@@ -109,6 +109,7 @@ ForEachMacros:
- 'css_for_each_child'
- 'css_for_each_descendant_post'
- 'css_for_each_descendant_pre'
+ - 'cxl_for_each_cmd'
- 'device_for_each_child_node'
- 'dma_fence_chain_for_each'
- 'do_for_each_ftrace_op'
@@ -352,6 +352,7 @@ Code Seq# Include File Comments
<mailto:michael.klein@puffin.lb.shuttle.de>
0xCC 00-0F drivers/misc/ibmvmc.h pseries VMC driver
0xCD 01 linux/reiserfs_fs.h
+0xCE 01-02 uapi/linux/cxl_mem.h Compute Express Link Memory Devices
0xCF 02 fs/cifs/ioctl.c
0xDB 00-0F drivers/char/mwave/mwavepub.h
0xDD 00-3F ZFCP device driver see drivers/s390/scsi/
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright(c) 2020 Intel Corporation. All rights reserved. */
+#include <uapi/linux/cxl_mem.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/cdev.h>
@@ -39,6 +40,7 @@
#define CXL_MAILBOX_TIMEOUT_MS (2 * HZ)
enum opcode {
+ CXL_MBOX_OP_INVALID = 0x0000,
CXL_MBOX_OP_IDENTIFY = 0x4000,
CXL_MBOX_OP_MAX = 0x10000
};
@@ -90,9 +92,57 @@ struct cxl_memdev {
static int cxl_mem_major;
static DEFINE_IDA(cxl_memdev_ida);
+/**
+ * struct cxl_mem_command - Driver representation of a memory device command
+ * @info: Command information as it exists for the UAPI
+ * @opcode: The actual bits used for the mailbox protocol
+ * @flags: Set of flags reflecting the state of the command.
+ *
+ * * %CXL_CMD_FLAG_MANDATORY: Hardware must support this command. This flag is
+ * only used internally by the driver for sanity checking.
+ *
+ * The cxl_mem_command is the driver's internal representation of commands that
+ * are supported by the driver. Some of these commands may not be supported by
+ * the hardware. The driver will use @info to validate the fields passed in by
+ * the user then submit the @opcode to the hardware.
+ *
+ * See struct cxl_command_info.
+ */
+struct cxl_mem_command {
+ struct cxl_command_info info;
+ enum opcode opcode;
+};
+
+#define CXL_CMD(_id, _flags, sin, sout) \
+ [CXL_MEM_COMMAND_ID_##_id] = { \
+ .info = { \
+ .id = CXL_MEM_COMMAND_ID_##_id, \
+ .flags = CXL_MEM_COMMAND_FLAG_##_flags, \
+ .size_in = sin, \
+ .size_out = sout, \
+ }, \
+ .opcode = CXL_MBOX_OP_##_id, \
+ }
+
+/*
+ * This table defines the supported mailbox commands for the driver. This table
+ * is made up of a UAPI structure. Non-negative values as parameters in the
+ * table will be validated against the user's input. For example, if size_in is
+ * 0, and the user passed in 1, it is an error.
+ */
+static struct cxl_mem_command mem_commands[] = {
+ CXL_CMD(IDENTIFY, NONE, 0, 0x43),
+};
+
+#define cxl_for_each_cmd(cmd) \
+ for ((cmd) = &mem_commands[0]; \
+ ((cmd) - mem_commands) < ARRAY_SIZE(mem_commands); (cmd)++)
+
+#define cxl_cmd_count ARRAY_SIZE(mem_commands)
+
static int cxl_mem_wait_for_doorbell(struct cxl_mem *cxlm)
{
- const unsigned long start = jiffies;
+ unsigned long start = jiffies;
unsigned long end = start;
while (cxl_doorbell_busy(cxlm)) {
@@ -313,6 +363,243 @@ static void cxl_mem_mbox_put(struct cxl_mem *cxlm)
mutex_unlock(&cxlm->mbox_mutex);
}
+/**
+ * handle_mailbox_cmd_from_user() - Dispatch a mailbox command.
+ * @cxlmd: The CXL memory device to communicate with.
+ * @cmd: The validated command.
+ * @in_payload: Pointer to userspace's input payload.
+ * @out_payload: Pointer to userspace's output payload.
+ * @s: The command submitted by userspace. Has output fields.
+ *
+ * Return:
+ * * %0 - Mailbox transaction succeeded.
+ * * %-EFAULT - Something happened with copy_to/from_user.
+ * * %-ENOMEM - Couldn't allocate a bounce buffer.
+ * * %-EINTR - Mailbox acquisition interrupted.
