From patchwork Sat Mar 27 11:02:45 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 410174 Delivered-To: patch@linaro.org Received: by 2002:a02:8562:0:0:0:0:0 with SMTP id g89csp2279322jai; Sat, 27 Mar 2021 07:18:00 -0700 (PDT) X-Google-Smtp-Source: ABdhPJxUD0Ma43ileuUvxdHs4dDfThuaGsRIg/0rmi2fH1C5utzpSsV74Fv4qjXXDBn/d5SaZCaa X-Received: by 2002:a62:7594:0:b029:203:2d6c:cea1 with SMTP id q142-20020a6275940000b02902032d6ccea1mr17962342pfc.33.1616854680031; Sat, 27 Mar 2021 07:18:00 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1616854680; cv=none; d=google.com; s=arc-20160816; b=dJrFOH0t17/gL+Ut3oNzIAervB9J8Qz2QghRZrTh/FHFM0CpTTBkbc1LuL742/odOE EVoVTXdIuWKJ534vB2SmxF66u+ZdSIeezIlPaI+WwnuB4wxoLcqoGmZdthqdDlbLLDGv QffJ/dE/qMm6LJORu9TdtvgZrr+X7zERVnthDdVICFAk/39q3L10nQezd9SjheCa7lph sbysmqjsWxFZYmitbL71hcJtUb4pQzUk3pDas3Bxq7K54z9RTmh8xRTUgVRbtk6YpQ9M ECRe78qaiqUVzmYwcor1JIO/joecXxQZ5rNP5Cp3FQnuvJ+4UarWGMTWp+ttIABqa9qu q78Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:content-transfer-encoding:cc:list-subscribe :list-help:list-post:list-archive:list-unsubscribe:list-id :precedence:mime-version:references:in-reply-to:message-id:date :subject:to:from:dkim-signature:delivered-to; bh=veklmprrCvmBvWS6b9kQGHhBhpyMhIE4FJunPKxuMmk=; b=Hh/KdiPL+/WGsbdcpltpQmgmjShiateTY96t8JCBdhVK7EbWiYpSI/VkMqOPpHI3TI /orRcqKYNy5jpeWA6U8EpmtF0xT73vMqLnu6OhBFYyjcDH4gj4SE0JieTos95zWQWtpc 9qXVX/SbHWZC2qH3bcIq0JoVk88wOHEiRWz0smTVWdXTEQQ3mlecB1fx78Dddgpd8h1t d+N+f5g34tiywnho10O9pCjc+gqBX0lVBDgxnS79ULfUjvtFeSOZTUIOuhsgwVTdLobG I1ftYKHMj9xjFE92lb3KsNwWdvxH+Gz48gHwToZtKBNKmTi0nb9GmWWQ0LYZkgTZP607 PvAg== ARC-Authentication-Results: i=1; mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=NRlEzi4R; spf=pass (google.com: best guess record for domain of dri-devel-bounces@lists.freedesktop.org designates 131.252.210.177 as permitted sender) smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from gabe.freedesktop.org (gabe.freedesktop.org. [131.252.210.177]) by mx.google.com with ESMTPS id o65si12824764pjo.70.2021.03.27.07.17.59 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 27 Mar 2021 07:17:59 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of dri-devel-bounces@lists.freedesktop.org designates 131.252.210.177 as permitted sender) client-ip=131.252.210.177; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=NRlEzi4R; spf=pass (google.com: best guess record for domain of dri-devel-bounces@lists.freedesktop.org designates 131.252.210.177 as permitted sender) smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 37D836E157; Sat, 27 Mar 2021 14:17:57 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from mail-lf1-x131.google.com (mail-lf1-x131.google.com [IPv6:2a00:1450:4864:20::131]) by gabe.freedesktop.org (Postfix) with ESMTPS id E3E4A6F527 for ; Sat, 27 Mar 2021 11:03:17 +0000 (UTC) Received: by mail-lf1-x131.google.com with SMTP id o126so11560854lfa.0 for ; Sat, 27 Mar 2021 04:03:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=7L1y9407+TA3E7WMJt6VaJe+1tD9e8PVCS7dUfGesbk=; b=NRlEzi4Rc+x+EI97c8jAIITif+Qe91dSdlRYnwGKrq5AoFdp7fwM4MPwe4+MCk7IOp t6M+SrsYagUdQ3rHrM/2UssSgNvUDeq0UbdYwLhKl3puHOPxv1bA2ypIVNO1o0V0ePwN y1bRAVE/pdKrXdPWrEEJcYv4a7fEgqsflGlpzakfbWiA1PAGczJUzB2Bn7qhsf6lT1VZ n3iUBNczlNfiIiCeu0ZzVzEQwHlr+YtuKIn+6C05HNg3kibCJQf/qzjOXeM/N7kEozz5 o2ZidTk4v/UPTS08QzkACJ7ZpBGLyru6gRWhL5eMiYAqSvliKtADNI+C/fS+/cp89Gdh yv8g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=7L1y9407+TA3E7WMJt6VaJe+1tD9e8PVCS7dUfGesbk=; b=ltTC9a9mVSbaM4UA1DvO3znlMeWJMLXQY23881hlsWFDlGqksZshiWzdIGdFijoE0f 1vFK8iD0A43cGDDKBFjT6DNBl67Rm4z+Uqfdsp3znjd1RhxCQ7Z5YETIjPsJSEkzo0vr rJnwlarb7AYwtBk/LpHX1hUlPdzUXTFO9DYshA7wevmWDOZKb5xpU/za1SEi7UD4iw8f 1qF/K7saet/ePpY8LKA/OMZmNqbNeMaJNNyBtKaIhmuf62dlltVu8aw+NqXTZPbbBIFW TbQJCz/zNerT6CecoRkyi3CIjkK9u0w/ghqCLdGIN4rpkoedU4t8fvEL1M15jzdJZZV5 qj1g== X-Gm-Message-State: AOAM5303Ob19YBOYR2YpaqeY2g0T7mJLxwWAo8Ka2VHFahhj5uXb8VQ2 zOVPWiyR/oq/4TToOSkuM9FGVg== X-Received: by 2002:ac2:5dcf:: with SMTP id x15mr10624811lfq.176.1616842995608; Sat, 27 Mar 2021 04:03:15 -0700 (PDT) Received: from eriador.lan ([37.153.55.125]) by smtp.gmail.com with ESMTPSA id a8sm1513801ljn.96.2021.03.27.04.03.14 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 27 Mar 2021 04:03:14 -0700 (PDT) From: Dmitry Baryshkov To: Rob Clark , Sean Paul , Abhinav Kumar , Jonathan Marek , Michael Turquette Subject: [PATCH v3 05/25] drm/msm/dsi: fuse dsi_pll_* code into dsi_phy_* code Date: Sat, 27 Mar 2021 14:02:45 +0300 Message-Id: <20210327110305.3289784-6-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20210327110305.3289784-1-dmitry.baryshkov@linaro.org> References: <20210327110305.3289784-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 X-Mailman-Approved-At: Sat, 27 Mar 2021 14:17:56 +0000 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Stephen Boyd , linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org, David Airlie , freedreno@lists.freedesktop.org, linux-clk@vger.kernel.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Each phy version is tightly coupled with the corresponding PLL code, there is no need to keep them separate. Fuse source files together in order to simplify DSI code. Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar --- drivers/gpu/drm/msm/Makefile | 9 +- drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 873 +++++++++++++ drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 1089 ++++++++++++++++ drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 637 ++++++++++ .../gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 519 ++++++++ drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 905 ++++++++++++++ .../gpu/drm/msm/dsi/{pll => phy}/dsi_pll.c | 0 .../gpu/drm/msm/dsi/{pll => phy}/dsi_pll.h | 0 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 881 ------------- drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c | 1096 ----------------- drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 643 ---------- .../gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 526 -------- drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c | 913 -------------- 13 files changed, 4024 insertions(+), 4067 deletions(-) rename drivers/gpu/drm/msm/dsi/{pll => phy}/dsi_pll.c (100%) rename drivers/gpu/drm/msm/dsi/{pll => phy}/dsi_pll.h (100%) delete mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c delete mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c delete mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c delete mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c delete mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c -- 2.30.2 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile index 3cc906121fb3..1be6996b80b7 100644 --- a/drivers/gpu/drm/msm/Makefile +++ b/drivers/gpu/drm/msm/Makefile @@ -136,13 +136,6 @@ msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/phy/dsi_phy_14nm.o msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/phy/dsi_phy_10nm.o msm-$(CONFIG_DRM_MSM_DSI_7NM_PHY) += dsi/phy/dsi_phy_7nm.o -ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y) -msm-y += dsi/pll/dsi_pll.o -msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o -msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o -msm-$(CONFIG_DRM_MSM_DSI_14NM_PHY) += dsi/pll/dsi_pll_14nm.o -msm-$(CONFIG_DRM_MSM_DSI_10NM_PHY) += dsi/pll/dsi_pll_10nm.o -msm-$(CONFIG_DRM_MSM_DSI_7NM_PHY) += dsi/pll/dsi_pll_7nm.o -endif +msm-$(CONFIG_DRM_MSM_DSI_PLL) += dsi/phy/dsi_pll.o obj-$(CONFIG_DRM_MSM) += msm.o diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c index 655fa17a0452..5da369b5c475 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c @@ -3,11 +3,884 @@ * Copyright (c) 2018, The Linux Foundation */ +#include +#include #include +#include "dsi_pll.h" #include "dsi_phy.h" #include "dsi.xml.h" +/* + * DSI PLL 10nm - clock diagram (eg: DSI0): + * + * dsi0_pll_out_div_clk dsi0_pll_bit_clk + * | | + * | | + * +---------+ | +----------+ | +----+ + * dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0_phy_pll_out_byteclk + * +---------+ | +----------+ | +----+ + * | | + * | | dsi0_pll_by_2_bit_clk + * | | | + * | | +----+ | |\ dsi0_pclk_mux + * | |--| /2 |--o--| \ | + * | | +----+ | \ | +---------+ + * | --------------| |--o--| div_7_4 |-- dsi0_phy_pll_out_dsiclk + * |------------------------------| / +---------+ + * | +-----+ | / + * -----------| /4? |--o----------|/ + * +-----+ | | + * | |dsiclk_sel + * | + * dsi0_pll_post_out_div_clk + */ + +#define DSI_BYTE_PLL_CLK 0 +#define DSI_PIXEL_PLL_CLK 1 +#define NUM_PROVIDED_CLKS 2 + +#define VCO_REF_CLK_RATE 19200000 + +struct dsi_pll_regs { + u32 pll_prop_gain_rate; + u32 pll_lockdet_rate; + u32 decimal_div_start; + u32 frac_div_start_low; + u32 frac_div_start_mid; + u32 frac_div_start_high; + u32 pll_clock_inverters; + u32 ssc_stepsize_low; + u32 ssc_stepsize_high; + u32 ssc_div_per_low; + u32 ssc_div_per_high; + u32 ssc_adjper_low; + u32 ssc_adjper_high; + u32 ssc_control; +}; + +struct dsi_pll_config { + u32 ref_freq; + bool div_override; + u32 output_div; + bool ignore_frac; + bool disable_prescaler; + bool enable_ssc; + bool ssc_center; + u32 dec_bits; + u32 frac_bits; + u32 lock_timer; + u32 ssc_freq; + u32 ssc_offset; + u32 ssc_adj_per; + u32 thresh_cycles; + u32 refclk_cycles; +}; + +struct pll_10nm_cached_state { + unsigned long vco_rate; + u8 bit_clk_div; + u8 pix_clk_div; + u8 pll_out_div; + u8 pll_mux; +}; + +struct dsi_pll_10nm { + struct msm_dsi_pll base; + + int id; + struct platform_device *pdev; + + void __iomem *phy_cmn_mmio; + void __iomem *mmio; + + u64 vco_ref_clk_rate; + u64 vco_current_rate; + + /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */ + spinlock_t postdiv_lock; + + int vco_delay; + struct dsi_pll_config pll_configuration; + struct dsi_pll_regs reg_setup; + + /* private clocks: */ + struct clk_hw *out_div_clk_hw; + struct clk_hw *bit_clk_hw; + struct clk_hw *byte_clk_hw; + struct clk_hw *by_2_bit_clk_hw; + struct clk_hw *post_out_div_clk_hw; + struct clk_hw *pclk_mux_hw; + struct clk_hw *out_dsiclk_hw; + + /* clock-provider: */ + struct clk_hw_onecell_data *hw_data; + + struct pll_10nm_cached_state cached_state; + + enum msm_dsi_phy_usecase uc; + struct dsi_pll_10nm *slave; +}; + +#define to_pll_10nm(x) container_of(x, struct dsi_pll_10nm, base) + +/* + * Global list of private DSI PLL struct pointers. We need this for Dual DSI + * mode, where the master PLL's clk_ops needs access the slave's private data + */ +static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX]; + +static void dsi_pll_setup_config(struct dsi_pll_10nm *pll) +{ + struct dsi_pll_config *config = &pll->pll_configuration; + + config->ref_freq = pll->vco_ref_clk_rate; + config->output_div = 1; + config->dec_bits = 8; + config->frac_bits = 18; + config->lock_timer = 64; + config->ssc_freq = 31500; + config->ssc_offset = 5000; + config->ssc_adj_per = 2; + config->thresh_cycles = 32; + config->refclk_cycles = 256; + + config->div_override = false; + config->ignore_frac = false; + config->disable_prescaler = false; + + config->enable_ssc = false; + config->ssc_center = 0; +} + +static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll) +{ + struct dsi_pll_config *config = &pll->pll_configuration; + struct dsi_pll_regs *regs = &pll->reg_setup; + u64 fref = pll->vco_ref_clk_rate; + u64 pll_freq; + u64 divider; + u64 dec, dec_multiple; + u32 frac; + u64 multiplier; + + pll_freq = pll->vco_current_rate; + + if (config->disable_prescaler) + divider = fref; + else + divider = fref * 2; + + multiplier = 1 << config->frac_bits; + dec_multiple = div_u64(pll_freq * multiplier, divider); + dec = div_u64_rem(dec_multiple, multiplier, &frac); + + if (pll_freq <= 1900000000UL) + regs->pll_prop_gain_rate = 8; + else if (pll_freq <= 3000000000UL) + regs->pll_prop_gain_rate = 10; + else + regs->pll_prop_gain_rate = 12; + if (pll_freq < 1100000000UL) + regs->pll_clock_inverters = 8; + else + regs->pll_clock_inverters = 0; + + regs->pll_lockdet_rate = config->lock_timer; + regs->decimal_div_start = dec; + regs->frac_div_start_low = (frac & 0xff); + regs->frac_div_start_mid = (frac & 0xff00) >> 8; + regs->frac_div_start_high = (frac & 0x30000) >> 16; +} + +#define SSC_CENTER BIT(0) +#define SSC_EN BIT(1) + +static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) +{ + struct dsi_pll_config *config = &pll->pll_configuration; + struct dsi_pll_regs *regs = &pll->reg_setup; + u32 ssc_per; + u32 ssc_mod; + u64 ssc_step_size; + u64 frac; + + if (!config->enable_ssc) { + DBG("SSC not enabled\n"); + return; + } + + ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; + ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); + ssc_per -= ssc_mod; + + frac = regs->frac_div_start_low | + (regs->frac_div_start_mid << 8) | + (regs->frac_div_start_high << 16); + ssc_step_size = regs->decimal_div_start; + ssc_step_size *= (1 << config->frac_bits); + ssc_step_size += frac; + ssc_step_size *= config->ssc_offset; + ssc_step_size *= (config->ssc_adj_per + 1); + ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); + ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); + + regs->ssc_div_per_low = ssc_per & 0xFF; + regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; + regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); + regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); + regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; + regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; + + regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; + + pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", + regs->decimal_div_start, frac, config->frac_bits); + pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", + ssc_per, (u32)ssc_step_size, config->ssc_adj_per); +} + +static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll) +{ + void __iomem *base = pll->mmio; + struct dsi_pll_regs *regs = &pll->reg_setup; + + if (pll->pll_configuration.enable_ssc) { + pr_debug("SSC is enabled\n"); + + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1, + regs->ssc_stepsize_low); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, + regs->ssc_stepsize_high); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1, + regs->ssc_div_per_low); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1, + regs->ssc_div_per_high); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1, + regs->ssc_adjper_low); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1, + regs->ssc_adjper_high); + pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL, + SSC_EN | regs->ssc_control); + } +} + +static void dsi_pll_config_hzindep_reg(struct dsi_pll_10nm *pll) +{ + void __iomem *base = pll->mmio; + + pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_ONE, 0x80); + pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03); + pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00); + pll_write(base + REG_DSI_10nm_PHY_PLL_DSM_DIVIDER, 0x00); + pll_write(base + REG_DSI_10nm_PHY_PLL_FEEDBACK_DIVIDER, 0x4e); + pll_write(base + REG_DSI_10nm_PHY_PLL_CALIBRATION_SETTINGS, 0x40); + pll_write(base + REG_DSI_10nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE, + 0xba); + pll_write(base + REG_DSI_10nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE, 0x0c); + pll_write(base + REG_DSI_10nm_PHY_PLL_OUTDIV, 0x00); + pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_OVERRIDE, 0x00); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO, 0x08); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_PROP_GAIN_RATE_1, 0x08); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_BAND_SET_RATE_1, 0xc0); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0xfa); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1, + 0x4c); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_OVERRIDE, 0x80); + pll_write(base + REG_DSI_10nm_PHY_PLL_PFILT, 0x29); + pll_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f); +} + +static void dsi_pll_commit(struct dsi_pll_10nm *pll) +{ + void __iomem *base = pll->mmio; + struct dsi_pll_regs *reg = &pll->reg_setup; + + pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); + pll_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1, + reg->decimal_div_start); + pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1, + reg->frac_div_start_low); + pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1, + reg->frac_div_start_mid); + pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1, + reg->frac_div_start_high); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, + reg->pll_lockdet_rate); + pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); + pll_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10); + pll_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS, + reg->pll_clock_inverters); +} + +static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + + DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->id, rate, + parent_rate); + + pll_10nm->vco_current_rate = rate; + pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; + + dsi_pll_setup_config(pll_10nm); + + dsi_pll_calc_dec_frac(pll_10nm); + + dsi_pll_calc_ssc(pll_10nm); + + dsi_pll_commit(pll_10nm); + + dsi_pll_config_hzindep_reg(pll_10nm); + + dsi_pll_ssc_commit(pll_10nm); + + /* flush, ensure all register writes are done*/ + wmb(); + + return 0; +} + +static int dsi_pll_10nm_lock_status(struct dsi_pll_10nm *pll) +{ + struct device *dev = &pll->pdev->dev; + int rc; + u32 status = 0; + u32 const delay_us = 100; + u32 const timeout_us = 5000; + + rc = readl_poll_timeout_atomic(pll->mmio + + REG_DSI_10nm_PHY_PLL_COMMON_STATUS_ONE, + status, + ((status & BIT(0)) > 0), + delay_us, + timeout_us); + if (rc) + DRM_DEV_ERROR(dev, "DSI PLL(%d) lock failed, status=0x%08x\n", + pll->id, status); + + return rc; +} + +static void dsi_pll_disable_pll_bias(struct dsi_pll_10nm *pll) +{ + u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0); + + pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0); + pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0, + data & ~BIT(5)); + ndelay(250); +} + +static void dsi_pll_enable_pll_bias(struct dsi_pll_10nm *pll) +{ + u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0); + + pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0, + data | BIT(5)); + pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0xc0); + ndelay(250); +} + +static void dsi_pll_disable_global_clk(struct dsi_pll_10nm *pll) +{ + u32 data; + + data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1); + pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1, + data & ~BIT(5)); +} + +static void dsi_pll_enable_global_clk(struct dsi_pll_10nm *pll) +{ + u32 data; + + data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1); + pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1, + data | BIT(5)); +} + +static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + struct device *dev = &pll_10nm->pdev->dev; + int rc; + + dsi_pll_enable_pll_bias(pll_10nm); + if (pll_10nm->slave) + dsi_pll_enable_pll_bias(pll_10nm->slave); + + rc = dsi_pll_10nm_vco_set_rate(hw,pll_10nm->vco_current_rate, 0); + if (rc) { + DRM_DEV_ERROR(dev, "vco_set_rate failed, rc=%d\n", rc); + return rc; + } + + /* Start PLL */ + pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, + 0x01); + + /* + * ensure all PLL configurations are written prior to checking + * for PLL lock. + */ + wmb(); + + /* Check for PLL lock */ + rc = dsi_pll_10nm_lock_status(pll_10nm); + if (rc) { + DRM_DEV_ERROR(dev, "PLL(%d) lock failed\n", pll_10nm->id); + goto error; + } + + pll->pll_on = true; + + dsi_pll_enable_global_clk(pll_10nm); + if (pll_10nm->slave) + dsi_pll_enable_global_clk(pll_10nm->slave); + + pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, + 0x01); + if (pll_10nm->slave) + pll_write(pll_10nm->slave->phy_cmn_mmio + + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0x01); + +error: + return rc; +} + +static void dsi_pll_disable_sub(struct dsi_pll_10nm *pll) +{ + pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0); + dsi_pll_disable_pll_bias(pll); +} + +static void dsi_pll_10nm_vco_unprepare(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + + /* + * To avoid any stray glitches while abruptly powering down the PLL + * make sure to gate the clock using the clock enable bit before + * powering down the PLL + */ + dsi_pll_disable_global_clk(pll_10nm); + pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0); + dsi_pll_disable_sub(pll_10nm); + if (pll_10nm->slave) { + dsi_pll_disable_global_clk(pll_10nm->slave); + dsi_pll_disable_sub(pll_10nm->slave); + } + /* flush, ensure all register writes are done */ + wmb(); + pll->pll_on = false; +} + +static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + struct dsi_pll_config *config = &pll_10nm->pll_configuration; + void __iomem *base = pll_10nm->mmio; + u64 ref_clk = pll_10nm->vco_ref_clk_rate; + u64 vco_rate = 0x0; + u64 multiplier; + u32 frac; + u32 dec; + u64 pll_freq, tmp64; + + dec = pll_read(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1); + dec &= 0xff; + + frac = pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1); + frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1) & + 0xff) << 8); + frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1) & + 0x3) << 16); + + /* + * TODO: + * 1. Assumes prescaler is disabled + */ + multiplier = 1 << config->frac_bits; + pll_freq = dec * (ref_clk * 2); + tmp64 = (ref_clk * 2 * frac); + pll_freq += div_u64(tmp64, multiplier); + + vco_rate = pll_freq; + + DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x", + pll_10nm->id, (unsigned long)vco_rate, dec, frac); + + return (unsigned long)vco_rate; +} + +static const struct clk_ops clk_ops_dsi_pll_10nm_vco = { + .round_rate = msm_dsi_pll_helper_clk_round_rate, + .set_rate = dsi_pll_10nm_vco_set_rate, + .recalc_rate = dsi_pll_10nm_vco_recalc_rate, + .prepare = dsi_pll_10nm_vco_prepare, + .unprepare = dsi_pll_10nm_vco_unprepare, +}; + +/* + * PLL Callbacks + */ + +static void dsi_pll_10nm_save_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + struct pll_10nm_cached_state *cached = &pll_10nm->cached_state; + void __iomem *phy_base = pll_10nm->phy_cmn_mmio; + u32 cmn_clk_cfg0, cmn_clk_cfg1; + + cached->pll_out_div = pll_read(pll_10nm->mmio + + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE); + cached->pll_out_div &= 0x3; + + cmn_clk_cfg0 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0); + cached->bit_clk_div = cmn_clk_cfg0 & 0xf; + cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4; + + cmn_clk_cfg1 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1); + cached->pll_mux = cmn_clk_cfg1 & 0x3; + + DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x", + pll_10nm->id, cached->pll_out_div, cached->bit_clk_div, + cached->pix_clk_div, cached->pll_mux); +} + +static int dsi_pll_10nm_restore_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + struct pll_10nm_cached_state *cached = &pll_10nm->cached_state; + void __iomem *phy_base = pll_10nm->phy_cmn_mmio; + u32 val; + int ret; + + val = pll_read(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE); + val &= ~0x3; + val |= cached->pll_out_div; + pll_write(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE, val); + + pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0, + cached->bit_clk_div | (cached->pix_clk_div << 4)); + + val = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1); + val &= ~0x3; + val |= cached->pll_mux; + pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val); + + ret = dsi_pll_10nm_vco_set_rate(&pll->clk_hw, pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate); + if (ret) { + DRM_DEV_ERROR(&pll_10nm->pdev->dev, + "restore vco rate failed. ret=%d\n", ret); + return ret; + } + + DBG("DSI PLL%d", pll_10nm->id); + + return 0; +} + +static int dsi_pll_10nm_set_usecase(struct msm_dsi_pll *pll, + enum msm_dsi_phy_usecase uc) +{ + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + void __iomem *base = pll_10nm->phy_cmn_mmio; + u32 data = 0x0; /* internal PLL */ + + DBG("DSI PLL%d", pll_10nm->id); + + switch (uc) { + case MSM_DSI_PHY_STANDALONE: + break; + case MSM_DSI_PHY_MASTER: + pll_10nm->slave = pll_10nm_list[(pll_10nm->id + 1) % DSI_MAX]; + break; + case MSM_DSI_PHY_SLAVE: + data = 0x1; /* external PLL */ + break; + default: + return -EINVAL; + } + + /* set PLL src */ + pll_write(base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, (data << 2)); + + pll_10nm->uc = uc; + + return 0; +} + +static int dsi_pll_10nm_get_provider(struct msm_dsi_pll *pll, + struct clk **byte_clk_provider, + struct clk **pixel_clk_provider) +{ + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + struct clk_hw_onecell_data *hw_data = pll_10nm->hw_data; + + DBG("DSI PLL%d", pll_10nm->id); + + if (byte_clk_provider) + *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk; + if (pixel_clk_provider) + *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk; + + return 0; +} + +static void dsi_pll_10nm_destroy(struct msm_dsi_pll *pll) +{ + struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); + struct device *dev = &pll_10nm->pdev->dev; + + DBG("DSI PLL%d", pll_10nm->id); + of_clk_del_provider(dev->of_node); + + clk_hw_unregister_divider(pll_10nm->out_dsiclk_hw); + clk_hw_unregister_mux(pll_10nm->pclk_mux_hw); + clk_hw_unregister_fixed_factor(pll_10nm->post_out_div_clk_hw); + clk_hw_unregister_fixed_factor(pll_10nm->by_2_bit_clk_hw); + clk_hw_unregister_fixed_factor(pll_10nm->byte_clk_hw); + clk_hw_unregister_divider(pll_10nm->bit_clk_hw); + clk_hw_unregister_divider(pll_10nm->out_div_clk_hw); + clk_hw_unregister(&pll_10nm->base.clk_hw); +} + +/* + * The post dividers and mux clocks are created using the standard divider and + * mux API. Unlike the 14nm PHY, the slave PLL doesn't need its dividers/mux + * state to follow the master PLL's divider/mux state. Therefore, we don't + * require special clock ops that also configure the slave PLL registers + */ +static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm) +{ + char clk_name[32], parent[32], vco_name[32]; + char parent2[32], parent3[32], parent4[32]; + struct clk_init_data vco_init = { + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .name = vco_name, + .flags = CLK_IGNORE_UNUSED, + .ops = &clk_ops_dsi_pll_10nm_vco, + }; + struct device *dev = &pll_10nm->pdev->dev; + struct clk_hw_onecell_data *hw_data; + struct clk_hw *hw; + int ret; + + DBG("DSI%d", pll_10nm->id); + + hw_data = devm_kzalloc(dev, sizeof(*hw_data) + + NUM_PROVIDED_CLKS * sizeof(struct clk_hw *), + GFP_KERNEL); + if (!hw_data) + return -ENOMEM; + + snprintf(vco_name, 32, "dsi%dvco_clk", pll_10nm->id); + pll_10nm->base.clk_hw.init = &vco_init; + + ret = clk_hw_register(dev, &pll_10nm->base.clk_hw); + if (ret) + return ret; + + snprintf(clk_name, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); + snprintf(parent, 32, "dsi%dvco_clk", pll_10nm->id); + + hw = clk_hw_register_divider(dev, clk_name, + parent, CLK_SET_RATE_PARENT, + pll_10nm->mmio + + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE, + 0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_base_clk_hw; + } + + pll_10nm->out_div_clk_hw = hw; + + snprintf(clk_name, 32, "dsi%d_pll_bit_clk", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); + + /* BIT CLK: DIV_CTRL_3_0 */ + hw = clk_hw_register_divider(dev, clk_name, parent, + CLK_SET_RATE_PARENT, + pll_10nm->phy_cmn_mmio + + REG_DSI_10nm_PHY_CMN_CLK_CFG0, + 0, 4, CLK_DIVIDER_ONE_BASED, + &pll_10nm->postdiv_lock); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_out_div_clk_hw; + } + + pll_10nm->bit_clk_hw = hw; + + snprintf(clk_name, 32, "dsi%d_phy_pll_out_byteclk", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id); + + /* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */ + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, + CLK_SET_RATE_PARENT, 1, 8); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_bit_clk_hw; + } + + pll_10nm->byte_clk_hw = hw; + hw_data->hws[DSI_BYTE_PLL_CLK] = hw; + + snprintf(clk_name, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id); + + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, + 0, 1, 2); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_byte_clk_hw; + } + + pll_10nm->by_2_bit_clk_hw = hw; + + snprintf(clk_name, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); + + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, + 0, 1, 4); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_by_2_bit_clk_hw; + } + + pll_10nm->post_out_div_clk_hw = hw; + + snprintf(clk_name, 32, "dsi%d_pclk_mux", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id); + snprintf(parent2, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id); + snprintf(parent3, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); + snprintf(parent4, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id); + + hw = clk_hw_register_mux(dev, clk_name, + ((const char *[]){ + parent, parent2, parent3, parent4 + }), 4, 0, pll_10nm->phy_cmn_mmio + + REG_DSI_10nm_PHY_CMN_CLK_CFG1, + 0, 2, 0, NULL); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_post_out_div_clk_hw; + } + + pll_10nm->pclk_mux_hw = hw; + + snprintf(clk_name, 32, "dsi%d_phy_pll_out_dsiclk", pll_10nm->id); + snprintf(parent, 32, "dsi%d_pclk_mux", pll_10nm->id); + + /* PIX CLK DIV : DIV_CTRL_7_4*/ + hw = clk_hw_register_divider(dev, clk_name, parent, + 0, pll_10nm->phy_cmn_mmio + + REG_DSI_10nm_PHY_CMN_CLK_CFG0, + 4, 4, CLK_DIVIDER_ONE_BASED, + &pll_10nm->postdiv_lock); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_pclk_mux_hw; + } + + pll_10nm->out_dsiclk_hw = hw; + hw_data->hws[DSI_PIXEL_PLL_CLK] = hw; + + hw_data->num = NUM_PROVIDED_CLKS; + pll_10nm->hw_data = hw_data; + + ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, + pll_10nm->hw_data); + if (ret) { + DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret); + goto err_dsiclk_hw; + } + + return 0; + +err_dsiclk_hw: + clk_hw_unregister_divider(pll_10nm->out_dsiclk_hw); +err_pclk_mux_hw: + clk_hw_unregister_mux(pll_10nm->pclk_mux_hw); +err_post_out_div_clk_hw: + clk_hw_unregister_fixed_factor(pll_10nm->post_out_div_clk_hw); +err_by_2_bit_clk_hw: + clk_hw_unregister_fixed_factor(pll_10nm->by_2_bit_clk_hw); +err_byte_clk_hw: + clk_hw_unregister_fixed_factor(pll_10nm->byte_clk_hw); +err_bit_clk_hw: + clk_hw_unregister_divider(pll_10nm->bit_clk_hw); +err_out_div_clk_hw: + clk_hw_unregister_divider(pll_10nm->out_div_clk_hw); +err_base_clk_hw: + clk_hw_unregister(&pll_10nm->base.clk_hw); + + return ret; +} + +struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id) +{ + struct dsi_pll_10nm *pll_10nm; + struct msm_dsi_pll *pll; + int ret; + + pll_10nm = devm_kzalloc(&pdev->dev, sizeof(*pll_10nm), GFP_KERNEL); + if (!pll_10nm) + return ERR_PTR(-ENOMEM); + + DBG("DSI PLL%d", id); + + pll_10nm->pdev = pdev; + pll_10nm->id = id; + pll_10nm_list[id] = pll_10nm; + + pll_10nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY"); + if (IS_ERR_OR_NULL(pll_10nm->phy_cmn_mmio)) { + DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n"); + return ERR_PTR(-ENOMEM); + } + + pll_10nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); + if (IS_ERR_OR_NULL(pll_10nm->mmio)) { + DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n"); + return ERR_PTR(-ENOMEM); + } + + spin_lock_init(&pll_10nm->postdiv_lock); + + pll = &pll_10nm->base; + pll->min_rate = 1000000000UL; + pll->max_rate = 3500000000UL; + pll->get_provider = dsi_pll_10nm_get_provider; + pll->destroy = dsi_pll_10nm_destroy; + pll->save_state = dsi_pll_10nm_save_state; + pll->restore_state = dsi_pll_10nm_restore_state; + pll->set_usecase = dsi_pll_10nm_set_usecase; + + pll_10nm->vco_delay = 1; + + ret = pll_10nm_register(pll_10nm); + if (ret) { + DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); + return ERR_PTR(ret); + } + + /* TODO: Remove this when we have proper display handover support */ + msm_dsi_pll_save_state(pll); + + return pll; +} + static int dsi_phy_hw_v3_0_is_pll_on(struct msm_dsi_phy *phy) { void __iomem *base = phy->base; diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 6989730b5fbd..6a63901da7a4 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -3,13 +3,1102 @@ * Copyright (c) 2016, The Linux Foundation. All rights reserved. */ +#include +#include #include #include "dsi_phy.h" +#include "dsi_pll.h" #include "dsi.xml.h" #define PHY_14NM_CKLN_IDX 4 +/* + * DSI PLL 14nm - clock diagram (eg: DSI0): + * + * dsi0n1_postdiv_clk + * | + * | + * +----+ | +----+ + * dsi0vco_clk ---| n1 |--o--| /8 |-- dsi0pllbyte + * +----+ | +----+ + * | dsi0n1_postdivby2_clk + * | +----+ | + * o---| /2 |--o--|\ + * | +----+ | \ +----+ + * | | |--| n2 |-- dsi0pll + * o--------------| / +----+ + * |/ + */ + +#define POLL_MAX_READS 15 +#define POLL_TIMEOUT_US 1000 + +#define NUM_PROVIDED_CLKS 2 + +#define VCO_REF_CLK_RATE 19200000 +#define VCO_MIN_RATE 1300000000UL +#define VCO_MAX_RATE 2600000000UL + +#define DSI_BYTE_PLL_CLK 0 +#define DSI_PIXEL_PLL_CLK 1 + +#define DSI_PLL_DEFAULT_VCO_POSTDIV 1 + +struct dsi_pll_input { + u32 fref; /* reference clk */ + u32 fdata; /* bit clock rate */ + u32 dsiclk_sel; /* Mux configuration (see diagram) */ + u32 ssc_en; /* SSC enable/disable */ + u32 ldo_en; + + /* fixed params */ + u32 refclk_dbler_en; + u32 vco_measure_time; + u32 kvco_measure_time; + u32 bandgap_timer; + u32 pll_wakeup_timer; + u32 plllock_cnt; + u32 plllock_rng; + u32 ssc_center; + u32 ssc_adj_period; + u32 ssc_spread; + u32 ssc_freq; + u32 pll_ie_trim; + u32 pll_ip_trim; + u32 pll_iptat_trim; + u32 pll_cpcset_cur; + u32 pll_cpmset_cur; + + u32 pll_icpmset; + u32 pll_icpcset; + + u32 pll_icpmset_p; + u32 pll_icpmset_m; + + u32 pll_icpcset_p; + u32 pll_icpcset_m; + + u32 pll_lpf_res1; + u32 pll_lpf_cap1; + u32 pll_lpf_cap2; + u32 pll_c3ctrl; + u32 pll_r3ctrl; +}; + +struct dsi_pll_output { + u32 pll_txclk_en; + u32 dec_start; + u32 div_frac_start; + u32 ssc_period; + u32 ssc_step_size; + u32 plllock_cmp; + u32 pll_vco_div_ref; + u32 pll_vco_count; + u32 pll_kvco_div_ref; + u32 pll_kvco_count; + u32 pll_misc1; + u32 pll_lpf2_postdiv; + u32 pll_resetsm_cntrl; + u32 pll_resetsm_cntrl2; + u32 pll_resetsm_cntrl5; + u32 pll_kvco_code; + + u32 cmn_clk_cfg0; + u32 cmn_clk_cfg1; + u32 cmn_ldo_cntrl; + + u32 pll_postdiv; + u32 fcvo; +}; + +struct pll_14nm_cached_state { + unsigned long vco_rate; + u8 n2postdiv; + u8 n1postdiv; +}; + +struct dsi_pll_14nm { + struct msm_dsi_pll base; + + int id; + struct platform_device *pdev; + + void __iomem *phy_cmn_mmio; + void __iomem *mmio; + + int vco_delay; + + struct dsi_pll_input in; + struct dsi_pll_output out; + + /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */ + spinlock_t postdiv_lock; + + u64 vco_current_rate; + u64 vco_ref_clk_rate; + + /* private clocks: */ + struct clk_hw *hws[NUM_DSI_CLOCKS_MAX]; + u32 num_hws; + + /* clock-provider: */ + struct clk_hw_onecell_data *hw_data; + + struct pll_14nm_cached_state cached_state; + + enum msm_dsi_phy_usecase uc; + struct dsi_pll_14nm *slave; +}; + +#define to_pll_14nm(x) container_of(x, struct dsi_pll_14nm, base) + +/* + * Private struct for N1/N2 post-divider clocks. These clocks are similar to + * the generic clk_divider class of clocks. The only difference is that it + * also sets the slave DSI PLL's post-dividers if in Dual DSI mode + */ +struct dsi_pll_14nm_postdiv { + struct clk_hw hw; + + /* divider params */ + u8 shift; + u8 width; + u8 flags; /* same flags as used by clk_divider struct */ + + struct dsi_pll_14nm *pll; +}; + +#define to_pll_14nm_postdiv(_hw) container_of(_hw, struct dsi_pll_14nm_postdiv, hw) + +/* + * Global list of private DSI PLL struct pointers. We need this for Dual DSI + * mode, where the master PLL's clk_ops needs access the slave's private data + */ +static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX]; + +static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, + u32 nb_tries, u32 timeout_us) +{ + bool pll_locked = false; + void __iomem *base = pll_14nm->mmio; + u32 tries, val; + + tries = nb_tries; + while (tries--) { + val = pll_read(base + + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + pll_locked = !!(val & BIT(5)); + + if (pll_locked) + break; + + udelay(timeout_us); + } + + if (!pll_locked) { + tries = nb_tries; + while (tries--) { + val = pll_read(base + + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + pll_locked = !!(val & BIT(0)); + + if (pll_locked) + break; + + udelay(timeout_us); + } + } + + DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); + + return pll_locked; +} + +static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll) +{ + pll->in.fref = pll->vco_ref_clk_rate; + pll->in.fdata = 0; + pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */ + pll->in.ldo_en = 0; /* disabled for now */ + + /* fixed input */ + pll->in.refclk_dbler_en = 0; + pll->in.vco_measure_time = 5; + pll->in.kvco_measure_time = 5; + pll->in.bandgap_timer = 4; + pll->in.pll_wakeup_timer = 5; + pll->in.plllock_cnt = 1; + pll->in.plllock_rng = 0; + + /* + * SSC is enabled by default. We might need DT props for configuring + * some SSC params like PPM and center/down spread etc. + */ + pll->in.ssc_en = 1; + pll->in.ssc_center = 0; /* down spread by default */ + pll->in.ssc_spread = 5; /* PPM / 1000 */ + pll->in.ssc_freq = 31500; /* default recommended */ + pll->in.ssc_adj_period = 37; + + pll->in.pll_ie_trim = 4; + pll->in.pll_ip_trim = 4; + pll->in.pll_cpcset_cur = 1; + pll->in.pll_cpmset_cur = 1; + pll->in.pll_icpmset = 4; + pll->in.pll_icpcset = 4; + pll->in.pll_icpmset_p = 0; + pll->in.pll_icpmset_m = 0; + pll->in.pll_icpcset_p = 0; + pll->in.pll_icpcset_m = 0; + pll->in.pll_lpf_res1 = 3; + pll->in.pll_lpf_cap1 = 11; + pll->in.pll_lpf_cap2 = 1; + pll->in.pll_iptat_trim = 7; + pll->in.pll_c3ctrl = 2; + pll->in.pll_r3ctrl = 1; +} + +#define CEIL(x, y) (((x) + ((y) - 1)) / (y)) + +static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll) +{ + u32 period, ssc_period; + u32 ref, rem; + u64 step_size; + + DBG("vco=%lld ref=%lld", pll->vco_current_rate, pll->vco_ref_clk_rate); + + ssc_period = pll->in.ssc_freq / 500; + period = (u32)pll->vco_ref_clk_rate / 1000; + ssc_period = CEIL(period, ssc_period); + ssc_period -= 1; + pll->out.ssc_period = ssc_period; + + DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq, + pll->in.ssc_spread, pll->out.ssc_period); + + step_size = (u32)pll->vco_current_rate; + ref = pll->vco_ref_clk_rate; + ref /= 1000; + step_size = div_u64(step_size, ref); + step_size <<= 20; + step_size = div_u64(step_size, 1000); + step_size *= pll->in.ssc_spread; + step_size = div_u64(step_size, 1000); + step_size *= (pll->in.ssc_adj_period + 1); + + rem = 0; + step_size = div_u64_rem(step_size, ssc_period + 1, &rem); + if (rem) + step_size++; + + DBG("step_size=%lld", step_size); + + step_size &= 0x0ffff; /* take lower 16 bits */ + + pll->out.ssc_step_size = step_size; +} + +static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) +{ + struct dsi_pll_input *pin = &pll->in; + struct dsi_pll_output *pout = &pll->out; + u64 multiplier = BIT(20); + u64 dec_start_multiple, dec_start, pll_comp_val; + u32 duration, div_frac_start; + u64 vco_clk_rate = pll->vco_current_rate; + u64 fref = pll->vco_ref_clk_rate; + + DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref); + + dec_start_multiple = div_u64(vco_clk_rate * multiplier, fref); + div_u64_rem(dec_start_multiple, multiplier, &div_frac_start); + + dec_start = div_u64(dec_start_multiple, multiplier); + + pout->dec_start = (u32)dec_start; + pout->div_frac_start = div_frac_start; + + if (pin->plllock_cnt == 0) + duration = 1024; + else if (pin->plllock_cnt == 1) + duration = 256; + else if (pin->plllock_cnt == 2) + duration = 128; + else + duration = 32; + + pll_comp_val = duration * dec_start_multiple; + pll_comp_val = div_u64(pll_comp_val, multiplier); + do_div(pll_comp_val, 10); + + pout->plllock_cmp = (u32)pll_comp_val; + + pout->pll_txclk_en = 1; + pout->cmn_ldo_cntrl = 0x3c; +} + +static u32 pll_14nm_kvco_slop(u32 vrate) +{ + u32 slop = 0; + + if (vrate > VCO_MIN_RATE && vrate <= 1800000000UL) + slop = 600; + else if (vrate > 1800000000UL && vrate < 2300000000UL) + slop = 400; + else if (vrate > 2300000000UL && vrate < VCO_MAX_RATE) + slop = 280; + + return slop; +} + +static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll) +{ + struct dsi_pll_input *pin = &pll->in; + struct dsi_pll_output *pout = &pll->out; + u64 vco_clk_rate = pll->vco_current_rate; + u64 fref = pll->vco_ref_clk_rate; + u64 data; + u32 cnt; + + data = fref * pin->vco_measure_time; + do_div(data, 1000000); + data &= 0x03ff; /* 10 bits */ + data -= 2; + pout->pll_vco_div_ref = data; + + data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */ + data *= pin->vco_measure_time; + do_div(data, 10); + pout->pll_vco_count = data; + + data = fref * pin->kvco_measure_time; + do_div(data, 1000000); + data &= 0x03ff; /* 10 bits */ + data -= 1; + pout->pll_kvco_div_ref = data; + + cnt = pll_14nm_kvco_slop(vco_clk_rate); + cnt *= 2; + cnt /= 100; + cnt *= pin->kvco_measure_time; + pout->pll_kvco_count = cnt; + + pout->pll_misc1 = 16; + pout->pll_resetsm_cntrl = 48; + pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3; + pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer; + pout->pll_kvco_code = 0; +} + +static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) +{ + void __iomem *base = pll->mmio; + struct dsi_pll_input *pin = &pll->in; + struct dsi_pll_output *pout = &pll->out; + u8 data; + + data = pin->ssc_adj_period; + data &= 0x0ff; + pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data); + data = (pin->ssc_adj_period >> 8); + data &= 0x03; + pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data); + + data = pout->ssc_period; + data &= 0x0ff; + pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data); + data = (pout->ssc_period >> 8); + data &= 0x0ff; + pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data); + + data = pout->ssc_step_size; + data &= 0x0ff; + pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data); + data = (pout->ssc_step_size >> 8); + data &= 0x0ff; + pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data); + + data = (pin->ssc_center & 0x01); + data <<= 1; + data |= 0x01; /* enable */ + pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data); + + wmb(); /* make sure register committed */ +} + +static void pll_db_commit_common(struct dsi_pll_14nm *pll, + struct dsi_pll_input *pin, + struct dsi_pll_output *pout) +{ + void __iomem *base = pll->mmio; + u8 data; + + /* confgiure the non frequency dependent pll registers */ + data = 0; + pll_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data); + + data = pout->pll_txclk_en; + pll_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data); + + data = pout->pll_resetsm_cntrl; + pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data); + data = pout->pll_resetsm_cntrl2; + pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data); + data = pout->pll_resetsm_cntrl5; + pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data); + + data = pout->pll_vco_div_ref & 0xff; + pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data); + data = (pout->pll_vco_div_ref >> 8) & 0x3; + pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data); + + data = pout->pll_kvco_div_ref & 0xff; + pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data); + data = (pout->pll_kvco_div_ref >> 8) & 0x3; + pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data); + + data = pout->pll_misc1; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data); + + data = pin->pll_ie_trim; + pll_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data); + + data = pin->pll_ip_trim; + pll_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data); + + data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur; + pll_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data); + + data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data); + + data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data); + + data = pin->pll_icpmset << 3 | pin->pll_icpcset; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data); + + data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data); + + data = pin->pll_iptat_trim; + pll_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data); + + data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data); +} + +static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) +{ + void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; + + /* de assert pll start and apply pll sw reset */ + + /* stop pll */ + pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0); + + /* pll sw reset */ + pll_write_udelay(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x20, 10); + wmb(); /* make sure register committed */ + + pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0); + wmb(); /* make sure register committed */ +} + +static void pll_db_commit_14nm(struct dsi_pll_14nm *pll, + struct dsi_pll_input *pin, + struct dsi_pll_output *pout) +{ + void __iomem *base = pll->mmio; + void __iomem *cmn_base = pll->phy_cmn_mmio; + u8 data; + + DBG("DSI%d PLL", pll->id); + + data = pout->cmn_ldo_cntrl; + pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data); + + pll_db_commit_common(pll, pin, pout); + + pll_14nm_software_reset(pll); + + data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */ + pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data); + + data = 0xff; /* data, clk, pll normal operation */ + pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data); + + /* configure the frequency dependent pll registers */ + data = pout->dec_start; + pll_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data); + + data = pout->div_frac_start & 0xff; + pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data); + data = (pout->div_frac_start >> 8) & 0xff; + pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data); + data = (pout->div_frac_start >> 16) & 0xf; + pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data); + + data = pout->plllock_cmp & 0xff; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data); + + data = (pout->plllock_cmp >> 8) & 0xff; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data); + + data = (pout->plllock_cmp >> 16) & 0x3; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data); + + data = pin->plllock_cnt << 1 | pin->plllock_rng << 3; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data); + + data = pout->pll_vco_count & 0xff; + pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data); + data = (pout->pll_vco_count >> 8) & 0xff; + pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data); + + data = pout->pll_kvco_count & 0xff; + pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data); + data = (pout->pll_kvco_count >> 8) & 0x3; + pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data); + + data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1; + pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data); + + if (pin->ssc_en) + pll_db_commit_ssc(pll); + + wmb(); /* make sure register committed */ +} + +/* + * VCO clock Callbacks + */ +static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); + struct dsi_pll_input *pin = &pll_14nm->in; + struct dsi_pll_output *pout = &pll_14nm->out; + + DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->id, rate, + parent_rate); + + pll_14nm->vco_current_rate = rate; + pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; + + dsi_pll_14nm_input_init(pll_14nm); + + /* + * This configures the post divider internal to the VCO. It's + * fixed to divide by 1 for now. + * + * tx_band = pll_postdiv. + * 0: divided by 1 + * 1: divided by 2 + * 2: divided by 4 + * 3: divided by 8 + */ + pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV; + + pll_14nm_dec_frac_calc(pll_14nm); + + if (pin->ssc_en) + pll_14nm_ssc_calc(pll_14nm); + + pll_14nm_calc_vco_count(pll_14nm); + + /* commit the slave DSI PLL registers if we're master. Note that we + * don't lock the slave PLL. We just ensure that the PLL/PHY registers + * of the master and slave are identical + */ + if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { + struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; + + pll_db_commit_14nm(pll_14nm_slave, pin, pout); + } + + pll_db_commit_14nm(pll_14nm, pin, pout); + + return 0; +} + +static unsigned long dsi_pll_14nm_vco_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); + void __iomem *base = pll_14nm->mmio; + u64 vco_rate, multiplier = BIT(20); + u32 div_frac_start; + u32 dec_start; + u64 ref_clk = parent_rate; + + dec_start = pll_read(base + REG_DSI_14nm_PHY_PLL_DEC_START); + dec_start &= 0x0ff; + + DBG("dec_start = %x", dec_start); + + div_frac_start = (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3) + & 0xf) << 16; + div_frac_start |= (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2) + & 0xff) << 8; + div_frac_start |= pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1) + & 0xff; + + DBG("div_frac_start = %x", div_frac_start); + + vco_rate = ref_clk * dec_start; + + vco_rate += ((ref_clk * div_frac_start) / multiplier); + + /* + * Recalculating the rate from dec_start and frac_start doesn't end up + * the rate we originally set. Convert the freq to KHz, round it up and + * convert it back to MHz. + */ + vco_rate = DIV_ROUND_UP_ULL(vco_rate, 1000) * 1000; + + DBG("returning vco rate = %lu", (unsigned long)vco_rate); + + return (unsigned long)vco_rate; +} + +static const struct clk_ops clk_ops_dsi_pll_14nm_vco = { + .round_rate = msm_dsi_pll_helper_clk_round_rate, + .set_rate = dsi_pll_14nm_vco_set_rate, + .recalc_rate = dsi_pll_14nm_vco_recalc_rate, + .prepare = msm_dsi_pll_helper_clk_prepare, + .unprepare = msm_dsi_pll_helper_clk_unprepare, +}; + +/* + * N1 and N2 post-divider clock callbacks + */ +#define div_mask(width) ((1 << (width)) - 1) +static unsigned long dsi_pll_14nm_postdiv_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw); + struct dsi_pll_14nm *pll_14nm = postdiv->pll; + void __iomem *base = pll_14nm->phy_cmn_mmio; + u8 shift = postdiv->shift; + u8 width = postdiv->width; + u32 val; + + DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, parent_rate); + + val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0) >> shift; + val &= div_mask(width); + + return divider_recalc_rate(hw, parent_rate, val, NULL, + postdiv->flags, width); +} + +static long dsi_pll_14nm_postdiv_round_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long *prate) +{ + struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw); + struct dsi_pll_14nm *pll_14nm = postdiv->pll; + + DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, rate); + + return divider_round_rate(hw, rate, prate, NULL, + postdiv->width, + postdiv->flags); +} + +static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw); + struct dsi_pll_14nm *pll_14nm = postdiv->pll; + void __iomem *base = pll_14nm->phy_cmn_mmio; + spinlock_t *lock = &pll_14nm->postdiv_lock; + u8 shift = postdiv->shift; + u8 width = postdiv->width; + unsigned int value; + unsigned long flags = 0; + u32 val; + + DBG("DSI%d PLL parent rate=%lu parent rate %lu", pll_14nm->id, rate, + parent_rate); + + value = divider_get_val(rate, parent_rate, NULL, postdiv->width, + postdiv->flags); + + spin_lock_irqsave(lock, flags); + + val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0); + val &= ~(div_mask(width) << shift); + + val |= value << shift; + pll_write(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val); + + /* If we're master in dual DSI mode, then the slave PLL's post-dividers + * follow the master's post dividers + */ + if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { + struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; + void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio; + + pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val); + } + + spin_unlock_irqrestore(lock, flags); + + return 0; +} + +static const struct clk_ops clk_ops_dsi_pll_14nm_postdiv = { + .recalc_rate = dsi_pll_14nm_postdiv_recalc_rate, + .round_rate = dsi_pll_14nm_postdiv_round_rate, + .set_rate = dsi_pll_14nm_postdiv_set_rate, +}; + +/* + * PLL Callbacks + */ + +static int dsi_pll_14nm_enable_seq(struct msm_dsi_pll *pll) +{ + struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); + void __iomem *base = pll_14nm->mmio; + void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; + bool locked; + + DBG(""); + + pll_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10); + pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1); + + locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS, + POLL_TIMEOUT_US); + + if (unlikely(!locked)) + DRM_DEV_ERROR(&pll_14nm->pdev->dev, "DSI PLL lock failed\n"); + else + DBG("DSI PLL lock success"); + + return locked ? 0 : -EINVAL; +} + +static void dsi_pll_14nm_disable_seq(struct msm_dsi_pll *pll) +{ + struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); + void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; + + DBG(""); + + pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0); +} + +static void dsi_pll_14nm_save_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); + struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state; + void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; + u32 data; + + data = pll_read(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0); + + cached_state->n1postdiv = data & 0xf; + cached_state->n2postdiv = (data >> 4) & 0xf; + + DBG("DSI%d PLL save state %x %x", pll_14nm->id, + cached_state->n1postdiv, cached_state->n2postdiv); + + cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw); +} + +static int dsi_pll_14nm_restore_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); + struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state; + void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; + u32 data; + int ret; + + ret = dsi_pll_14nm_vco_set_rate(&pll->clk_hw, + cached_state->vco_rate, 0); + if (ret) { + DRM_DEV_ERROR(&pll_14nm->pdev->dev, + "restore vco rate failed. ret=%d\n", ret); + return ret; + } + + data = cached_state->n1postdiv | (cached_state->n2postdiv << 4); + + DBG("DSI%d PLL restore state %x %x", pll_14nm->id, + cached_state->n1postdiv, cached_state->n2postdiv); + + pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data); + + /* also restore post-dividers for slave DSI PLL */ + if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { + struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; + void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio; + + pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data); + } + + return 0; +} + +static int dsi_pll_14nm_set_usecase(struct msm_dsi_pll *pll, + enum msm_dsi_phy_usecase uc) +{ + struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); + void __iomem *base = pll_14nm->mmio; + u32 clkbuflr_en, bandgap = 0; + + switch (uc) { + case MSM_DSI_PHY_STANDALONE: + clkbuflr_en = 0x1; + break; + case MSM_DSI_PHY_MASTER: + clkbuflr_en = 0x3; + pll_14nm->slave = pll_14nm_list[(pll_14nm->id + 1) % DSI_MAX]; + break; + case MSM_DSI_PHY_SLAVE: + clkbuflr_en = 0x0; + bandgap = 0x3; + break; + default: + return -EINVAL; + } + + pll_write(base + REG_DSI_14nm_PHY_PLL_CLKBUFLR_EN, clkbuflr_en); + if (bandgap) + pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_BANDGAP, bandgap); + + pll_14nm->uc = uc; + + return 0; +} + +static int dsi_pll_14nm_get_provider(struct msm_dsi_pll *pll, + struct clk **byte_clk_provider, + struct clk **pixel_clk_provider) +{ + struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); + struct clk_hw_onecell_data *hw_data = pll_14nm->hw_data; + + if (byte_clk_provider) + *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk; + if (pixel_clk_provider) + *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk; + + return 0; +} + +static void dsi_pll_14nm_destroy(struct msm_dsi_pll *pll) +{ + struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); + struct platform_device *pdev = pll_14nm->pdev; + int num_hws = pll_14nm->num_hws; + + of_clk_del_provider(pdev->dev.of_node); + + while (num_hws--) + clk_hw_unregister(pll_14nm->hws[num_hws]); +} + +static struct clk_hw *pll_14nm_postdiv_register(struct dsi_pll_14nm *pll_14nm, + const char *name, + const char *parent_name, + unsigned long flags, + u8 shift) +{ + struct dsi_pll_14nm_postdiv *pll_postdiv; + struct device *dev = &pll_14nm->pdev->dev; + struct clk_init_data postdiv_init = { + .parent_names = (const char *[]) { parent_name }, + .num_parents = 1, + .name = name, + .flags = flags, + .ops = &clk_ops_dsi_pll_14nm_postdiv, + }; + int ret; + + pll_postdiv = devm_kzalloc(dev, sizeof(*pll_postdiv), GFP_KERNEL); + if (!pll_postdiv) + return ERR_PTR(-ENOMEM); + + pll_postdiv->pll = pll_14nm; + pll_postdiv->shift = shift; + /* both N1 and N2 postdividers are 4 bits wide */ + pll_postdiv->width = 4; + /* range of each divider is from 1 to 15 */ + pll_postdiv->flags = CLK_DIVIDER_ONE_BASED; + pll_postdiv->hw.init = &postdiv_init; + + ret = clk_hw_register(dev, &pll_postdiv->hw); + if (ret) + return ERR_PTR(ret); + + return &pll_postdiv->hw; +} + +static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm) +{ + char clk_name[32], parent[32], vco_name[32]; + struct clk_init_data vco_init = { + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .name = vco_name, + .flags = CLK_IGNORE_UNUSED, + .ops = &clk_ops_dsi_pll_14nm_vco, + }; + struct device *dev = &pll_14nm->pdev->dev; + struct clk_hw **hws = pll_14nm->hws; + struct clk_hw_onecell_data *hw_data; + struct clk_hw *hw; + int num = 0; + int ret; + + DBG("DSI%d", pll_14nm->id); + + hw_data = devm_kzalloc(dev, sizeof(*hw_data) + + NUM_PROVIDED_CLKS * sizeof(struct clk_hw *), + GFP_KERNEL); + if (!hw_data) + return -ENOMEM; + + snprintf(vco_name, 32, "dsi%dvco_clk", pll_14nm->id); + pll_14nm->base.clk_hw.init = &vco_init; + + ret = clk_hw_register(dev, &pll_14nm->base.clk_hw); + if (ret) + return ret; + + hws[num++] = &pll_14nm->base.clk_hw; + + snprintf(clk_name, 32, "dsi%dn1_postdiv_clk", pll_14nm->id); + snprintf(parent, 32, "dsi%dvco_clk", pll_14nm->id); + + /* N1 postdiv, bits 0-3 in REG_DSI_14nm_PHY_CMN_CLK_CFG0 */ + hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent, + CLK_SET_RATE_PARENT, 0); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + + snprintf(clk_name, 32, "dsi%dpllbyte", pll_14nm->id); + snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id); + + /* DSI Byte clock = VCO_CLK / N1 / 8 */ + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, + CLK_SET_RATE_PARENT, 1, 8); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + hw_data->hws[DSI_BYTE_PLL_CLK] = hw; + + snprintf(clk_name, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id); + snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id); + + /* + * Skip the mux for now, force DSICLK_SEL to 1, Add a /2 divider + * on the way. Don't let it set parent. + */ + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, 0, 1, 2); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + + snprintf(clk_name, 32, "dsi%dpll", pll_14nm->id); + snprintf(parent, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id); + + /* DSI pixel clock = VCO_CLK / N1 / 2 / N2 + * This is the output of N2 post-divider, bits 4-7 in + * REG_DSI_14nm_PHY_CMN_CLK_CFG0. Don't let it set parent. + */ + hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent, 0, 4); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hws[num++] = hw; + hw_data->hws[DSI_PIXEL_PLL_CLK] = hw; + + pll_14nm->num_hws = num; + + hw_data->num = NUM_PROVIDED_CLKS; + pll_14nm->hw_data = hw_data; + + ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, + pll_14nm->hw_data); + if (ret) { + DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret); + return ret; + } + + return 0; +} + +struct msm_dsi_pll *msm_dsi_pll_14nm_init(struct platform_device *pdev, int id) +{ + struct dsi_pll_14nm *pll_14nm; + struct msm_dsi_pll *pll; + int ret; + + if (!pdev) + return ERR_PTR(-ENODEV); + + pll_14nm = devm_kzalloc(&pdev->dev, sizeof(*pll_14nm), GFP_KERNEL); + if (!pll_14nm) + return ERR_PTR(-ENOMEM); + + DBG("PLL%d", id); + + pll_14nm->pdev = pdev; + pll_14nm->id = id; + pll_14nm_list[id] = pll_14nm; + + pll_14nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY"); + if (IS_ERR_OR_NULL(pll_14nm->phy_cmn_mmio)) { + DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n"); + return ERR_PTR(-ENOMEM); + } + + pll_14nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); + if (IS_ERR_OR_NULL(pll_14nm->mmio)) { + DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n"); + return ERR_PTR(-ENOMEM); + } + + spin_lock_init(&pll_14nm->postdiv_lock); + + pll = &pll_14nm->base; + pll->min_rate = VCO_MIN_RATE; + pll->max_rate = VCO_MAX_RATE; + pll->get_provider = dsi_pll_14nm_get_provider; + pll->destroy = dsi_pll_14nm_destroy; + pll->disable_seq = dsi_pll_14nm_disable_seq; + pll->save_state = dsi_pll_14nm_save_state; + pll->restore_state = dsi_pll_14nm_restore_state; + pll->set_usecase = dsi_pll_14nm_set_usecase; + + pll_14nm->vco_delay = 1; + + pll->en_seq_cnt = 1; + pll->enable_seqs[0] = dsi_pll_14nm_enable_seq; + + ret = pll_14nm_register(pll_14nm); + if (ret) { + DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); + return ERR_PTR(ret); + } + + return pll; +} + static void dsi_14nm_dphy_set_timing(struct msm_dsi_phy *phy, struct msm_dsi_dphy_timing *timing, int lane_idx) diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c index 5bf79de0da67..2f502efa4dd5 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c @@ -3,9 +3,646 @@ * Copyright (c) 2015, The Linux Foundation. All rights reserved. */ +#include +#include + #include "dsi_phy.h" +#include "dsi_pll.h" #include "dsi.xml.h" +/* + * DSI PLL 28nm - clock diagram (eg: DSI0): + * + * dsi0analog_postdiv_clk + * | dsi0indirect_path_div2_clk + * | | + * +------+ | +----+ | |\ dsi0byte_mux + * dsi0vco_clk --o--| DIV1 |--o--| /2 |--o--| \ | + * | +------+ +----+ | m| | +----+ + * | | u|--o--| /4 |-- dsi0pllbyte + * | | x| +----+ + * o--------------------------| / + * | |/ + * | +------+ + * o----------| DIV3 |------------------------- dsi0pll + * +------+ + */ + +#define POLL_MAX_READS 10 +#define POLL_TIMEOUT_US 50 + +#define NUM_PROVIDED_CLKS 2 + +#define VCO_REF_CLK_RATE 19200000 +#define VCO_MIN_RATE 350000000 +#define VCO_MAX_RATE 750000000 + +#define DSI_BYTE_PLL_CLK 0 +#define DSI_PIXEL_PLL_CLK 1 + +#define LPFR_LUT_SIZE 10 +struct lpfr_cfg { + unsigned long vco_rate; + u32 resistance; +}; + +/* Loop filter resistance: */ +static const struct lpfr_cfg lpfr_lut[LPFR_LUT_SIZE] = { + { 479500000, 8 }, + { 480000000, 11 }, + { 575500000, 8 }, + { 576000000, 12 }, + { 610500000, 8 }, + { 659500000, 9 }, + { 671500000, 10 }, + { 672000000, 14 }, + { 708500000, 10 }, + { 750000000, 11 }, +}; + +struct pll_28nm_cached_state { + unsigned long vco_rate; + u8 postdiv3; + u8 postdiv1; + u8 byte_mux; +}; + +struct dsi_pll_28nm { + struct msm_dsi_pll base; + + int id; + struct platform_device *pdev; + void __iomem *mmio; + + int vco_delay; + + /* private clocks: */ + struct clk *clks[NUM_DSI_CLOCKS_MAX]; + u32 num_clks; + + /* clock-provider: */ + struct clk *provided_clks[NUM_PROVIDED_CLKS]; + struct clk_onecell_data clk_data; + + struct pll_28nm_cached_state cached_state; +}; + +#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base) + +static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm, + u32 nb_tries, u32 timeout_us) +{ + bool pll_locked = false; + u32 val; + + while (nb_tries--) { + val = pll_read(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_STATUS); + pll_locked = !!