@@ -720,7 +720,7 @@ static int edid_read(struct anx7625_data *ctx,
ret = sp_tx_aux_rd(ctx, 0xf1);
if (ret) {
- sp_tx_rst_aux(ctx);
+ ret = sp_tx_rst_aux(ctx);
DRM_DEV_DEBUG_DRIVER(dev, "edid read fail, reset!\n");
} else {
ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
@@ -735,7 +735,7 @@ static int edid_read(struct anx7625_data *ctx,
if (cnt > EDID_TRY_CNT)
return -EIO;
- return 0;
+ return ret;
}
static int segments_edid_read(struct anx7625_data *ctx,
@@ -785,7 +785,7 @@ static int segments_edid_read(struct anx7625_data *ctx,
if (cnt > EDID_TRY_CNT)
return -EIO;
- return 0;
+ return ret;
}
static int sp_tx_edid_read(struct anx7625_data *ctx,
@@ -887,7 +887,11 @@ static int sp_tx_edid_read(struct anx7625_data *ctx,
}
/* Reset aux channel */
- sp_tx_rst_aux(ctx);
+ ret = sp_tx_rst_aux(ctx);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "Failed to reset aux channel!\n");
+ return ret;
+ }
return (blocks_num + 1);
}
The return value of sp_tx_rst_aux() is not propagated, which means both compiler warnings and potential errors not being handled. Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> --- Changes since v1: - Instead of discarding the error, propagate it until it is handled properly drivers/gpu/drm/bridge/analogix/anx7625.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) -- 2.30.2