mbox series

[v2,0/5] clk/qcom: Support gdsc collapse polling using 'reset' inteface

Message ID 1660748274-39239-1-git-send-email-quic_akhilpo@quicinc.com
Headers show
Series clk/qcom: Support gdsc collapse polling using 'reset' inteface | expand

Message

Akhil P Oommen Aug. 17, 2022, 2:57 p.m. UTC 
Some clients like adreno gpu driver would like to ensure that its gdsc
is collapsed at hardware during a gpu reset sequence. This is because it
has a votable gdsc which could be ON due to a vote from another subsystem
like tz, hyp etc or due to an internal hardware signal. To allow
this, gpucc driver can expose an interface to the client driver using
reset framework. Using this the client driver can trigger a polling within
the gdsc driver.

This series is rebased on top of linus's master branch.

Related discussion: https://patchwork.freedesktop.org/patch/493144/

Changes in v2:
- Return error when a particular custom reset op is not implemented. (Dmitry)

Akhil P Oommen (5):
  dt-bindings: clk: qcom: Support gpu cx gdsc reset
  clk: qcom: Allow custom reset ops
  clk: qcom: gdsc: Add a reset op to poll gdsc collapse
  clk: qcom: gpucc-sc7280: Add cx collapse reset support
  arm64: dts: qcom: sc7280: Add Reset support for gpu

 arch/arm64/boot/dts/qcom/sc7280.dtsi          |  3 +++
 drivers/clk/qcom/gdsc.c                       | 23 +++++++++++++++++++----
 drivers/clk/qcom/gdsc.h                       |  7 +++++++
 drivers/clk/qcom/gpucc-sc7280.c               | 10 ++++++++++
 drivers/clk/qcom/reset.c                      | 27 +++++++++++++++++++++++++++
 drivers/clk/qcom/reset.h                      |  8 ++++++++
 include/dt-bindings/clock/qcom,gpucc-sc7280.h |  3 +++
 7 files changed, 77 insertions(+), 4 deletions(-)

Comments

Krzysztof Kozlowski Aug. 18, 2022, 7:10 a.m. UTC | #1 
On 17/08/2022 17:57, Akhil P Oommen wrote:

Thank you for your patch. There is something to discuss/improve.

>  
>  	return regmap_update_bits(rst->regmap, map->reg, mask, 0);
> diff --git a/drivers/clk/qcom/reset.h b/drivers/clk/qcom/reset.h
> index 2a08b5e..d4213b4 100644
> --- a/drivers/clk/qcom/reset.h
> +++ b/drivers/clk/qcom/reset.h
> @@ -8,9 +8,17 @@
>  
>  #include <linux/reset-controller.h>
>  
> +struct qcom_reset_ops {
> +	int (*reset)(void *priv);
> +	int (*assert)(void *priv);
> +	int (*deassert)(void *priv);
> +};
> +
>  struct qcom_reset_map {
>  	unsigned int reg;
>  	u8 bit;
> +	struct qcom_reset_ops *ops;

This should be pointer to const.


Best regards,
Krzysztof