+ * * %-E2BIG - Output payload would overrun user's buffer.
+ *
+ * Creates the appropriate mailbox command on behalf of a userspace request.
+ * Return value, size, and output payload are all copied out to @u. The
+ * parameters for the command must be validated before calling this function.
+ *
+ * A 0 return code indicates the command executed successfully, not that it was
+ * itself successful. IOW, the cmd->retval should always be checked if wanting
+ * to determine the actual result.
+ */
+static int handle_mailbox_cmd_from_user(struct cxl_memdev *cxlmd,
+ const struct cxl_mem_command *cmd,
+ u64 in_payload, u64 out_payload,
+ struct cxl_send_command __user *s)
+{
+ struct cxl_mem *cxlm = cxlmd->cxlm;
+ struct device *dev = &cxlmd->dev;
+ struct mbox_cmd mbox_cmd = {
+ .opcode = cmd->opcode,
+ .size_in = cmd->info.size_in,
+ };
+ s32 user_size_out;
+ int rc;
+
+ if (get_user(user_size_out, &s->out.size))
+ return -EFAULT;
+
+ if (cmd->info.size_out > 0) /* fixed size command */
+ mbox_cmd.payload_out = kvzalloc(cmd->info.size_out, GFP_KERNEL);
+ else if (cmd->info.size_out < 0) /* variable */
+ mbox_cmd.payload_out = kvzalloc(cxlm->payload_size, GFP_KERNEL);
+
+ if (cmd->info.size_in) {
+ mbox_cmd.payload_in = kvzalloc(cmd->info.size_in, GFP_KERNEL);
+ if (!mbox_cmd.payload_in) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ if (copy_from_user(mbox_cmd.payload_in,
+ u64_to_user_ptr(in_payload),
+ cmd->info.size_in)) {
+ rc = -EFAULT;
+ goto out;
+ }
+ }
+
+ rc = cxl_mem_mbox_get(cxlm);
+ if (rc)
+ goto out;
+
+ dev_dbg(dev,
+ "Submitting %s command for user\n"
+ "\topcode: %x\n"
+ "\tsize: %ub\n",
+ cxl_command_names[cmd->info.id].name, mbox_cmd.opcode,
+ cmd->info.size_in);
+
+ rc = cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd);
+ cxl_mem_mbox_put(cxlm);
+ if (rc)
+ goto out;
+
+ rc = put_user(mbox_cmd.return_code, &s->retval);
+ if (rc)
+ goto out;
+
+ if (user_size_out < mbox_cmd.size_out) {
+ rc = -E2BIG;
+ goto out;
+ }
+
+ if (mbox_cmd.size_out) {
+ if (copy_to_user(u64_to_user_ptr(out_payload),
+ mbox_cmd.payload_out, mbox_cmd.size_out)) {
+ rc = -EFAULT;
+ goto out;
+ }
+ }
+
+ rc = put_user(mbox_cmd.size_out, &s->out.size);
+
+out:
+ kvfree(mbox_cmd.payload_in);
+ kvfree(mbox_cmd.payload_out);
+ return rc;
+}
+
+/**
+ * cxl_validate_cmd_from_user() - Check fields for CXL_MEM_SEND_COMMAND.
+ * @cxlm: &struct cxl_mem device whose mailbox will be used.
+ * @send_cmd: &struct cxl_send_command copied in from userspace.
+ * @out_cmd: Sanitized and populated &struct cxl_mem_command.
+ *
+ * Return:
+ * * %0 - @out_cmd is ready to send.
+ * * %-ENOTTY - Invalid command specified.
+ * * %-EINVAL - Reserved fields or invalid values were used.
+ * * %-EPERM - Attempted to use a protected command.
+ * * %-ENOMEM - Input or output buffer wasn't sized properly.
+ *
+ * The result of this command is a fully validated command in @out_cmd that is
+ * safe to send to the hardware.
+ *
+ * See handle_mailbox_cmd_from_user()
+ */
+static int cxl_validate_cmd_from_user(struct cxl_mem *cxlm,
+ const struct cxl_send_command *send_cmd,
+ struct cxl_mem_command *out_cmd)
+{
+ const struct cxl_command_info *info;
+ struct cxl_mem_command *c;
+
+ if (send_cmd->id == 0 || send_cmd->id >= CXL_MEM_COMMAND_ID_MAX)
+ return -ENOTTY;
+
+ /*
+ * The user can never specify an input payload larger than
+ * hardware supports, but output can be arbitrarily large,
+ * simply write out as much data as the hardware provides.
