From patchwork Wed Feb 10 00:02:57 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ben Widawsky X-Patchwork-Id: 381114 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8FB56C433E0 for ; Wed, 10 Feb 2021 00:31:57 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 46BC164E4F for ; Wed, 10 Feb 2021 00:31:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234915AbhBJAbk (ORCPT ); Tue, 9 Feb 2021 19:31:40 -0500 Received: from mga02.intel.com ([134.134.136.20]:49744 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234709AbhBJAGQ (ORCPT ); Tue, 9 Feb 2021 19:06:16 -0500 IronPort-SDR: TZG/+F7fJNYHkEXVYj5/0YXKM8M70HxJW3NA1c3Rnq89lLodGaSUc4F3uwy341n+pZ8JUdiJgA rtg2c/xAjs8A== X-IronPort-AV: E=McAfee;i="6000,8403,9890"; a="169109190" X-IronPort-AV: E=Sophos;i="5.81,166,1610438400"; d="scan'208";a="169109190" Received: from fmsmga003.fm.intel.com ([10.253.24.29]) by orsmga101.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 09 Feb 2021 16:03:17 -0800 IronPort-SDR: fhshPE+MeNmVPGxUjdXV1SeXW74hPIuK9oLyVunDDH2cgNKJBB4duS4+DnWMFXgvI6klh7cDM2 RP8nzgFf239Q== X-IronPort-AV: E=Sophos;i="5.81,166,1610438400"; d="scan'208";a="419865858" Received: from sitira7x-mobl1.gar.corp.intel.com (HELO bwidawsk-mobl5.local) ([10.252.134.68]) by fmsmga003-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 09 Feb 2021 16:03:16 -0800 From: Ben Widawsky To: linux-cxl@vger.kernel.org Cc: Ben Widawsky , linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org, linux-nvdimm@lists.01.org, linux-pci@vger.kernel.org, Bjorn Helgaas , Chris Browy , Christoph Hellwig , Dan Williams , David Hildenbrand , David Rientjes , Ira Weiny , Jon Masters , Jonathan Cameron , Rafael Wysocki , Randy Dunlap , Vishal Verma , "John Groves (jgroves)" , "Kelley, Sean V" Subject: [PATCH v2 6/8] cxl/mem: Enable commands via CEL Date: Tue, 9 Feb 2021 16:02:57 -0800 Message-Id: <20210210000259.635748-7-ben.widawsky@intel.com> X-Mailer: git-send-email 2.30.0 In-Reply-To: <20210210000259.635748-1-ben.widawsky@intel.com> References: <20210210000259.635748-1-ben.widawsky@intel.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-acpi@vger.kernel.org CXL devices identified by the memory-device class code must implement the Device Command Interface (described in 8.2.9 of the CXL 2.0 spec). While the driver already maintains a list of commands it supports, there is still a need to be able to distinguish between commands that the driver knows about from commands that are optionally supported by the hardware. The Command Effects Log (CEL) is specified in the CXL 2.0 specification. The CEL is one of two types of logs, the other being vendor specific. They are distinguished in hardware/spec via UUID. The CEL is useful for 2 things: 1. Determine which optional commands are supported by the CXL device. 2. Enumerate any vendor specific commands The CEL is used by the driver to determine which commands are available in the hardware and therefore which commands userspace is allowed to execute. The set of enabled commands might be a subset of commands which are advertised in UAPI via CXL_MEM_SEND_COMMAND IOCTL. The implementation leaves the statically defined table of commands and supplements it with a bitmap to determine commands that are enabled. This organization was chosen for the following reasons: - Smaller memory footprint. Doesn't need a table per device. - Reduce memory allocation complexity. - Fixed command IDs to opcode mapping for all devices makes development and debugging easier. - Certain helpers are easily achievable, like cxl_for_each_cmd(). Signed-off-by: Ben Widawsky Reviewed-by: Dan Williams --- drivers/cxl/cxl.h | 2 + drivers/cxl/mem.c | 216 +++++++++++++++++++++++++++++++++++ include/uapi/linux/cxl_mem.h | 1 + 3 files changed, 219 insertions(+) diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h index b3c56fa6e126..9a5e595abfa4 100644 --- a/drivers/cxl/cxl.h +++ b/drivers/cxl/cxl.h @@ -68,6 +68,7 @@ struct