diff --git a/sysdeps/tile/__longjmp.S b/sysdeps/tile/__longjmp.S
index c9902b1..7247af8 100644
--- a/sysdeps/tile/__longjmp.S
+++ b/sysdeps/tile/__longjmp.S
@@ -28,7 +28,7 @@
 ENTRY (__longjmp)
 	FEEDBACK_ENTER(__longjmp)
 
-#define RESTORE(r) { LD r, r0 ; ADDI_PTR r0, r0, REGSIZE }
+#define RESTORE(r) { ld r, r0 ; ADDI_PTR r0, r0, REGSIZE }
 	FOR_EACH_CALLEE_SAVED_REG(RESTORE)
 
 	/* Make longjmp(buf, 0) return "1" instead.
@@ -36,9 +36,9 @@ ENTRY (__longjmp)
 	   we can validly load EX_CONTEXT for iret without being
 	   interrupted halfway through.  */
 	{
-	 LD r2, r0   /* retrieve ICS bit from jmp_buf */
+	 ld r2, r0   /* retrieve ICS bit from jmp_buf */
 	 movei r3, 1
-	 CMPEQI r0, r1, 0
+	 cmpeqi r0, r1, 0
 	}
 	{
 	 mtspr INTERRUPT_CRITICAL_SECTION, r3
diff --git a/sysdeps/tile/__tls_get_addr.S b/sysdeps/tile/__tls_get_addr.S
index 2402bd1..ea9470a 100644
--- a/sysdeps/tile/__tls_get_addr.S
+++ b/sysdeps/tile/__tls_get_addr.S
@@ -53,20 +53,20 @@ ENTRY (__tls_get_addr)
 	}
 	{
 	 LD_PTR r29, r29	/* r29 = ti_offset */
-	 CMPEQ r25, r28, r25	/* r25 nonzero if generation OK */
+	 cmpeq r25, r28, r25	/* r25 nonzero if generation OK */
 	 shli r28, r26, LOG_SIZEOF_DTV_T  /* byte index into dtv array */
 	}
 	{
-	 BEQZ r25, .Lslowpath
-	 CMPEQI r25, r26, -1	/* r25 nonzero if ti_module invalid */
+	 beqz r25, .Lslowpath
+	 cmpeqi r25, r26, -1	/* r25 nonzero if ti_module invalid */
 	}
 	{
-	 BNEZ r25, .Lslowpath
+	 bnez r25, .Lslowpath
 	 ADD_PTR r28, r28, r27	/* pointer into module array */
 	}
 	LD_PTR r26, r28		/* r26 = module TLS pointer */
-	CMPEQI r25, r26, -1     /* check r26 == TLS_DTV_UNALLOCATED */
-	BNEZ r25, .Lslowpath
+	cmpeqi r25, r26, -1     /* check r26 == TLS_DTV_UNALLOCATED */
+	bnez r25, .Lslowpath
 	{
 	 ADD_PTR r0, r26, r29
 	 jrp lr
@@ -74,68 +74,68 @@ ENTRY (__tls_get_addr)
 