+ */
+ if (send_cmd->in.size > cxlm->payload_size)
+ return -EINVAL;
+
+ if (send_cmd->flags & ~CXL_MEM_COMMAND_FLAG_MASK)
+ return -EINVAL;
+
+ if (send_cmd->rsvd)
+ return -EINVAL;
+
+ if (send_cmd->in.rsvd || send_cmd->out.rsvd)
+ return -EINVAL;
+
+ /* Convert user's command into the internal representation */
+ c = &mem_commands[send_cmd->id];
+ info = &c->info;
+
+ if (info->flags & CXL_MEM_COMMAND_FLAG_KERNEL)
+ return -EPERM;
+
+ /* Check the input buffer is the expected size */
+ if (info->size_in >= 0 && info->size_in != send_cmd->in.size)
+ return -ENOMEM;
+
+ /* Check the output buffer is at least large enough */
+ if (info->size_out >= 0 && send_cmd->out.size < info->size_out)
+ return -ENOMEM;
+
+ /* Setting a few const fields here... */
+ memcpy(out_cmd, c, sizeof(*c));
+ out_cmd->info.size_in = send_cmd->in.size;
+ out_cmd->info.size_out = send_cmd->out.size;
+
+ return 0;
+}
+
+static int cxl_query_cmd(struct cxl_memdev *cxlmd,
+ struct cxl_mem_query_commands __user *q)
+{
+ struct device *dev = &cxlmd->dev;
+ struct cxl_mem_command *cmd;
+ u32 n_commands;
+ int j = 0;
+
+ dev_dbg(dev, "Query IOCTL\n");
+
+ if (get_user(n_commands, &q->n_commands))
+ return -EFAULT;
+
+ /* returns the total number if 0 elements are requested. */
+ if (n_commands == 0)
+ return put_user(cxl_cmd_count, &q->n_commands);
+
+ /*
+ * otherwise, return max(n_commands, total commands) cxl_command_info
+ * structures.
+ */
+ cxl_for_each_cmd(cmd) {
+ const struct cxl_command_info *info = &cmd->info;
+
+ if (copy_to_user(&q->commands[j++], info, sizeof(*info)))
+ return -EFAULT;
+
+ if (j == n_commands)
+ break;
+ }
+
+ return 0;
+}
+
+static int cxl_send_cmd(struct cxl_memdev *cxlmd,
+ struct cxl_send_command __user *s)
+{
+ struct device *dev = &cxlmd->dev;
+ struct cxl_send_command send;
+ struct cxl_mem_command c;
+ int rc;
+
+ dev_dbg(dev, "Send IOCTL\n");
+
+ if (copy_from_user(&send, s, sizeof(send)))
+ return -EFAULT;
+
+ rc = cxl_validate_cmd_from_user(cxlmd->cxlm, &send, &c);
+ if (rc)
+ return rc;
+
+ return handle_mailbox_cmd_from_user(cxlmd, &c, send.in.payload,
+ send.out.payload, s);
+}
+
+static long __cxl_memdev_ioctl(struct cxl_memdev *cxlmd, unsigned int cmd,
+ unsigned long arg)
+{
+ switch (cmd) {
+ case CXL_MEM_QUERY_COMMANDS:
+ return cxl_query_cmd(cxlmd, (void __user *)arg);
+ case CXL_MEM_SEND_COMMAND:
+ return cxl_send_cmd(cxlmd, (void __user *)arg);
+ default:
+ return -ENOTTY;
+ }
+}
+
static long cxl_memdev_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
@@ -326,7 +613,7 @@ static long cxl_memdev_ioctl(struct file *file, unsigned int cmd,
if (!percpu_ref_tryget_live(&cxlmd->ops_active))
return -ENXIO;
- /* TODO: ioctl body */
+ rc = __cxl_memdev_ioctl(cxlmd, cmd, arg);
percpu_ref_put(&cxlmd->ops_active);
new file mode 100644
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * CXL IOCTLs for Memory Devices
+ */
+
+#ifndef _UAPI_CXL_MEM_H_
+#define _UAPI_CXL_MEM_H_
+
+#include <linux/types.h>
+
+/**
+ * DOC: UAPI
+ *
+ * Not all of all commands that the driver supports are always available for use
+ * by userspace. Userspace must check the results from the QUERY command in
+ * order to determine the live set of commands.
