diff mbox series

[V2,1/2] ACPI / scan: Support multiple dma windows with different offsets

Message ID 1659684674-40612-2-git-send-email-lvjianmin@loongson.cn
State New
Headers show
Series DMA: update acpi_dma_get_range to return dma map regions | expand

Commit Message

Jianmin Lv Aug. 5, 2022, 7:31 a.m. UTC
For DT, of_dma_get_range returns bus_dma_region typed dma regions,
which makes multiple dma windows with different offset available
for translation between dma address and cpu address.

But for ACPI, acpi_dma_get_range doesn't return similar dma regions,
causing no path for setting dev->dma_range_map conveniently. So the
patch changes acpi_dma_get_range and returns bus_dma_region typed
dma regions according to of_dma_get_range.

After changing acpi_dma_get_range, acpi_arch_dma_setup is changed for
ARM64, where original dma_addr and size are removed, and pass 0 and
U64_MAX for dma_base and size of arch_setup_dma_ops.

Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/acpi/arm64/dma.c | 44 +++++++++++++++++++++++++++++++++-----------
 drivers/acpi/scan.c      | 48 ++++++++++++++++++++++++------------------------
 include/acpi/acpi_bus.h  |  3 +--
 include/linux/acpi.h     |  7 +++----
 4 files changed, 61 insertions(+), 41 deletions(-)

Comments

Robin Murphy Aug. 5, 2022, 12:46 p.m. UTC | #1
On 2022-08-05 08:31, Jianmin Lv wrote:
> For DT, of_dma_get_range returns bus_dma_region typed dma regions,
> which makes multiple dma windows with different offset available
> for translation between dma address and cpu address.
> 
> But for ACPI, acpi_dma_get_range doesn't return similar dma regions,
> causing no path for setting dev->dma_range_map conveniently. So the
> patch changes acpi_dma_get_range and returns bus_dma_region typed
> dma regions according to of_dma_get_range.
> 
> After changing acpi_dma_get_range, acpi_arch_dma_setup is changed for
> ARM64, where original dma_addr and size are removed, and pass 0 and
> U64_MAX for dma_base and size of arch_setup_dma_ops.

Hmm, I realise the reasoning behind this exists largely in my head, so 
for the benefit of everyone else we should perhaps clarify that these 
arguments are now redundant, so this is a simplification consistent with 
what other ACPI architectures also pass to iommu_setup_dma_ops().

> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
> ---
>   drivers/acpi/arm64/dma.c | 44 +++++++++++++++++++++++++++++++++-----------
>   drivers/acpi/scan.c      | 48 ++++++++++++++++++++++++------------------------
>   include/acpi/acpi_bus.h  |  3 +--
>   include/linux/acpi.h     |  7 +++----
>   4 files changed, 61 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/acpi/arm64/dma.c b/drivers/acpi/arm64/dma.c
> index f16739a..64a41b2 100644
> --- a/drivers/acpi/arm64/dma.c
> +++ b/drivers/acpi/arm64/dma.c
> @@ -4,11 +4,12 @@
>   #include <linux/device.h>
>   #include <linux/dma-direct.h>
>   
> -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
> +void acpi_arch_dma_setup(struct device *dev)
>   {
>   	int ret;
>   	u64 end, mask;
> -	u64 dmaaddr = 0, size = 0, offset = 0;
> +	u64 size = 0;
> +	const struct bus_dma_region *map = NULL;
>   
>   	/*
>   	 * If @dev is expected to be DMA-capable then the bus code that created
> @@ -26,7 +27,33 @@ void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
>   	else
>   		size = 1ULL << 32;
>   
> -	ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
> +	ret = acpi_dma_get_range(dev, &map);
> +	if (!ret) {
> +		const struct bus_dma_region *r = map;
> +		u64 dma_start, dma_end = 0;
> +
> +		/* determine the overall bounds of all dma regions */
> +		for (dma_start = U64_MAX; r->size; r++) {
> +
> +			/* Take lower and upper limits */
> +			if (r->dma_start < dma_start)
> +				dma_start = r->dma_start;

dma_start now only serves as an overcomplicated way to tell if the list 
was empty, so we don't need it...

> +			if (r->dma_start + r->size - 1 > dma_end)
> +				dma_end = r->dma_start + r->size - 1;
> +		}
> +
> +		if (dma_start >= dma_end) {
> +			dev_dbg(dev, "Invalid DMA regions configuration\n");
> +			return;

...but we also don't need this check anway - either there was at least 
one valid resource, so dma_end is now set to something sensible, or 
there were none, in which case the implementation of 
acpi_dma_get_range() here returns success while leaving map == NULL, so 
we've already crashed dereferencing r->size.

> +		}
> +
> +		mask = DMA_BIT_MASK(ilog2(dma_end) + 1);
> +		dev->bus_dma_limit = dma_end;
> +		dev->dma_range_map = map;
> +		dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
> +		*dev->dma_mask = min(*dev->dma_mask, mask);

Don't duplicate all this, just set "size = dma_end + 1" so the existing 
code below picks it up.

> +	}
> +
>   	if (ret == -ENODEV)
>   		ret = iort_dma_get_ranges(dev, &size);
>   	if (!ret) {
> @@ -34,17 +61,12 @@ void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
>   		 * Limit coherent and dma mask based on size retrieved from
>   		 * firmware.
>   		 */
> -		end = dmaaddr + size - 1;
> +		end = size - 1;
>   		mask = DMA_BIT_MASK(ilog2(end) + 1);
>   		dev->bus_dma_limit = end;
>   		dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
>   		*dev->dma_mask = min(*dev->dma_mask, mask);
> -	}
>   
> -	*dma_addr = dmaaddr;
> -	*dma_size = size;
> -
> -	ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size);
> -
> -	dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" : "");
> +		ret = dma_direct_set_offset(dev, 0, 0, size);

Don't call this - we're setting dev->dma_range_map now, so it will only 
scream and fail (or do nothing if there's no offset).

> +	}
>   }
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 762b61f..736517e 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -20,6 +20,7 @@
>   #include <linux/platform_data/x86/apple.h>
>   #include <linux/pgtable.h>
>   #include <linux/crc32.h>
> +#include <linux/dma-direct.h>
>   
>   #include "internal.h"
>   
> @@ -1492,15 +1493,15 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
>    *
>    * Return 0 on success, < 0 on failure.
>    */

Don't forget to update the kerneldoc as well.

> -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> -		       u64 *size)
> +int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
>   {
>   	struct acpi_device *adev;
>   	LIST_HEAD(list);
>   	struct resource_entry *rentry;
>   	int ret;
>   	struct device *dma_dev = dev;
> -	u64 len, dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
> +	int num_ranges = 0;
> +	struct bus_dma_region *r;
>   
>   	/*
>   	 * Walk the device tree chasing an ACPI companion with a _DMA
> @@ -1525,31 +1526,31 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
>   
>   	ret = acpi_dev_get_dma_resources(adev, &list);
>   	if (ret > 0) {
> +		list_for_each_entry(rentry, &list, node)
> +			num_ranges++;

We already have the number of resources in ret.

