=== modified file 'linaro-hwpack-install'
--- linaro-hwpack-install	2013-02-21 14:40:45 +0000
+++ linaro-hwpack-install	2013-08-08 07:44:38 +0000
@@ -1,8 +1,7 @@
 #!/bin/sh
 # linaro-hwpack-install - Install a Linaro Hardware Pack.
-#   This script is meant to run inside a chroot containing nothing other than
-#   ubuntu-minimal, so it must not depend on anything that's not in
-#   there.
+#   This script is meant to run inside a chroot. It must not depend on anything
+#   that's not in there.
 # TODO: When upgrading to a newer hwpack, make sure packages and apt sources
 # that are no longer needed are removed.
 
@@ -44,6 +43,7 @@
 SUPPORTED_FORMATS="1.0 2.0 3.0"  # A space-separated list of hwpack formats.
 FLASH_KERNEL_SKIP="true" 
 export FLASH_KERNEL_SKIP # skip attempting to run flash-kernel-hooks
+DISTRIBUTION=`grep '^ID=' /etc/os-release | sed 's/ID=//'`
 
 sudo="sudo"
 if [ $(id -u) -eq 0 ]; then
@@ -129,7 +129,7 @@
         "Try using a newer version of $(basename $0)."
 
   # Check the architecture of the hwpack matches that of the host system.
-  if [ "x$EXTRACT_KERNEL_ONLY" = "xno" ]; then
+  if [ "x$EXTRACT_KERNEL_ONLY" = "xno" -a "$DISTRIBUTION" = "ubuntu" ]; then
     # TODO: create a generic way to identify the architecture, without depending on dpkg
     [ "$HWPACK_ARCH" = `dpkg --print-architecture` ] || \
       die "Hardware pack architecture ($HWPACK_ARCH) does not match the host's architecture"
@@ -269,14 +269,49 @@
   # We assume the hwpack is always available at the rootfs
   ROOTFS_DIR=$(dirname $HWPACK_TARBALL)
 
+  DEB_DIR="${TEMP_DIR}/extracted"
+  mkdir -p ${DEB_DIR}
+
   ls ${HWPACK_DIR}/pkgs/linux-[ih]*.deb | while read pkg; do
     echo "Extracting package `basename $pkg`"
-    dpkg-deb -x ${pkg} $ROOTFS_DIR
-  done
+    if [ "$DISTRIBUTION" = "ubuntu" ]; then
+      dpkg-deb -x ${pkg} $ROOTFS_DIR
+    elif [ "$DISTRIBUTION" = "fedora" ]; then
+      ar x ${pkg}
+      tar -xf data.tar.* -C ${DEB_DIR}
+      rm -f debian-binary control.tar.gz data.tar.*
+    fi
+  done
+
+  ls ${HWPACK_DIR}/pkgs/arndale-pre-boot_*.deb | while read pkg; do
+    echo "Extracting package `basename $pkg`"
+    if [ "$DISTRIBUTION" = "ubuntu" ]; then
+      dpkg-deb -x ${pkg} $ROOTFS_DIR
+    elif [ "$DISTRIBUTION" = "fedora" ]; then
+      ar x ${pkg}
+      tar -xf data.tar.* -C ${DEB_DIR}
+      rm -f debian-binary control.tar.gz data.tar.*
+    fi
+  done
+
+  if [ "$DISTRIBUTION" = "fedora" ]; then
+      cp -a ${DEB_DIR}/boot/* /boot/
+      cp -a ${DEB_DIR}/lib/modules/* /usr/lib/modules/
+      cp -a ${DEB_DIR}/lib/firmware/* /usr/lib/firmware/
+  fi
+
+  if [ -d "${HWPACK_DIR}/u_boot" ]; then
+    cp -a ${HWPACK_DIR}/u_boot/usr/lib/* /usr/lib
+  fi
+
+  if [ -d "${HWPACK_DIR}/uefi" ]; then
+    cp -a ${HWPACK_DIR}/uefi/usr/lib/* /usr/lib
+  fi
 
   # manually generate modules.dep
   ls $ROOTFS_DIR/lib/modules | while read kernel; do
     depmod -b $ROOTFS_DIR ${kernel} || true
+    [ "$DISTRIBUTION" = "fedora" ] && dracut /boot/initrd.img-${kernel} ${kernel}
   done;
 }
 
