From patchwork Mon Aug 19 18:59:19 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Markus Mayer X-Patchwork-Id: 19328 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-qa0-f70.google.com (mail-qa0-f70.google.com [209.85.216.70]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id D463D246F8 for ; Mon, 19 Aug 2013 18:59:59 +0000 (UTC) Received: by mail-qa0-f70.google.com with SMTP id cd7sf4401555qab.5 for ; Mon, 19 Aug 2013 11:59:59 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-gm-message-state:delivered-to:from:to:cc:subject:date:message-id :in-reply-to:references:mime-version:x-original-sender :x-original-authentication-results:precedence:mailing-list:list-id :list-post:list-help:list-archive:list-unsubscribe:content-type :content-transfer-encoding; bh=4mwIuGxDFcKWqbvxdC5fcfP6lUiUETAfF1CMbUei79o=; b=mL8bRCe0xeNtAZv6A0ZZFNGps/TlvPkCPqprYSm6O+Fhhd/yDRZ4lDwOOlCThoE4nS z3agZrrePYArY+8P260WwPMzOlUlqU8+39/9RhCW5g/MeNBU9tfqHCQ58Na4hSSztNBg F7HE7c+7oi0lWxVtrRu+RBCtg93gnd8ArhVS82IJEtO0LL2nGKWEj5YXsX8x4iry6+6d KZQT7EAe+BV6XiUst2YbGATTACNaKFnapyf/DSIEb2zq4UEhB6GABU1WwU0e/pRWmEVN gJLU0Hlp0l+Ie3NUbzZ9J05rEjnEAtVt/oUByfC/yWxV7QJicdCwP43PJLBRMTvUEYGN yxgw== X-Received: by 10.236.108.233 with SMTP id q69mr950262yhg.11.1376938799683; Mon, 19 Aug 2013 11:59:59 -0700 (PDT) X-BeenThere: patchwork-forward@linaro.org Received: by 10.49.58.244 with SMTP id u20ls1728846qeq.74.gmail; Mon, 19 Aug 2013 11:59:59 -0700 (PDT) X-Received: by 10.52.249.102 with SMTP id yt6mr7600646vdc.21.1376938799501; Mon, 19 Aug 2013 11:59:59 -0700 (PDT) Received: from mail-vc0-f173.google.com (mail-vc0-f173.google.com [209.85.220.173]) by mx.google.com with ESMTPS id gb9si453305vdc.106.1969.12.31.16.00.00 (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Mon, 19 Aug 2013 11:59:59 -0700 (PDT) Received-SPF: neutral (google.com: 209.85.220.173 is neither permitted nor denied by best guess record for domain of patch+caf_=patchwork-forward=linaro.org@linaro.org) client-ip=209.85.220.173; Received: by mail-vc0-f173.google.com with SMTP id id13so3224165vcb.4 for ; Mon, 19 Aug 2013 11:59:59 -0700 (PDT) X-Gm-Message-State: ALoCoQm87tNSs1u62M9YW8eTuBZc7ZbNxMKR1B3fiEVMRqNfmFGLQxjpE7wRADihLEbG44WYDLRb X-Received: by 10.52.164.102 with SMTP id yp6mr12957937vdb.14.1376938799356; Mon, 19 Aug 2013 11:59:59 -0700 (PDT) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patches@linaro.org Received: by 10.220.174.196 with SMTP id u4csp112100vcz; Mon, 19 Aug 2013 11:59:58 -0700 (PDT) X-Received: by 10.68.189.5 with SMTP id ge5mr14891001pbc.42.1376938798106; Mon, 19 Aug 2013 11:59:58 -0700 (PDT) Received: from mms3.broadcom.com (mms3.broadcom.com. [216.31.210.19]) by mx.google.com with ESMTP id hs9si9312849pbc.124.1969.12.31.16.00.00; Mon, 19 Aug 2013 11:59:58 -0700 (PDT) Received-SPF: neutral (google.com: 216.31.210.19 is neither permitted nor denied by best guess record for domain of markus.mayer@linaro.org) client-ip=216.31.210.19; Received: from [10.9.208.57] by mms3.broadcom.com with ESMTP (Broadcom SMTP Relay (Email Firewall v6.5)); Mon, 19 Aug 2013 11:49:39 -0700 X-Server-Uuid: B86B6450-0931-4310-942E-F00ED04CA7AF Received: from IRVEXCHSMTP1.corp.ad.broadcom.com (10.9.207.51) by IRVEXCHCAS08.corp.ad.broadcom.com (10.9.208.57) with Microsoft SMTP Server (TLS) id 14.1.438.0; Mon, 19 Aug 2013 11:59:46 -0700 Received: from mail-irva-13.broadcom.com (10.10.10.20) by