Looking at this, I also now wonder if we're doing the right thing if the 
object is present but contains no resources. The spec isn't clear 
whether that's even really valid, but if it is, is it meaningful? It 
seems we'd currently consider an empty object equivalent to no object, 
but if anything it should perhaps be interpreted as the opposite, i.e. 
that no DMA is possible because the bus does not decode any ranges. Is 
anyone more familiar with the intent of the spec here?

Thanks,
Robin.

> +
> +		r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL);
> +		if (!r) {
> +			ret = -ENOMEM;
> +			goto out;
> +		}
> +
> +		*map = r;
> +
>   		list_for_each_entry(rentry, &list, node) {
> -			if (dma_offset && rentry->offset != dma_offset) {
> +			if (rentry->res->start >= rentry->res->end) {
>   				ret = -EINVAL;
> -				dev_warn(dma_dev, "Can't handle multiple windows with different offsets\n");
> +				dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
>   				goto out;
>   			}
> -			dma_offset = rentry->offset;
> -
> -			/* Take lower and upper limits */
> -			if (rentry->res->start < dma_start)
> -				dma_start = rentry->res->start;
> -			if (rentry->res->end > dma_end)
> -				dma_end = rentry->res->end;
> -		}
>   
> -		if (dma_start >= dma_end) {
> -			ret = -EINVAL;
> -			dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
> -			goto out;
> +			r->cpu_start = rentry->res->start;
> +			r->dma_start = rentry->res->start - rentry->offset;
> +			r->size = rentry->res->end - rentry->res->start + 1;
> +			r->offset = rentry->offset;
> +			r++;
>   		}
>   
> -		*dma_addr = dma_start - dma_offset;
> -		len = dma_end - dma_start;
> -		*size = max(len, len + 1);
> -		*offset = dma_offset;
>   	}
>    out:
>   	acpi_dev_free_resource_list(&list);
> @@ -1639,20 +1640,19 @@ int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
>   			  const u32 *input_id)
>   {
>   	const struct iommu_ops *iommu;
> -	u64 dma_addr = 0, size = 0;
>   
>   	if (attr == DEV_DMA_NOT_SUPPORTED) {
>   		set_dma_ops(dev, &dma_dummy_ops);
>   		return 0;
>   	}
>   
> -	acpi_arch_dma_setup(dev, &dma_addr, &size);
> +	acpi_arch_dma_setup(dev);
>   
>   	iommu = acpi_iommu_configure_id(dev, input_id);
>   	if (PTR_ERR(iommu) == -EPROBE_DEFER)
>   		return -EPROBE_DEFER;
>   
> -	arch_setup_dma_ops(dev, dma_addr, size,
> +	arch_setup_dma_ops(dev, 0, U64_MAX,
>   				iommu, attr == DEV_DMA_COHERENT);
>   
>   	return 0;
> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> index 0dc1ea0b..e106073 100644
> --- a/include/acpi/acpi_bus.h
> +++ b/include/acpi/acpi_bus.h
> @@ -611,8 +611,7 @@ struct acpi_pci_root {
>   int acpi_iommu_fwspec_init(struct device *dev, u32 id,
>   			   struct fwnode_handle *fwnode,
>   			   const struct iommu_ops *ops);
> -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> -		       u64 *size);
> +int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map);
>   int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
>   			   const u32 *input_id);
>   static inline int acpi_dma_configure(struct device *dev,
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 44975c1..34e0545 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -280,12 +280,12 @@ int acpi_table_parse_madt(enum acpi_madt_type id,
>   
>   #ifdef CONFIG_ARM64
>   void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
> -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size);
> +void acpi_arch_dma_setup(struct device *dev);
>   #else
>   static inline void
>   acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
>   static inline void
> -acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) { }
> +acpi_arch_dma_setup(struct device *dev) { }
>   #endif
>   
>   int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
> @@ -974,8 +974,7 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
>   	return DEV_DMA_NOT_SUPPORTED;
>   }
>   
> -static inline int acpi_dma_get_range(struct device *dev, u64 *dma_addr,
> -				     u64 *offset, u64 *size)
> +static inline int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
>   {
>   	return -ENODEV;
>   }
Jianmin Lv Aug. 6, 2022, 6:13 a.m. UTC | #2
On 2022/8/5 下午8:46, Robin Murphy wrote:
> On 2022-08-05 08:31, Jianmin Lv wrote:
>> For DT, of_dma_get_range returns bus_dma_region typed dma regions,
>> which makes multiple dma windows with different offset available
>> for translation between dma address and cpu address.
>>
>> But for ACPI, acpi_dma_get_range doesn't return similar dma regions,
>> causing no path for setting dev->dma_range_map conveniently. So the
>> patch changes acpi_dma_get_range and returns bus_dma_region typed
>> dma regions according to of_dma_get_range.
>>
>> After changing acpi_dma_get_range, acpi_arch_dma_setup is changed for
>> ARM64, where original dma_addr and size are removed, and pass 0 and
>> U64_MAX for dma_base and size of arch_setup_dma_ops.
> 
> Hmm, I realise the reasoning behind this exists largely in my head, so 
> for the benefit of everyone else we should perhaps clarify that these 
> arguments are now redundant, so this is a simplification consistent with 
> what other ACPI architectures also pass to iommu_setup_dma_ops().
> 

Ok, I'll add reason of changing it into commit log for everyone else.


>> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
>> ---
>>   drivers/acpi/arm64/dma.c | 44 
>> +++++++++++++++++++++++++++++++++-----------
>>   drivers/acpi/scan.c      | 48 
>> ++++++++++++++++++++++++------------------------
>>   include/acpi/acpi_bus.h  |  3 +--
>>   include/linux/acpi.h     |  7 +++----
>>   4 files changed, 61 insertions(+), 41 deletions(-)
>>
>> diff --git a/drivers/acpi/arm64/dma.c b/drivers/acpi/arm64/dma.c
>> index f16739a..64a41b2 100644
>> --- a/drivers/acpi/arm64/dma.c
>> +++ b/drivers/acpi/arm64/dma.c
>> @@ -4,11 +4,12 @@
>>   #include <linux/device.h>
>>   #include <linux/dma-direct.h>
>> -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 
>> *dma_size)
>> +void acpi_arch_dma_setup(struct device *dev)
>>   {
>>       int ret;
>>       u64 end, mask;
>> -    u64 dmaaddr = 0, size = 0, offset = 0;
>> +    u64 size = 0;
>> +    const struct bus_dma_region *map = NULL;
>>       /*
>>        * If @dev is expected to be DMA-capable then the bus code that 
>> created
>> @@ -26,7 +27,33 @@ void acpi_arch_dma_setup(struct device *dev, u64 
>> *dma_addr, u64 *dma_size)
>>       else
>>           size = 1ULL << 32;
>> -    ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
>> +    ret = acpi_dma_get_range(dev, &map);
>> +    if (!ret) {
>> +        const struct bus_dma_region *r = map;
>> +        u64 dma_start, dma_end = 0;
>> +
>> +        /* determine the overall bounds of all dma regions */
>> +        for (dma_start = U64_MAX; r->size; r++) {
>> +
>> +            /* Take lower and upper limits */
>> +            if (r->dma_start < dma_start)
>> +                dma_start = r->dma_start;
> 
> dma_start now only serves as an overcomplicated way to tell if the list 
> was empty, so we don't need it...

