, struct_size(data, nodes, num_nodes),
> -			    GFP_KERNEL);
> -	if (!data)
> -		return -ENOMEM;
> -
> -	qp->bus_clks = devm_kmemdup(dev, msm8916_bus_clocks,
> -				    sizeof(msm8916_bus_clocks), GFP_KERNEL);
> -	if (!qp->bus_clks)
> -		return -ENOMEM;
> -
> -	qp->num_clks = ARRAY_SIZE(msm8916_bus_clocks);
> -	ret = devm_clk_bulk_get(dev, qp->num_clks, qp->bus_clks);
> -	if (ret)
> -		return ret;
> -
> -	ret = clk_bulk_prepare_enable(qp->num_clks, qp->bus_clks);
> -	if (ret)
> -		return ret;
> -
> -	provider = &qp->provider;
> -	INIT_LIST_HEAD(&provider->nodes);
> -	provider->dev = dev;
> -	provider->set = msm8916_icc_set;
> -	provider->aggregate = icc_std_aggregate;
> -	provider->xlate = of_icc_xlate_onecell;
> -	provider->data = data;
> -
> -	ret = icc_provider_add(provider);
> -	if (ret) {
> -		dev_err(dev, "error adding interconnect provider: %d\n", ret);
> -		clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
> -		return ret;
> -	}
> -
> -	for (i = 0; i < num_nodes; i++) {
> -		size_t j;
> -
> -		node = icc_node_create(qnodes[i]->id);
> -		if (IS_ERR(node)) {
> -			ret = PTR_ERR(node);
> -			goto err;
> -		}
> -
> -		node->name = qnodes[i]->name;
> -		node->data = qnodes[i];
> -		icc_node_add(node, provider);
> -
> -		for (j = 0; j < qnodes[i]->num_links; j++)
> -			icc_link_create(node, qnodes[i]->links[j]);
> -
> -		data->nodes[i] = node;
> -	}
> -	data->num_nodes = num_nodes;
> -
> -	platform_set_drvdata(pdev, qp);
> -
> -	return 0;
> -
> -err:
> -	icc_nodes_remove(provider);
> -	icc_provider_del(provider);
> -	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
> -
> -	return ret;
> -}
> -
> -static int msm8916_qnoc_remove(struct platform_device *pdev)
> -{
> -	struct msm8916_icc_provider *qp = platform_get_drvdata(pdev);
> -
> -	icc_nodes_remove(&qp->provider);
> -	clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
> -	return icc_provider_del(&qp->provider);
> +	return qnoc_probe(pdev, sizeof(msm8916_bus_clocks),
> +			  ARRAY_SIZE(msm8916_bus_clocks), msm8916_bus_clocks);
>   }
>   
>   static const struct of_device_id msm8916_noc_of_match[] = {
> @@ -542,7 +321,7 @@ MODULE_DEVICE_TABLE(of, msm8916_noc_of_match);
>   
>   static struct platform_driver msm8916_noc_driver = {
>   	.probe = msm8916_qnoc_probe,
> -	.remove = msm8916_qnoc_remove,
> +	.remove = qnoc_remove,
>   	.driver = {
>   		.name = "qnoc-msm8916",
>   		.of_match_table = msm8916_noc_of_match,
>
patchwork-bot+linux-arm-msm@kernel.org March 1, 2021, 7:59 p.m. UTC | #2
Hello:

This series was applied to qcom/linux.git (refs/heads/for-next):

On Fri,  4 Dec 2020 15:53:40 +0800 you wrote:
> This patch set split shared RPM based interconnect operation code and add

> support to MSM8939 interconnect.

> 

> Changes vs V1:

>   - Rebase to latest icc code.

>   - Remove unnecessary comment and info.

>   - Fix some format issues.

> 

> [...]


Here is the summary with links:
  - [v2,1/5] interconnect: qcom: Consolidate interconnect RPM support
    https://git.kernel.org/qcom/c/62feb14ee8a3
  - [v2,2/5] interconnect: qcom: qcs404: use shared code
    https://git.kernel.org/qcom/c/dfbd988f1ce6
  - [v2,3/5] dt-bindings: interconnect: single yaml file for RPM interconnect drivers
    https://git.kernel.org/qcom/c/4187f9c16b7d
  - [v2,4/5] dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings
    https://git.kernel.org/qcom/c/4ec908d21040
  - [v2,5/5] interconnect: qcom: Add MSM8939 interconnect provider driver
    https://git.kernel.org/qcom/c/6c6fe5d3dc5e

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html