IRVEXCHSMTP1.corp.ad.broadcom.com (10.9.207.51) with Microsoft SMTP Server id 14.1.438.0; Mon, 19 Aug 2013 11:59:46 -0700 Received: from mail.broadcom.com (lbrmn-lnxub70.ric.broadcom.com [10.136.8.215]) by mail-irva-13.broadcom.com (Postfix) with ESMTP id B3CDCF2D73; Mon, 19 Aug 2013 11:59:45 -0700 (PDT) From: "Markus Mayer" To: "Sudeep KarkadaNagesha" , "Stephen Warren" , "Linus Walleij" cc: "Christian Daudt" , "Linaro Patches" , "ARM Kernel List" , "Device Tree List" , "Tim Kryger" , "Matt Porter" , "Markus Mayer" , "Markus Mayer" Subject: [PATCH v4 1/3] ARM: bcm281xx: Add GPIO driver Date: Mon, 19 Aug 2013 11:59:19 -0700 Message-ID: <1376938761-13657-2-git-send-email-markus.mayer@linaro.org> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1376938761-13657-1-git-send-email-markus.mayer@linaro.org> References: <1376938761-13657-1-git-send-email-markus.mayer@linaro.org> MIME-Version: 1.0 X-WSS-ID: 7E0CB7492L875803473-02-01 X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: markus.mayer@linaro.org X-Original-Authentication-Results: mx.google.com; spf=neutral (google.com: 209.85.220.173 is neither permitted nor denied by best guess record for domain of patch+caf_=patchwork-forward=linaro.org@linaro.org) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Precedence: list Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org List-ID: X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , From: Markus Mayer This patch adds the GPIO driver for the bcm281xx family of chips. Signed-off-by: Markus Mayer Reviewed-by: Christian Daudt Reviewed-by: Tim Kryger Reviewed-by: Matt Porter Acked-by: Stephen Warren --- .../devicetree/bindings/gpio/gpio-bcm-kona.txt | 43 ++ drivers/gpio/gpio-bcm-kona.c | 658 ++++++++++++++++++++ 2 files changed, 701 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt create mode 100644 drivers/gpio/gpio-bcm-kona.c diff --git a/Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt b/Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt new file mode 100644 index 0000000..70b2faf --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt @@ -0,0 +1,43 @@ +Broadcom Kona Family GPIO +------------------------- + +This GPIO driver is used in the following Broadcom SoCs: + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 + +The GPIO controller only supports edge, not level, triggering of interrupts. + +- compatible: "brcm,kona-gpio" +- reg: Physical base address and length of the controller's registers. +- interrupts: The interrupt outputs from the controller. There is one GPIO + interrupt per GPIO bank. The number of GPIO banks is HW configurable. The + number of interrupts listed depends on the number of GPIO banks on the + SoC. The interrupts must be ordered by bank, starting with bank 0. +- #gpio-cells: Should be <2>. The first cell is the pin number, the second + cell is used to specify optional parameters: + - bit 0 specifies polarity (0 for normal, 1 for inverted) +- #interrupt-cells: Should be <2>. The first cell is the GPIO number. + The second cell is used to specify flags: + - trigger type (bits[1:0]): + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 3 = low-to-high or high-to-low edge triggered + Valid values are 1, 2, 3 +- gpio-controller: Marks the device node as a GPIO controller. +- interrupt-controller: Marks the device node as an interrupt controller. + +Example: + gpio: gpio@35003000 { + compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; + reg = <0x35003000 0x800>; + interrupts = + ; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c new file mode 100644 index 0000000..9715b06 --- /dev/null +++ b/drivers/gpio/gpio-bcm-kona.c @@ -0,0 +1,658 @@ +/* + * Copyright (C) 2012-2013 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#define BCM_GPIO_PASSWD 0x00a5a501 +#define GPIO_PER_BANK 32 + +#define GPIO_BANK(gpio) ((gpio) >> 5) +#define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1)) + +#define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2)) +#define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2)) +#define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2)) +#define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2)) +#define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2)) +#define GPIO_INT_MASK(bank) (0x000000A0 + ((bank) << 2)) +#define GPIO_INT_MSKCLR(bank) (0x000000C0 + ((bank) << 2)) +#define GPIO_CONTROL(bank) (0x00000100 + ((bank) << 2)) +#define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2)) + +#define GPIO_GPPWR_OFFSET 0x00000520 + +#define GPIO_GPCTR0_DBR_SHIFT 5 +#define GPIO_GPCTR0_DBR_MASK 0x000001E0 + +#define GPIO_GPCTR0_ITR_SHIFT 3 +#define GPIO_GPCTR0_ITR_MASK 0x00000018 +#define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001 +#define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002 +#define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003 + +#define GPIO_GPCTR0_IOTR_MASK 0x00000001 +#define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000 +#define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001 + +#define GPIO_GPCTR0_DB_ENABLE_MASK 0x00000100 + +#define LOCK_CODE 0xFFFFFFFF +#define UNLOCK_CODE 0x00000000 + +struct bcm_kona_gpio { + void __iomem *reg_base; + int num_bank; + int irq_base; + spinlock_t lock; + struct gpio_chip gpio_chip; + struct irq_domain *irq_domain; + struct bcm_kona_gpio_bank *banks; + struct platform_device *pdev; +}; + +struct bcm_kona_gpio_bank { + int id; + int irq; + /* Used in the interrupt handler */ + void __iomem *reg_base; +}; + +static inline struct bcm_kona_gpio *to_kona_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct bcm_kona_gpio, gpio_chip); +} + +/* This function counts IRQ entries in the device tree */ +static int bcm_kona_count_irq_resources(struct platform_device *pdev) +{ + int i, ret; + + for (i = 0;; i++) { + ret = platform_get_irq(pdev, i); + if (ret < 0) + break; + } + return i; +} + +static void bcm_kona_gpio_set_lockcode_bank(void __iomem *reg_base, int bank_id, + int lockcode) +{ + writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET); + writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id)); +} + +static inline void bcm_kona_gpio_lock_bank(void __iomem *reg_base, int bank_id) +{ + bcm_kona_gpio_set_lockcode_bank(reg_base, bank_id, LOCK_CODE); +} + +static inline void bcm_kona_gpio_unlock_bank(void __iomem *reg_base, + int bank_id) +{ + bcm_kona_gpio_set_lockcode_bank(reg_base, bank_id, UNLOCK_CODE); +} + +static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, + int value) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val, reg_offset; + unsigned long flags; + + kona_gpio = to_kona_gpio(chip); + reg_base = kona_gpio->reg_base; + spin_lock_irqsave(&kona_gpio->lock, flags); + bcm_kona_gpio_unlock_bank(reg_base, bank_id); + + /* determine