mbox series

[V4,0/3] Add SC7180 interconnect provider driver

Message ID 1582646384-1458-1-git-send-email-okukatla@codeaurora.org
Headers show
Series Add SC7180 interconnect provider driver | expand

Message

Odelu Kukatla Feb. 25, 2020, 3:59 p.m. UTC 
Add driver to support scaling of the on-chip interconnects on
the SC7180-based platforms.

Depends-on: Split SDM845 interconnect nodes and consolidate RPMh support
Depends-on: Add device tree support for sc7180

Odelu Kukatla (3):
  dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings
  interconnect: qcom: Add SC7180 interconnect provider driver
  arm64: dts: sc7180: Add interconnect provider DT nodes

 .../bindings/interconnect/qcom,sc7180.yaml         |  85 +++
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |  95 +++
 drivers/interconnect/qcom/Kconfig                  |   9 +
 drivers/interconnect/qcom/Makefile                 |   2 +
 drivers/interconnect/qcom/sc7180.c                 | 641 +++++++++++++++++++++
 drivers/interconnect/qcom/sc7180.h                 | 149 +++++
 include/dt-bindings/interconnect/qcom,sc7180.h     | 161 ++++++
 7 files changed, 1142 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml
 create mode 100644 drivers/interconnect/qcom/sc7180.c
 create mode 100644 drivers/interconnect/qcom/sc7180.h
 create mode 100644 include/dt-bindings/interconnect/qcom,sc7180.h

Comments

Matthias Kaehlcke Feb. 27, 2020, 5:12 p.m. UTC | #1 
On Tue, Feb 25, 2020 at 09:29:44PM +0530, Odelu Kukatla wrote:
> Add the DT nodes for the network-on-chip interconnect buses found
> on sc7180-based platforms.
> 
> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 95 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 95 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index cc5a94f..3e28f34 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi

v2 had:

+#include <dt-bindings/interconnect/qcom,sc7180.h>

I think we still want that, otherwise some patch that adds an
interconnect configuration for SC7180 needs to add it (see also
https://patchwork.kernel.org/patch/11386485/#23187545)