 .Lslowpath:
 	{
-	 ST sp, lr
+	 st sp, lr
 	 ADDLI_PTR r29, sp, - (25 * REGSIZE)
 	}
 	cfi_offset (lr, 0)
 	{
-	 ST r29, sp
+	 st r29, sp
 	 ADDLI_PTR sp, sp, - (26 * REGSIZE)
 	}
 	cfi_def_cfa_offset (26 * REGSIZE)
 	ADDI_PTR r29, sp, (2 * REGSIZE)
-	{ ST r29, r1;  ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r2;  ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r3;  ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r4;  ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r5;  ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r6;  ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r7;  ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r8;  ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r9;  ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r10; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r11; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r12; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r13; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r14; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r15; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r16; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r17; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r18; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r19; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r20; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r21; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r22; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r23; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r24; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r1;  ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r2;  ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r3;  ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r4;  ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r5;  ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r6;  ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r7;  ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r8;  ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r9;  ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r10; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r11; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r12; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r13; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r14; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r15; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r16; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r17; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r18; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r19; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r20; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r21; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r22; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r23; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r24; ADDI_PTR r29, r29, REGSIZE }
 	.hidden __tls_get_addr_slow
 	jal __tls_get_addr_slow
 	ADDI_PTR r29, sp, (2 * REGSIZE)
-	{ LD r1,  r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r2,  r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r3,  r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r4,  r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r5,  r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r6,  r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r7,  r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r8,  r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r9,  r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r10, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r11, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r12, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r13, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r14, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r15, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r16, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r17, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r18, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r19, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r20, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r21, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r22, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r23, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r24, r29; ADDLI_PTR sp, sp, (26 * REGSIZE) }
+	{ ld r1,  r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r2,  r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r3,  r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r4,  r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r5,  r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r6,  r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r7,  r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r8,  r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r9,  r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r10, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r11, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r12, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r13, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r14, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r15, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r16, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r17, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r18, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r19, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r20, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r21, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r22, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r23, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r24, r29; ADDLI_PTR sp, sp, (26 * REGSIZE) }
 	cfi_def_cfa_offset (0)
-	LD lr, sp
+	ld lr, sp
 	jrp lr
 END (__tls_get_addr)
diff --git a/sysdeps/tile/_mcount.S b/sysdeps/tile/_mcount.S
index c350084..d6ecb93 100644
--- a/sysdeps/tile/_mcount.S
+++ b/sysdeps/tile/_mcount.S
@@ -33,27 +33,27 @@
 	.text
 ENTRY(__mcount)
 	{
-	 ST sp, lr
+	 st sp, lr
 	 ADDI_PTR r29, sp, - (12 * REGSIZE)
 	}
 	cfi_offset (lr, 0)
 	{
 	 ADDI_PTR sp, sp, - (13 * REGSIZE)
-	 ST r29, sp
+	 st r29, sp
 	 ADDI_PTR r29, r29, REGSIZE
 	}
 	cfi_def_cfa_offset (13 * REGSIZE)
-	{ ST r29, r0; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r1; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r2; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r3; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r4; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r5; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r6; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r7; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r8; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r9; ADDI_PTR r29, r29, REGSIZE }
-	{ ST r29, r10; ADDI_PTR r29, r29, REGSIZE; move r0, r10 }
+	{ st r29, r0; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r1; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r2; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r3; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r4; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r5; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r6; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r7; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r8; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r9; ADDI_PTR r29, r29, REGSIZE }
+	{ st r29, r10; ADDI_PTR r29, r29, REGSIZE; move r0, r10 }
 	{
 	 move r1, lr
 	 jal __mcount_internal
@@ -61,20 +61,20 @@ ENTRY(__mcount)
 	{
 	 ADDI_PTR r29, sp, (2 * REGSIZE)
 	}
-	{ LD r0, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r1, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r2, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r3, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r4, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r5, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r6, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r7, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r8, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r9, r29; ADDI_PTR r29, r29, REGSIZE }
-	{ LD r10, r29; ADDI_PTR sp, sp, (13 * REGSIZE) }
+	{ ld r0, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r1, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r2, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r3, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r4, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r5, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r6, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r7, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r8, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r9, r29; ADDI_PTR r29, r29, REGSIZE }
+	{ ld r10, r29; ADDI_PTR sp, sp, (13 * REGSIZE) }
 	cfi_def_cfa_offset (0)
 	{
-	 LD lr, sp
+	 ld lr, sp
 	}
 	{
 	 move lr, r10
diff --git a/sysdeps/tile/crti.S b/sysdeps/tile/crti.S
index 1d714ab..08b9779 100644
--- a/sysdeps/tile/crti.S
+++ b/sysdeps/tile/crti.S
@@ -63,10 +63,10 @@ _init:
 	{
 	 move r29, sp
 	 ADDI_PTR r28, sp, -REGSIZE
-	 ST sp, lr
+	 st sp, lr
 	}
 	ADDI_PTR sp, sp, -(2 * REGSIZE)
-	ST r28, r29
+	st r28, r29
 #if PREINIT_FUNCTION_WEAK
 	lnk r2
 0:
@@ -82,7 +82,7 @@ _init:
 	ADD_PTR r0, r0, r1
 	ADD_PTR r0, r0, r2
 	LD_PTR r0, r0
-	BEQZ r0, .Lno_weak_fn
+	beqz r0, .Lno_weak_fn
 	jalr r0
 #elif !defined(NO_PLT_PCREL)
 	/* Since we are calling from the start of the object to the PLT,
@@ -107,7 +107,7 @@ _fini:
 	{
 	 move r29, sp
 	 ADDI_PTR r28, sp, -REGSIZE
-	 ST sp, lr
+	 st sp, lr
 	}
 	ADDI_PTR sp, sp, -(2 * REGSIZE)
-	ST r28, r29
+	st r28, r29
diff --git a/sysdeps/tile/crtn.S b/sysdeps/tile/crtn.S
index 53c6e40..d45bfad 100644
--- a/sysdeps/tile/crtn.S
+++ b/sysdeps/tile/crtn.S
@@ -42,7 +42,7 @@
 	ADDI_PTR r29, sp, (2 * REGSIZE)
 	{
 	 ADDI_PTR sp, sp, (2 * REGSIZE)
-	 LD lr, r29
+	 ld lr, r29
 	}
 	jrp lr
 