the GPIO pin direction */ + val = readl(reg_base + GPIO_CONTROL(gpio)); + val &= GPIO_GPCTR0_IOTR_MASK; + + /* this function only applies to output pin */ + if (GPIO_GPCTR0_IOTR_CMD_INPUT == val) + return; + + reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id); + + val = readl(reg_base + reg_offset); + val |= 1 << bit; + writel(val, reg_base + reg_offset); + + bcm_kona_gpio_lock_bank(reg_base, bank_id); + spin_unlock_irqrestore(&kona_gpio->lock, flags); +} + +static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val, reg_offset; + unsigned long flags; + + kona_gpio = to_kona_gpio(chip); + reg_base = kona_gpio->reg_base; + spin_lock_irqsave(&kona_gpio->lock, flags); + bcm_kona_gpio_unlock_bank(reg_base, bank_id); + + /* determine the GPIO pin direction */ + val = readl(reg_base + GPIO_CONTROL(gpio)); + val &= GPIO_GPCTR0_IOTR_MASK; + + /* read the GPIO bank status */ + reg_offset = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ? + GPIO_IN_STATUS(bank_id) : + GPIO_OUT_STATUS(bank_id); + val = readl(reg_base + reg_offset); + + bcm_kona_gpio_lock_bank(reg_base, bank_id); + spin_unlock_irqrestore(&kona_gpio->lock, flags); + + /* return the specified bit status */ + return (val >> bit) & 1; +} + +static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, + unsigned gpio) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + u32 val; + unsigned long flags; + int bank_id = GPIO_BANK(gpio); + + kona_gpio = to_kona_gpio(chip); + reg_base = kona_gpio->reg_base; + spin_lock_irqsave(&kona_gpio->lock, flags); + bcm_kona_gpio_unlock_bank(reg_base, bank_id); + + val = readl(reg_base + GPIO_CONTROL(gpio)); + val &= ~GPIO_GPCTR0_IOTR_MASK; + val |= GPIO_GPCTR0_IOTR_CMD_INPUT; + writel(val, reg_base + GPIO_CONTROL(gpio)); + + bcm_kona_gpio_lock_bank(reg_base, bank_id); + spin_unlock_irqrestore(&kona_gpio->lock, flags); + + return 0; +} + +static int bcm_kona_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val, reg_offset; + unsigned long flags; + + kona_gpio = to_kona_gpio(chip); + reg_base = kona_gpio->reg_base; + spin_lock_irqsave(&kona_gpio->lock, flags); + bcm_kona_gpio_unlock_bank(reg_base, bank_id); + + val = readl(reg_base + GPIO_CONTROL(gpio)); + val &= ~GPIO_GPCTR0_IOTR_MASK; + val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT; + writel(val, reg_base + GPIO_CONTROL(gpio)); + reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id); + + val = readl(reg_base + reg_offset); + val |= 1 << bit; + writel(val, reg_base + reg_offset); + + bcm_kona_gpio_lock_bank(reg_base, bank_id); + spin_unlock_irqrestore(&kona_gpio->lock, flags); + + return 0; +} + +static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) +{ + struct bcm_kona_gpio *kona_gpio; + + kona_gpio = to_kona_gpio(chip); + if (gpio >= kona_gpio->gpio_chip.ngpio) + return -ENXIO; + return irq_create_mapping(kona_gpio->irq_domain, gpio); +} + +static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio, + unsigned debounce) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + u32 val, res; + unsigned long flags; + int bank_id = GPIO_BANK(gpio); + + kona_gpio = to_kona_gpio(chip); + reg_base = kona_gpio->reg_base; + /* debounce must be 1-128ms (or 0) */ + if ((debounce > 0 && debounce < 1000) || debounce > 128000) { + dev_err(chip->dev, "Debounce value %u not in range\n", + debounce); + return -EINVAL; + } + + /* calculate debounce bit