Message ID | 20210421164317.1718831-1-maz@kernel.org |
---|---|
Headers | show |
Series | arm64: ACPI GTDT watchdog fixes | expand |
On Wed, Apr 21, 2021 at 05:43:15PM +0100, Marc Zyngier wrote: > Dann recently reported that his ThunderX machine failed to boot since > 64b499d8df40 ("irqchip/gic-v3: Configure SGIs as standard > interrupts"), with a not so pretty crash while trying to send an IPI. > > It turned out to be caused by a mix of broken firmware and a buggy > GTDT watchdog driver. Both have forever been buggy, but the above > commit revealed that the error handling path of the driver was > probably the worse part of it all. > > Anyway, this short series has two goals: > - handle broken firmware in a less broken way > - make sure that the route cause of the problem can be identified > quickly > > Thanks, > > M. > > Marc Zyngier (2): > ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure > ACPI: irq: Prevent unregistering of GIC SGIs > > drivers/acpi/arm64/gtdt.c | 10 ++++++---- > drivers/acpi/irq.c | 6 +++++- > 2 files changed, 11 insertions(+), 5 deletions(-) Patch(2) needs an ACK from Rafael - usually these patches go via the ARM64 tree but I don't think it is compulsory for this series. Thank you ! Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
On Thu, Apr 22, 2021 at 03:23:42PM +0100, Lorenzo Pieralisi wrote: > On Wed, Apr 21, 2021 at 05:43:15PM +0100, Marc Zyngier wrote: > > Dann recently reported that his ThunderX machine failed to boot since > > 64b499d8df40 ("irqchip/gic-v3: Configure SGIs as standard > > interrupts"), with a not so pretty crash while trying to send an IPI. > > > > It turned out to be caused by a mix of broken firmware and a buggy > > GTDT watchdog driver. Both have forever been buggy, but the above > > commit revealed that the error handling path of the driver was > > probably the worse part of it all. > > > > Anyway, this short series has two goals: > > - handle broken firmware in a less broken way > > - make sure that the route cause of the problem can be identified > > quickly > > > > Thanks, > > > > M. > > > > Marc Zyngier (2): > > ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure > > ACPI: irq: Prevent unregistering of GIC SGIs > > > > drivers/acpi/arm64/gtdt.c | 10 ++++++---- > > drivers/acpi/irq.c | 6 +++++- > > 2 files changed, 11 insertions(+), 5 deletions(-) > > Patch(2) needs an ACK from Rafael - usually these patches go via > the ARM64 tree but I don't think it is compulsory for this series. > > Thank you ! > > Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Thanks Lorenzo. Rafael, if there are no objections, I'll take these two patches in the arm64 tree. -- Catalin
On Wed, 21 Apr 2021 17:43:15 +0100, Marc Zyngier wrote: > Dann recently reported that his ThunderX machine failed to boot since > 64b499d8df40 ("irqchip/gic-v3: Configure SGIs as standard > interrupts"), with a not so pretty crash while trying to send an IPI. > > It turned out to be caused by a mix of broken firmware and a buggy > GTDT watchdog driver. Both have forever been buggy, but the above > commit revealed that the error handling path of the driver was > probably the worse part of it all. > > [...] Applied to arm64 (for-next/core), thanks! [1/2] ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure https://git.kernel.org/arm64/c/1ecd5b129252 [2/2] ACPI: irq: Prevent unregistering of GIC SGIs https://git.kernel.org/arm64/c/2a20b08f06e7 -- Catalin