@@ -284,7 +319,7 @@
   # Ensure our temp dir and apt sources are removed.
   echo -n "Cleaning up ..."
   rm -rf $TEMP_DIR
-  if [ "x$EXTRACT_KERNEL_ONLY" = "xno" ]; then
+  if [ "x$EXTRACT_KERNEL_ONLY" = "xno" -a "$DISTRIBUTION" = "ubuntu" ]; then
     rm -f /usr/sbin/policy-rc.d
     mv -f /sbin/start-stop-daemon.REAL /sbin/start-stop-daemon
     if [ -x /sbin/initctl.REAL ]; then
@@ -318,7 +353,7 @@
 setup_hwpack
 
 # In case we only care about the kernel, don't mess up with the system
-if [ "x$EXTRACT_KERNEL_ONLY" = "xno" ]; then
+if [ "x$EXTRACT_KERNEL_ONLY" = "xno" -a "$DISTRIBUTION" = "ubuntu" ]; then
   setup_apt_sources
   setup_ubuntu_rootfs
   install_deb_packages

=== modified file 'linaro-media-create'
--- linaro-media-create	2013-08-16 09:30:08 +0000
+++ linaro-media-create	2013-08-17 05:10:14 +0000
@@ -181,12 +181,6 @@
         # The binary image is in the new live format.
         filesystem_dir = 'binary/boot/filesystem.dir'
 
-    # if not a debian compatible system, just extract the kernel packages
-    extract_kpkgs = False
-    if not path_in_tarfile_exists(
-            os.path.join(filesystem_dir, 'etc', 'debian_version'), args.binary):
-        extract_kpkgs = True
-
     ROOTFS_DIR = os.path.join(BIN_DIR, filesystem_dir)
 
     try:
@@ -209,6 +203,24 @@
 
     unpack_binary_tarball(args.binary, BIN_DIR)
 
+    # if compatible system, extract all packages
+    os_release_id = 'linux'
+    os_release_file = '%s/etc/os-release' % ROOTFS_DIR
+    if os.path.exists(os_release_file):
+        for line in open(os_release_file):
+            if line.startswith('ID='):
+                os_release_id = line[(len('ID=')):]
+                os_release_id = os_release_id.strip('\"\n')
+                break
+
+    if os_release_id == 'debian' or os_release_id == 'ubuntu' or \
+            os.path.exists('%s/etc/debian_version' % ROOTFS_DIR):
+        extract_kpkgs = False
+    elif os_release_id == 'fedora':
+        extract_kpkgs = False
+    else:
+        extract_kpkgs = True
+
     hwpacks = args.hwpacks
     lmc_dir = os.path.dirname(__file__)
     if lmc_dir == '':
@@ -263,6 +275,6 @@
         populate_rootfs(ROOTFS_DIR, ROOT_DISK, root_partition, args.rootfs,
             rootfs_id, create_swap, str(args.swap_file),
             board_config.mmc_device_id, board_config.mmc_part_offset,
-            board_config)
+            os_release_id, board_config)
 
     logger.info("Done creating Linaro image on %s" % media.path)

=== modified file 'linaro_image_tools/media_create/chroot_utils.py'
--- linaro_image_tools/media_create/chroot_utils.py	2013-02-17 13:53:41 +0000
+++ linaro_image_tools/media_create/chroot_utils.py	2013-08-08 07:44:38 +0000
@@ -105,7 +105,7 @@
     print "Installing (linaro-hwpack-install) %s in target rootfs." % (
         hwpack_basename)
 
-    # Get infromation required by linaro-hwpack-install
+    # Get information required by linaro-hwpack-install
     with HardwarepackHandler([hwpack_file]) as hwpack:
         version, _ = hwpack.get_field("version")
         architecture, _ = hwpack.get_field("architecture")

=== modified file 'linaro_image_tools/media_create/rootfs.py'
--- linaro_image_tools/media_create/rootfs.py	2013-02-17 13:53:41 +0000
+++ linaro_image_tools/media_create/rootfs.py	2013-08-08 07:44:38 +0000
@@ -43,7 +43,8 @@
 
 def populate_rootfs(content_dir, root_disk, partition, rootfs_type,
                     rootfs_id, should_create_swap, swap_size,
-                    mmc_device_id, partition_offset, board_config=None):
+                    mmc_device_id, partition_offset, os_release_id,
+                    board_config=None):
     """Populate the rootfs and make the necessary tweaks to make it usable.
 