+ */
+
+#define CXL_MEM_QUERY_COMMANDS _IOR(0xCE, 1, struct cxl_mem_query_commands)
+#define CXL_MEM_SEND_COMMAND _IOWR(0xCE, 2, struct cxl_send_command)
+
+#define CXL_CMDS \
+ ___C(INVALID, "Invalid Command"), \
+ ___C(IDENTIFY, "Identify Command"), \
+ ___C(MAX, "Last command")
+
+#define ___C(a, b) CXL_MEM_COMMAND_ID_##a
+enum { CXL_CMDS };
+
+#undef ___C
+#define ___C(a, b) { b }
+static const struct {
+ const char *name;
+} cxl_command_names[] = { CXL_CMDS };
+#undef ___C
+
+/**
+ * struct cxl_command_info - Command information returned from a query.
+ * @id: ID number for the command.
+ * @flags: Flags that specify command behavior.
+ *
+ * * %CXL_MEM_COMMAND_FLAG_KERNEL: This command is reserved for exclusive
+ * kernel use.
+ * * %CXL_MEM_COMMAND_FLAG_MUTEX: This command may require coordination with
+ * the kernel in order to complete successfully.
+ *
+ * @size_in: Expected input size, or -1 if variable length.
+ * @size_out: Expected output size, or -1 if variable length.
+ *
+ * Represents a single command that is supported by both the driver and the
+ * hardware. This is returned as part of an array from the query ioctl. The
+ * following would be a command named "foobar" that takes a variable length
+ * input and returns 0 bytes of output.
+ *
+ * - @id = 10
+ * - @flags = CXL_MEM_COMMAND_FLAG_MUTEX
+ * - @size_in = -1
+ * - @size_out = 0
+ *
+ * See struct cxl_mem_query_commands.
+ */
+struct cxl_command_info {
+ __u32 id;
+
+ __u32 flags;
+#define CXL_MEM_COMMAND_FLAG_NONE 0
+#define CXL_MEM_COMMAND_FLAG_KERNEL BIT(0)
+#define CXL_MEM_COMMAND_FLAG_MASK GENMASK(1, 0)
+
+ __s32 size_in;
+ __s32 size_out;
+};
+
+/**
+ * struct cxl_mem_query_commands - Query supported commands.
+ * @n_commands: In/out parameter. When @n_commands is > 0, the driver will
+ * return min(num_support_commands, n_commands). When @n_commands
+ * is 0, driver will return the number of total supported commands.
+ * @rsvd: Reserved for future use.
+ * @commands: Output array of supported commands. This array must be allocated
+ * by userspace to be at least min(num_support_commands, @n_commands)
+ *
+ * Allow userspace to query the available commands supported by both the driver,
+ * and the hardware. Commands that aren't supported by either the driver, or the
+ * hardware are not returned in the query.
+ *
+ * Examples:
+ *
+ * - { .n_commands = 0 } // Get number of supported commands
+ * - { .n_commands = 15, .commands = buf } // Return first 15 (or less)
+ * supported commands
+ *
+ * See struct cxl_command_info.
+ */
+struct cxl_mem_query_commands {
+ /*
+ * Input: Number of commands to return (space allocated by user)
+ * Output: Number of commands supported by the driver/hardware
+ *
+ * If n_commands is 0, kernel will only return number of commands and
+ * not try to populate commands[], thus allowing userspace to know how
+ * much space to allocate
+ */
+ __u32 n_commands;
+ __u32 rsvd;
+
+ struct cxl_command_info __user commands[]; /* out: supported commands */
+};
+
+/**
+ * struct cxl_send_command - Send a command to a memory device.
+ * @id: The command to send to the memory device. This must be one of the
+ * commands returned by the query command.
+ * @flags: Flags for the command (input).
+ * @rsvd: Must be zero.
+ * @retval: Return value from the memory device (output).
+ * @in.size: Size of the payload to provide to the device (input).
+ * @in.rsvd: Must be zero.
+ * @in.payload: Pointer to memory for payload input (little endian order).
+ * @out.size: Size of the payload received from the device (input/output). This
+ * field is filled in by userspace to let the driver know how much
+ * space was allocated for output. It is populated by the driver to
+ * let userspace know how large the output payload actually was.
+ * @out.rsvd: Must be zero.
+ * @out.payload: Pointer to memory for payload output (little endian order).
+ *
+ * Mechanism for userspace to send a command to the hardware for processing. The
+ * driver will do basic validation on the command sizes. In some cases even the
+ * payload may be introspected. Userspace is required to allocate large
+ * enough buffers for size_out which can be variable length in certain
+ * situations.
+ */
+struct cxl_send_command {
+ __u32 id;
+ __u32 flags;
+ __u32 rsvd;
+ __u32 retval;
+
+ struct {
+ __s32 size;
+ __u32 rsvd;
+ __u64 payload;
+ } in;
+
+ struct {
+ __s32 size;
+ __u32 rsvd;
+ __u64 payload;
+ } out;
+};
+
+#endif