Ok,thanks.

> 
>> +            if (r->dma_start + r->size - 1 > dma_end)
>> +                dma_end = r->dma_start + r->size - 1;
>> +        }
>> +
>> +        if (dma_start >= dma_end) {
>> +            dev_dbg(dev, "Invalid DMA regions configuration\n");
>> +            return;
> 
> ...but we also don't need this check anway - either there was at least 
> one valid resource, so dma_end is now set to something sensible, or 
> there were none, in which case the implementation of 
> acpi_dma_get_range() here returns success while leaving map == NULL, so 
> we've already crashed dereferencing r->size.
> 

Ok, thanks.


>> +        }
>> +
>> +        mask = DMA_BIT_MASK(ilog2(dma_end) + 1);
>> +        dev->bus_dma_limit = dma_end;
>> +        dev->dma_range_map = map;
>> +        dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
>> +        *dev->dma_mask = min(*dev->dma_mask, mask);
> 
> Don't duplicate all this, just set "size = dma_end + 1" so the existing 
> code below picks it up.
> 

TBH, I'm not familiar with ARM64's DMA stuff, but from the code here, I 
think there are two ways to get dma ranges: acpi_dma_get_range or 
iort_dma_get_ranges.

Before the patch, after obtaining the dmaaddr, offset and size in any 
way of the both, the bus_dma_limit, mask and dma_range_map will be 
initialized, and dma_range_map is created a *new* one for *both* ways.

But after changing acpi_dma_get_range, when we are ok to obtain 
dma_range_map by acpi_dma_get_range, we'll use it instead of creating a
new one like before. For iort_dma_get_ranges, we have to still create a 
new dma_range_map. So, I have to handle separately each way here.

It seems that it's enough to handle dma_range_map separately, and others 
can be still initialized in one place.

>> +    }
>> +
>>       if (ret == -ENODEV)
>>           ret = iort_dma_get_ranges(dev, &size);
>>       if (!ret) {
>> @@ -34,17 +61,12 @@ void acpi_arch_dma_setup(struct device *dev, u64 
>> *dma_addr, u64 *dma_size)
>>            * Limit coherent and dma mask based on size retrieved from
>>            * firmware.
>>            */
>> -        end = dmaaddr + size - 1;
>> +        end = size - 1;
>>           mask = DMA_BIT_MASK(ilog2(end) + 1);
>>           dev->bus_dma_limit = end;
>>           dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
>>           *dev->dma_mask = min(*dev->dma_mask, mask);
>> -    }
>> -    *dma_addr = dmaaddr;
>> -    *dma_size = size;
>> -
>> -    ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size);
>> -
>> -    dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" 
>> : "");
>> +        ret = dma_direct_set_offset(dev, 0, 0, size);
> 
> Don't call this - we're setting dev->dma_range_map now, so it will only 
> scream and fail (or do nothing if there's no offset).
> 

Same as above.

>> +    }
>>   }
>> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
>> index 762b61f..736517e 100644
>> --- a/drivers/acpi/scan.c
>> +++ b/drivers/acpi/scan.c
>> @@ -20,6 +20,7 @@
>>   #include <linux/platform_data/x86/apple.h>
>>   #include <linux/pgtable.h>
>>   #include <linux/crc32.h>
>> +#include <linux/dma-direct.h>
>>   #include "internal.h"
>> @@ -1492,15 +1493,15 @@ enum dev_dma_attr acpi_get_dma_attr(struct 
>> acpi_device *adev)
>>    *
>>    * Return 0 on success, < 0 on failure.
>>    */
> 
> Don't forget to update the kerneldoc as well.
> 

Ok, thanks.


>> -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
>> -               u64 *size)
>> +int acpi_dma_get_range(struct device *dev, const struct 
>> bus_dma_region **map)
>>   {
>>       struct acpi_device *adev;
>>       LIST_HEAD(list);
>>       struct resource_entry *rentry;
>>       int ret;
>>       struct device *dma_dev = dev;
>> -    u64 len, dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
>> +    int num_ranges = 0;
>> +    struct bus_dma_region *r;
>>       /*
>>        * Walk the device tree chasing an ACPI companion with a _DMA
>> @@ -1525,31 +1526,31 @@ int acpi_dma_get_range(struct device *dev, u64 
>> *dma_addr, u64 *offset,
>>       ret = acpi_dev_get_dma_resources(adev, &list);
>>       if (ret > 0) {
>> +        list_for_each_entry(rentry, &list, node)
>> +            num_ranges++;
> 
> We already have the number of resources in ret.
> 

Ok, thanks.


> Looking at this, I also now wonder if we're doing the right thing if the 
> object is present but contains no resources. The spec isn't clear 
> whether that's even really valid, but if it is, is it meaningful? It 
> seems we'd currently consider an empty object equivalent to no object, 
> but if anything it should perhaps be interpreted as the opposite, i.e. 
> that no DMA is possible because the bus does not decode any ranges. Is 
> anyone more familiar with the intent of the spec here?
> 
> Thanks,
> Robin.
> 

According to _DMA of ACPI spec, _DMA is optional, if without it(no _DMA 
object configured in DSDT), kernel assumes that any address range placed 
on bus by a child device is valid and can be decoded. So I think it is 
still legal if _DMA is present and no resources contained in it. I mean 
an empty _DMA object equals no _DMA object. But obviously it's not 
meaningful for an empty _DMA object, anybody should not pass an empty 
_DMA object.