(val & DSI_28nm_PHY_PLL_STATUS_PLL_RDY); + + if (pll_locked) + break; + + udelay(timeout_us); + } + DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); + + return pll_locked; +} + +static void pll_28nm_software_reset(struct dsi_pll_28nm *pll_28nm) +{ + void __iomem *base = pll_28nm->mmio; + + /* + * Add HW recommended delays after toggling the software + * reset bit off and back on. + */ + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, + DSI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET, 1); + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, 0x00, 1); +} + +/* + * Clock Callbacks + */ +static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct device *dev = &pll_28nm->pdev->dev; + void __iomem *base = pll_28nm->mmio; + unsigned long div_fbx1000, gen_vco_clk; + u32 refclk_cfg, frac_n_mode, frac_n_value; + u32 sdm_cfg0, sdm_cfg1, sdm_cfg2, sdm_cfg3; + u32 cal_cfg10, cal_cfg11; + u32 rem; + int i; + + VERB("rate=%lu, parent's=%lu", rate, parent_rate); + + /* Force postdiv2 to be div-4 */ + pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV2_CFG, 3); + + /* Configure the Loop filter resistance */ + for (i = 0; i < LPFR_LUT_SIZE; i++) + if (rate <= lpfr_lut[i].vco_rate) + break; + if (i == LPFR_LUT_SIZE) { + DRM_DEV_ERROR(dev, "unable to get loop filter resistance. vco=%lu\n", + rate); + return -EINVAL; + } + pll_write(base + REG_DSI_28nm_PHY_PLL_LPFR_CFG, lpfr_lut[i].resistance); + + /* Loop filter capacitance values : c1 and c2 */ + pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC1_CFG, 0x70); + pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC2_CFG, 0x15); + + rem = rate % VCO_REF_CLK_RATE; + if (rem) { + refclk_cfg = DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR; + frac_n_mode = 1; + div_fbx1000 = rate / (VCO_REF_CLK_RATE / 500); + gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 500); + } else { + refclk_cfg = 0x0; + frac_n_mode = 0; + div_fbx1000 = rate / (VCO_REF_CLK_RATE / 1000); + gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 1000); + } + + DBG("refclk_cfg = %d", refclk_cfg); + + rem = div_fbx1000 % 1000; + frac_n_value = (rem << 16) / 1000; + + DBG("div_fb = %lu", div_fbx1000); + DBG("frac_n_value = %d", frac_n_value); + + DBG("Generated VCO Clock: %lu", gen_vco_clk); + rem = 0; + sdm_cfg1 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1); + sdm_cfg1 &= ~DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK; + if (frac_n_mode) { + sdm_cfg0 = 0x0; + sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(0); + sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET( + (u32)(((div_fbx1000 / 1000) & 0x3f) - 1)); + sdm_cfg3 = frac_n_value >> 8; + sdm_cfg2 = frac_n_value & 0xff; + } else { + sdm_cfg0 = DSI_28nm_PHY_PLL_SDM_CFG0_BYP; + sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV( + (u32)(((div_fbx1000 / 1000) & 0x3f) - 1)); + sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(0); + sdm_cfg2 = 0; + sdm_cfg3 = 0; + } + + DBG("sdm_cfg0=%d", sdm_cfg0); + DBG("sdm_cfg1=%d", sdm_cfg1); + DBG("sdm_cfg2=%d", sdm_cfg2); + DBG("sdm_cfg3=%d", sdm_cfg3); + + cal_cfg11 = (u32)(gen_vco_clk / (256 * 1000000)); + cal_cfg10 = (u32)((gen_vco_clk % (256 * 1000000)) / 1000000); + DBG("cal_cfg10=%d, cal_cfg11=%d", cal_cfg10, cal_cfg11); + + pll_write(base + REG_DSI_28nm_PHY_PLL_CHGPUMP_CFG, 0x02); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG3, 0x2b); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG4, 0x06); + pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); + + pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1, sdm_cfg1); + pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2, + DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0(sdm_cfg2)); + pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3, + DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8(sdm_cfg3)); + pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG4, 0x00); + + /* Add hardware recommended delay for correct PLL configuration */ + if (pll_28nm->vco_delay) + udelay(pll_28nm->vco_delay); + + pll_write(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG, refclk_cfg); + pll_write(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00); + pll_write(base + REG_DSI_28nm_PHY_PLL_VCOLPF_CFG, 0x31); + pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0, sdm_cfg0); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG0, 0x12); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG6, 0x30); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG7, 0x00); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG8, 0x60); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG9, 0x00); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG10, cal_cfg10 & 0xff); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG11, cal_cfg11 & 0xff); + pll_write(base + REG_DSI_28nm_PHY_PLL_EFUSE_CFG, 0x20); + + return 0; +} + +static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS, + POLL_TIMEOUT_US); +} + +static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + void __iomem *base = pll_28nm->mmio; + u32 sdm0, doubler, sdm_byp_div; + u32 sdm_dc_off, sdm_freq_seed, sdm2, sdm3; + u32 ref_clk = VCO_REF_CLK_RATE; + unsigned long vco_rate; + + VERB("parent_rate=%lu", parent_rate); + + /* Check to see if the ref clk doubler is enabled */ + doubler = pll_read(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG) & + DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR; + ref_clk += (doubler * VCO_REF_CLK_RATE); + + /* see if it is integer mode or sdm mode */ + sdm0 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0); + if (sdm0 & DSI_28nm_PHY_PLL_SDM_CFG0_BYP) { + /* integer mode */ + sdm_byp_div = FIELD( + pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0), + DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV) + 1; + vco_rate = ref_clk * sdm_byp_div; + } else { + /* sdm mode */ + sdm_dc_off = FIELD( + pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1), + DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET); + DBG("sdm_dc_off = %d", sdm_dc_off); + sdm2 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2), + DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0); + sdm3 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3), + DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8); + sdm_freq_seed = (sdm3 << 8) | sdm2; + DBG("sdm_freq_seed = %d", sdm_freq_seed); + + vco_rate = (ref_clk * (sdm_dc_off + 1)) + + mult_frac(ref_clk, sdm_freq_seed, BIT(16)); + DBG("vco rate = %lu", vco_rate); + } + + DBG("returning vco rate = %lu", vco_rate); + + return vco_rate; +} + +static const struct clk_ops clk_ops_dsi_pll_28nm_vco = { + .round_rate = msm_dsi_pll_helper_clk_round_rate, + .set_rate = dsi_pll_28nm_clk_set_rate, + .recalc_rate = dsi_pll_28nm_clk_recalc_rate, + .prepare = msm_dsi_pll_helper_clk_prepare, + .unprepare = msm_dsi_pll_helper_clk_unprepare, + .is_enabled = dsi_pll_28nm_clk_is_enabled, +}; + +/* + * PLL Callbacks + */ +static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct device *dev = &pll_28nm->pdev->dev; + void __iomem *base = pll_28nm->mmio; + u32 max_reads = 5, timeout_us = 100; + bool locked; + u32 val; + int i; + + DBG("id=%d", pll_28nm->id); + + pll_28nm_software_reset(pll_28nm); + + /* + * PLL power up sequence. + * Add necessary delays recommended by hardware. + */ + val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); + + for (i = 0; i < 2; i++) { + /* DSI Uniphy lock detect setting */ + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, + 0x0c, 100); + pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); + + /* poll for PLL ready status */ + locked = pll_28nm_poll_for_ready(pll_28nm, + max_reads, timeout_us); + if (locked) + break; + + pll_28nm_software_reset(pll_28nm); + + /* + * PLL power up sequence. + * Add necessary delays recommended by hardware. + */ + val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 250); + + val &= ~DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); + } + + if (unlikely(!locked)) + DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); + else + DBG("DSI PLL Lock success"); + + return locked ? 0 : -EINVAL; +} + +static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct device *dev = &pll_28nm->pdev->dev; + void __iomem *base = pll_28nm->mmio; + bool locked; + u32 max_reads = 10, timeout_us = 50; + u32 val; + + DBG("id=%d", pll_28nm->id); + + pll_28nm_software_reset(pll_28nm); + + /* + * PLL power up sequence. + * Add necessary delays recommended by hardware. + */ + pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34, 500); + + val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; + pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; + pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B | + DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; + pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); + + /* DSI PLL toggle lock detect setting */ + pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x04, 500); + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x05, 512); + + locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us); + + if (unlikely(!locked)) + DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); + else + DBG("DSI PLL lock success"); + + return locked ? 0 : -EINVAL; +} + +static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + DBG("id=%d", pll_28nm->id); + pll_write(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_GLB_CFG, 0x00); +} + +static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; + void __iomem *base = pll_28nm->mmio; + + cached_state->postdiv3 = + pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG); + cached_state->postdiv1 = + pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG); + cached_state->byte_mux = pll_read(base + REG_DSI_28nm_PHY_PLL_VREG_CFG); + if (dsi_pll_28nm_clk_is_enabled(&pll->clk_hw)) + cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw); + else + cached_state->vco_rate = 0; +} + +static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; + void __iomem *base = pll_28nm->mmio; + int ret; + + ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw, + cached_state->vco_rate, 0); + if (ret) { + DRM_DEV_ERROR(&pll_28nm->pdev->dev, + "restore vco rate failed. ret=%d\n", ret); + return ret; + } + + pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG, + cached_state->postdiv3); + pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG, + cached_state->postdiv1); + pll_write(base + REG_DSI_28nm_PHY_PLL_VREG_CFG, + cached_state->byte_mux); + + return 0; +} + +static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll, + struct clk **byte_clk_provider, + struct clk **pixel_clk_provider) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + if (byte_clk_provider) + *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK]; + if (pixel_clk_provider) + *pixel_clk_provider = + pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK]; + + return 0; +} + +static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + int i; + + msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev, + pll_28nm->clks, pll_28nm->num_clks); + + for (i = 0; i < NUM_PROVIDED_CLKS; i++) + pll_28nm->provided_clks[i] = NULL; + + pll_28nm->num_clks = 0; + pll_28nm->clk_data.clks = NULL; + pll_28nm->clk_data.clk_num = 0; +} + +static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) +{ + char clk_name[32], parent1[32], parent2[32], vco_name[32]; + struct clk_init_data vco_init = { + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .name = vco_name, + .flags = CLK_IGNORE_UNUSED, + .ops = &clk_ops_dsi_pll_28nm_vco, + }; + struct device *dev = &pll_28nm->pdev->dev; + struct clk **clks = pll_28nm->clks; + struct clk **provided_clks = pll_28nm->provided_clks; + int num = 0; + int ret; + + DBG("%d", pll_28nm->id); + + snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id); + pll_28nm->base.clk_hw.init = &vco_init; + clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw); + + snprintf(clk_name, 32, "dsi%danalog_postdiv_clk", pll_28nm->id); + snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id); + clks[num++] = clk_register_divider(dev, clk_name, + parent1, CLK_SET_RATE_PARENT, + pll_28nm->mmio + + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG, + 0, 4, 0, NULL); + + snprintf(clk_name, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id); + snprintf(parent1, 32, "dsi%danalog_postdiv_clk", pll_28nm->id); + clks[num++] = clk_register_fixed_factor(dev, clk_name, + parent1, CLK_SET_RATE_PARENT, + 1, 2); + + snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id); + snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id); + clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] = + clk_register_divider(dev, clk_name, + parent1, 0, pll_28nm->mmio + + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG, + 0, 8, 0, NULL); + + snprintf(clk_name, 32, "dsi%dbyte_mux", pll_28nm->id); + snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id); + snprintf(parent2, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id); + clks[num++] = clk_register_mux(dev, clk_name, + ((const char *[]){ + parent1, parent2 + }), 2, CLK_SET_RATE_PARENT, pll_28nm->mmio + + REG_DSI_28nm_PHY_PLL_VREG_CFG, 1, 1, 0, NULL); + + snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id); + snprintf(parent1, 32, "dsi%dbyte_mux", pll_28nm->id); + clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] = + clk_register_fixed_factor(dev, clk_name, + parent1, CLK_SET_RATE_PARENT, 1, 4); + + pll_28nm->num_clks = num; + + pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS; + pll_28nm->clk_data.clks = provided_clks; + + ret = of_clk_add_provider(dev->of_node, + of_clk_src_onecell_get, &pll_28nm->clk_data); + if (ret) { + DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret); + return ret; + } + + return 0; +} + +struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev, + enum msm_dsi_phy_type type, int id) +{ + struct dsi_pll_28nm *pll_28nm; + struct msm_dsi_pll *pll; + int ret; + + if (!pdev) + return ERR_PTR(-ENODEV); + + pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL); + if (!pll_28nm) + return ERR_PTR(-ENOMEM); + + pll_28nm->pdev = pdev; + pll_28nm->id = id; + + pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); + if (IS_ERR_OR_NULL(pll_28nm->mmio)) { + DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__); + return ERR_PTR(-ENOMEM); + } + + pll = &pll_28nm->base; + pll->min_rate = VCO_MIN_RATE; + pll->max_rate = VCO_MAX_RATE; + pll->get_provider = dsi_pll_28nm_get_provider; + pll->destroy = dsi_pll_28nm_destroy; + pll->disable_seq = dsi_pll_28nm_disable_seq; + pll->save_state = dsi_pll_28nm_save_state; + pll->restore_state = dsi_pll_28nm_restore_state; + + if (type == MSM_DSI_PHY_28NM_HPM) { + pll_28nm->vco_delay = 1; + + pll->en_seq_cnt = 3; + pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_hpm; + pll->enable_seqs[1] = dsi_pll_28nm_enable_seq_hpm; + pll->enable_seqs[2] = dsi_pll_28nm_enable_seq_hpm; + } else if (type == MSM_DSI_PHY_28NM_LP) { + pll_28nm->vco_delay = 1000; + + pll->en_seq_cnt = 1; + pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_lp; + } else { + DRM_DEV_ERROR(&pdev->dev, "phy type (%d) is not 28nm\n", type); + return ERR_PTR(-EINVAL); + } + + ret = pll_28nm_register(pll_28nm); + if (ret) { + DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); + return ERR_PTR(ret); + } + + return pll; +} + + static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy, struct msm_dsi_dphy_timing *timing) { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c index 5d33de27a0f4..4a40513057e8 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c @@ -3,11 +3,530 @@ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. */ +#include #include #include "dsi_phy.h" +#include "dsi_pll.h" #include "dsi.xml.h" +/* + * DSI PLL 28nm (8960/A family) - clock diagram (eg: DSI1): + * + * + * +------+ + * dsi1vco_clk ----o-----| DIV1 |---dsi1pllbit (not exposed as clock) + * F * byte_clk | +------+ + * | bit clock divider (F / 8) + * | + * | +------+ + * o-----| DIV2 |---dsi0pllbyte---o---> To byte RCG + * | +------+ | (sets parent rate) + * | byte clock divider (F) | + * | | + * | o---> To esc RCG + * | (doesn't set parent rate) + * | + * | +------+ + * o-----| DIV3 |----dsi0pll------o---> To dsi RCG + * +------+ | (sets parent rate) + * dsi clock divider (F * magic) | + * | + * o---> To pixel rcg + * (doesn't set parent rate) + */ + +#define POLL_MAX_READS 8000 +#define POLL_TIMEOUT_US 1 + +#define NUM_PROVIDED_CLKS 2 + +#define VCO_REF_CLK_RATE 27000000 +#define VCO_MIN_RATE 600000000 +#define VCO_MAX_RATE 1200000000 + +#define DSI_BYTE_PLL_CLK 0 +#define DSI_PIXEL_PLL_CLK 1 + +#define VCO_PREF_DIV_RATIO 27 + +struct pll_28nm_cached_state { + unsigned long vco_rate; + u8 postdiv3; + u8 postdiv2; + u8 postdiv1; +}; + +struct clk_bytediv { + struct clk_hw hw; + void __iomem *reg; +}; + +struct dsi_pll_28nm { + struct msm_dsi_pll base; + + int id; + struct platform_device *pdev; + void __iomem *mmio; + + /* custom byte clock divider */ + struct clk_bytediv *bytediv; + + /* private clocks: */ + struct clk *clks[NUM_DSI_CLOCKS_MAX]; + u32 num_clks; + + /* clock-provider: */ + struct clk *provided_clks[NUM_PROVIDED_CLKS]; + struct clk_onecell_data clk_data; + + struct pll_28nm_cached_state cached_state; +}; + +#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base) + +static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm, + int nb_tries, int timeout_us) +{ + bool pll_locked = false; + u32 val; + + while (nb_tries--) { + val = pll_read(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_RDY); + pll_locked = !!