@@ -50,6 +50,6 @@
 	ADDI_PTR r29, sp, (2 * REGSIZE)
 	{
 	 ADDI_PTR sp, sp, (2 * REGSIZE)
-	 LD lr, r29
+	 ld lr, r29
 	}
 	jrp lr
diff --git a/sysdeps/tile/dl-start.S b/sysdeps/tile/dl-start.S
index 1782c9c..94deab3 100644
--- a/sysdeps/tile/dl-start.S
+++ b/sysdeps/tile/dl-start.S
@@ -43,7 +43,7 @@ ENTRY (_start)
 	 /* Save zero for caller sp in our 'caller' save area, and make
 	    sure lr has a zero value, to limit backtraces.  */
 	 move lr, zero
-	 ST r4, zero
+	 st r4, zero
 	}
 	{
 	 move r0, r52
@@ -56,8 +56,8 @@ ENTRY (_start)
 	   in which case we have to adjust the argument vector.  */
 	lnk r51; .Llink:
 	pic_addr r4, _dl_skip_args
-	LD4U r4, r4
-	BEQZT r4, .Lno_skip
+	ld4u r4, r4
+	beqzt r4, .Lno_skip
 
 	/* Load the argc word at the initial sp and adjust it.
 	   We basically jump "sp" up over the first few argv entries
diff --git a/sysdeps/tile/dl-trampoline.S b/sysdeps/tile/dl-trampoline.S
index fd7d63d..0d19512 100644
--- a/sysdeps/tile/dl-trampoline.S
+++ b/sysdeps/tile/dl-trampoline.S
@@ -73,8 +73,8 @@
 	f(r20); f(r21); f(r22); f(r23); \
 	f(r24); f(r25)
 
-#define SAVE(REG) { ST r27, REG; ADDI_PTR r27, r27, REGSIZE }
-#define RESTORE(REG) { LD REG, r27; ADDI_PTR r27, r27, REGSIZE }
+#define SAVE(REG) { st r27, REG; ADDI_PTR r27, r27, REGSIZE }
+#define RESTORE(REG) { ld REG, r27; ADDI_PTR r27, r27, REGSIZE }
 
