From patchwork Mon Dec 15 11:59:08 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lee Jones X-Patchwork-Id: 42244 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-lb0-f200.google.com (mail-lb0-f200.google.com [209.85.217.200]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id 3294921772 for ; Mon, 15 Dec 2014 11:59:51 +0000 (UTC) Received: by mail-lb0-f200.google.com with SMTP id f15sf7235606lbj.3 for ; Mon, 15 Dec 2014 03:59:50 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:mime-version:delivered-to:from:to:cc:subject :date:message-id:in-reply-to:references:sender:precedence:list-id :x-original-sender:x-original-authentication-results:mailing-list :list-post:list-help:list-archive:list-unsubscribe; bh=79UYr22fdURxoCfc04r1WKQ4HDJwR6M54SdOVJA+kCY=; b=UhNQHJL2ID7HJ5PL6iFXqVwv4oT7/n1ueXMpS4gKsxbKuQJ45bRgQJPnrUxp9VTn/C yO2yILQxFi6mord0OoBStGSvqSYgbmWTzpEZMFudZaeJzp5/hisrSbPsIpgLOW6v4WfG z1jZYsy4MUfzKiQLQPmI7pVnEPdkG1hAT+CmHBHVHCYI/feEhi3MxD2ApmllPnmgmB1Z +2KZQP54EdoBP80jwQEMi+ODZor0LuOY8mjY2TRS83ouL2PoG21a/l0GCJaQEaqPrhI9 TGPrLQJZifWqZw5yB+B9xP0u/6Vp8i6YjO9b6LHHenTLDgsjdj4BoXUnuz6eVLN1OXlS vXBA== X-Gm-Message-State: ALoCoQkrKATaZvjSAnALlIEvDzRe8fiRas7ThCCB4kf2cF/MOHp8Fz9hEXPJ5CYuzaKG9yoE/Cv9 X-Received: by 10.152.7.99 with SMTP id i3mr127566laa.9.1418644790119; Mon, 15 Dec 2014 03:59:50 -0800 (PST) MIME-Version: 1.0 X-BeenThere: patchwork-forward@linaro.org Received: by 10.152.22.72 with SMTP id b8ls426276laf.6.gmail; Mon, 15 Dec 2014 03:59:49 -0800 (PST) X-Received: by 10.112.150.71 with SMTP id ug7mr29713677lbb.73.1418644789872; Mon, 15 Dec 2014 03:59:49 -0800 (PST) Received: from mail-lb0-f178.google.com (mail-lb0-f178.google.com. [209.85.217.178]) by mx.google.com with ESMTPS id w6si10237683laa.37.2014.12.15.03.59.49 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Mon, 15 Dec 2014 03:59:49 -0800 (PST) Received-SPF: pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.217.178 as permitted sender) client-ip=209.85.217.178; Received: by mail-lb0-f178.google.com with SMTP id f15so10055147lbj.9 for ; Mon, 15 Dec 2014 03:59:49 -0800 (PST) X-Received: by 10.112.219.37 with SMTP id pl5mr27035945lbc.25.1418644789773; Mon, 15 Dec 2014 03:59:49 -0800 (PST) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patch@linaro.org Received: by 10.112.142.69 with SMTP id ru5csp691794lbb; Mon, 15 Dec 2014 03:59:48 -0800 (PST) X-Received: by 10.68.215.100 with SMTP id oh4mr50581959pbc.11.1418644787628; Mon, 15 Dec 2014 03:59:47 -0800 (PST) Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id lm4si13495752pab.217.2014.12.15.03.59.44 for ; Mon, 15 Dec 2014 03:59:47 -0800 (PST) Received-SPF: none (google.com: linux-kernel-owner@vger.kernel.org does not designate permitted sender hosts) client-ip=209.132.180.67; Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751104AbaLOL7g (ORCPT + 27 others); Mon, 15 Dec 2014 06:59:36 -0500 Received: from mail-yh0-f52.google.com ([209.85.213.52]:61603 "EHLO mail-yh0-f52.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750912AbaLOL7b (ORCPT ); Mon, 15 Dec 2014 06:59:31 -0500 Received: by mail-yh0-f52.google.com with SMTP id z6so5003264yhz.25 for ; Mon, 15 Dec 2014 03:59:31 -0800 (PST) X-Received: by 10.236.63.163 with SMTP id a23mr21229080yhd.41.1418644771181; Mon, 15 Dec 2014 03:59:31 -0800 (PST) Received: from localhost.localdomain (host109-148-232-11.range109-148.btcentralplus.com. [109.148.232.11]) by mx.google.com with ESMTPSA id d91sm5783468yhq.53.2014.12.15.03.59.28 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 15 Dec 2014 03:59:30 -0800 (PST) From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, computersforpeace@gmail.com, linux-mtd@lists.infradead.org Cc: lee.jones@linaro.org, kernel@stlinux.com, Angus Clark Subject: [PATCH v3 01/13] mtd: st_spi_fsm: Extend fsm_clear_fifo to handle unwanted bytes Date: Mon, 15 Dec 2014 11:59:08 +0000 Message-Id: <1418644760-18773-2-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1418644760-18773-1-git-send-email-lee.jones@linaro.org> References: <1418644760-18773-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org Precedence: list List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: lee.jones@linaro.org X-Original-Authentication-Results: mx.google.com; spf=pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.217.178 as permitted sender) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , Under certain conditions, the SPI-FSM Controller can be left in a state where the data FIFO is not entirely empty. This can lead to problems where subsequent data transfers appear to have been shifted by a number of unidentified bytes. One simple example would be an errant FSM sequence which loaded more data to the FIFO than was read by the host. Another more interesting case results from an obscure artefact in the FSM Controller. When switching from data transfers in x4 or x2 mode to data transfers in x1 mode, extraneous bytes will appear in the FIFO, unless the previous data transfer was a multiple of 32 cycles (i.e. 8 bytes for x2, and 16 bytes for x4). This applies equally whether FSM is being operated directly by a S/W driver, or by the SPI boot-controller in FSM-Boot mode. Furthermore, data in the FIFO not only survive a transition between FSM-Boot and FSM, but also a S/W reset of IP block [1]. By taking certain precautions, it is possible to prevent the driver from causing this type of problem (e.g. ensuring that the host and programmed sequence agree on the transfer size, and restricting transfer sizes to multiples of 32-cycles [2]). However, at the point the driver is loaded, no assumptions can be made regarding the state of the FIFO. Even if previous S/W drivers have behaved correctly, it is impossible to control the number of transactions serviced by the controller operating in FSM-Boot. To address this problem, we ensure the FIFO is cleared during initialisation, before performing any FSM operations. Previously, the fsm_clear_fifo() code was capable of detecting and clearing any unwanted 32-bit words from the FIFO. This patch extends the capability to handle an arbitrary number of bytes present in the FIFO [3]. Now that the issue is better understood, we also remove the calls to fsm_clear_fifo() following the fsm_read() and fsm_write() operations. The process of actually clearing the FIFO deserves a mention. While the FIFO may contain any number of bytes, the SPI_FAST_SEQ_STA register only reports the number of complete 32-bit words present. Furthermore, data can only be drained from the FIFO by reading complete 32-bit words. With this in mind, a two stage process is used to the clear the FIFO: 1. Read any complete 32-bit words from the FIFO, as reported by the SPI_FAST_SEQ_STA register. 2. Mop up any remaining bytes. At this point, it is not known if there are 0, 1, 2, or 3 bytes in the FIFO. To handle all cases, a dummy FSM sequence is used to load one byte at a time, until a complete 32-bit word is formed; at most, 4 bytes will need to be loaded. [1] Although this issue has existed since early versions of the SPI-FSM controller, its full extent only emerged recently as a consequence of the targetpacks starting to use FSM-Boot(x4) as the default configuration. [2] The requirement to restrict transfers to multiples of 32 cycles was found empirically back when DUAL and QUAD mode support was added. The current analysis now gives a satisfactory explanation for this requirement. [3] Theoretically, it is possible for the FIFO to contain an arbitrary number of bits. However, since there are no known