(val & DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY); + + if (pll_locked) + break; + + udelay(timeout_us); + } + DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); + + return pll_locked; +} + +/* + * Clock Callbacks + */ +static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + void __iomem *base = pll_28nm->mmio; + u32 val, temp, fb_divider; + + DBG("rate=%lu, parent's=%lu", rate, parent_rate); + + temp = rate / 10; + val = VCO_REF_CLK_RATE / 10; + fb_divider = (temp * VCO_PREF_DIV_RATIO) / val; + fb_divider = fb_divider / 2 - 1; + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1, + fb_divider & 0xff); + + val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2); + + val |= (fb_divider >> 8) & 0x07; + + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2, + val); + + val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3); + + val |= (VCO_PREF_DIV_RATIO - 1) & 0x3f; + + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3, + val); + + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_6, + 0xf); + + val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); + val |= 0x7 << 4; + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, + val); + + return 0; +} + +static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS, + POLL_TIMEOUT_US); +} + +static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + void __iomem *base = pll_28nm->mmio; + unsigned long vco_rate; + u32 status, fb_divider, temp, ref_divider; + + VERB("parent_rate=%lu", parent_rate); + + status = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0); + + if (status & DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE) { + fb_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1); + fb_divider &= 0xff; + temp = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2) & 0x07; + fb_divider = (temp << 8) | fb_divider; + fb_divider += 1; + + ref_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3); + ref_divider &= 0x3f; + ref_divider += 1; + + /* multiply by 2 */ + vco_rate = (parent_rate / ref_divider) * fb_divider * 2; + } else { + vco_rate = 0; + } + + DBG("returning vco rate = %lu", vco_rate); + + return vco_rate; +} + +static const struct clk_ops clk_ops_dsi_pll_28nm_vco = { + .round_rate = msm_dsi_pll_helper_clk_round_rate, + .set_rate = dsi_pll_28nm_clk_set_rate, + .recalc_rate = dsi_pll_28nm_clk_recalc_rate, + .prepare = msm_dsi_pll_helper_clk_prepare, + .unprepare = msm_dsi_pll_helper_clk_unprepare, + .is_enabled = dsi_pll_28nm_clk_is_enabled, +}; + +/* + * Custom byte clock divier clk_ops + * + * This clock is the entry point to configuring the PLL. The user (dsi host) + * will set this clock's rate to the desired byte clock rate. The VCO lock + * frequency is a multiple of the byte clock rate. The multiplication factor + * (shown as F in the diagram above) is a function of the byte clock rate. + * + * This custom divider clock ensures that its parent (VCO) is set to the + * desired rate, and that the byte clock postdivider (POSTDIV2) is configured + * accordingly + */ +#define to_clk_bytediv(_hw) container_of(_hw, struct clk_bytediv, hw) + +static unsigned long clk_bytediv_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_bytediv *bytediv = to_clk_bytediv(hw); + unsigned int div; + + div = pll_read(bytediv->reg) & 0xff; + + return parent_rate / (div + 1); +} + +/* find multiplication factor(wrt byte clock) at which the VCO should be set */ +static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate) +{ + unsigned long bit_mhz; + + /* convert to bit clock in Mhz */ + bit_mhz = (byte_clk_rate * 8) / 1000000; + + if (bit_mhz < 125) + return 64; + else if (bit_mhz < 250) + return 32; + else if (bit_mhz < 600) + return 16; + else + return 8; +} + +static long clk_bytediv_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + unsigned long best_parent; + unsigned int factor; + + factor = get_vco_mul_factor(rate); + + best_parent = rate * factor; + *prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent); + + return *prate / factor; +} + +static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_bytediv *bytediv = to_clk_bytediv(hw); + u32 val; + unsigned int factor; + + factor = get_vco_mul_factor(rate); + + val = pll_read(bytediv->reg); + val |= (factor - 1) & 0xff; + pll_write(bytediv->reg, val); + + return 0; +} + +/* Our special byte clock divider ops */ +static const struct clk_ops clk_bytediv_ops = { + .round_rate = clk_bytediv_round_rate, + .set_rate = clk_bytediv_set_rate, + .recalc_rate = clk_bytediv_recalc_rate, +}; + +/* + * PLL Callbacks + */ +static int dsi_pll_28nm_enable_seq(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct device *dev = &pll_28nm->pdev->dev; + void __iomem *base = pll_28nm->mmio; + bool locked; + unsigned int bit_div, byte_div; + int max_reads = 1000, timeout_us = 100; + u32 val; + + DBG("id=%d", pll_28nm->id); + + /* + * before enabling the PLL, configure the bit clock divider since we + * don't expose it as a clock to the outside world + * 1: read back the byte clock divider that should already be set + * 2: divide by 8 to get bit clock divider + * 3: write it to POSTDIV1 + */ + val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9); + byte_div = val + 1; + bit_div = byte_div / 8; + + val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); + val &= ~0xf; + val |= (bit_div - 1); + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val); + + /* enable the PLL */ + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, + DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE); + + locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us); + + if (unlikely(!locked)) + DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); + else + DBG("DSI PLL lock success"); + + return locked ? 0 : -EINVAL; +} + +static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + DBG("id=%d", pll_28nm->id); + pll_write(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00); +} + +static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; + void __iomem *base = pll_28nm->mmio; + + cached_state->postdiv3 = + pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10); + cached_state->postdiv2 = + pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9); + cached_state->postdiv1 = + pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); + + cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw); +} + +static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; + void __iomem *base = pll_28nm->mmio; + int ret; + + ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw, + cached_state->vco_rate, 0); + if (ret) { + DRM_DEV_ERROR(&pll_28nm->pdev->dev, + "restore vco rate failed. ret=%d\n", ret); + return ret; + } + + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10, + cached_state->postdiv3); + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9, + cached_state->postdiv2); + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, + cached_state->postdiv1); + + return 0; +} + +static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll, + struct clk **byte_clk_provider, + struct clk **pixel_clk_provider) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + if (byte_clk_provider) + *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK]; + if (pixel_clk_provider) + *pixel_clk_provider = + pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK]; + + return 0; +} + +static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev, + pll_28nm->clks, pll_28nm->num_clks); +} + +static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) +{ + char *clk_name, *parent_name, *vco_name; + struct clk_init_data vco_init = { + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .flags = CLK_IGNORE_UNUSED, + .ops = &clk_ops_dsi_pll_28nm_vco, + }; + struct device *dev = &pll_28nm->pdev->dev; + struct clk **clks = pll_28nm->clks; + struct clk **provided_clks = pll_28nm->provided_clks; + struct clk_bytediv *bytediv; + struct clk_init_data bytediv_init = { }; + int ret, num = 0; + + DBG("%d", pll_28nm->id); + + bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL); + if (!bytediv) + return -ENOMEM; + + vco_name = devm_kzalloc(dev, 32, GFP_KERNEL); + if (!vco_name) + return -ENOMEM; + + parent_name = devm_kzalloc(dev, 32, GFP_KERNEL); + if (!parent_name) + return -ENOMEM; + + clk_name = devm_kzalloc(dev, 32, GFP_KERNEL); + if (!clk_name) + return -ENOMEM; + + pll_28nm->bytediv = bytediv; + + snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id); + vco_init.name = vco_name; + + pll_28nm->base.clk_hw.init = &vco_init; + + clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw); + + /* prepare and register bytediv */ + bytediv->hw.init = &bytediv_init; + bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9; + + snprintf(parent_name, 32, "dsi%dvco_clk", pll_28nm->id); + snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id); + + bytediv_init.name = clk_name; + bytediv_init.ops = &clk_bytediv_ops; + bytediv_init.flags = CLK_SET_RATE_PARENT; + bytediv_init.parent_names = (const char * const *) &parent_name; + bytediv_init.num_parents = 1; + + /* DIV2 */ + clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] = + clk_register(dev, &bytediv->hw); + + snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id); + /* DIV3 */ + clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] = + clk_register_divider(dev, clk_name, + parent_name, 0, pll_28nm->mmio + + REG_DSI_28nm_8960_PHY_PLL_CTRL_10, + 0, 8, 0, NULL); + + pll_28nm->num_clks = num; + + pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS; + pll_28nm->clk_data.clks = provided_clks; + + ret = of_clk_add_provider(dev->of_node, + of_clk_src_onecell_get, &pll_28nm->clk_data); + if (ret) { + DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret); + return ret; + } + + return 0; +} + +struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev, + int id) +{ + struct dsi_pll_28nm *pll_28nm; + struct msm_dsi_pll *pll; + int ret; + + if (!pdev) + return ERR_PTR(-ENODEV); + + pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL); + if (!pll_28nm) + return ERR_PTR(-ENOMEM); + + pll_28nm->pdev = pdev; + pll_28nm->id = id + 1; + + pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); + if (IS_ERR_OR_NULL(pll_28nm->mmio)) { + DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__); + return ERR_PTR(-ENOMEM); + } + + pll = &pll_28nm->base; + pll->min_rate = VCO_MIN_RATE; + pll->max_rate = VCO_MAX_RATE; + pll->get_provider = dsi_pll_28nm_get_provider; + pll->destroy = dsi_pll_28nm_destroy; + pll->disable_seq = dsi_pll_28nm_disable_seq; + pll->save_state = dsi_pll_28nm_save_state; + pll->restore_state = dsi_pll_28nm_restore_state; + + pll->en_seq_cnt = 1; + pll->enable_seqs[0] = dsi_pll_28nm_enable_seq; + + ret = pll_28nm_register(pll_28nm); + if (ret) { + DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); + return ERR_PTR(ret); + } + + return pll; +} + static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy, struct msm_dsi_dphy_timing *timing) { diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c index cbfeec860e69..f9af9d70b56a 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c @@ -3,11 +3,916 @@ * Copyright (c) 2018, The Linux Foundation */ +#include +#include #include +#include "dsi_pll.h" #include "dsi_phy.h" #include "dsi.xml.h" +/* + * DSI PLL 7nm - clock diagram (eg: DSI0): TODO: updated CPHY diagram + * + * dsi0_pll_out_div_clk dsi0_pll_bit_clk + * | | + * | | + * +---------+ | +----------+ | +----+ + * dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0_phy_pll_out_byteclk + * +---------+ | +----------+ | +----+ + * | | + * | | dsi0_pll_by_2_bit_clk + * | | | + * | | +----+ | |\ dsi0_pclk_mux + * | |--| /2 |--o--| \ | + * | | +----+ | \ | +---------+ + * | --------------| |--o--| div_7_4 |-- dsi0_phy_pll_out_dsiclk + * |------------------------------| / +---------+ + * | +-----+ | / + * -----------| /4? |--o----------|/ + * +-----+ | | + * | |dsiclk_sel + * | + * dsi0_pll_post_out_div_clk + */ + +#define DSI_BYTE_PLL_CLK 0 +#define DSI_PIXEL_PLL_CLK 1 +#define NUM_PROVIDED_CLKS 2 + +#define VCO_REF_CLK_RATE 19200000 + +struct dsi_pll_regs { + u32 pll_prop_gain_rate; + u32 pll_lockdet_rate; + u32 decimal_div_start; + u32 frac_div_start_low; + u32 frac_div_start_mid; + u32 frac_div_start_high; + u32 pll_clock_inverters; + u32 ssc_stepsize_low; + u32 ssc_stepsize_high; + u32 ssc_div_per_low; + u32 ssc_div_per_high; + u32 ssc_adjper_low; + u32 ssc_adjper_high; + u32 ssc_control; +}; + +struct dsi_pll_config { + u32 ref_freq; + bool div_override; + u32 output_div; + bool ignore_frac; + bool disable_prescaler; + bool enable_ssc; + bool ssc_center; + u32 dec_bits; + u32 frac_bits; + u32 lock_timer; + u32 ssc_freq; + u32 ssc_offset; + u32 ssc_adj_per; + u32 thresh_cycles; + u32 refclk_cycles; +}; + +struct pll_7nm_cached_state { + unsigned long vco_rate; + u8 bit_clk_div; + u8 pix_clk_div; + u8 pll_out_div; + u8 pll_mux; +}; + +struct dsi_pll_7nm { + struct msm_dsi_pll base; + + int id; + struct platform_device *pdev; + + void __iomem *phy_cmn_mmio; + void __iomem *mmio; + + u64 vco_ref_clk_rate; + u64 vco_current_rate; + + /* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */ + spinlock_t postdiv_lock; + + int vco_delay; + struct dsi_pll_config pll_configuration; + struct dsi_pll_regs reg_setup; + + /* private clocks: */ + struct clk_hw *out_div_clk_hw; + struct clk_hw *bit_clk_hw; + struct clk_hw *byte_clk_hw; + struct clk_hw *by_2_bit_clk_hw; + struct clk_hw *post_out_div_clk_hw; + struct clk_hw *pclk_mux_hw; + struct clk_hw *out_dsiclk_hw; + + /* clock-provider: */ + struct clk_hw_onecell_data *hw_data; + + struct pll_7nm_cached_state cached_state; + + enum msm_dsi_phy_usecase uc; + struct dsi_pll_7nm *slave; +}; + +#define to_pll_7nm(x) container_of(x, struct dsi_pll_7nm, base) + +/* + * Global list of private DSI PLL struct pointers. We need this for Dual DSI + * mode, where the master PLL's clk_ops needs access the slave's private data + */ +static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX]; + +static void dsi_pll_setup_config(struct dsi_pll_7nm *pll) +{ + struct dsi_pll_config *config = &pll->pll_configuration; + + config->ref_freq = pll->vco_ref_clk_rate; + config->output_div = 1; + config->dec_bits = 8; + config->frac_bits = 18; + config->lock_timer = 64; + config->ssc_freq = 31500; + config->ssc_offset = 4800; + config->ssc_adj_per = 2; + config->thresh_cycles = 32; + config->refclk_cycles = 256; + + config->div_override = false; + config->ignore_frac = false; + config->disable_prescaler = false; + + /* TODO: ssc enable */ + config->enable_ssc = false; + config->ssc_center = 0; +} + +static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll) +{ + struct dsi_pll_config *config = &pll->pll_configuration; + struct dsi_pll_regs *regs = &pll->reg_setup; + u64 fref = pll->vco_ref_clk_rate; + u64 pll_freq; + u64 divider; + u64 dec, dec_multiple; + u32 frac; + u64 multiplier; + + pll_freq = pll->vco_current_rate; + + if (config->disable_prescaler) + divider = fref; + else + divider = fref * 2; + + multiplier = 1 << config->frac_bits; + dec_multiple = div_u64(pll_freq * multiplier, divider); + div_u64_rem(dec_multiple, multiplier, &frac); + + dec = div_u64(dec_multiple, multiplier); + + if (pll->base.type != MSM_DSI_PHY_7NM_V4_1) + regs->pll_clock_inverters = 0x28; + else if (pll_freq <= 1000000000ULL) + regs->pll_clock_inverters = 0xa0; + else if (pll_freq <= 2500000000ULL) + regs->pll_clock_inverters = 0x20; + else if (pll_freq <= 3020000000ULL) + regs->pll_clock_inverters = 0x00; + else + regs->pll_clock_inverters = 0x40; + + regs->pll_lockdet_rate = config->lock_timer; + regs->decimal_div_start = dec; + regs->frac_div_start_low = (frac & 0xff); + regs->frac_div_start_mid = (frac & 0xff00) >> 8; + regs->frac_div_start_high = (frac & 0x30000) >> 16; +} + +#define SSC_CENTER BIT(0) +#define SSC_EN BIT(1) + +static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll) +{ + struct dsi_pll_config *config = &pll->pll_configuration; + struct dsi_pll_regs *regs = &pll->reg_setup; + u32 ssc_per; + u32 ssc_mod; + u64 ssc_step_size; + u64 frac; + + if (!config->enable_ssc) { + DBG("SSC not enabled\n"); + return; + } + + ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; + ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); + ssc_per -= ssc_mod; + + frac = regs->frac_div_start_low | + (regs->frac_div_start_mid << 8) | + (regs->frac_div_start_high << 16); + ssc_step_size = regs->decimal_div_start; + ssc_step_size *= (1 << config->frac_bits); + ssc_step_size += frac; + ssc_step_size *= config->ssc_offset; + ssc_step_size *= (config->ssc_adj_per + 1); + ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); + ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); + + regs->ssc_div_per_low = ssc_per & 0xFF; + regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; + regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); + regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); + regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; + regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; + + regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; + + pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", + regs->decimal_div_start, frac, config->frac_bits); + pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", + ssc_per, (u32)ssc_step_size, config->ssc_adj_per); +} + +static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll) +{ + void __iomem *base = pll->mmio; + struct dsi_pll_regs *regs = &pll->reg_setup; + + if (pll->pll_configuration.enable_ssc) { + pr_debug("SSC is enabled\n"); + + pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1, + regs->ssc_stepsize_low); + pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, + regs->ssc_stepsize_high); + pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1, + regs->ssc_div_per_low); + pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1, + regs->ssc_div_per_high); + pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1, + regs->ssc_adjper_low); + pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1, + regs->ssc_adjper_high); + pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL, + SSC_EN | regs->ssc_control); + } +} + +static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll) +{ + void __iomem *base = pll->mmio; + u8 analog_controls_five_1 = 0x01, vco_config_1 = 0x00; + + if (pll->base.type == MSM_DSI_PHY_7NM_V4_1) { + if (pll->vco_current_rate >= 3100000000ULL) + analog_controls_five_1 = 0x03; + + if (pll->vco_current_rate < 1520000000ULL) + vco_config_1 = 0x08; + else if (pll->vco_current_rate < 2990000000ULL) + vco_config_1 = 0x01; + } + + pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1, + analog_controls_five_1); + pll_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1); + pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE, 0x01); + pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03); + pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00); + pll_write(base + REG_DSI_7nm_PHY_PLL_DSM_DIVIDER, 0x00); + pll_write(base + REG_DSI_7nm_PHY_PLL_FEEDBACK_DIVIDER, 0x4e); + pll_write(base + REG_DSI_7nm_PHY_PLL_CALIBRATION_SETTINGS, 0x40); + pll_write(base + REG_DSI_7nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE, 0xba); + pll_write(base + REG_DSI_7nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE, 0x0c); + pll_write(base + REG_DSI_7nm_PHY_PLL_OUTDIV, 0x00); + pll_write(base + REG_DSI_7nm_PHY_PLL_CORE_OVERRIDE, 0x00); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO, 0x08); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_PROP_GAIN_RATE_1, 0x0a); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_BAND_SEL_RATE_1, 0xc0); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0x84); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0x82); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1, 0x4c); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_OVERRIDE, 0x80); + pll_write(base + REG_DSI_7nm_PHY_PLL_PFILT, 0x29); + pll_write(base + REG_DSI_7nm_PHY_PLL_PFILT, 0x2f); + pll_write(base + REG_DSI_7nm_PHY_PLL_IFILT, 0x2a); + pll_write(base + REG_DSI_7nm_PHY_PLL_IFILT, + pll->base.type == MSM_DSI_PHY_7NM_V4_1 ? 