 	.macro dl_resolve, name, profile, framesize
 .text
@@ -86,7 +86,7 @@
 \name:
 	cfi_startproc
 	{
-	 ST sp, lr
+	 st sp, lr
 	 move r26, sp
 	}
 	{
@@ -95,24 +95,24 @@
 	}
 	cfi_def_cfa_offset (\framesize)
 	{
-	 ST r27, r26
+	 st r27, r26
 	 ADDI_PTR r27, r27, FRAME_REGS - FRAME_SP
 	}
 	FOR_EACH_REG(SAVE)
 	{
-	 ST r27, lr
+	 st r27, lr
 	 ADDLI_PTR r27, sp, FRAME_TPNT
 	}
 	cfi_offset (lr, FRAME_LR - \framesize)
 	.if \profile
 	{
 	 move r0, r28  /* tpnt value */
-	 ST r27, r28
+	 st r27, r28
 	 ADDI_PTR r27, r27, FRAME_INDEX - FRAME_TPNT
 	}
 	{
 	 move r1, r29  /* PLT index */
-	 ST r27, r29
+	 st r27, r29
 	}
 	{
 	 move r2, lr  /* retaddr */
@@ -124,7 +124,7 @@
 	}
 	ADDLI_PTR r28, sp, FRAME_STACKFRAME
 	LD_PTR r28, r28
-	BGTZ r28, 1f
+	bgtz r28, 1f
 	.else
 	{
 	 move r0, r28  /* tpnt value 1 */
@@ -141,12 +141,12 @@
 	FOR_EACH_REG(RESTORE)
 	.if \profile
 	ADDLI_PTR r28, sp, FRAME_STACKFRAME
-	LD r28, r28
-	BGTZ r28, 1f
+	ld r28, r28
+	bgtz r28, 1f
 	.endif
 	{
 	 /* Restore original user return address. */
-	 LD lr, r27
+	 ld lr, r27
 	 /* Pop off our stack frame. */
 	 ADDLI_PTR sp, sp, \framesize
 	}
@@ -162,11 +162,11 @@
 	}
 	FOR_EACH_REG(SAVE)
 	{
-	 LD r0, r28
+	 ld r0, r28
 	 ADDI_PTR r28, r28, FRAME_INDEX - FRAME_TPNT
 	}
         {
-	 LD r1, r28
+	 ld r1, r28
 	 ADDLI_PTR r2, sp, FRAME_REGS
 	}
 	{
@@ -179,7 +179,7 @@
         }
 	FOR_EACH_REG(RESTORE)
 	{
-	 LD lr, lr
+	 ld lr, lr
 	 ADDLI_PTR sp, sp, \framesize
 	}
 	jrp lr
diff --git a/sysdeps/tile/setjmp.S b/sysdeps/tile/setjmp.S
index 0321c10..534d57b 100644
--- a/sysdeps/tile/setjmp.S
+++ b/sysdeps/tile/setjmp.S
@@ -36,11 +36,11 @@ ENTRY(__sigsetjmp)
 1:
 	move r2, r0
 
-#define SAVE(r) { ST r2, r ; ADDI_PTR r2, r2, REGSIZE }
+#define SAVE(r) { st r2, r ; ADDI_PTR r2, r2, REGSIZE }
 	FOR_EACH_CALLEE_SAVED_REG(SAVE)
 
 	mfspr r3, INTERRUPT_CRITICAL_SECTION
-	ST r2, r3
+	st r2, r3
 	j plt(__sigjmp_save)
 	jrp lr   /* Keep the backtracer happy. */
 END(__sigsetjmp)
diff --git a/sysdeps/tile/start.S b/sysdeps/tile/start.S
index da3ba9c..7cdabed 100644
--- a/sysdeps/tile/start.S
+++ b/sysdeps/tile/start.S
@@ -109,11 +109,11 @@ _start:
 
 	 /* Zero out callee space for return address. Unnecessary but free.
 	    This is just paranoia to help backtracing not go awry. */
-	 ST sp, zero
+	 st sp, zero
 	}
 	{
 	 /* Zero out our frame pointer for __libc_start_main. */
-	 ST r12, zero
+	 st r12, zero
 