>> +
>> +        r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL);
>> +        if (!r) {
>> +            ret = -ENOMEM;
>> +            goto out;
>> +        }
>> +
>> +        *map = r;
>> +
>>           list_for_each_entry(rentry, &list, node) {
>> -            if (dma_offset && rentry->offset != dma_offset) {
>> +            if (rentry->res->start >= rentry->res->end) {
>>                   ret = -EINVAL;
>> -                dev_warn(dma_dev, "Can't handle multiple windows with 
>> different offsets\n");
>> +                dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
>>                   goto out;
>>               }
>> -            dma_offset = rentry->offset;
>> -
>> -            /* Take lower and upper limits */
>> -            if (rentry->res->start < dma_start)
>> -                dma_start = rentry->res->start;
>> -            if (rentry->res->end > dma_end)
>> -                dma_end = rentry->res->end;
>> -        }
>> -        if (dma_start >= dma_end) {
>> -            ret = -EINVAL;
>> -            dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
>> -            goto out;
>> +            r->cpu_start = rentry->res->start;
>> +            r->dma_start = rentry->res->start - rentry->offset;
>> +            r->size = rentry->res->end - rentry->res->start + 1;
>> +            r->offset = rentry->offset;
>> +            r++;
>>           }
>> -        *dma_addr = dma_start - dma_offset;
>> -        len = dma_end - dma_start;
>> -        *size = max(len, len + 1);
>> -        *offset = dma_offset;
>>       }
>>    out:
>>       acpi_dev_free_resource_list(&list);
>> @@ -1639,20 +1640,19 @@ int acpi_dma_configure_id(struct device *dev, 
>> enum dev_dma_attr attr,
>>                 const u32 *input_id)
>>   {
>>       const struct iommu_ops *iommu;
>> -    u64 dma_addr = 0, size = 0;
>>       if (attr == DEV_DMA_NOT_SUPPORTED) {
>>           set_dma_ops(dev, &dma_dummy_ops);
>>           return 0;
>>       }
>> -    acpi_arch_dma_setup(dev, &dma_addr, &size);
>> +    acpi_arch_dma_setup(dev);
>>       iommu = acpi_iommu_configure_id(dev, input_id);
>>       if (PTR_ERR(iommu) == -EPROBE_DEFER)
>>           return -EPROBE_DEFER;
>> -    arch_setup_dma_ops(dev, dma_addr, size,
>> +    arch_setup_dma_ops(dev, 0, U64_MAX,
>>                   iommu, attr == DEV_DMA_COHERENT);
>>       return 0;
>> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
>> index 0dc1ea0b..e106073 100644
>> --- a/include/acpi/acpi_bus.h
>> +++ b/include/acpi/acpi_bus.h
>> @@ -611,8 +611,7 @@ struct acpi_pci_root {
>>   int acpi_iommu_fwspec_init(struct device *dev, u32 id,
>>                  struct fwnode_handle *fwnode,
>>                  const struct iommu_ops *ops);
>> -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
>> -               u64 *size);
>> +int acpi_dma_get_range(struct device *dev, const struct 
>> bus_dma_region **map);
>>   int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
>>                  const u32 *input_id);
>>   static inline int acpi_dma_configure(struct device *dev,
>> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
>> index 44975c1..34e0545 100644
>> --- a/include/linux/acpi.h
>> +++ b/include/linux/acpi.h
>> @@ -280,12 +280,12 @@ int acpi_table_parse_madt(enum acpi_madt_type id,
>>   #ifdef CONFIG_ARM64
>>   void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
>> -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 
>> *dma_size);
>> +void acpi_arch_dma_setup(struct device *dev);
>>   #else
>>   static inline void
>>   acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
>>   static inline void
>> -acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) 
>> { }
>> +acpi_arch_dma_setup(struct device *dev) { }
>>   #endif
>>   int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
>> @@ -974,8 +974,7 @@ static inline enum dev_dma_attr 
>> acpi_get_dma_attr(struct acpi_device *adev)
>>       return DEV_DMA_NOT_SUPPORTED;
>>   }
>> -static inline int acpi_dma_get_range(struct device *dev, u64 *dma_addr,
>> -                     u64 *offset, u64 *size)
>> +static inline int acpi_dma_get_range(struct device *dev, const struct 
>> bus_dma_region **map)
>>   {
>>       return -ENODEV;
>>   }
Jianmin Lv Aug. 6, 2022, 7:21 a.m. UTC | #3
On 2022/8/6 下午2:13, Jianmin Lv wrote:
> 
> 
> On 2022/8/5 下午8:46, Robin Murphy wrote:
>> On 2022-08-05 08:31, Jianmin Lv wrote:
>>> For DT, of_dma_get_range returns bus_dma_region typed dma regions,
>>> which makes multiple dma windows with different offset available
>>> for translation between dma address and cpu address.
>>>
>>> But for ACPI, acpi_dma_get_range doesn't return similar dma regions,
>>> causing no path for setting dev->dma_range_map conveniently. So the
>>> patch changes acpi_dma_get_range and returns bus_dma_region typed
>>> dma regions according to of_dma_get_range.
>>>
>>> After changing acpi_dma_get_range, acpi_arch_dma_setup is changed for
>>> ARM64, where original dma_addr and size are removed, and pass 0 and
>>> U64_MAX for dma_base and size of arch_setup_dma_ops.
>>
>> Hmm, I realise the reasoning behind this exists largely in my head, so 
>> for the benefit of everyone else we should perhaps clarify that these 
>> arguments are now redundant, so this is a simplification consistent 
>> with what other ACPI architectures also pass to iommu_setup_dma_ops().
>>
> 
> Ok, I'll add reason of changing it into commit log for everyone else.
> 
> 
>>> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
>>> ---
>>>   drivers/acpi/arm64/dma.c | 44 
>>> +++++++++++++++++++++++++++++++++-----------
>>>   drivers/acpi/scan.c      | 48 
>>> ++++++++++++++++++++++++------------------------
>>>   include/acpi/acpi_bus.h  |  3 +--
>>>   include/linux/acpi.h     |  7 +++----
>>>   4 files changed, 61 insertions(+), 41 deletions(-)
>>>
>>> diff --git a/drivers/acpi/arm64/dma.c b/drivers/acpi/arm64/dma.c
>>> index f16739a..64a41b2 100644
>>> --- a/drivers/acpi/arm64/dma.c
>>> +++ b/drivers/acpi/arm64/dma.c
>>> @@ -4,11 +4,12 @@
>>>   #include <linux/device.h>
>>>   #include <linux/dma-direct.h>
>>> -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 
>>> *dma_size)
>>> +void acpi_arch_dma_setup(struct device *dev)
>>>   {
>>>       int ret;
>>>       u64 end, mask;
>>> -    u64 dmaaddr = 0, size = 0, offset = 0;
>>> +    u64 size = 0;
>>> +    const struct bus_dma_region *map = NULL;
>>>       /*
>>>        * If @dev is expected to be DMA-capable then the bus code that 
>>> created
>>> @@ -26,7 +27,33 @@ void acpi_arch_dma_setup(struct device *dev, u64 
>>> *dma_addr, u64 *dma_size)
>>>       else
>>>           size = 1ULL << 32;
>>> -    ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
>>> +    ret = acpi_dma_get_range(dev, &map);
>>> +    if (!ret) {
>>> +        const struct bus_dma_region *r = map;
>>> +        u64 dma_start, dma_end = 0;
>>> +
>>> +        /* determine the overall bounds of all dma regions */
>>> +        for (dma_start = U64_MAX; r->size; r++) {
>>> +
>>> +            /* Take lower and upper limits */
>>> +            if (r->dma_start < dma_start)
>>> +                dma_start = r->dma_start;
>>
>> dma_start now only serves as an overcomplicated way to tell if the 
>> list was empty, so we don't need it...
> 
> Ok,thanks.
> 
>>
>>> +            if (r->dma_start + r->size - 1 > dma_end)
>>> +                dma_end = r->dma_start + r->size - 1;
>>> +        }
>>> +
>>> +        if (dma_start >= dma_end) {
>>> +            dev_dbg(dev, "Invalid DMA regions configuration\n");
>>> +            return;
>>
>> ...but we also don't need this check anway - either there was at least 
>> one valid resource, so dma_end is now set to something sensible, or 
>> there were none, in which case the implementation of 
>> acpi_dma_get_range() here returns success while leaving map == NULL, 
>> so we've already crashed dereferencing r->size.
>>
> 
> Ok, thanks.
> 
> 
>>> +        }
>>> +
>>> +        mask = DMA_BIT_MASK(ilog2(dma_end) + 1);
>>> +        dev->bus_dma_limit = dma_end;
>>> +        dev->dma_range_map = map;
>>> +        dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
>>> +        *dev->dma_mask = min(*dev->dma_mask, mask);
>>
>> Don't duplicate all this, just set "size = dma_end + 1" so the 
>> existing code below picks it up.
>>
> 
> TBH, I'm not familiar with ARM64's DMA stuff, but from the code here, I 
> think there are two ways to get dma ranges: acpi_dma_get_range or 
> iort_dma_get_ranges.
> 
> Before the patch, after obtaining the dmaaddr, offset and size in any 
> way of the both, the bus_dma_limit, mask and dma_range_map will be 
> initialized, and dma_range_map is created a *new* one for *both* ways.
> 
> But after changing acpi_dma_get_range, when we are ok to obtain 
> dma_range_map by acpi_dma_get_range, we'll use it instead of creating a
> new one like before. For iort_dma_get_ranges, we have to still create a 
> new dma_range_map. So, I have to handle separately each way here.
> 
> It seems that it's enough to handle dma_range_map separately, and others 
> can be still initialized in one place.
> 