use-cases that leave incomplete bytes in the FIFO, only words and bytes are considered here. Signed-off-by: Angus Clark Signed-off-by: Lee Jones --- drivers/mtd/devices/st_spi_fsm.c | 95 +++++++++++++++++++++++++++++++++------- 1 file changed, 79 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index d252514..6e4d3bfe 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -663,6 +663,23 @@ static struct stfsm_seq stfsm_seq_write_status = { SEQ_CFG_STARTSEQ), }; +/* Dummy sequence to read one byte of data from flash into the FIFO */ +static const struct stfsm_seq stfsm_seq_load_fifo_byte = { + .data_size = TRANSFER_SIZE(1), + .seq_opc[0] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(SPINOR_OP_RDID)), + .seq = { + STFSM_INST_CMD1, + STFSM_INST_DATA_READ, + STFSM_INST_STOP, + }, + .seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ), +}; + static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq) { seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | @@ -695,22 +712,6 @@ static inline uint32_t stfsm_fifo_available(struct stfsm *fsm) return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f; } -static void stfsm_clear_fifo(struct stfsm *fsm) -{ - uint32_t avail; - - for (;;) { - avail = stfsm_fifo_available(fsm); - if (!avail) - break; - - while (avail) { - readl(fsm->base + SPI_FAST_SEQ_DATA_REG); - avail--; - } - } -} - static inline void stfsm_load_seq(struct stfsm *fsm, const struct stfsm_seq *seq) { @@ -772,6 +773,68 @@ static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf, uint32_t size) } } +/* + * Clear the data FIFO + * + * Typically, this is only required during driver initialisation, where no + * assumptions can be made regarding the state of the FIFO. + * + * The process of clearing the FIFO is complicated by fact that while it is + * possible for the FIFO to contain an arbitrary number of bytes [1], the + * SPI_FAST_SEQ_STA register only reports the number of complete 32-bit words + * present. Furthermore, data can only be drained from the FIFO by reading + * complete 32-bit words. + * + * With this in mind, a two stage process is used to the clear the FIFO: + * + * 1. Read any complete 32-bit words from the FIFO, as reported by the + * SPI_FAST_SEQ_STA register. + * + * 2. Mop up any remaining bytes. At this point, it is not known if there + * are 0, 1, 2, or 3 bytes in the FIFO. To handle all cases, a dummy FSM + * sequence is used to load one byte at a time, until a complete 32-bit + * word is formed; at most, 4 bytes will need to be loaded. + * + * [1] It is theoretically possible for the FIFO to contain an arbitrary number + * of bits. However, since there are no known use-cases that leave + * incomplete bytes in the FIFO, only words and bytes are considered here. + */ +static void stfsm_clear_fifo(struct stfsm *fsm) +{ + const struct stfsm_seq *seq = &stfsm_seq_load_fifo_byte; + uint32_t words, i; + + /* 1. Clear any 32-bit words */ + words = stfsm_fifo_available(fsm); + if (words) { + for (i = 0; i < words; i++) + readl(fsm->base + SPI_FAST_SEQ_DATA_REG); + dev_dbg(fsm->dev, "cleared %d words from FIFO\n", words); + } + + /* + * 2. Clear any remaining bytes + * - Load the FIFO, one byte at a time, until a complete 32-bit word + * is available. + */ + for (i = 0, words = 0; i < 4 && !words; i++) { + stfsm_load_seq(fsm, seq); + stfsm_wait_seq(fsm); + words = stfsm_fifo_available(fsm); + } + + /* - A single word must be available now */ + if (words != 1) { + dev_err(fsm->dev, "failed to clear bytes from the data FIFO\n"); + return; + } + + /* - Read the 32-bit word */ + readl(fsm->base + SPI_FAST_SEQ_DATA_REG); + + dev_dbg(fsm->dev, "cleared %d byte(s) from the data FIFO\n", 4 - i); +} + static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf, uint32_t size) {