 	 /* Zero out lr to make __libc_start_main the end of backtrace.  */
 	 move lr, zero
diff --git a/sysdeps/unix/sysv/linux/tile/clone.S b/sysdeps/unix/sysv/linux/tile/clone.S
index 9610acd..2f624e6 100644
--- a/sysdeps/unix/sysv/linux/tile/clone.S
+++ b/sysdeps/unix/sysv/linux/tile/clone.S
@@ -44,32 +44,32 @@ ENTRY (__clone)
 	/* Create a stack frame so we can pass callee-saves to new task. */
 	{
 	 move r10, sp
-	 ST sp, lr
+	 st sp, lr
 	 ADDI_PTR sp, sp, -FRAME_SIZE
 	}
 	cfi_offset (lr, 0)
 	cfi_def_cfa_offset (FRAME_SIZE)
 	ADDI_PTR r11, sp, FRAME_SP
 	{
-	 ST r11, r10
+	 st r11, r10
 	 ADDI_PTR r11, sp, FRAME_R30
 	}
 	{
-	 ST r11, r30
+	 st r11, r30
 	 ADDI_PTR r11, sp, FRAME_R31
 	}
 	cfi_offset (r30, FRAME_R30 - FRAME_SIZE)
 	{
-	 ST r11, r31
+	 st r11, r31
 	 ADDI_PTR r11, sp, FRAME_R32
 	}
 	cfi_offset (r31, FRAME_R31 - FRAME_SIZE)
-	ST r11, r32
+	st r11, r32
 	cfi_offset (r32, FRAME_R32 - FRAME_SIZE)
 
 	/* sanity check arguments */
-	BEQZ r0, .Linvalid
-	BEQZ r1, .Linvalid
+	beqz r0, .Linvalid
+	beqz r1, .Linvalid
 
 	/* Make sure child stack is properly aligned, and set up the
 	   top frame so that we can call out of it immediately in the
@@ -79,7 +79,7 @@ ENTRY (__clone)
 	ADDI_PTR r1, r1, -C_ABI_SAVE_AREA_SIZE
 	andi r1, r1, -C_ABI_SAVE_AREA_SIZE
 	ADDI_PTR r9, r1, REGSIZE /* sp of this frame on entry, i.e. zero */
-	ST r9, zero
+	st r9, zero
 
 	/* We need to switch the argument convention around from
 	   libc to kernel:
@@ -118,30 +118,30 @@ ENTRY (__clone)
 	 moveli TREG_SYSCALL_NR_NAME, __NR_clone
 	}
 	swint1
-	BEQZ r0, .Lthread_start  /* If in child task.  */
+	beqz r0, .Lthread_start  /* If in child task.  */
 
 .Ldone:
 	/* Restore the callee-saved registers and return. */
 	ADDLI_PTR lr, sp, FRAME_SIZE
 	{
-	 LD lr, lr
+	 ld lr, lr
 	 ADDLI_PTR r30, sp, FRAME_R30
 	}
 	{
-	 LD r30, r30
+	 ld r30, r30
 	 ADDLI_PTR r31, sp, FRAME_R31
 	}
 	{
-	 LD r31, r31
+	 ld r31, r31
 	 ADDLI_PTR r32, sp, FRAME_R32
 	}
 	{
-	 LD r32, r32
+	 ld r32, r32
 	 ADDI_PTR sp, sp, FRAME_SIZE
 	}
 	cfi_def_cfa_offset (0)
 