Maybe I got what you mean, I looked into dma_direct_set_offset, which is 
only meaningful when acpi_dma_get_range return 0 with correct offset and 
dmaaddr. iort_dma_get_ranges is only used to retrieve size. Right? If 
so, code here should be:

dev->dma_range_map = map;
size = dma_end + 1;

>>> +    }
>>> +
>>>       if (ret == -ENODEV)
>>>           ret = iort_dma_get_ranges(dev, &size);
>>>       if (!ret) {
>>> @@ -34,17 +61,12 @@ void acpi_arch_dma_setup(struct device *dev, u64 
>>> *dma_addr, u64 *dma_size)
>>>            * Limit coherent and dma mask based on size retrieved from
>>>            * firmware.
>>>            */
>>> -        end = dmaaddr + size - 1;
>>> +        end = size - 1;
>>>           mask = DMA_BIT_MASK(ilog2(end) + 1);
>>>           dev->bus_dma_limit = end;
>>>           dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
>>>           *dev->dma_mask = min(*dev->dma_mask, mask);
>>> -    }
>>> -    *dma_addr = dmaaddr;
>>> -    *dma_size = size;
>>> -
>>> -    ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size);
>>> -
>>> -    dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" 
>>> : "");
>>> +        ret = dma_direct_set_offset(dev, 0, 0, size);
>>
>> Don't call this - we're setting dev->dma_range_map now, so it will 
>> only scream and fail (or do nothing if there's no offset).
>>
> 
> Same as above.
> 

Same, If what I understand is right above, dma_direct_set_offset is 
should be removed as you suggested.

>>> +    }
>>>   }
>>> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
>>> index 762b61f..736517e 100644
>>> --- a/drivers/acpi/scan.c
>>> +++ b/drivers/acpi/scan.c
>>> @@ -20,6 +20,7 @@
>>>   #include <linux/platform_data/x86/apple.h>
>>>   #include <linux/pgtable.h>
>>>   #include <linux/crc32.h>
>>> +#include <linux/dma-direct.h>
>>>   #include "internal.h"
>>> @@ -1492,15 +1493,15 @@ enum dev_dma_attr acpi_get_dma_attr(struct 
>>> acpi_device *adev)
>>>    *
>>>    * Return 0 on success, < 0 on failure.
>>>    */
>>
>> Don't forget to update the kerneldoc as well.
>>
> 
> Ok, thanks.
> 
> 
>>> -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
>>> -               u64 *size)
>>> +int acpi_dma_get_range(struct device *dev, const struct 
>>> bus_dma_region **map)
>>>   {
>>>       struct acpi_device *adev;
>>>       LIST_HEAD(list);
>>>       struct resource_entry *rentry;
>>>       int ret;
>>>       struct device *dma_dev = dev;
>>> -    u64 len, dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
>>> +    int num_ranges = 0;
>>> +    struct bus_dma_region *r;
>>>       /*
>>>        * Walk the device tree chasing an ACPI companion with a _DMA
>>> @@ -1525,31 +1526,31 @@ int acpi_dma_get_range(struct device *dev, 
>>> u64 *dma_addr, u64 *offset,
>>>       ret = acpi_dev_get_dma_resources(adev, &list);
>>>       if (ret > 0) {
>>> +        list_for_each_entry(rentry, &list, node)
>>> +            num_ranges++;
>>
>> We already have the number of resources in ret.
>>
> 
> Ok, thanks.
> 
> 
>> Looking at this, I also now wonder if we're doing the right thing if 
>> the object is present but contains no resources. The spec isn't clear 
>> whether that's even really valid, but if it is, is it meaningful? It 
>> seems we'd currently consider an empty object equivalent to no object, 
>> but if anything it should perhaps be interpreted as the opposite, i.e. 
>> that no DMA is possible because the bus does not decode any ranges. Is 
>> anyone more familiar with the intent of the spec here?
>>
>> Thanks,
>> Robin.
>>
> 
> According to _DMA of ACPI spec, _DMA is optional, if without it(no _DMA 
> object configured in DSDT), kernel assumes that any address range placed 
> on bus by a child device is valid and can be decoded. So I think it is 
> still legal if _DMA is present and no resources contained in it. I mean 
> an empty _DMA object equals no _DMA object. But obviously it's not 
> meaningful for an empty _DMA object, anybody should not pass an empty 
> _DMA object.
> 
>>> +
>>> +        r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL);
>>> +        if (!r) {
>>> +            ret = -ENOMEM;
>>> +            goto out;
>>> +        }
>>> +
>>> +        *map = r;
>>> +
>>>           list_for_each_entry(rentry, &list, node) {
>>> -            if (dma_offset && rentry->offset != dma_offset) {
>>> +            if (rentry->res->start >= rentry->res->end) {
>>>                   ret = -EINVAL;
>>> -                dev_warn(dma_dev, "Can't handle multiple windows 
>>> with different offsets\n");
>>> +                dev_dbg(dma_dev, "Invalid DMA regions 
>>> configuration\n");
>>>                   goto out;
>>>               }
>>> -            dma_offset = rentry->offset;
>>> -
>>> -            /* Take lower and upper limits */
>>> -            if (rentry->res->start < dma_start)
>>> -                dma_start = rentry->res->start;
>>> -            if (rentry->res->end > dma_end)
>>> -                dma_end = rentry->res->end;
>>> -        }
>>> -        if (dma_start >= dma_end) {
>>> -            ret = -EINVAL;
>>> -            dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
>>> -            goto out;
>>> +            r->cpu_start = rentry->res->start;
>>> +            r->dma_start = rentry->res->start - rentry->offset;
>>> +            r->size = rentry->res->end - rentry->res->start + 1;
>>> +            r->offset = rentry->offset;
>>> +            r++;
>>>           }
>>> -        *dma_addr = dma_start - dma_offset;
>>> -        len = dma_end - dma_start;
>>> -        *size = max(len, len + 1);
>>> -        *offset = dma_offset;
>>>       }
>>>    out:
>>>       acpi_dev_free_resource_list(&list);
>>> @@ -1639,20 +1640,19 @@ int acpi_dma_configure_id(struct device *dev, 
>>> enum dev_dma_attr attr,
>>>                 const u32 *input_id)
>>>   {
>>>       const struct iommu_ops *iommu;
>>> -    u64 dma_addr = 0, size = 0;
>>>       if (attr == DEV_DMA_NOT_SUPPORTED) {
>>>           set_dma_ops(dev, &dma_dummy_ops);
>>>           return 0;
>>>       }
>>> -    acpi_arch_dma_setup(dev, &dma_addr, &size);
>>> +    acpi_arch_dma_setup(dev);
>>>       iommu = acpi_iommu_configure_id(dev, input_id);
>>>       if (PTR_ERR(iommu) == -EPROBE_DEFER)
>>>           return -EPROBE_DEFER;
>>> -    arch_setup_dma_ops(dev, dma_addr, size,
>>> +    arch_setup_dma_ops(dev, 0, U64_MAX,
>>>                   iommu, attr == DEV_DMA_COHERENT);
>>>       return 0;
>>> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
>>> index 0dc1ea0b..e106073 100644
>>> --- a/include/acpi/acpi_bus.h
>>> +++ b/include/acpi/acpi_bus.h
>>> @@ -611,8 +611,7 @@ struct acpi_pci_root {
>>>   int acpi_iommu_fwspec_init(struct device *dev, u32 id,
>>>                  struct fwnode_handle *fwnode,
>>>                  const struct iommu_ops *ops);
>>> -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
>>> -               u64 *size);
>>> +int acpi_dma_get_range(struct device *dev, const struct 
>>> bus_dma_region **map);
>>>   int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
>>>                  const u32 *input_id);
>>>   static inline int acpi_dma_configure(struct device *dev,
>>> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
>>> index 44975c1..34e0545 100644
>>> --- a/include/linux/acpi.h
>>> +++ b/include/linux/acpi.h
>>> @@ -280,12 +280,12 @@ int acpi_table_parse_madt(enum acpi_madt_type id,
>>>   #ifdef CONFIG_ARM64
>>>   void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
>>> -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 
>>> *dma_size);
>>> +void acpi_arch_dma_setup(struct device *dev);
>>>   #else
>>>   static inline void
>>>   acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
>>>   static inline void
>>> -acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 
>>> *dma_size) { }
>>> +acpi_arch_dma_setup(struct device *dev) { }
>>>   #endif
>>>   int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity 
>>> *ma);
>>> @@ -974,8 +974,7 @@ static inline enum dev_dma_attr 
>>> acpi_get_dma_attr(struct acpi_device *adev)
>>>       return DEV_DMA_NOT_SUPPORTED;
>>>   }
>>> -static inline int acpi_dma_get_range(struct device *dev, u64 *dma_addr,
>>> -                     u64 *offset, u64 *size)
>>> +static inline int acpi_dma_get_range(struct device *dev, const 
>>> struct bus_dma_region **map)
>>>   {
>>>       return -ENODEV;
>>>   }
Lorenzo Pieralisi Aug. 8, 2022, 8:24 a.m. UTC | #4
On Fri, Aug 05, 2022 at 01:46:07PM +0100, Robin Murphy wrote:

[...]

> > -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> > -		       u64 *size)
> > +int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
> >   {
> >   	struct acpi_device *adev;
> >   	LIST_HEAD(list);
> >   	struct resource_entry *rentry;
> >   	int ret;
> >   	struct device *dma_dev = dev;
> > -	u64 len, dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
> > +	int num_ranges = 0;
> > +	struct bus_dma_region *r;
> >   	/*
> >   	 * Walk the device tree chasing an ACPI companion with a _DMA
> > @@ -1525,31 +1526,31 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> >   	ret = acpi_dev_get_dma_resources(adev, &list);
> >   	if (ret > 0) {
> > +		list_for_each_entry(rentry, &list, node)
> > +			num_ranges++;
> 
> We already have the number of resources in ret.
> 
> Looking at this, I also now wonder if we're doing the right thing if the
> object is present but contains no resources. The spec isn't clear whether
> that's even really valid, but if it is, is it meaningful? It seems we'd
> currently consider an empty object equivalent to no object, but if anything
> it should perhaps be interpreted as the opposite, i.e. that no DMA is
> possible because the bus does not decode any ranges. Is anyone more familiar
> with the intent of the spec here?

It is unclear. I agree with you (ie that an empty object implies that
no DMA is possible) but I believe this requires a spec update to avoid
any forthcoming issue; it should not be a real problem (other than
a FW bug) but it is better to be on the safe side.

Thanks,
Lorenzo

> Thanks,
> Robin.
> 
> > +
> > +		r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL);
> > +		if (!r) {
> > +			ret = -ENOMEM;
> > +			goto out;
> > +		}
> > +
> > +		*map = r;
> > +
> >   		list_for_each_entry(rentry, &list, node) {
> > -			if (dma_offset && rentry->offset != dma_offset) {
> > +			if (rentry->res->start >= rentry->res->end) {
> >   				ret = -EINVAL;
> > -				dev_warn(dma_dev, "Can't handle multiple windows with different offsets\n");
> > +				dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
> >   				goto out;
> >   			}
> > -			dma_offset = rentry->offset;
> > -
> > -			/* Take lower and upper limits */
> > -			if (rentry->res->start < dma_start)
> > -				dma_start = rentry->res->start;
> > -			if (rentry->res->end > dma_end)
> > -				dma_end = rentry->res->end;
> > -		}
> > -		if (dma_start >= dma_end) {
> > -			ret = -EINVAL;
> > -			dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
> > -			goto out;
> > +			r->cpu_start = rentry->res->start;
> > +			r->dma_start = rentry->res->start - rentry->offset;
> > +			r->size = rentry->res->end - rentry->res->start + 1;
> > +			r->offset = rentry->offset;
> > +			r++;
> >   		}
> > -		*dma_addr = dma_start - dma_offset;
> > -		len = dma_end - dma_start;
> > -		*size = max(len, len + 1);
> > -		*offset = dma_offset;
> >   	}
> >    out:
> >   	acpi_dev_free_resource_list(&list);
> > @@ -1639,20 +1640,19 @@ int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
> >   			  const u32 *input_id)
> >   {
> >   	const struct iommu_ops *iommu;
> > -	u64 dma_addr = 0, size = 0;
> >   	if (attr == DEV_DMA_NOT_SUPPORTED) {
> >   		set_dma_ops(dev, &dma_dummy_ops);
> >   		return 0;
> >   	}
> > -	acpi_arch_dma_setup(dev, &dma_addr, &size);
> > +	acpi_arch_dma_setup(dev);
> >   	iommu = acpi_iommu_configure_id(dev, input_id);
> >   	if (PTR_ERR(iommu) == -EPROBE_DEFER)
> >   		return -EPROBE_DEFER;
> > -	arch_setup_dma_ops(dev, dma_addr, size,
> > +	arch_setup_dma_ops(dev, 0, U64_MAX,
> >   				iommu, attr == DEV_DMA_COHERENT);
> >   	return 0;
> > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> > index 0dc1ea0b..e106073 100644
> > --- a/include/acpi/acpi_bus.h
> > +++ b/include/acpi/acpi_bus.h
> > @@ -611,8 +611,7 @@ struct acpi_pci_root {
> >   int acpi_iommu_fwspec_init(struct device *dev, u32 id,
> >   			   struct fwnode_handle *fwnode,
> >   			   const struct iommu_ops *ops);
> > -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> > -		       u64 *size);
> > +int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map);
> >   int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
> >   			   const u32 *input_id);
> >   static inline int acpi_dma_configure(struct device *dev,
> > diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> > index 44975c1..34e0545 100644
> > --- a/include/linux/acpi.h
> > +++ b/include/linux/acpi.h
> > @@ -280,12 +280,12 @@ int acpi_table_parse_madt(enum acpi_madt_type id,
> >   #ifdef CONFIG_ARM64
> >   void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
> > -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size);
> > +void acpi_arch_dma_setup(struct device *dev);
> >   #else
> >   static inline void
> >   acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
> >   static inline void
> > -acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) { }
> > +acpi_arch_dma_setup(struct device *dev) { }
> >   #endif
> >   int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
> > @@ -974,8 +974,7 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
> >   	return DEV_DMA_NOT_SUPPORTED;
> >   }
> > -static inline int acpi_dma_get_range(struct device *dev, u64 *dma_addr,
> > -				     u64 *offset, u64 *size)
> > +static inline int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
> >   {
> >   	return -ENODEV;
> >   }
Lorenzo Pieralisi Aug. 12, 2022, 7:52 a.m. UTC | #5
On Fri, Aug 05, 2022 at 01:46:07PM +0100, Robin Murphy wrote:

[...]

> > -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> > -		       u64 *size)
> > +int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
> >   {
> >   	struct acpi_device *adev;
> >   	LIST_HEAD(list);
> >   	struct resource_entry *rentry;
> >   	int ret;
> >   	struct device *dma_dev = dev;
> > -	u64 len, dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
> > +	int num_ranges = 0;
> > +	struct bus_dma_region *r;
> >   	/*
> >   	 * Walk the device tree chasing an ACPI companion with a _DMA
> > @@ -1525,31 +1526,31 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> >   	ret = acpi_dev_get_dma_resources(adev, &list);
> >   	if (ret > 0) {
> > +		list_for_each_entry(rentry, &list, node)
> > +			num_ranges++;
> 
> We already have the number of resources in ret.
> 
> Looking at this, I also now wonder if we're doing the right thing if the
> object is present but contains no resources. The spec isn't clear whether
> that's even really valid, but if it is, is it meaningful? It seems we'd
> currently consider an empty object equivalent to no object, but if anything
> it should perhaps be interpreted as the opposite, i.e. that no DMA is
> possible because the bus does not decode any ranges. Is anyone more familiar
> with the intent of the spec here?

I think we are currently considering no object differently from an
empty object, since for no object we would return -ENODEV in
acpi_dma_get_range(), we would not even get to parsing the resources
(and return 0) and we would fall back to checking IORT to gather the
DMA address space size.

I think you are right, we should change the behaviour if an object
is present but it has no resources though, by reading the specs an
empty _DMA object implies no DMA is possible and that's not what
we are doing at the moment (hopefully there is no firmware out
there with such a set-up but there is only one way to discover it).

This behavioural change should be a separate patch obviously for
bisectability (and a possible revert).

Lorenzo

> Thanks,
> Robin.
> 
> > +
> > +		r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL);
> > +		if (!r) {
> > +			ret = -ENOMEM;
> > +			goto out;
> > +		}
> > +
> > +		*map = r;
> > +
> >   		list_for_each_entry(rentry, &list, node) {
> > -			if (dma_offset && rentry->offset != dma_offset) {
> > +			if (rentry->res->start >= rentry->res->end) {
> >   				ret = -EINVAL;
> > -				dev_warn(dma_dev, "Can't handle multiple windows with different offsets\n");
> > +				dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
> >   				goto out;
> >   			}
> > -			dma_offset = rentry->offset;
> > -
> > -			/* Take lower and upper limits */
> > -			if (rentry->res->start < dma_start)
> > -				dma_start = rentry->res->start;
> > -			if (rentry->res->end > dma_end)
> > -				dma_end = rentry->res->end;
> > -		}
> > -		if (dma_start >= dma_end) {
> > -			ret = -EINVAL;
> > -			dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
> > -			goto out;
> > +			r->cpu_start = rentry->res->start;
> > +			r->dma_start = rentry->res->start - rentry->offset;
> > +			r->size = rentry->res->end - rentry->res->start + 1;
> > +			r->offset = rentry->offset;
> > +			r++;
> >   		}
> > -		*dma_addr = dma_start - dma_offset;
> > -		len = dma_end - dma_start;
> > -		*size = max(len, len + 1);
> > -		*offset = dma_offset;
> >   	}
> >    out:
> >   	acpi_dev_free_resource_list(&list);
> > @@ -1639,20 +1640,19 @@ int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
> >   			  const u32 *input_id)
> >   {
> >   	const struct iommu_ops *iommu;
> > -	u64 dma_addr = 0, size = 0;
> >   	if (attr == DEV_DMA_NOT_SUPPORTED) {
> >   		set_dma_ops(dev, &dma_dummy_ops);
> >   		return 0;
> >   	}
> > -	acpi_arch_dma_setup(dev, &dma_addr, &size);
> > +	acpi_arch_dma_setup(dev);
> >   	iommu = acpi_iommu_configure_id(dev, input_id);
> >   	if (PTR_ERR(iommu) == -EPROBE_DEFER)
> >   		return -EPROBE_DEFER;
> > -	arch_setup_dma_ops(dev, dma_addr, size,
> > +	arch_setup_dma_ops(dev, 0, U64_MAX,
> >   				iommu, attr == DEV_DMA_COHERENT);
> >   	return 0;
> > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> > index 0dc1ea0b..e106073 100644
> > --- a/include/acpi/acpi_bus.h
> > +++ b/include/acpi/acpi_bus.h
> > @@ -611,8 +611,7 @@ struct acpi_pci_root {
> >   int acpi_iommu_fwspec_init(struct device *dev, u32 id,
> >   			   struct fwnode_handle *fwnode,
> >   			   const struct iommu_ops *ops);
> > -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> > -		       u64 *size);
> > +int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map);
> >   int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
> >   			   const u32 *input_id);
> >   static inline int acpi_dma_configure(struct device *dev,
> > diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> > index 44975c1..34e0545 100644
> > --- a/include/linux/acpi.h
> > +++ b/include/linux/acpi.h
> > @@ -280,12 +280,12 @@ int acpi_table_parse_madt(enum acpi_madt_type id,
> >   #ifdef CONFIG_ARM64
> >   void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
> > -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size);
> > +void acpi_arch_dma_setup(struct device *dev);
> >   #else
> >   static inline void
> >   acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
> >   static inline void
> > -acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) { }
> > +acpi_arch_dma_setup(struct device *dev) { }
> >   #endif
> >   int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
> > @@ -974,8 +974,7 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
> >   	return DEV_DMA_NOT_SUPPORTED;
> >   }
> > -static inline int acpi_dma_get_range(struct device *dev, u64 *dma_addr,
> > -				     u64 *offset, u64 *size)
> > +static inline int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
> >   {
> >   	return -ENODEV;
> >   }
diff mbox series