value */ + if (debounce != 0) { + /* Convert to ms */ + debounce /= 1000; + /* find the MSB */ + res = fls(debounce) - 1; + /* Check if MSB-1 is set (round up or down) */ + if (res > 0 && (debounce & 1 << (res - 1))) + res++; + } + + /* spin lock for read-modify-write of the GPIO register */ + spin_lock_irqsave(&kona_gpio->lock, flags); + bcm_kona_gpio_unlock_bank(reg_base, bank_id); + + val = readl(reg_base + GPIO_CONTROL(gpio)); + val &= ~GPIO_GPCTR0_DBR_MASK; + + if (debounce == 0) { + /* disable debounce */ + val &= ~GPIO_GPCTR0_DB_ENABLE_MASK; + } else { + val |= GPIO_GPCTR0_DB_ENABLE_MASK | + (res << GPIO_GPCTR0_DBR_SHIFT); + } + + writel(val, reg_base + GPIO_CONTROL(gpio)); + + bcm_kona_gpio_lock_bank(reg_base, bank_id); + spin_unlock_irqrestore(&kona_gpio->lock, flags); + + return 0; +} + +static struct gpio_chip template_chip = { + .label = "bcm-kona-gpio", + .direction_input = bcm_kona_gpio_direction_input, + .get = bcm_kona_gpio_get, + .direction_output = bcm_kona_gpio_direction_output, + .set = bcm_kona_gpio_set, + .set_debounce = bcm_kona_gpio_set_debounce, + .to_irq = bcm_kona_gpio_to_irq, + .base = 0, +}; + +static void bcm_kona_gpio_irq_ack(struct irq_data *d) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + int gpio = d->hwirq; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val; + unsigned long flags; + + kona_gpio = irq_data_get_irq_chip_data(d); + reg_base = kona_gpio->reg_base; + spin_lock_irqsave(&kona_gpio->lock, flags); + bcm_kona_gpio_unlock_bank(reg_base, bank_id); + + val = readl(reg_base + GPIO_INT_STATUS(bank_id)); + val |= 1 << bit; + writel(val, reg_base + GPIO_INT_STATUS(bank_id)); + + bcm_kona_gpio_lock_bank(reg_base, bank_id); + spin_unlock_irqrestore(&kona_gpio->lock, flags); +} + +static void bcm_kona_gpio_irq_mask(struct irq_data *d) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + int gpio = d->hwirq; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val; + unsigned long flags; + + kona_gpio = irq_data_get_irq_chip_data(d); + reg_base = kona_gpio->reg_base; + spin_lock_irqsave(&kona_gpio->lock, flags); + bcm_kona_gpio_unlock_bank(reg_base, bank_id); + + val = readl(reg_base + GPIO_INT_MASK(bank_id)); + val |= 1 << bit; + writel(val, reg_base + GPIO_INT_MASK(bank_id)); + + bcm_kona_gpio_lock_bank(reg_base, bank_id); + spin_unlock_irqrestore(&kona_gpio->lock, flags); +} + +static void bcm_kona_gpio_irq_unmask(struct irq_data *d) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + int gpio = d->hwirq; + int bank_id = GPIO_BANK(gpio); + int bit = GPIO_BIT(gpio); + u32 val; + unsigned long flags; + + kona_gpio = irq_data_get_irq_chip_data(d); + reg_base = kona_gpio->reg_base; + spin_lock_irqsave(&kona_gpio->lock, flags); + bcm_kona_gpio_unlock_bank(reg_base, bank_id); + + val = readl(reg_base + GPIO_INT_MSKCLR(bank_id)); + val |= 1 << bit; + writel(val, reg_base + GPIO_INT_MSKCLR(bank_id)); + + bcm_kona_gpio_lock_bank(reg_base, bank_id); + spin_unlock_irqrestore(&kona_gpio->lock, flags); +} + +static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct bcm_kona_gpio *kona_gpio; + void __iomem *reg_base; + int gpio = d->hwirq; + u32 lvl_type; + u32 val; + unsigned long flags; + int bank_id = GPIO_BANK(gpio); + + kona_gpio = irq_data_get_irq_chip_data(d); + reg_base = kona_gpio->reg_base; + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_RISING: + lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE; + break; + + case IRQ_TYPE_LEVEL_HIGH: + case IRQ_TYPE_LEVEL_LOW: + /* BCM GPIO doesn't support level triggering */ + default: + dev_err(kona_gpio->gpio_chip.dev, + "Invalid BCM GPIO irq type 0x%x\n", type); + return -EINVAL; + } + + spin_lock_irqsave(&kona_gpio->lock, flags); + bcm_kona_gpio_unlock_bank(reg_base, bank_id); + + val = readl(reg_base + GPIO_CONTROL(gpio)); + val &= ~GPIO_GPCTR0_ITR_MASK; + val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT; + writel(val, reg_base + GPIO_CONTROL(gpio)); + + bcm_kona_gpio_lock_bank(reg_base, bank_id); + spin_unlock_irqrestore(&kona_gpio->lock, flags); + + return 0; +} + +static void bcm_kona_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + void __iomem *reg_base; + int bit, bank_id; + unsigned long sta; + struct bcm_kona_gpio_bank *bank = irq_get_handler_data(irq); + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); + + /* + * For bank interrupts, we can't use chip_data to store the kona_gpio + * pointer, since GIC needs it for its own purposes. Therefore, we get + * our pointer from the bank structure. + */ + reg_base = bank->reg_base; + bank_id = bank->id; + bcm_kona_gpio_unlock_bank(reg_base, bank_id); + + sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) & + (~(readl(reg_base + GPIO_INT_MASK(bank_id)))); + + for_each_set_bit(bit, &sta, 32) { + /* + * Clear interrupt before handler is called so we don't + * miss any interrupt occurred during executing them. + */ + writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) | + (1 << bit), + reg_base + GPIO_INT_STATUS(bank_id)); + /* Invoke interrupt handler */ + generic_handle_irq(gpio_to_irq(GPIO_PER_BANK * bank_id + bit)); + } + + bcm_kona_gpio_lock_bank(reg_base, bank_id); + + chained_irq_exit(chip, desc); +} + +static struct irq_chip bcm_gpio_irq_chip = { + .name = "bcm-kona-gpio", + .irq_ack = bcm_kona_gpio_irq_ack, + .irq_mask = bcm_kona_gpio_irq_mask, + .irq_unmask = bcm_kona_gpio_irq_unmask, + .irq_set_type = bcm_kona_gpio_irq_set_type, +}; + +static struct __initconst of_device_id bcm_kona_gpio_of_match[] = { + { .compatible = "brcm,kona-gpio" }, + {} +}; +MODULE_DEVICE_TABLE(of, bcm_kona_gpio_of_match); + +/* + * This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + +static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hwirq) +{ + int ret; + + ret = irq_set_chip_data(virq, d->host_data); + if (ret < 0) + return ret; + irq_set_lockdep_class(virq, &gpio_lock_class); + irq_set_chip_and_handler(virq, &bcm_gpio_irq_chip, handle_simple_irq); + irq_set_nested_thread(virq, 1); + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int virq) +{ + irq_set_chip_and_handler(virq, NULL, NULL); + irq_set_chip_data(virq, NULL); +} + +static struct irq_domain_ops bcm_kona_irq_ops = { + .map = bcm_kona_gpio_irq_map, + .unmap = bcm_kona_gpio_irq_unmap, + .xlate = irq_domain_xlate_twocell, +}; + +static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio) +{ + void __iomem *reg_base; + int i; + + reg_base = kona_gpio->reg_base; + /* disable interrupts and clear status */ + for (i = 0; i < kona_gpio->num_bank; i++) { + bcm_kona_gpio_unlock_bank(reg_base, i); + writel(0xFFFFFFFF, reg_base + GPIO_INT_MASK(i)); + writel(0xFFFFFFFF, reg_base + GPIO_INT_STATUS(i)); + bcm_kona_gpio_lock_bank(reg_base, i); + } +} + +static int bcm_kona_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct resource *res; + struct bcm_kona_gpio_bank *bank; + struct bcm_kona_gpio *kona_gpio; + struct gpio_chip *chip; + int ret; + int i; + + match = of_match_device(bcm_kona_gpio_of_match, dev); + if (!match) { + dev_err(dev, "Failed to find gpio controller\n"); + return -ENODEV; + } + + kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL); + if (!kona_gpio) { + dev_err(dev, "Failed to allocate memory for GPIO device"); + return -ENOMEM; + } + kona_gpio->gpio_chip = template_chip; + chip = &kona_gpio->gpio_chip; + kona_gpio->num_bank = bcm_kona_count_irq_resources(pdev); + if (kona_gpio->num_bank == 0) { + dev_err(dev, "Couldn't determine # GPIO banks\n"); + return -ENOENT; + } + kona_gpio->banks = devm_kzalloc(dev, + kona_gpio->num_bank * + sizeof(*kona_gpio->banks), + GFP_KERNEL); + if (!kona_gpio->banks) { + dev_err(dev, "Couldn't allocate bank structure\n"); + return -ENOMEM; + } + + kona_gpio->pdev = pdev; + platform_set_drvdata(pdev, kona_gpio); + chip->of_node = dev->of_node; + chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK; + + kona_gpio->irq_base = irq_alloc_descs(-1, 0, chip->ngpio, 0); + if (kona_gpio->irq_base < 0) { + dev_err(dev, "Couldn't allocate IRQ numbers\n"); + return -ENXIO; + } + + kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node, + chip->ngpio, + &bcm_kona_irq_ops, + kona_gpio); + if (!kona_gpio->irq_domain) { + dev_err(dev, "Couldn't allocate IRQ domain\n"); + ret = -ENXIO; + goto err_irq_descs; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "Missing MEM resource\n"); + ret = -ENXIO; + goto err_irq_domain; + } + + kona_gpio->reg_base = devm_request_and_ioremap(dev, res); + if (!kona_gpio->reg_base) { + dev_err(dev, "Couldn't ioremap regs\n"); + ret = -ENXIO; + goto err_irq_domain; + } + + for (i = 0; i < kona_gpio->num_bank; i++) { + bank = &kona_gpio->banks[i]; + bank->id = i; + bank->irq = platform_get_irq(pdev, i); + bank->reg_base = kona_gpio->reg_base; + if (bank->irq < 0) { + dev_err(dev, "Couldn't get IRQ for bank %d", i); + ret = -ENOENT; + goto err_irq_domain; + } + } + + dev_info(&pdev->dev, "Setting up Kona GPIO at 0x%p (phys %#x)\n", + kona_gpio->reg_base, res->start); + + bcm_kona_gpio_reset(kona_gpio); + + ret = gpiochip_add(chip); + if (ret < 0) { + dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret); + goto err_irq_domain; + } + for (i = 0; i < chip->ngpio; i++) { + int irq = bcm_kona_gpio_to_irq(chip, i); + bank = &kona_gpio->banks[GPIO_BANK(i)]; + irq_set_lockdep_class(irq, &gpio_lock_class); + irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, + handle_simple_irq); + set_irq_flags(irq, IRQF_VALID); + } + for (i = 0; i < kona_gpio->num_bank; i++) { + bank = &kona_gpio->banks[i]; + irq_set_chained_handler(bank->irq, bcm_kona_gpio_irq_handler); + irq_set_handler_data(bank->irq, bank); + } + + spin_lock_init(&kona_gpio->lock); + + return 0; + +err_irq_domain: + irq_domain_remove(kona_gpio->irq_domain); + +err_irq_descs: + irq_free_descs(kona_gpio->irq_base, chip->ngpio); + + return ret; +} + +static struct platform_driver bcm_kona_gpio_driver = { + .driver = { + .name = "bcm-kona-gpio", + .owner = THIS_MODULE, + .of_match_table = bcm_kona_gpio_of_match, + }, + .probe = bcm_kona_gpio_probe, +}; + +module_platform_driver(bcm_kona_gpio_driver); + +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Broadcom Kona GPIO Driver"); +MODULE_LICENSE("GPL v2");