-	BNEZ r1, .Lerror
+	bnez r1, .Lerror
 	jrp lr
 
 .Lerror:
diff --git a/sysdeps/unix/sysv/linux/tile/getcontext.S b/sysdeps/unix/sysv/linux/tile/getcontext.S
index e7561ea..1a346cf 100644
--- a/sysdeps/unix/sysv/linux/tile/getcontext.S
+++ b/sysdeps/unix/sysv/linux/tile/getcontext.S
@@ -33,38 +33,38 @@ ENTRY (__getcontext)
 	   Save value "1" to uc_flags to later recognize getcontext().  */
 	{ movei r11, 1; ADDI_PTR r10, r0, UC_FLAGS_OFFSET }
 	{ ST_PTR r10, r11; addli r10, r0, UC_REG(30) }
-	{ ST r10, r30; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r31; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r32; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r33; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r34; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r35; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r36; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r37; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r38; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r39; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r40; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r41; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r42; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r43; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r44; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r45; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r46; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r47; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r48; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r49; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r50; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r51; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, r52; ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, tp;  ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, sp;  ADDI_PTR r10, r10, REGSIZE }
-	{ ST r10, lr;  ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r30; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r31; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r32; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r33; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r34; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r35; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r36; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r37; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r38; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r39; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r40; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r41; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r42; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r43; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r44; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r45; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r46; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r47; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r48; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r49; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r50; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r51; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r52; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, tp;  ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, sp;  ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, lr;  ADDI_PTR r10, r10, REGSIZE }
 	lnk r11   /* Point PC at the "jrp lr" instruction.  */
 	addli r11, r11, .Lreturn - .
-	{ ST r10, r11; ADDI_PTR r10, r10, REGSIZE }
+	{ st r10, r11; ADDI_PTR r10, r10, REGSIZE }
 	mfspr r11, INTERRUPT_CRITICAL_SECTION
 	{
-	 ST r10, r11
+	 st r10, r11
 	 movei r1, 0
 	}
 
@@ -78,7 +78,7 @@ ENTRY (__getcontext)
 	 moveli TREG_SYSCALL_NR_NAME, __NR_rt_sigprocmask
 	}
 	swint1
-	BNEZ r1, .Lsyscall_error
+	bnez r1, .Lsyscall_error
 
 .Lreturn:
 	{
diff --git a/sysdeps/unix/sysv/linux/tile/ioctl.S b/sysdeps/unix/sysv/linux/tile/ioctl.S
index 43f9563..9816c18 100644
--- a/sysdeps/unix/sysv/linux/tile/ioctl.S
+++ b/sysdeps/unix/sysv/linux/tile/ioctl.S
@@ -35,7 +35,7 @@ ENTRY (__ioctl)
 	 moveli TREG_SYSCALL_NR_NAME, __NR_ioctl
 	}
 	swint1
-	BNEZ r1, 0f
+	bnez r1, 0f
 	jrp lr
 PSEUDO_END (__ioctl)
 libc_hidden_def (__ioctl)
diff --git a/sysdeps/unix/sysv/linux/tile/setcontext.S b/sysdeps/unix/sysv/linux/tile/setcontext.S
index 8039e7e..2b60c3c 100644
--- a/sysdeps/unix/sysv/linux/tile/setcontext.S
+++ b/sysdeps/unix/sysv/linux/tile/setcontext.S
@@ -39,15 +39,15 @@ ENTRY (__setcontext)
 #endif
 	LD_PTR r10, r0
 	{
-	 BEQZ r10, .Lsigreturn
+	 beqz r10, .Lsigreturn
 	 addi r10, r10, -1  /* Confirm that it has value "1".  */
 	}
-	BNEZ r10, .Lbadcontext
+	bnez r10, .Lbadcontext
 
 	/* Save lr and r0 briefly on the stack and set the signal mask:
 	   rt_sigprocmask (SIG_SETMASK, &ucp->uc_sigmask, NULL, _NSIG / 8).  */
 	{
-	 ST sp, lr
+	 st sp, lr
 	 ADDI_PTR r11, sp, -(2 * REGSIZE)
 	 move r10, sp
 	}
@@ -55,11 +55,11 @@ ENTRY (__setcontext)
 	cfi_def_cfa_offset (3 * REGSIZE)
 	cfi_offset (lr, 0)
 	{
-	 ST r11, r10
+	 st r11, r10
 	 ADDI_PTR r10, sp, (2 * REGSIZE)
 	}
 	{
-	 ST r10, r0
+	 st r10, r0
 	 ADDLI_PTR r1, r0, UC_SIGMASK_OFFSET
 	}
 	cfi_offset (r0, -REGSIZE)
@@ -74,62 +74,62 @@ ENTRY (__setcontext)
 	swint1
 	ADDI_PTR r11, sp, 2 * REGSIZE  /* Restore uc_context to r11. */
 	{
-	 LD r11, r11
+	 ld r11, r11
 	 ADDI_PTR sp, sp, 3 * REGSIZE
 	}
 	cfi_def_cfa_offset (0)
-	LD lr, sp
+	ld lr, sp
 	{
 	 ADDI_PTR r10, r11, UC_REG(0)
-	 BNEZ r1, .Lsyscall_error
+	 bnez r1, .Lsyscall_error
 	}
 