Patch

diff --git a/drivers/acpi/arm64/dma.c b/drivers/acpi/arm64/dma.c
index f16739a..64a41b2 100644
--- a/drivers/acpi/arm64/dma.c
+++ b/drivers/acpi/arm64/dma.c
@@ -4,11 +4,12 @@ 
 #include <linux/device.h>
 #include <linux/dma-direct.h>
 
-void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
+void acpi_arch_dma_setup(struct device *dev)
 {
 	int ret;
 	u64 end, mask;
-	u64 dmaaddr = 0, size = 0, offset = 0;
+	u64 size = 0;
+	const struct bus_dma_region *map = NULL;
 
 	/*
 	 * If @dev is expected to be DMA-capable then the bus code that created
@@ -26,7 +27,33 @@  void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
 	else
 		size = 1ULL << 32;
 
-	ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
+	ret = acpi_dma_get_range(dev, &map);
+	if (!ret) {
+		const struct bus_dma_region *r = map;
+		u64 dma_start, dma_end = 0;
+
+		/* determine the overall bounds of all dma regions */
+		for (dma_start = U64_MAX; r->size; r++) {
+
+			/* Take lower and upper limits */
+			if (r->dma_start < dma_start)
+				dma_start = r->dma_start;
+			if (r->dma_start + r->size - 1 > dma_end)
+				dma_end = r->dma_start + r->size - 1;
+		}
+
+		if (dma_start >= dma_end) {
+			dev_dbg(dev, "Invalid DMA regions configuration\n");
+			return;
+		}
+
+		mask = DMA_BIT_MASK(ilog2(dma_end) + 1);
+		dev->bus_dma_limit = dma_end;
+		dev->dma_range_map = map;
+		dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
+		*dev->dma_mask = min(*dev->dma_mask, mask);
+	}
+
 	if (ret == -ENODEV)
 		ret = iort_dma_get_ranges(dev, &size);
 	if (!ret) {
@@ -34,17 +61,12 @@  void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
 		 * Limit coherent and dma mask based on size retrieved from
 		 * firmware.
 		 */
-		end = dmaaddr + size - 1;
+		end = size - 1;
 		mask = DMA_BIT_MASK(ilog2(end) + 1);
 		dev->bus_dma_limit = end;
 		dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
 		*dev->dma_mask = min(*dev->dma_mask, mask);
-	}
 
-	*dma_addr = dmaaddr;
-	*dma_size = size;
-
-	ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size);
-
-	dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" : "");
+		ret = dma_direct_set_offset(dev, 0, 0, size);
+	}
 }
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 762b61f..736517e 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -20,6 +20,7 @@ 
 #include <linux/platform_data/x86/apple.h>
 #include <linux/pgtable.h>
 #include <linux/crc32.h>
+#include <linux/dma-direct.h>
 
 #include "internal.h"
 
@@ -1492,15 +1493,15 @@  enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
  *
  * Return 0 on success, < 0 on failure.
  */
-int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
-		       u64 *size)
+int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
 {
 	struct acpi_device *adev;
 	LIST_HEAD(list);
 	struct resource_entry *rentry;
 	int ret;
 	struct device *dma_dev = dev;
-	u64 len, dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
+	int num_ranges = 0;
+	struct bus_dma_region *r;
 
 	/*
 	 * Walk the device tree chasing an ACPI companion with a _DMA
@@ -1525,31 +1526,31 @@  int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
 
 	ret = acpi_dev_get_dma_resources(adev, &list);
 	if (ret > 0) {
+		list_for_each_entry(rentry, &list, node)
+			num_ranges++;
+
+		r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL);
+		if (!r) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		*map = r;
+
 		list_for_each_entry(rentry, &list, node) {
-			if (dma_offset && rentry->offset != dma_offset) {
+			if (rentry->res->start >= rentry->res->end) {
 				ret = -EINVAL;
-				dev_warn(dma_dev, "Can't handle multiple windows with different offsets\n");
+				dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
 				goto out;
 			}
-			dma_offset = rentry->offset;
-
-			/* Take lower and upper limits */
-			if (rentry->res->start < dma_start)
-				dma_start = rentry->res->start;
-			if (rentry->res->end > dma_end)
-				dma_end = rentry->res->end;
-		}
 
-		if (dma_start >= dma_end) {
-			ret = -EINVAL;
-			dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
-			goto out;
+			r->cpu_start = rentry->res->start;
+			r->dma_start = rentry->res->start - rentry->offset;
+			r->size = rentry->res->end - rentry->res->start + 1;
+			r->offset = rentry->offset;
+			r++;
 		}
 
-		*dma_addr = dma_start - dma_offset;
-		len = dma_end - dma_start;
-		*size = max(len, len + 1);
-		*offset = dma_offset;
 	}
  out:
 	acpi_dev_free_resource_list(&list);
@@ -1639,20 +1640,19 @@  int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
 			  const u32 *input_id)
 {
 	const struct iommu_ops *iommu;
-	u64 dma_addr = 0, size = 0;
 
 	if (attr == DEV_DMA_NOT_SUPPORTED) {
 		set_dma_ops(dev, &dma_dummy_ops);
 		return 0;
 	}
 
-	acpi_arch_dma_setup(dev, &dma_addr, &size);
+	acpi_arch_dma_setup(dev);
 
 	iommu = acpi_iommu_configure_id(dev, input_id);
 	if (PTR_ERR(iommu) == -EPROBE_DEFER)
 		return -EPROBE_DEFER;
 
-	arch_setup_dma_ops(dev, dma_addr, size,
+	arch_setup_dma_ops(dev, 0, U64_MAX,
 				iommu, attr == DEV_DMA_COHERENT);
 
 	return 0;
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 0dc1ea0b..e106073 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -611,8 +611,7 @@  struct acpi_pci_root {
 int acpi_iommu_fwspec_init(struct device *dev, u32 id,
 			   struct fwnode_handle *fwnode,
 			   const struct iommu_ops *ops);
-int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
-		       u64 *size);
+int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map);
 int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
 			   const u32 *input_id);
 static inline int acpi_dma_configure(struct device *dev,
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 44975c1..34e0545 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -280,12 +280,12 @@  int acpi_table_parse_madt(enum acpi_madt_type id,
 
 #ifdef CONFIG_ARM64
 void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
-void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size);
+void acpi_arch_dma_setup(struct device *dev);
 #else
 static inline void
 acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
 static inline void
-acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) { }
+acpi_arch_dma_setup(struct device *dev) { }
 #endif
 
 int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
@@ -974,8 +974,7 @@  static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
 	return DEV_DMA_NOT_SUPPORTED;
 }
 
-static inline int acpi_dma_get_range(struct device *dev, u64 *dma_addr,
-				     u64 *offset, u64 *size)
+static inline int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
 {
 	return -ENODEV;
 }