cxl_memdev; * (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register) * @mbox_mutex: Mutex to synchronize mailbox access. * @firmware_version: Firmware version for the memory device. + * @enabled_commands: Hardware commands found enabled in CEL. * @pmem: Persistent memory capacity information. * @ram: Volatile memory capacity information. */ @@ -83,6 +84,7 @@ struct cxl_mem { size_t payload_size; struct mutex mbox_mutex; /* Protects device mailbox and firmware */ char firmware_version[0x10]; + unsigned long *enabled_cmds; struct { struct range range; diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c index 6d766a994dce..e9aa6ca18d99 100644 --- a/drivers/cxl/mem.c +++ b/drivers/cxl/mem.c @@ -45,6 +45,8 @@ enum opcode { CXL_MBOX_OP_INVALID = 0x0000, CXL_MBOX_OP_RAW = CXL_MBOX_OP_INVALID, CXL_MBOX_OP_ACTIVATE_FW = 0x0202, + CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400, + CXL_MBOX_OP_GET_LOG = 0x0401, CXL_MBOX_OP_IDENTIFY = 0x4000, CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101, CXL_MBOX_OP_SET_LSA = 0x4103, @@ -103,6 +105,19 @@ static DEFINE_IDA(cxl_memdev_ida); static struct dentry *cxl_debugfs; static bool raw_allow_all; +enum { + CEL_UUID, + VENDOR_DEBUG_UUID +}; + +/* See CXL 2.0 Table 170. Get Log Input Payload */ +static const uuid_t log_uuid[] = { + [CEL_UUID] = UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96, + 0xb1, 0x62, 0x3b, 0x3f, 0x17), + [VENDOR_DEBUG_UUID] = UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f, + 0xd6, 0x07, 0x19, 0x40, 0x3d, 0x86) +}; + /** * struct cxl_mem_command - Driver representation of a memory device command * @info: Command information as it exists for the UAPI @@ -111,6 +126,8 @@ static bool raw_allow_all; * * * %CXL_CMD_FLAG_MANDATORY: Hardware must support this command. This flag is * only used internally by the driver for sanity checking. + * * %CXL_CMD_INTERNAL_FLAG_PSEUDO: This is a pseudo command which doesn't have + * a direct mapping to hardware. They are implicitly always enabled. * * The cxl_mem_command is the driver's internal representation of commands that * are supported by the driver. Some of these commands may not be supported by @@ -146,6 +163,7 @@ static struct cxl_mem_command mem_commands[] = { #ifdef CONFIG_CXL_MEM_RAW_COMMANDS CXL_CMD(RAW, NONE, ~0, ~0), #endif + CXL_CMD(GET_SUPPORTED_LOGS, NONE, 0, ~0), }; /* @@ -627,6 +645,10 @@ static int cxl_validate_cmd_from_user(struct cxl_mem *cxlm, c = &mem_commands[send_cmd->id]; info = &c->info; + /* Check that the command is enabled for hardware */ + if (!test_bit(info->id, cxlm->enabled_cmds)) + return -ENOTTY; + if (info->flags & CXL_MEM_COMMAND_FLAG_KERNEL) return -EPERM; @@ -869,6 +891,14 @@ static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev, u32 reg_lo, mutex_init(&cxlm->mbox_mutex); cxlm->pdev = pdev; cxlm->regs = regs + offset; + cxlm->enabled_cmds = + devm_kmalloc_array(dev, BITS_TO_LONGS(cxl_cmd_count), + sizeof(unsigned long), + GFP_KERNEL | __GFP_ZERO); + if (!cxlm->enabled_cmds) { + dev_err(dev, "No memory available for bitmap\n"); + return NULL; + } dev_dbg(dev, "Mapped CXL Memory Device resource\n"); return cxlm; @@ -1088,6 +1118,188 @@ static int cxl_mem_add_memdev(struct cxl_mem *cxlm) return rc; } +struct cxl_mbox_get_log { + uuid_t uuid; + __le32 offset; + __le32 length; +} __packed; + +static int cxl_xfer_log(struct cxl_mem *cxlm, uuid_t *uuid, u32 size, u8 *out) +{ + u32 remaining = size; + u32 offset = 0; + + while (remaining) { + u32 xfer_size = min_t(u32, remaining, cxlm->payload_size); + struct cxl_mbox_get_log log = { + .uuid = *uuid, + .offset = cpu_to_le32(offset), + .length = cpu_to_le32(xfer_size) + }; + struct mbox_cmd mbox_cmd = { + .opcode = CXL_MBOX_OP_GET_LOG, + .payload_in = &log, + .payload_out = out, + .size_in = sizeof(log), + }; + int rc; + + rc = cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd); + if (rc) + return rc; + + WARN_ON(mbox_cmd.size_out != xfer_size); + + out += xfer_size; + remaining -= xfer_size; + offset += xfer_size; + } + + return 