 	/* Restore the argument registers; note they will be random
 	   unless makecontext() has been called.  */
-	{ LD r0, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r1, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r2, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r3, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r4, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r5, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r6, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r7, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r8, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r9, r10; ADDLI_PTR r10, r10, UC_REG(30) - UC_REG(9) }
+	{ ld r0, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r1, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r2, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r3, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r4, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r5, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r6, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r7, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r8, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r9, r10; ADDLI_PTR r10, r10, UC_REG(30) - UC_REG(9) }
 
 	/* Restore the callee-saved GPRs.  */
-	{ LD r30, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r31, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r32, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r33, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r34, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r35, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r36, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r37, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r38, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r39, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r40, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r41, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r42, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r43, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r44, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r45, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r46, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r47, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r48, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r49, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r50, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r51, r10; ADDI_PTR r10, r10, REGSIZE }
-	{ LD r52, r10; ADDI_PTR r10, r10, REGSIZE * 2 }
+	{ ld r30, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r31, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r32, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r33, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r34, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r35, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r36, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r37, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r38, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r39, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r40, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r41, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r42, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r43, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r44, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r45, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r46, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r47, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r48, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r49, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r50, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r51, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld r52, r10; ADDI_PTR r10, r10, REGSIZE * 2 }
 	/* Skip tp since it must not change for a given thread.  */
-	{ LD sp, r10;  ADDI_PTR r10, r10, REGSIZE }
-	{ LD lr, r10;  ADDI_PTR r10, r10, REGSIZE }
-	{ LD r11, r10; ADDI_PTR r10, r10, REGSIZE }
+	{ ld sp, r10;  ADDI_PTR r10, r10, REGSIZE }
+	{ ld lr, r10;  ADDI_PTR r10, r10, REGSIZE }
+	{ ld r11, r10; ADDI_PTR r10, r10, REGSIZE }
 
 	/* Construct an iret context; we set ICS so we can validly load
 	   EX_CONTEXT for iret without being interrupted halfway through.  */
 	{
-	 LD r12, r10
+	 ld r12, r10
 	 movei r13, 1
 	}
 	{
@@ -157,15 +157,15 @@ ENTRY (__setcontext)
 	cfi_def_cfa_offset (C_ABI_SAVE_AREA_SIZE + SI_MAX_SIZE + UC_SIZE)
 	moveli r2, UC_SIZE / REGSIZE
 0:      {
-	 LD r10, r0
+	 ld r10, r0
 	 ADDI_PTR r0, r0, REGSIZE
 	}
 	{
-	 ST r1, r10
+	 st r1, r10
 	 ADDI_PTR r1, r1, REGSIZE
 	 addi r2, r2, -1
 	}
-	BNEZ r2, 0b
+	bnez r2, 0b
 	moveli TREG_SYSCALL_NR_NAME, __NR_rt_sigreturn
 	swint1
 