     This consists of:
@@ -86,13 +87,14 @@
 
         append_to_fstab(root_disk, fstab_additions)
 
-        print "\nCreating /etc/flash-kernel.conf\n"
-        create_flash_kernel_config(
-            root_disk, mmc_device_id, 1 + partition_offset)
+        if os_release_id == 'debian' or os_release_id == 'ubuntu':
+            print "\nCreating /etc/flash-kernel.conf\n"
+            create_flash_kernel_config(
+                root_disk, mmc_device_id, 1 + partition_offset)
 
-        if board_config is not None:
-            print "\nUpdating /etc/network/interfaces\n"
-            update_network_interfaces(root_disk, board_config)
+            if board_config is not None:
+                print "\nUpdating /etc/network/interfaces\n"
+                update_network_interfaces(root_disk, board_config)
 
 
 def update_network_interfaces(root_disk, board_config):
@@ -136,7 +138,8 @@
     not be world-readable.
     """
     p = cmd_runner.run(
-        ['find', directory, '-maxdepth', '1', '-mindepth', '1'],
+        ['find', directory, '-maxdepth', '1', '-mindepth', '1',
+         '!', '-name', 'lost+found'],
         stdout=subprocess.PIPE, as_root=True)
     stdout, _ = p.communicate()
     return stdout.split()

=== modified file 'linaro_image_tools/media_create/tests/test_media_create.py'
--- linaro_image_tools/media_create/tests/test_media_create.py	2013-08-16 08:01:22 +0000
+++ linaro_image_tools/media_create/tests/test_media_create.py	2013-08-17 05:05:41 +0000
@@ -3673,7 +3673,8 @@
         populate_rootfs(
             contents_dir, root_disk, partition='/dev/rootfs',
             rootfs_type='ext3', rootfs_id='UUID=uuid', should_create_swap=True,
-            swap_size=100, mmc_device_id=0, partition_offset=0)
+            swap_size=100, mmc_device_id=0, partition_offset=0,
+            os_release_id='ubuntu', board_config=None)
 
         self.assertEqual(
             ['UUID=uuid / ext3  errors=remount-ro 0 1',

=== modified file 'linaro_image_tools/media_create/unpack_binary_tarball.py'
--- linaro_image_tools/media_create/unpack_binary_tarball.py	2012-06-13 14:11:28 +0000
+++ linaro_image_tools/media_create/unpack_binary_tarball.py	2013-08-08 07:44:38 +0000
@@ -29,8 +29,11 @@
 
 
 def unpack_binary_tarball(tarball, unpack_dir, as_root=True):
+    extract_opt = '-xf'
+    if tarball.endswith('.xz'):
+        extract_opt = '-Jxf'
     proc = cmd_runner.run(
-        ['tar', '--numeric-owner', '-C', unpack_dir, '-xf', tarball],
+        ['tar', '--numeric-owner', '-C', unpack_dir, extract_opt, tarball],
         as_root=as_root)
     proc.wait()
     return proc.returncode

=== modified file 'linaro_image_tools/utils.py'
--- linaro_image_tools/utils.py	2013-08-06 07:25:33 +0000
+++ linaro_image_tools/utils.py	2013-08-08 07:44:38 +0000
@@ -89,11 +89,21 @@
 def path_in_tarfile_exists(path, tar_file):
     exists = True
     try:
-        tarinfo = tarfile.open(tar_file, 'r:gz')
+        tarinfo = tarfile.open(tar_file, 'r:*')
         tarinfo.getmember(path)
         tarinfo.close()
     except KeyError:
         exists = False
+    except (tarfile.ReadError, tarfile.CompressionError):
+        exists = False
+        # Fallback to tar command
+        cmd = ['tar', '-tf', tar_file, '--wildcards', '*' + path]
+        proc = cmd_runner.run(cmd,
+                              stdout=open('/dev/null', 'w'),
+                              stderr=open('/dev/null', 'w'))
+        proc.wait()
+        if proc.returncode == 0:
+            exists = True
     finally:
         return exists
 