0; +} + +static inline struct cxl_mem_command *cxl_mem_find_command(u16 opcode) +{ + struct cxl_mem_command *c; + + cxl_for_each_cmd(c) + if (c->opcode == opcode) + return c; + + return NULL; +} + +static void cxl_enable_cmd(struct cxl_mem *cxlm, + const struct cxl_mem_command *cmd) +{ + if (test_and_set_bit(cmd->info.id, cxlm->enabled_cmds)) + dev_WARN_ONCE(&cxlm->pdev->dev, true, "cmd enabled twice\n"); +} + +/** + * cxl_walk_cel() - Walk through the Command Effects Log. + * @cxlm: Device. + * @size: Length of the Command Effects Log. + * @cel: CEL + * + * Iterate over each entry in the CEL and determine if the driver supports the + * command. If so, the command is enabled for the device and can be used later. + */ +static void cxl_walk_cel(struct cxl_mem *cxlm, size_t size, u8 *cel) +{ + struct cel_entry { + __le16 opcode; + __le16 effect; + } *cel_entry; + const int cel_entries = size / sizeof(*cel_entry); + int i; + + cel_entry = (struct cel_entry *)cel; + + for (i = 0; i < cel_entries; i++) { + const struct cel_entry *ce = &cel_entry[i]; + const struct cxl_mem_command *cmd = + cxl_mem_find_command(le16_to_cpu(ce->opcode)); + + if (!cmd) { + dev_dbg(&cxlm->pdev->dev, "Unsupported opcode 0x%04x", + le16_to_cpu(ce->opcode)); + continue; + } + + cxl_enable_cmd(cxlm, cmd); + } +} + +/** + * cxl_mem_enumerate_cmds() - Enumerate commands for a device. + * @cxlm: The device. + * + * Returns 0 if enumerate completed successfully. + * + * CXL devices have optional support for certain commands. This function will + * determine the set of supported commands for the hardware and update the + * enabled_cmds bitmap in the @cxlm. + */ +static int cxl_mem_enumerate_cmds(struct cxl_mem *cxlm) +{ + struct device *dev = &cxlm->pdev->dev; + struct cxl_mbox_get_supported_logs { + __le16 entries; + u8 rsvd[6]; + struct gsl_entry { + uuid_t uuid; + __le32 size; + } __packed entry[2]; + } __packed gsl; + struct mbox_cmd mbox_cmd = { + .opcode = CXL_MBOX_OP_GET_SUPPORTED_LOGS, + .payload_out = &gsl, + .size_in = 0, + }; + int i, rc; + + rc = cxl_mem_mbox_get(cxlm); + if (rc) + return rc; + + rc = cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd); + if (rc) + goto out; + + if (mbox_cmd.return_code != CXL_MBOX_SUCCESS) { + rc = -ENXIO; + goto out; + } + + if (mbox_cmd.size_out > sizeof(gsl)) { + dev_warn(dev, "%zu excess logs\n", + (mbox_cmd.size_out - sizeof(gsl)) / + sizeof(struct gsl_entry)); + } + + for (i = 0; i < le16_to_cpu(gsl.entries); i++) { + u32 size = le32_to_cpu(gsl.entry[i].size); + uuid_t uuid = gsl.entry[i].uuid; + u8 *log; + + dev_dbg(dev, "Found LOG type %pU of size %d", &uuid, size); + + if (!uuid_equal(&uuid, &log_uuid[CEL_UUID])) + continue; + + /* + * It's a hardware bug if the log size is less than the input + * payload size because there are many mandatory commands. + */ + if (sizeof(struct cxl_mbox_get_log) > size) { + dev_err(dev, "CEL log size reported was too small (%d)", + size); + rc = -ENOMEM; + goto out; + } + + log = kvmalloc(size, GFP_KERNEL); + if (!log) { + rc = -ENOMEM; + goto out; + } + + rc = cxl_xfer_log(cxlm, &uuid, size, log); + if (rc) { + kvfree(log); + goto out; + } + + cxl_walk_cel(cxlm, size, log); + kvfree(log); + } + +out: + cxl_mem_mbox_put(cxlm); + return rc; +} + /** * cxl_mem_identify() - Send the IDENTIFY command to the device. * @cxlm: The device to identify. @@ -1211,6 +1423,10 @@ static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (rc) return rc; + rc = cxl_mem_enumerate_cmds(cxlm); + if (rc) + return rc; + rc = cxl_mem_identify(cxlm); if (rc) return rc; diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h index 72d1eb601a5d..c5e75b9dad9d 100644 --- a/include/uapi/linux/cxl_mem.h +++ b/include/uapi/linux/cxl_mem.h @@ -23,6 +23,7 @@ ___C(INVALID, "Invalid Command"), \ ___C(IDENTIFY, "Identify Command"), \ ___C(RAW, "Raw device command"), \ + ___C(GET_SUPPORTED_LOGS, "Get Supported Logs"), \ ___C(MAX, "Last command") #define ___C(a, b) CXL_MEM_COMMAND_ID_##a