@@ -193,7 +193,7 @@ ENTRY (__startcontext)
 	cfi_undefined (lr)
 	FEEDBACK_ENTER(__startcontext)
 	jalr r31
-	BEQZ r30, 1f
+	beqz r30, 1f
 	{
 	 move r0, r30
 	 jal __setcontext
diff --git a/sysdeps/unix/sysv/linux/tile/swapcontext.S b/sysdeps/unix/sysv/linux/tile/swapcontext.S
index 1778dfa..a955ca1 100644
--- a/sysdeps/unix/sysv/linux/tile/swapcontext.S
+++ b/sysdeps/unix/sysv/linux/tile/swapcontext.S
@@ -27,7 +27,7 @@ ENTRY (__swapcontext)
 	FEEDBACK_ENTER(__swapcontext)
 	/* Set up a frame and save r0 and r1.  */
 	{
-	 ST sp, lr
+	 st sp, lr
 	 ADDI_PTR r11, sp, -(3 * REGSIZE)
 	 move r10, sp
 	}
@@ -35,43 +35,43 @@ ENTRY (__swapcontext)
 	cfi_def_cfa_offset (4 * REGSIZE)
 	cfi_offset (lr, 0)
 	{
-	 ST r11, r10
+	 st r11, r10
 	 ADDI_PTR r10, sp, (2 * REGSIZE)
 	}
 	{
-	 ST r10, r0
+	 st r10, r0
 	 ADDI_PTR r10, sp, (3 * REGSIZE)
 	}
-	ST r10, r1
+	st r10, r1
 
 	/* Save the current context.  */
 	jal __getcontext
 
 	/* Tear down the frame and restore r0, r1, and lr. */
 	{
-	 BNEZ r0, .Lerror
+	 bnez r0, .Lerror
 	 ADDI_PTR r1, sp, 3 * REGSIZE
 	}
 	{
-	 LD r1, r1
+	 ld r1, r1
 	 ADDI_PTR r0, sp, 2 * REGSIZE
 	}
 	{
-	 LD r0, r0
+	 ld r0, r0
 	 ADDI_PTR sp, sp, 4 * REGSIZE
 	}
 	cfi_def_cfa_offset (0)
 	{
-	 LD lr, sp
+	 ld lr, sp
 	 ADDLI_PTR r10, r0, UC_REG(54)
 	}
 
 	/* Update the stored sp and lr.  */
 	{
-	 ST r10, sp
+	 st r10, sp
 	 ADDLI_PTR r10, r0, UC_REG(55)
 	}
-	ST r10, lr
+	st r10, lr
 
 	/* Tail-call setcontext to finish up.  */
 	{
@@ -82,7 +82,7 @@ ENTRY (__swapcontext)
 .Lerror:
 	ADDI_PTR sp, sp, 4 * REGSIZE
 	cfi_def_cfa_offset (0)
-	LD lr, sp
+	ld lr, sp
 	jrp lr
 END (__swapcontext)
 
diff --git a/sysdeps/unix/sysv/linux/tile/syscall.S b/sysdeps/unix/sysv/linux/tile/syscall.S
index 627ab0e..3aa0a2b 100644
--- a/sysdeps/unix/sysv/linux/tile/syscall.S
+++ b/sysdeps/unix/sysv/linux/tile/syscall.S
@@ -27,6 +27,6 @@ ENTRY (syscall)
 	{ move r3, r4; move r4, r5 }
 	{ move r5, r6; move r6, r7 }
 	swint1
-	BNEZ r1, 0f
+	bnez r1, 0f
 	jrp lr
 PSEUDO_END (syscall)
diff --git a/sysdeps/unix/sysv/linux/tile/vfork.S b/sysdeps/unix/sysv/linux/tile/vfork.S
index 725bd4b..1f4885f 100644
--- a/sysdeps/unix/sysv/linux/tile/vfork.S
+++ b/sysdeps/unix/sysv/linux/tile/vfork.S
@@ -40,7 +40,7 @@ ENTRY (__vfork)
 	moveli TREG_SYSCALL_NR_NAME, __NR_clone
 	swint1
 
-	BNEZ r1, 0f
+	bnez r1, 0f
 	jrp lr
 PSEUDO_END (__vfork)
 libc_hidden_def (__vfork)