0x3f : 0x22); + + if (pll->base.type == MSM_DSI_PHY_7NM_V4_1) { + pll_write(base + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22); + if (pll->slave) + pll_write(pll->slave->mmio + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22); + } +} + +static void dsi_pll_commit(struct dsi_pll_7nm *pll) +{ + void __iomem *base = pll->mmio; + struct dsi_pll_regs *reg = &pll->reg_setup; + + pll_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); + pll_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, reg->decimal_div_start); + pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low); + pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid); + pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, reg->pll_lockdet_rate); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); + pll_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */ + pll_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters); +} + +static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); + + DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->id, rate, + parent_rate); + + pll_7nm->vco_current_rate = rate; + pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; + + dsi_pll_setup_config(pll_7nm); + + dsi_pll_calc_dec_frac(pll_7nm); + + dsi_pll_calc_ssc(pll_7nm); + + dsi_pll_commit(pll_7nm); + + dsi_pll_config_hzindep_reg(pll_7nm); + + dsi_pll_ssc_commit(pll_7nm); + + /* flush, ensure all register writes are done*/ + wmb(); + + return 0; +} + +static int dsi_pll_7nm_lock_status(struct dsi_pll_7nm *pll) +{ + int rc; + u32 status = 0; + u32 const delay_us = 100; + u32 const timeout_us = 5000; + + rc = readl_poll_timeout_atomic(pll->mmio + + REG_DSI_7nm_PHY_PLL_COMMON_STATUS_ONE, + status, + ((status & BIT(0)) > 0), + delay_us, + timeout_us); + if (rc) + pr_err("DSI PLL(%d) lock failed, status=0x%08x\n", + pll->id, status); + + return rc; +} + +static void dsi_pll_disable_pll_bias(struct dsi_pll_7nm *pll) +{ + u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0); + + pll_write(pll->mmio + REG_DSI_7nm_PHY_PLL_SYSTEM_MUXES, 0); + pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0, data & ~BIT(5)); + ndelay(250); +} + +static void dsi_pll_enable_pll_bias(struct dsi_pll_7nm *pll) +{ + u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0); + + pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0, data | BIT(5)); + pll_write(pll->mmio + REG_DSI_7nm_PHY_PLL_SYSTEM_MUXES, 0xc0); + ndelay(250); +} + +static void dsi_pll_disable_global_clk(struct dsi_pll_7nm *pll) +{ + u32 data; + + data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1); + pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1, data & ~BIT(5)); +} + +static void dsi_pll_enable_global_clk(struct dsi_pll_7nm *pll) +{ + u32 data; + + pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_3, 0x04); + + data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1); + pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1, + data | BIT(5) | BIT(4)); +} + +static void dsi_pll_phy_dig_reset(struct dsi_pll_7nm *pll) +{ + /* + * Reset the PHY digital domain. This would be needed when + * coming out of a CX or analog rail power collapse while + * ensuring that the pads maintain LP00 or LP11 state + */ + pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE4, BIT(0)); + wmb(); /* Ensure that the reset is deasserted */ + pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE4, 0x0); + wmb(); /* Ensure that the reset is deasserted */ +} + +static int dsi_pll_7nm_vco_prepare(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); + int rc; + + dsi_pll_enable_pll_bias(pll_7nm); + if (pll_7nm->slave) + dsi_pll_enable_pll_bias(pll_7nm->slave); + + /* Start PLL */ + pll_write(pll_7nm->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_PLL_CNTRL, 0x01); + + /* + * ensure all PLL configurations are written prior to checking + * for PLL lock. + */ + wmb(); + + /* Check for PLL lock */ + rc = dsi_pll_7nm_lock_status(pll_7nm); + if (rc) { + pr_err("PLL(%d) lock failed\n", pll_7nm->id); + goto error; + } + + pll->pll_on = true; + + /* + * assert power on reset for PHY digital in case the PLL is + * enabled after CX of analog domain power collapse. This needs + * to be done before enabling the global clk. + */ + dsi_pll_phy_dig_reset(pll_7nm); + if (pll_7nm->slave) + dsi_pll_phy_dig_reset(pll_7nm->slave); + + dsi_pll_enable_global_clk(pll_7nm); + if (pll_7nm->slave) + dsi_pll_enable_global_clk(pll_7nm->slave); + +error: + return rc; +} + +static void dsi_pll_disable_sub(struct dsi_pll_7nm *pll) +{ + pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_RBUF_CTRL, 0); + dsi_pll_disable_pll_bias(pll); +} + +static void dsi_pll_7nm_vco_unprepare(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); + + /* + * To avoid any stray glitches while abruptly powering down the PLL + * make sure to gate the clock using the clock enable bit before + * powering down the PLL + */ + dsi_pll_disable_global_clk(pll_7nm); + pll_write(pll_7nm->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_PLL_CNTRL, 0); + dsi_pll_disable_sub(pll_7nm); + if (pll_7nm->slave) { + dsi_pll_disable_global_clk(pll_7nm->slave); + dsi_pll_disable_sub(pll_7nm->slave); + } + /* flush, ensure all register writes are done */ + wmb(); + pll->pll_on = false; +} + +static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); + struct dsi_pll_config *config = &pll_7nm->pll_configuration; + void __iomem *base = pll_7nm->mmio; + u64 ref_clk = pll_7nm->vco_ref_clk_rate; + u64 vco_rate = 0x0; + u64 multiplier; + u32 frac; + u32 dec; + u64 pll_freq, tmp64; + + dec = pll_read(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1); + dec &= 0xff; + + frac = pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1); + frac |= ((pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1) & + 0xff) << 8); + frac |= ((pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1) & + 0x3) << 16); + + /* + * TODO: + * 1. Assumes prescaler is disabled + */ + multiplier = 1 << config->frac_bits; + pll_freq = dec * (ref_clk * 2); + tmp64 = (ref_clk * 2 * frac); + pll_freq += div_u64(tmp64, multiplier); + + vco_rate = pll_freq; + + DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x", + pll_7nm->id, (unsigned long)vco_rate, dec, frac); + + return (unsigned long)vco_rate; +} + +static const struct clk_ops clk_ops_dsi_pll_7nm_vco = { + .round_rate = msm_dsi_pll_helper_clk_round_rate, + .set_rate = dsi_pll_7nm_vco_set_rate, + .recalc_rate = dsi_pll_7nm_vco_recalc_rate, + .prepare = dsi_pll_7nm_vco_prepare, + .unprepare = dsi_pll_7nm_vco_unprepare, +}; + +/* + * PLL Callbacks + */ + +static void dsi_pll_7nm_save_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); + struct pll_7nm_cached_state *cached = &pll_7nm->cached_state; + void __iomem *phy_base = pll_7nm->phy_cmn_mmio; + u32 cmn_clk_cfg0, cmn_clk_cfg1; + + cached->pll_out_div = pll_read(pll_7nm->mmio + + REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE); + cached->pll_out_div &= 0x3; + + cmn_clk_cfg0 = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0); + cached->bit_clk_div = cmn_clk_cfg0 & 0xf; + cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4; + + cmn_clk_cfg1 = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1); + cached->pll_mux = cmn_clk_cfg1 & 0x3; + + DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x", + pll_7nm->id, cached->pll_out_div, cached->bit_clk_div, + cached->pix_clk_div, cached->pll_mux); +} + +static int dsi_pll_7nm_restore_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); + struct pll_7nm_cached_state *cached = &pll_7nm->cached_state; + void __iomem *phy_base = pll_7nm->phy_cmn_mmio; + u32 val; + int ret; + + val = pll_read(pll_7nm->mmio + REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE); + val &= ~0x3; + val |= cached->pll_out_div; + pll_write(pll_7nm->mmio + REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE, val); + + pll_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0, + cached->bit_clk_div | (cached->pix_clk_div << 4)); + + val = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1); + val &= ~0x3; + val |= cached->pll_mux; + pll_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val); + + ret = dsi_pll_7nm_vco_set_rate(&pll->clk_hw, pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate); + if (ret) { + DRM_DEV_ERROR(&pll_7nm->pdev->dev, + "restore vco rate failed. ret=%d\n", ret); + return ret; + } + + DBG("DSI PLL%d", pll_7nm->id); + + return 0; +} + +static int dsi_pll_7nm_set_usecase(struct msm_dsi_pll *pll, + enum msm_dsi_phy_usecase uc) +{ + struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); + void __iomem *base = pll_7nm->phy_cmn_mmio; + u32 data = 0x0; /* internal PLL */ + + DBG("DSI PLL%d", pll_7nm->id); + + switch (uc) { + case MSM_DSI_PHY_STANDALONE: + break; + case MSM_DSI_PHY_MASTER: + pll_7nm->slave = pll_7nm_list[(pll_7nm->id + 1) % DSI_MAX]; + break; + case MSM_DSI_PHY_SLAVE: + data = 0x1; /* external PLL */ + break; + default: + return -EINVAL; + } + + /* set PLL src */ + pll_write(base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, (data << 2)); + + pll_7nm->uc = uc; + + return 0; +} + +static int dsi_pll_7nm_get_provider(struct msm_dsi_pll *pll, + struct clk **byte_clk_provider, + struct clk **pixel_clk_provider) +{ + struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); + struct clk_hw_onecell_data *hw_data = pll_7nm->hw_data; + + DBG("DSI PLL%d", pll_7nm->id); + + if (byte_clk_provider) + *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk; + if (pixel_clk_provider) + *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk; + + return 0; +} + +static void dsi_pll_7nm_destroy(struct msm_dsi_pll *pll) +{ + struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); + struct device *dev = &pll_7nm->pdev->dev; + + DBG("DSI PLL%d", pll_7nm->id); + of_clk_del_provider(dev->of_node); + + clk_hw_unregister_divider(pll_7nm->out_dsiclk_hw); + clk_hw_unregister_mux(pll_7nm->pclk_mux_hw); + clk_hw_unregister_fixed_factor(pll_7nm->post_out_div_clk_hw); + clk_hw_unregister_fixed_factor(pll_7nm->by_2_bit_clk_hw); + clk_hw_unregister_fixed_factor(pll_7nm->byte_clk_hw); + clk_hw_unregister_divider(pll_7nm->bit_clk_hw); + clk_hw_unregister_divider(pll_7nm->out_div_clk_hw); + clk_hw_unregister(&pll_7nm->base.clk_hw); +} + +/* + * The post dividers and mux clocks are created using the standard divider and + * mux API. Unlike the 14nm PHY, the slave PLL doesn't need its dividers/mux + * state to follow the master PLL's divider/mux state. Therefore, we don't + * require special clock ops that also configure the slave PLL registers + */ +static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm) +{ + char clk_name[32], parent[32], vco_name[32]; + char parent2[32], parent3[32], parent4[32]; + struct clk_init_data vco_init = { + .parent_names = (const char *[]){ "bi_tcxo" }, + .num_parents = 1, + .name = vco_name, + .flags = CLK_IGNORE_UNUSED, + .ops = &clk_ops_dsi_pll_7nm_vco, + }; + struct device *dev = &pll_7nm->pdev->dev; + struct clk_hw_onecell_data *hw_data; + struct clk_hw *hw; + int ret; + + DBG("DSI%d", pll_7nm->id); + + hw_data = devm_kzalloc(dev, sizeof(*hw_data) + + NUM_PROVIDED_CLKS * sizeof(struct clk_hw *), + GFP_KERNEL); + if (!hw_data) + return -ENOMEM; + + snprintf(vco_name, 32, "dsi%dvco_clk", pll_7nm->id); + pll_7nm->base.clk_hw.init = &vco_init; + + ret = clk_hw_register(dev, &pll_7nm->base.clk_hw); + if (ret) + return ret; + + snprintf(clk_name, 32, "dsi%d_pll_out_div_clk", pll_7nm->id); + snprintf(parent, 32, "dsi%dvco_clk", pll_7nm->id); + + hw = clk_hw_register_divider(dev, clk_name, + parent, CLK_SET_RATE_PARENT, + pll_7nm->mmio + + REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE, + 0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_base_clk_hw; + } + + pll_7nm->out_div_clk_hw = hw; + + snprintf(clk_name, 32, "dsi%d_pll_bit_clk", pll_7nm->id); + snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_7nm->id); + + /* BIT CLK: DIV_CTRL_3_0 */ + hw = clk_hw_register_divider(dev, clk_name, parent, + CLK_SET_RATE_PARENT, + pll_7nm->phy_cmn_mmio + + REG_DSI_7nm_PHY_CMN_CLK_CFG0, + 0, 4, CLK_DIVIDER_ONE_BASED, + &pll_7nm->postdiv_lock); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_out_div_clk_hw; + } + + pll_7nm->bit_clk_hw = hw; + + snprintf(clk_name, 32, "dsi%d_phy_pll_out_byteclk", pll_7nm->id); + snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id); + + /* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */ + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, + CLK_SET_RATE_PARENT, 1, 8); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_bit_clk_hw; + } + + pll_7nm->byte_clk_hw = hw; + hw_data->hws[DSI_BYTE_PLL_CLK] = hw; + + snprintf(clk_name, 32, "dsi%d_pll_by_2_bit_clk", pll_7nm->id); + snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id); + + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, + 0, 1, 2); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_byte_clk_hw; + } + + pll_7nm->by_2_bit_clk_hw = hw; + + snprintf(clk_name, 32, "dsi%d_pll_post_out_div_clk", pll_7nm->id); + snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_7nm->id); + + hw = clk_hw_register_fixed_factor(dev, clk_name, parent, + 0, 1, 4); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_by_2_bit_clk_hw; + } + + pll_7nm->post_out_div_clk_hw = hw; + + snprintf(clk_name, 32, "dsi%d_pclk_mux", pll_7nm->id); + snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id); + snprintf(parent2, 32, "dsi%d_pll_by_2_bit_clk", pll_7nm->id); + snprintf(parent3, 32, "dsi%d_pll_out_div_clk", pll_7nm->id); + snprintf(parent4, 32, "dsi%d_pll_post_out_div_clk", pll_7nm->id); + + hw = clk_hw_register_mux(dev, clk_name, + ((const char *[]){ + parent, parent2, parent3, parent4 + }), 4, 0, pll_7nm->phy_cmn_mmio + + REG_DSI_7nm_PHY_CMN_CLK_CFG1, + 0, 2, 0, NULL); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_post_out_div_clk_hw; + } + + pll_7nm->pclk_mux_hw = hw; + + snprintf(clk_name, 32, "dsi%d_phy_pll_out_dsiclk", pll_7nm->id); + snprintf(parent, 32, "dsi%d_pclk_mux", pll_7nm->id); + + /* PIX CLK DIV : DIV_CTRL_7_4*/ + hw = clk_hw_register_divider(dev, clk_name, parent, + 0, pll_7nm->phy_cmn_mmio + + REG_DSI_7nm_PHY_CMN_CLK_CFG0, + 4, 4, CLK_DIVIDER_ONE_BASED, + &pll_7nm->postdiv_lock); + if (IS_ERR(hw)) { + ret = PTR_ERR(hw); + goto err_pclk_mux_hw; + } + + pll_7nm->out_dsiclk_hw = hw; + hw_data->hws[DSI_PIXEL_PLL_CLK] = hw; + + hw_data->num = NUM_PROVIDED_CLKS; + pll_7nm->hw_data = hw_data; + + ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, + pll_7nm->hw_data); + if (ret) { + DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret); + goto err_dsiclk_hw; + } + + return 0; + +err_dsiclk_hw: + clk_hw_unregister_divider(pll_7nm->out_dsiclk_hw); +err_pclk_mux_hw: + clk_hw_unregister_mux(pll_7nm->pclk_mux_hw); +err_post_out_div_clk_hw: + clk_hw_unregister_fixed_factor(pll_7nm->post_out_div_clk_hw); +err_by_2_bit_clk_hw: + clk_hw_unregister_fixed_factor(pll_7nm->by_2_bit_clk_hw); +err_byte_clk_hw: + clk_hw_unregister_fixed_factor(pll_7nm->byte_clk_hw); +err_bit_clk_hw: + clk_hw_unregister_divider(pll_7nm->bit_clk_hw); +err_out_div_clk_hw: + clk_hw_unregister_divider(pll_7nm->out_div_clk_hw); +err_base_clk_hw: + clk_hw_unregister(&pll_7nm->base.clk_hw); + + return ret; +} + +struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, + enum msm_dsi_phy_type type, int id) +{ + struct dsi_pll_7nm *pll_7nm; + struct msm_dsi_pll *pll; + int ret; + + pll_7nm = devm_kzalloc(&pdev->dev, sizeof(*pll_7nm), GFP_KERNEL); + if (!pll_7nm) + return ERR_PTR(-ENOMEM); + + DBG("DSI PLL%d", id); + + pll_7nm->pdev = pdev; + pll_7nm->id = id; + pll_7nm_list[id] = pll_7nm; + + pll_7nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY"); + if (IS_ERR_OR_NULL(pll_7nm->phy_cmn_mmio)) { + DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n"); + return ERR_PTR(-ENOMEM); + } + + pll_7nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); + if (IS_ERR_OR_NULL(pll_7nm->mmio)) { + DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n"); + return ERR_PTR(-ENOMEM); + } + + spin_lock_init(&pll_7nm->postdiv_lock); + + pll = &pll_7nm->base; + pll->min_rate = 1000000000UL; + pll->max_rate = 3500000000UL; + if (type == MSM_DSI_PHY_7NM_V4_1) { + pll->min_rate = 600000000UL; + pll->max_rate = (unsigned long)5000000000ULL; + /* workaround for max rate overflowing on 32-bit builds: */ + pll->max_rate = max(pll->max_rate, 0xffffffffUL); + } + pll->get_provider = dsi_pll_7nm_get_provider; + pll->destroy = dsi_pll_7nm_destroy; + pll->save_state = dsi_pll_7nm_save_state; + pll->restore_state = dsi_pll_7nm_restore_state; + pll->set_usecase = dsi_pll_7nm_set_usecase; + + pll_7nm->vco_delay = 1; + + ret = pll_7nm_register(pll_7nm); + if (ret) { + DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); + return ERR_PTR(ret); + } + + /* TODO: Remove this when we have proper display handover support */ + msm_dsi_pll_save_state(pll); + + return pll; +} + static int dsi_phy_hw_v4_0_is_pll_on(struct msm_dsi_phy *phy) { void __iomem *base = phy->base; diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.c similarity index 100% rename from drivers/gpu/drm/msm/dsi/pll/dsi_pll.c rename to drivers/gpu/drm/msm/dsi/phy/dsi_pll.c diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h b/drivers/gpu/drm/msm/dsi/phy/dsi_pll.h similarity index 100% rename from drivers/gpu/drm/msm/dsi/pll/dsi_pll.h rename to drivers/gpu/drm/msm/dsi/phy/dsi_pll.h diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c deleted file mode 100644 index de3b802ccd3d..000000000000 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c +++ /dev/null @@ -1,881 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0 - * Copyright (c) 2018, The Linux Foundation - */ - -#include -#include -#include - -#include "dsi_pll.h" -#include "dsi.xml.h" - -/* - * DSI PLL 10nm - clock diagram (eg: DSI0): - * - * dsi0_pll_out_div_clk dsi0_pll_bit_clk - * | | - * | | - * +---------+ | +----------+ | +----+ - * dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0_phy_pll_out_byteclk - * +---------+ | +----------+ | +----+ - * | | - * | | dsi0_pll_by_2_bit_clk - * | | | - * | | +----+ | |\ dsi0_pclk_mux - * | |--| /2 |--o--| \ | - * | | +----+ | \ | +---------+ - * | --------------| |--o--| div_7_4 |-- dsi0_phy_pll_out_dsiclk - * |------------------------------| / +---------+ - * | +-----+ | / - * -----------| /4? |--o----------|/ - * +-----+ | | - * | |dsiclk_sel - * | - * dsi0_pll_post_out_div_clk - */ - -#define DSI_BYTE_PLL_CLK 0 -#define DSI_PIXEL_PLL_CLK 1 -#define NUM_PROVIDED_CLKS 2 - -#define VCO_REF_CLK_RATE 19200000 - -struct dsi_pll_regs { - u32 pll_prop_gain_rate; - u32 pll_lockdet_rate; - u32 decimal_div_start; - u32 frac_div_start_low; - u32 frac_div_start_mid; - u32 frac_div_start_high; - u32 pll_clock_inverters; - u32 ssc_stepsize_low; - u32 ssc_stepsize_high; - u32 ssc_div_per_low; - u32 ssc_div_per_high; - u32 ssc_adjper_low; - u32 ssc_adjper_high; - u32 ssc_control; -}; - -struct dsi_pll_config { - u32 ref_freq; - bool div_override; - u32 output_div; - bool ignore_frac; - bool disable_prescaler; - bool enable_ssc; - bool ssc_center; - u32 dec_bits; - u32 frac_bits; - u32 lock_timer; - u32 ssc_freq; - u32 ssc_offset; - u32 ssc_adj_per; - u32 thresh_cycles; - u32 refclk_cycles; -}; - -struct pll_10nm_cached_state { - unsigned long vco_rate; - u8 bit_clk_div; - u8 pix_clk_div; - u8 pll_out_div; - u8 pll_mux; -}; - -struct dsi_pll_10nm { - struct msm_dsi_pll base; - - int id; - struct platform_device *pdev; - - void __iomem *phy_cmn_mmio; - void __iomem *mmio; - - u64 vco_ref_clk_rate; - u64 vco_current_rate; - - /* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */ - spinlock_t postdiv_lock; - - int vco_delay; - struct dsi_pll_config pll_configuration; - struct dsi_pll_regs reg_setup; - - /* private clocks: */ - struct clk_hw *out_div_clk_hw; - struct clk_hw *bit_clk_hw; - struct clk_hw *byte_clk_hw; - struct clk_hw *by_2_bit_clk_hw; - struct clk_hw *post_out_div_clk_hw; - struct clk_hw *pclk_mux_hw; - struct clk_hw *out_dsiclk_hw; - - /* clock-provider: */ - struct clk_hw_onecell_data *hw_data; - - struct pll_10nm_cached_state cached_state; - - enum msm_dsi_phy_usecase uc; - struct dsi_pll_10nm *slave; -}; - -#define to_pll_10nm(x) container_of(x, struct dsi_pll_10nm, base) - -/* - * Global list of private DSI PLL struct pointers. We need this for Dual DSI - * mode, where the master PLL's clk_ops needs access the slave's private data - */ -static struct dsi_pll_10nm *pll_10nm_list[DSI_MAX]; - -static void dsi_pll_setup_config(struct dsi_pll_10nm *pll) -{ - struct dsi_pll_config *config = &pll->pll_configuration; - - config->ref_freq = pll->vco_ref_clk_rate; - config->output_div = 1; - config->dec_bits = 8; - config->frac_bits = 18; - config->lock_timer = 64; - config->ssc_freq = 31500; - config->ssc_offset = 5000; - config->ssc_adj_per = 2; - config->thresh_cycles = 32; - config->refclk_cycles = 256; - - config->div_override = false; - config->ignore_frac = false; - config->disable_prescaler = false; - - config->enable_ssc = false; - config->ssc_center = 0; -} - -static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll) -{ - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; - u64 fref = pll->vco_ref_clk_rate; - u64 pll_freq; - u64 divider; - u64 dec, dec_multiple; - u32 frac; - u64 multiplier; - - pll_freq = pll->vco_current_rate; - - if (config->disable_prescaler) - divider = fref; - else - divider = fref * 2; - - multiplier = 1 << config->frac_bits; - dec_multiple = div_u64(pll_freq * multiplier, divider); - dec = div_u64_rem(dec_multiple, multiplier, &frac); - - if (pll_freq <= 1900000000UL) - regs->pll_prop_gain_rate = 8; - else if (pll_freq <= 3000000000UL) - regs->pll_prop_gain_rate = 10; - else - regs->pll_prop_gain_rate = 12; - if (pll_freq < 1100000000UL) - regs->pll_clock_inverters = 8; - else - regs->pll_clock_inverters = 0; - - regs->pll_lockdet_rate = config->lock_timer; - regs->decimal_div_start = dec; - regs->frac_div_start_low = (frac & 0xff); - regs->frac_div_start_mid = (frac & 0xff00) >> 8; - regs->frac_div_start_high = (frac & 0x30000) >> 16; -} - -#define SSC_CENTER BIT(0) -#define SSC_EN BIT(1) - -static void dsi_pll_calc_ssc(struct dsi_pll_10nm *pll) -{ - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; - u32 ssc_per; - u32 ssc_mod; - u64 ssc_step_size; - u64 frac; - - if (!config->enable_ssc) { - DBG("SSC not enabled\n"); - return; - } - - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; - ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); - ssc_per -= ssc_mod; - - frac = regs->frac_div_start_low | - (regs->frac_div_start_mid << 8) | - (regs->frac_div_start_high << 16); - ssc_step_size = regs->decimal_div_start; - ssc_step_size *= (1 << config->frac_bits); - ssc_step_size += frac; - ssc_step_size *= config->ssc_offset; - ssc_step_size *= (config->ssc_adj_per + 1); - ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); - ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); - - regs->ssc_div_per_low = ssc_per & 0xFF; - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; - - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; - - pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", - regs->decimal_div_start, frac, config->frac_bits); - pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", - ssc_per, (u32)ssc_step_size, config->ssc_adj_per); -} - -static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll) -{ - void __iomem *base = pll->mmio; - struct dsi_pll_regs *regs = &pll->reg_setup; - - if (pll->pll_configuration.enable_ssc) { - pr_debug("SSC is enabled\n"); - - pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_LOW_1, - regs->ssc_stepsize_low); - pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, - regs->ssc_stepsize_high); - pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_LOW_1, - regs->ssc_div_per_low); - pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_PER_HIGH_1, - regs->ssc_div_per_high); - pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_LOW_1, - regs->ssc_adjper_low); - pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_DIV_ADJPER_HIGH_1, - regs->ssc_adjper_high); - pll_write(base + REG_DSI_10nm_PHY_PLL_SSC_CONTROL, - SSC_EN | regs->ssc_control); - } -} - -static void dsi_pll_config_hzindep_reg(struct dsi_pll_10nm *pll) -{ - void __iomem *base = pll->mmio; - - pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_ONE, 0x80); - pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03); - pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00); - pll_write(base + REG_DSI_10nm_PHY_PLL_DSM_DIVIDER, 0x00); - pll_write(base + REG_DSI_10nm_PHY_PLL_FEEDBACK_DIVIDER, 0x4e); - pll_write(base + REG_DSI_10nm_PHY_PLL_CALIBRATION_SETTINGS, 0x40); - pll_write(base + REG_DSI_10nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE, - 0xba); - pll_write(base + REG_DSI_10nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE, 0x0c); - pll_write(base + REG_DSI_10nm_PHY_PLL_OUTDIV, 0x00); - pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_OVERRIDE, 0x00); - pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO, 0x08); - pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_PROP_GAIN_RATE_1, 0x08); - pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_BAND_SET_RATE_1, 0xc0); - pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0xfa); - pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1, - 0x4c); - pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_OVERRIDE, 0x80); - pll_write(base + REG_DSI_10nm_PHY_PLL_PFILT, 0x29); - pll_write(base + REG_DSI_10nm_PHY_PLL_IFILT, 0x3f); -} - -static void dsi_pll_commit(struct dsi_pll_10nm *pll) -{ - void __iomem *base = pll->mmio; - struct dsi_pll_regs *reg = &pll->reg_setup; - - pll_write(base + REG_DSI_10nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); - pll_write(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1, - reg->decimal_div_start); - pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1, - reg->frac_div_start_low); - pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1, - reg->frac_div_start_mid); - pll_write(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1, - reg->frac_div_start_high); - pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCKDET_RATE_1, - reg->pll_lockdet_rate); - pll_write(base + REG_DSI_10nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); - pll_write(base + REG_DSI_10nm_PHY_PLL_CMODE, 0x10); - pll_write(base + REG_DSI_10nm_PHY_PLL_CLOCK_INVERTERS, - reg->pll_clock_inverters); -} - -static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); - - DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_10nm->id, rate, - parent_rate); - - pll_10nm->vco_current_rate = rate; - pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; - - dsi_pll_setup_config(pll_10nm); - - dsi_pll_calc_dec_frac(pll_10nm); - - dsi_pll_calc_ssc(pll_10nm); - - dsi_pll_commit(pll_10nm); - - dsi_pll_config_hzindep_reg(pll_10nm); - - dsi_pll_ssc_commit(pll_10nm); - - /* flush, ensure all register writes are done*/ - wmb(); - - return 0; -} - -static int dsi_pll_10nm_lock_status(struct dsi_pll_10nm *pll) -{ - struct device *dev = &pll->pdev->dev; - int rc; - u32 status = 0; - u32 const delay_us = 100; - u32 const timeout_us = 5000; - - rc = readl_poll_timeout_atomic(pll->mmio + - REG_DSI_10nm_PHY_PLL_COMMON_STATUS_ONE, - status, - ((status & BIT(0)) > 0), - delay_us, - timeout_us); - if (rc) - DRM_DEV_ERROR(dev, "DSI PLL(%d) lock failed, status=0x%08x\n", - pll->id, status); - - return rc; -} - -static void dsi_pll_disable_pll_bias(struct dsi_pll_10nm *pll) -{ - u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0); - - pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0); - pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0, - data & ~BIT(5)); - ndelay(250); -} - -static void dsi_pll_enable_pll_bias(struct dsi_pll_10nm *pll) -{ - u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0); - - pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CTRL_0, - data | BIT(5)); - pll_write(pll->mmio + REG_DSI_10nm_PHY_PLL_SYSTEM_MUXES, 0xc0); - ndelay(250); -} - -static void dsi_pll_disable_global_clk(struct dsi_pll_10nm *pll) -{ - u32 data; - - data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1); - pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1, - data & ~BIT(5)); -} - -static void dsi_pll_enable_global_clk(struct dsi_pll_10nm *pll) -{ - u32 data; - - data = pll_read(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1); - pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_CLK_CFG1, - data | BIT(5)); -} - -static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); - struct device *dev = &pll_10nm->pdev->dev; - int rc; - - dsi_pll_enable_pll_bias(pll_10nm); - if (pll_10nm->slave) - dsi_pll_enable_pll_bias(pll_10nm->slave); - - rc = dsi_pll_10nm_vco_set_rate(hw,pll_10nm->vco_current_rate, 0); - if (rc) { - DRM_DEV_ERROR(dev, "vco_set_rate failed, rc=%d\n", rc); - return rc; - } - - /* Start PLL */ - pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, - 0x01); - - /* - * ensure all PLL configurations are written prior to checking - * for PLL lock. - */ - wmb(); - - /* Check for PLL lock */ - rc = dsi_pll_10nm_lock_status(pll_10nm); - if (rc) { - DRM_DEV_ERROR(dev, "PLL(%d) lock failed\n", pll_10nm->id); - goto error; - } - - pll->pll_on = true; - - dsi_pll_enable_global_clk(pll_10nm); - if (pll_10nm->slave) - dsi_pll_enable_global_clk(pll_10nm->slave); - - pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, - 0x01); - if (pll_10nm->slave) - pll_write(pll_10nm->slave->phy_cmn_mmio + - REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0x01); - -error: - return rc; -} - -static void dsi_pll_disable_sub(struct dsi_pll_10nm *pll) -{ - pll_write(pll->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0); - dsi_pll_disable_pll_bias(pll); -} - -static void dsi_pll_10nm_vco_unprepare(struct clk_hw *hw) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); - - /* - * To avoid any stray glitches while abruptly powering down the PLL - * make sure to gate the clock using the clock enable bit before - * powering down the PLL - */ - dsi_pll_disable_global_clk(pll_10nm); - pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0); - dsi_pll_disable_sub(pll_10nm); - if (pll_10nm->slave) { - dsi_pll_disable_global_clk(pll_10nm->slave); - dsi_pll_disable_sub(pll_10nm->slave); - } - /* flush, ensure all register writes are done */ - wmb(); - pll->pll_on = false; -} - -static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); - struct dsi_pll_config *config = &pll_10nm->pll_configuration; - void __iomem *base = pll_10nm->mmio; - u64 ref_clk = pll_10nm->vco_ref_clk_rate; - u64 vco_rate = 0x0; - u64 multiplier; - u32 frac; - u32 dec; - u64 pll_freq, tmp64; - - dec = pll_read(base + REG_DSI_10nm_PHY_PLL_DECIMAL_DIV_START_1); - dec &= 0xff; - - frac = pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_LOW_1); - frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_MID_1) & - 0xff) << 8); - frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1) & - 0x3) << 16); - - /* - * TODO: - * 1. Assumes prescaler is disabled - */ - multiplier = 1 << config->frac_bits; - pll_freq = dec * (ref_clk * 2); - tmp64 = (ref_clk * 2 * frac); - pll_freq += div_u64(tmp64, multiplier); - - vco_rate = pll_freq; - - DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x", - pll_10nm->id, (unsigned long)vco_rate, dec, frac); - - return (unsigned long)vco_rate; -} - -static const struct clk_ops clk_ops_dsi_pll_10nm_vco = { - .round_rate = msm_dsi_pll_helper_clk_round_rate, - .set_rate = dsi_pll_10nm_vco_set_rate, - .recalc_rate = dsi_pll_10nm_vco_recalc_rate, - .prepare = dsi_pll_10nm_vco_prepare, - .unprepare = dsi_pll_10nm_vco_unprepare, -}; - -/* - * PLL Callbacks - */ - -static void dsi_pll_10nm_save_state(struct msm_dsi_pll *pll) -{ - struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); - struct pll_10nm_cached_state *cached = &pll_10nm->cached_state; - void __iomem *phy_base = pll_10nm->phy_cmn_mmio; - u32 cmn_clk_cfg0, cmn_clk_cfg1; - - cached->pll_out_div = pll_read(pll_10nm->mmio + - REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE); - cached->pll_out_div &= 0x3; - - cmn_clk_cfg0 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0); - cached->bit_clk_div = cmn_clk_cfg0 & 0xf; - cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4; - - cmn_clk_cfg1 = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1); - cached->pll_mux = cmn_clk_cfg1 & 0x3; - - DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x", - pll_10nm->id, cached->pll_out_div, cached->bit_clk_div, - cached->pix_clk_div, cached->pll_mux); -} - -static int dsi_pll_10nm_restore_state(struct msm_dsi_pll *pll) -{ - struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); - struct pll_10nm_cached_state *cached = &pll_10nm->cached_state; - void __iomem *phy_base = pll_10nm->phy_cmn_mmio; - u32 val; - int ret; - - val = pll_read(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE); - val &= ~0x3; - val |= cached->pll_out_div; - pll_write(pll_10nm->mmio + REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE, val); - - pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG0, - cached->bit_clk_div | (cached->pix_clk_div << 4)); - - val = pll_read(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1); - val &= ~0x3; - val |= cached->pll_mux; - pll_write(phy_base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, val); - - ret = dsi_pll_10nm_vco_set_rate(&pll->clk_hw, pll_10nm->vco_current_rate, pll_10nm->vco_ref_clk_rate); - if (ret) { - DRM_DEV_ERROR(&pll_10nm->pdev->dev, - "restore vco rate failed. ret=%d\n", ret); - return ret; - } - - DBG("DSI PLL%d", pll_10nm->id); - - return 0; -} - -static int dsi_pll_10nm_set_usecase(struct msm_dsi_pll *pll, - enum msm_dsi_phy_usecase uc) -{ - struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); - void __iomem *base = pll_10nm->phy_cmn_mmio; - u32 data = 0x0; /* internal PLL */ - - DBG("DSI PLL%d", pll_10nm->id); - - switch (uc) { - case MSM_DSI_PHY_STANDALONE: - break; - case MSM_DSI_PHY_MASTER: - pll_10nm->slave = pll_10nm_list[(pll_10nm->id + 1) % DSI_MAX]; - break; - case MSM_DSI_PHY_SLAVE: - data = 0x1; /* external PLL */ - break; - default: - return -EINVAL; - } - - /* set PLL src */ - pll_write(base + REG_DSI_10nm_PHY_CMN_CLK_CFG1, (data << 2)); - - pll_10nm->uc = uc; - - return 0; -} - -static int dsi_pll_10nm_get_provider(struct msm_dsi_pll *pll, - struct clk **byte_clk_provider, - struct clk **pixel_clk_provider) -{ - struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); - struct clk_hw_onecell_data *hw_data = pll_10nm->hw_data; - - DBG("DSI PLL%d", pll_10nm->id); - - if (byte_clk_provider) - *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk; - if (pixel_clk_provider) - *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk; - - return 0; -} - -static void dsi_pll_10nm_destroy(struct msm_dsi_pll *pll) -{ - struct dsi_pll_10nm *pll_10nm = to_pll_10nm(pll); - struct device *dev = &pll_10nm->pdev->dev; - - DBG("DSI PLL%d", pll_10nm->id); - of_clk_del_provider(dev->of_node); - - clk_hw_unregister_divider(pll_10nm->out_dsiclk_hw); - clk_hw_unregister_mux(pll_10nm->pclk_mux_hw); - clk_hw_unregister_fixed_factor(pll_10nm->post_out_div_clk_hw); - clk_hw_unregister_fixed_factor(pll_10nm->by_2_bit_clk_hw); - clk_hw_unregister_fixed_factor(pll_10nm->byte_clk_hw); - clk_hw_unregister_divider(pll_10nm->bit_clk_hw); - clk_hw_unregister_divider(pll_10nm->out_div_clk_hw); - clk_hw_unregister(&pll_10nm->base.clk_hw); -} - -/* - * The post dividers and mux clocks are created using the standard divider and - * mux API. Unlike the 14nm PHY, the slave PLL doesn't need its dividers/mux - * state to follow the master PLL's divider/mux state. Therefore, we don't - * require special clock ops that also configure the slave PLL registers - */ -static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm) -{ - char clk_name[32], parent[32], vco_name[32]; - char parent2[32], parent3[32], parent4[32]; - struct clk_init_data vco_init = { - .parent_names = (const char *[]){ "xo" }, - .num_parents = 1, - .name = vco_name, - .flags = CLK_IGNORE_UNUSED, - .ops = &clk_ops_dsi_pll_10nm_vco, - }; - struct device *dev = &pll_10nm->pdev->dev; - struct clk_hw_onecell_data *hw_data; - struct clk_hw *hw; - int ret; - - DBG("DSI%d", pll_10nm->id); - - hw_data = devm_kzalloc(dev, sizeof(*hw_data) + - NUM_PROVIDED_CLKS * sizeof(struct clk_hw *), - GFP_KERNEL); - if (!hw_data) - return -ENOMEM; - - snprintf(vco_name, 32, "dsi%dvco_clk", pll_10nm->id); - pll_10nm->base.clk_hw.init = &vco_init; - - ret = clk_hw_register(dev, &pll_10nm->base.clk_hw); - if (ret) - return ret; - - snprintf(clk_name, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); - snprintf(parent, 32, "dsi%dvco_clk", pll_10nm->id); - - hw = clk_hw_register_divider(dev, clk_name, - parent, CLK_SET_RATE_PARENT, - pll_10nm->mmio + - REG_DSI_10nm_PHY_PLL_PLL_OUTDIV_RATE, - 0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_base_clk_hw; - } - - pll_10nm->out_div_clk_hw = hw; - - snprintf(clk_name, 32, "dsi%d_pll_bit_clk", pll_10nm->id); - snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); - - /* BIT CLK: DIV_CTRL_3_0 */ - hw = clk_hw_register_divider(dev, clk_name, parent, - CLK_SET_RATE_PARENT, - pll_10nm->phy_cmn_mmio + - REG_DSI_10nm_PHY_CMN_CLK_CFG0, - 0, 4, CLK_DIVIDER_ONE_BASED, - &pll_10nm->postdiv_lock); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_out_div_clk_hw; - } - - pll_10nm->bit_clk_hw = hw; - - snprintf(clk_name, 32, "dsi%d_phy_pll_out_byteclk", pll_10nm->id); - snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id); - - /* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */ - hw = clk_hw_register_fixed_factor(dev, clk_name, parent, - CLK_SET_RATE_PARENT, 1, 8); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_bit_clk_hw; - } - - pll_10nm->byte_clk_hw = hw; - hw_data->hws[DSI_BYTE_PLL_CLK] = hw; - - snprintf(clk_name, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id); - snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id); - - hw = clk_hw_register_fixed_factor(dev, clk_name, parent, - 0, 1, 2); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_byte_clk_hw; - } - - pll_10nm->by_2_bit_clk_hw = hw; - - snprintf(clk_name, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id); - snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); - - hw = clk_hw_register_fixed_factor(dev, clk_name, parent, - 0, 1, 4); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_by_2_bit_clk_hw; - } - - pll_10nm->post_out_div_clk_hw = hw; - - snprintf(clk_name, 32, "dsi%d_pclk_mux", pll_10nm->id); - snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_10nm->id); - snprintf(parent2, 32, "dsi%d_pll_by_2_bit_clk", pll_10nm->id); - snprintf(parent3, 32, "dsi%d_pll_out_div_clk", pll_10nm->id); - snprintf(parent4, 32, "dsi%d_pll_post_out_div_clk", pll_10nm->id); - - hw = clk_hw_register_mux(dev, clk_name, - ((const char *[]){ - parent, parent2, parent3, parent4 - }), 4, 0, pll_10nm->phy_cmn_mmio + - REG_DSI_10nm_PHY_CMN_CLK_CFG1, - 0, 2, 0, NULL); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_post_out_div_clk_hw; - } - - pll_10nm->pclk_mux_hw = hw; - - snprintf(clk_name, 32, "dsi%d_phy_pll_out_dsiclk", pll_10nm->id); - snprintf(parent, 32, "dsi%d_pclk_mux", pll_10nm->id); - - /* PIX CLK DIV : DIV_CTRL_7_4*/ - hw = clk_hw_register_divider(dev, clk_name, parent, - 0, pll_10nm->phy_cmn_mmio + - REG_DSI_10nm_PHY_CMN_CLK_CFG0, - 4, 4, CLK_DIVIDER_ONE_BASED, - &pll_10nm->postdiv_lock); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_pclk_mux_hw; - } - - pll_10nm->out_dsiclk_hw = hw; - hw_data->hws[DSI_PIXEL_PLL_CLK] = hw; - - hw_data->num = NUM_PROVIDED_CLKS; - pll_10nm->hw_data = hw_data; - - ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, - pll_10nm->hw_data); - if (ret) { - DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret); - goto err_dsiclk_hw; - } - - return 0; - -err_dsiclk_hw: - clk_hw_unregister_divider(pll_10nm->out_dsiclk_hw); -err_pclk_mux_hw: - clk_hw_unregister_mux(pll_10nm->pclk_mux_hw); -err_post_out_div_clk_hw: - clk_hw_unregister_fixed_factor(pll_10nm->post_out_div_clk_hw); -err_by_2_bit_clk_hw: - clk_hw_unregister_fixed_factor(pll_10nm->by_2_bit_clk_hw); -err_byte_clk_hw: - clk_hw_unregister_fixed_factor(pll_10nm->byte_clk_hw); -err_bit_clk_hw: - clk_hw_unregister_divider(pll_10nm->bit_clk_hw); -err_out_div_clk_hw: - clk_hw_unregister_divider(pll_10nm->out_div_clk_hw); -err_base_clk_hw: - clk_hw_unregister(&pll_10nm->base.clk_hw); - - return ret; -} - -struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id) -{ - struct dsi_pll_10nm *pll_10nm; - struct msm_dsi_pll *pll; - int ret; - - pll_10nm = devm_kzalloc(&pdev->dev, sizeof(*pll_10nm), GFP_KERNEL); - if (!pll_10nm) - return ERR_PTR(-ENOMEM); - - DBG("DSI PLL%d", id); - - pll_10nm->pdev = pdev; - pll_10nm->id = id; - pll_10nm_list[id] = pll_10nm; - - pll_10nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY"); - if (IS_ERR_OR_NULL(pll_10nm->phy_cmn_mmio)) { - DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n"); - return ERR_PTR(-ENOMEM); - } - - pll_10nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); - if (IS_ERR_OR_NULL(pll_10nm->mmio)) { - DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n"); - return ERR_PTR(-ENOMEM); - } - - spin_lock_init(&pll_10nm->postdiv_lock); - - pll = &pll_10nm->base; - pll->min_rate = 1000000000UL; - pll->max_rate = 3500000000UL; - pll->get_provider = dsi_pll_10nm_get_provider; - pll->destroy = dsi_pll_10nm_destroy; - pll->save_state = dsi_pll_10nm_save_state; - pll->restore_state = dsi_pll_10nm_restore_state; - pll->set_usecase = dsi_pll_10nm_set_usecase; - - pll_10nm->vco_delay = 1; - - ret = pll_10nm_register(pll_10nm); - if (ret) { - DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); - return ERR_PTR(ret); - } - - /* TODO: Remove this when we have proper display handover support */ - msm_dsi_pll_save_state(pll); - - return pll; -} diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c deleted file mode 100644 index f847376d501e..000000000000 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c +++ /dev/null @@ -1,1096 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2016, The Linux Foundation. All rights reserved. - */ - -#include -#include - -#include "dsi_pll.h" -#include "dsi.xml.h" - -/* - * DSI PLL 14nm - clock diagram (eg: DSI0): - * - * dsi0n1_postdiv_clk - * | - * | - * +----+ | +----+ - * dsi0vco_clk ---| n1 |--o--| /8 |-- dsi0pllbyte - * +----+ | +----+ - * | dsi0n1_postdivby2_clk - * | +----+ | - * o---| /2 |--o--|\ - * | +----+ | \ +----+ - * | | |--| n2 |-- dsi0pll - * o--------------| / +----+ - * |/ - */ - -#define POLL_MAX_READS 15 -#define POLL_TIMEOUT_US 1000 - -#define NUM_PROVIDED_CLKS 2 - -#define VCO_REF_CLK_RATE 19200000 -#define VCO_MIN_RATE 1300000000UL -#define VCO_MAX_RATE 2600000000UL - -#define DSI_BYTE_PLL_CLK 0 -#define DSI_PIXEL_PLL_CLK 1 - -#define DSI_PLL_DEFAULT_VCO_POSTDIV 1 - -struct dsi_pll_input { - u32 fref; /* reference clk */ - u32 fdata; /* bit clock rate */ - u32 dsiclk_sel; /* Mux configuration (see diagram) */ - u32 ssc_en; /* SSC enable/disable */ - u32 ldo_en; - - /* fixed params */ - u32 refclk_dbler_en; - u32 vco_measure_time; - u32 kvco_measure_time; - u32 bandgap_timer; - u32 pll_wakeup_timer; - u32 plllock_cnt; - u32 plllock_rng; - u32 ssc_center; - u32 ssc_adj_period; - u32 ssc_spread; - u32 ssc_freq; - u32 pll_ie_trim; - u32 pll_ip_trim; - u32 pll_iptat_trim; - u32 pll_cpcset_cur; - u32 pll_cpmset_cur; - - u32 pll_icpmset; - u32 pll_icpcset; - - u32 pll_icpmset_p; - u32 pll_icpmset_m; - - u32 pll_icpcset_p; - u32 pll_icpcset_m; - - u32 pll_lpf_res1; - u32 pll_lpf_cap1; - u32 pll_lpf_cap2; - u32 pll_c3ctrl; - u32 pll_r3ctrl; -}; - -struct dsi_pll_output { - u32 pll_txclk_en; - u32 dec_start; - u32 div_frac_start; - u32 ssc_period; - u32 ssc_step_size; - u32 plllock_cmp; - u32 pll_vco_div_ref; - u32 pll_vco_count; - u32 pll_kvco_div_ref; - u32 pll_kvco_count; - u32 pll_misc1; - u32 pll_lpf2_postdiv; - u32 pll_resetsm_cntrl; - u32 pll_resetsm_cntrl2; - u32 pll_resetsm_cntrl5; - u32 pll_kvco_code; - - u32 cmn_clk_cfg0; - u32 cmn_clk_cfg1; - u32 cmn_ldo_cntrl; - - u32 pll_postdiv; - u32 fcvo; -}; - -struct pll_14nm_cached_state { - unsigned long vco_rate; - u8 n2postdiv; - u8 n1postdiv; -}; - -struct dsi_pll_14nm { - struct msm_dsi_pll base; - - int id; - struct platform_device *pdev; - - void __iomem *phy_cmn_mmio; - void __iomem *mmio; - - int vco_delay; - - struct dsi_pll_input in; - struct dsi_pll_output out; - - /* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */ - spinlock_t postdiv_lock; - - u64 vco_current_rate; - u64 vco_ref_clk_rate; - - /* private clocks: */ - struct clk_hw *hws[NUM_DSI_CLOCKS_MAX]; - u32 num_hws; - - /* clock-provider: */ - struct clk_hw_onecell_data *hw_data; - - struct pll_14nm_cached_state cached_state; - - enum msm_dsi_phy_usecase uc; - struct dsi_pll_14nm *slave; -}; - -#define to_pll_14nm(x) container_of(x, struct dsi_pll_14nm, base) - -/* - * Private struct for N1/N2 post-divider clocks. These clocks are similar to - * the generic clk_divider class of clocks. The only difference is that it - * also sets the slave DSI PLL's post-dividers if in Dual DSI mode - */ -struct dsi_pll_14nm_postdiv { - struct clk_hw hw; - - /* divider params */ - u8 shift; - u8 width; - u8 flags; /* same flags as used by clk_divider struct */ - - struct dsi_pll_14nm *pll; -}; - -#define to_pll_14nm_postdiv(_hw) container_of(_hw, struct dsi_pll_14nm_postdiv, hw) - -/* - * Global list of private DSI PLL struct pointers. We need this for Dual DSI - * mode, where the master PLL's clk_ops needs access the slave's private data - */ -static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX]; - -static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, - u32 nb_tries, u32 timeout_us) -{ - bool pll_locked = false; - void __iomem *base = pll_14nm->mmio; - u32 tries, val; - - tries = nb_tries; - while (tries--) { - val = pll_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); - pll_locked = !!(val & BIT(5)); - - if (pll_locked) - break; - - udelay(timeout_us); - } - - if (!pll_locked) { - tries = nb_tries; - while (tries--) { - val = pll_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); - pll_locked = !!(val & BIT(0)); - - if (pll_locked) - break; - - udelay(timeout_us); - } - } - - DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); - - return pll_locked; -} - -static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll) -{ - pll->in.fref = pll->vco_ref_clk_rate; - pll->in.fdata = 0; - pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */ - pll->in.ldo_en = 0; /* disabled for now */ - - /* fixed input */ - pll->in.refclk_dbler_en = 0; - pll->in.vco_measure_time = 5; - pll->in.kvco_measure_time = 5; - pll->in.bandgap_timer = 4; - pll->in.pll_wakeup_timer = 5; - pll->in.plllock_cnt = 1; - pll->in.plllock_rng = 0; - - /* - * SSC is enabled by default. We might need DT props for configuring - * some SSC params like PPM and center/down spread etc. - */ - pll->in.ssc_en = 1; - pll->in.ssc_center = 0; /* down spread by default */ - pll->in.ssc_spread = 5; /* PPM / 1000 */ - pll->in.ssc_freq = 31500; /* default recommended */ - pll->in.ssc_adj_period = 37; - - pll->in.pll_ie_trim = 4; - pll->in.pll_ip_trim = 4; - pll->in.pll_cpcset_cur = 1; - pll->in.pll_cpmset_cur = 1; - pll->in.pll_icpmset = 4; - pll->in.pll_icpcset = 4; - pll->in.pll_icpmset_p = 0; - pll->in.pll_icpmset_m = 0; - pll->in.pll_icpcset_p = 0; - pll->in.pll_icpcset_m = 0; - pll->in.pll_lpf_res1 = 3; - pll->in.pll_lpf_cap1 = 11; - pll->in.pll_lpf_cap2 = 1; - pll->in.pll_iptat_trim = 7; - pll->in.pll_c3ctrl = 2; - pll->in.pll_r3ctrl = 1; -} - -#define CEIL(x, y) (((x) + ((y) - 1)) / (y)) - -static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll) -{ - u32 period, ssc_period; - u32 ref, rem; - u64 step_size; - - DBG("vco=%lld ref=%lld", pll->vco_current_rate, pll->vco_ref_clk_rate); - - ssc_period = pll->in.ssc_freq / 500; - period = (u32)pll->vco_ref_clk_rate / 1000; - ssc_period = CEIL(period, ssc_period); - ssc_period -= 1; - pll->out.ssc_period = ssc_period; - - DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq, - pll->in.ssc_spread, pll->out.ssc_period); - - step_size = (u32)pll->vco_current_rate; - ref = pll->vco_ref_clk_rate; - ref /= 1000; - step_size = div_u64(step_size, ref); - step_size <<= 20; - step_size = div_u64(step_size, 1000); - step_size *= pll->in.ssc_spread; - step_size = div_u64(step_size, 1000); - step_size *= (pll->in.ssc_adj_period + 1); - - rem = 0; - step_size = div_u64_rem(step_size, ssc_period + 1, &rem); - if (rem) - step_size++; - - DBG("step_size=%lld", step_size); - - step_size &= 0x0ffff; /* take lower 16 bits */ - - pll->out.ssc_step_size = step_size; -} - -static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll) -{ - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; - u64 multiplier = BIT(20); - u64 dec_start_multiple, dec_start, pll_comp_val; - u32 duration, div_frac_start; - u64 vco_clk_rate = pll->vco_current_rate; - u64 fref = pll->vco_ref_clk_rate; - - DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref); - - dec_start_multiple = div_u64(vco_clk_rate * multiplier, fref); - div_u64_rem(dec_start_multiple, multiplier, &div_frac_start); - - dec_start = div_u64(dec_start_multiple, multiplier); - - pout->dec_start = (u32)dec_start; - pout->div_frac_start = div_frac_start; - - if (pin->plllock_cnt == 0) - duration = 1024; - else if (pin->plllock_cnt == 1) - duration = 256; - else if (pin->plllock_cnt == 2) - duration = 128; - else - duration = 32; - - pll_comp_val = duration * dec_start_multiple; - pll_comp_val = div_u64(pll_comp_val, multiplier); - do_div(pll_comp_val, 10); - - pout->plllock_cmp = (u32)pll_comp_val; - - pout->pll_txclk_en = 1; - pout->cmn_ldo_cntrl = 0x3c; -} - -static u32 pll_14nm_kvco_slop(u32 vrate) -{ - u32 slop = 0; - - if (vrate > VCO_MIN_RATE && vrate <= 1800000000UL) - slop = 600; - else if (vrate > 1800000000UL && vrate < 2300000000UL) - slop = 400; - else if (vrate > 2300000000UL && vrate < VCO_MAX_RATE) - slop = 280; - - return slop; -} - -static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll) -{ - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; - u64 vco_clk_rate = pll->vco_current_rate; - u64 fref = pll->vco_ref_clk_rate; - u64 data; - u32 cnt; - - data = fref * pin->vco_measure_time; - do_div(data, 1000000); - data &= 0x03ff; /* 10 bits */ - data -= 2; - pout->pll_vco_div_ref = data; - - data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */ - data *= pin->vco_measure_time; - do_div(data, 10); - pout->pll_vco_count = data; - - data = fref * pin->kvco_measure_time; - do_div(data, 1000000); - data &= 0x03ff; /* 10 bits */ - data -= 1; - pout->pll_kvco_div_ref = data; - - cnt = pll_14nm_kvco_slop(vco_clk_rate); - cnt *= 2; - cnt /= 100; - cnt *= pin->kvco_measure_time; - pout->pll_kvco_count = cnt; - - pout->pll_misc1 = 16; - pout->pll_resetsm_cntrl = 48; - pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3; - pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer; - pout->pll_kvco_code = 0; -} - -static void pll_db_commit_ssc(struct dsi_pll_14nm *pll) -{ - void __iomem *base = pll->mmio; - struct dsi_pll_input *pin = &pll->in; - struct dsi_pll_output *pout = &pll->out; - u8 data; - - data = pin->ssc_adj_period; - data &= 0x0ff; - pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data); - data = (pin->ssc_adj_period >> 8); - data &= 0x03; - pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data); - - data = pout->ssc_period; - data &= 0x0ff; - pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data); - data = (pout->ssc_period >> 8); - data &= 0x0ff; - pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data); - - data = pout->ssc_step_size; - data &= 0x0ff; - pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data); - data = (pout->ssc_step_size >> 8); - data &= 0x0ff; - pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data); - - data = (pin->ssc_center & 0x01); - data <<= 1; - data |= 0x01; /* enable */ - pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data); - - wmb(); /* make sure register committed */ -} - -static void pll_db_commit_common(struct dsi_pll_14nm *pll, - struct dsi_pll_input *pin, - struct dsi_pll_output *pout) -{ - void __iomem *base = pll->mmio; - u8 data; - - /* confgiure the non frequency dependent pll registers */ - data = 0; - pll_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data); - - data = pout->pll_txclk_en; - pll_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data); - - data = pout->pll_resetsm_cntrl; - pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data); - data = pout->pll_resetsm_cntrl2; - pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data); - data = pout->pll_resetsm_cntrl5; - pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data); - - data = pout->pll_vco_div_ref & 0xff; - pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data); - data = (pout->pll_vco_div_ref >> 8) & 0x3; - pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data); - - data = pout->pll_kvco_div_ref & 0xff; - pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data); - data = (pout->pll_kvco_div_ref >> 8) & 0x3; - pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data); - - data = pout->pll_misc1; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data); - - data = pin->pll_ie_trim; - pll_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data); - - data = pin->pll_ip_trim; - pll_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data); - - data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur; - pll_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data); - - data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data); - - data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data); - - data = pin->pll_icpmset << 3 | pin->pll_icpcset; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data); - - data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data); - - data = pin->pll_iptat_trim; - pll_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data); - - data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data); -} - -static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm) -{ - void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; - - /* de assert pll start and apply pll sw reset */ - - /* stop pll */ - pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0); - - /* pll sw reset */ - pll_write_udelay(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x20, 10); - wmb(); /* make sure register committed */ - - pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0); - wmb(); /* make sure register committed */ -} - -static void pll_db_commit_14nm(struct dsi_pll_14nm *pll, - struct dsi_pll_input *pin, - struct dsi_pll_output *pout) -{ - void __iomem *base = pll->mmio; - void __iomem *cmn_base = pll->phy_cmn_mmio; - u8 data; - - DBG("DSI%d PLL", pll->id); - - data = pout->cmn_ldo_cntrl; - pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data); - - pll_db_commit_common(pll, pin, pout); - - pll_14nm_software_reset(pll); - - data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */ - pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data); - - data = 0xff; /* data, clk, pll normal operation */ - pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data); - - /* configure the frequency dependent pll registers */ - data = pout->dec_start; - pll_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data); - - data = pout->div_frac_start & 0xff; - pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data); - data = (pout->div_frac_start >> 8) & 0xff; - pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data); - data = (pout->div_frac_start >> 16) & 0xf; - pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data); - - data = pout->plllock_cmp & 0xff; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data); - - data = (pout->plllock_cmp >> 8) & 0xff; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data); - - data = (pout->plllock_cmp >> 16) & 0x3; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data); - - data = pin->plllock_cnt << 1 | pin->plllock_rng << 3; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data); - - data = pout->pll_vco_count & 0xff; - pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data); - data = (pout->pll_vco_count >> 8) & 0xff; - pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data); - - data = pout->pll_kvco_count & 0xff; - pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data); - data = (pout->pll_kvco_count >> 8) & 0x3; - pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data); - - data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1; - pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data); - - if (pin->ssc_en) - pll_db_commit_ssc(pll); - - wmb(); /* make sure register committed */ -} - -/* - * VCO clock Callbacks - */ -static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); - struct dsi_pll_input *pin = &pll_14nm->in; - struct dsi_pll_output *pout = &pll_14nm->out; - - DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->id, rate, - parent_rate); - - pll_14nm->vco_current_rate = rate; - pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; - - dsi_pll_14nm_input_init(pll_14nm); - - /* - * This configures the post divider internal to the VCO. It's - * fixed to divide by 1 for now. - * - * tx_band = pll_postdiv. - * 0: divided by 1 - * 1: divided by 2 - * 2: divided by 4 - * 3: divided by 8 - */ - pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV; - - pll_14nm_dec_frac_calc(pll_14nm); - - if (pin->ssc_en) - pll_14nm_ssc_calc(pll_14nm); - - pll_14nm_calc_vco_count(pll_14nm); - - /* commit the slave DSI PLL registers if we're master. Note that we - * don't lock the slave PLL. We just ensure that the PLL/PHY registers - * of the master and slave are identical - */ - if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { - struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; - - pll_db_commit_14nm(pll_14nm_slave, pin, pout); - } - - pll_db_commit_14nm(pll_14nm, pin, pout); - - return 0; -} - -static unsigned long dsi_pll_14nm_vco_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); - void __iomem *base = pll_14nm->mmio; - u64 vco_rate, multiplier = BIT(20); - u32 div_frac_start; - u32 dec_start; - u64 ref_clk = parent_rate; - - dec_start = pll_read(base + REG_DSI_14nm_PHY_PLL_DEC_START); - dec_start &= 0x0ff; - - DBG("dec_start = %x", dec_start); - - div_frac_start = (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3) - & 0xf) << 16; - div_frac_start |= (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2) - & 0xff) << 8; - div_frac_start |= pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1) - & 0xff; - - DBG("div_frac_start = %x", div_frac_start); - - vco_rate = ref_clk * dec_start; - - vco_rate += ((ref_clk * div_frac_start) / multiplier); - - /* - * Recalculating the rate from dec_start and frac_start doesn't end up - * the rate we originally set. Convert the freq to KHz, round it up and - * convert it back to MHz. - */ - vco_rate = DIV_ROUND_UP_ULL(vco_rate, 1000) * 1000; - - DBG("returning vco rate = %lu", (unsigned long)vco_rate); - - return (unsigned long)vco_rate; -} - -static const struct clk_ops clk_ops_dsi_pll_14nm_vco = { - .round_rate = msm_dsi_pll_helper_clk_round_rate, - .set_rate = dsi_pll_14nm_vco_set_rate, - .recalc_rate = dsi_pll_14nm_vco_recalc_rate, - .prepare = msm_dsi_pll_helper_clk_prepare, - .unprepare = msm_dsi_pll_helper_clk_unprepare, -}; - -/* - * N1 and N2 post-divider clock callbacks - */ -#define div_mask(width) ((1 << (width)) - 1) -static unsigned long dsi_pll_14nm_postdiv_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw); - struct dsi_pll_14nm *pll_14nm = postdiv->pll; - void __iomem *base = pll_14nm->phy_cmn_mmio; - u8 shift = postdiv->shift; - u8 width = postdiv->width; - u32 val; - - DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, parent_rate); - - val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0) >> shift; - val &= div_mask(width); - - return divider_recalc_rate(hw, parent_rate, val, NULL, - postdiv->flags, width); -} - -static long dsi_pll_14nm_postdiv_round_rate(struct clk_hw *hw, - unsigned long rate, - unsigned long *prate) -{ - struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw); - struct dsi_pll_14nm *pll_14nm = postdiv->pll; - - DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, rate); - - return divider_round_rate(hw, rate, prate, NULL, - postdiv->width, - postdiv->flags); -} - -static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw); - struct dsi_pll_14nm *pll_14nm = postdiv->pll; - void __iomem *base = pll_14nm->phy_cmn_mmio; - spinlock_t *lock = &pll_14nm->postdiv_lock; - u8 shift = postdiv->shift; - u8 width = postdiv->width; - unsigned int value; - unsigned long flags = 0; - u32 val; - - DBG("DSI%d PLL parent rate=%lu parent rate %lu", pll_14nm->id, rate, - parent_rate); - - value = divider_get_val(rate, parent_rate, NULL, postdiv->width, - postdiv->flags); - - spin_lock_irqsave(lock, flags); - - val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0); - val &= ~(div_mask(width) << shift); - - val |= value << shift; - pll_write(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val); - - /* If we're master in dual DSI mode, then the slave PLL's post-dividers - * follow the master's post dividers - */ - if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { - struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; - void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio; - - pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val); - } - - spin_unlock_irqrestore(lock, flags); - - return 0; -} - -static const struct clk_ops clk_ops_dsi_pll_14nm_postdiv = { - .recalc_rate = dsi_pll_14nm_postdiv_recalc_rate, - .round_rate = dsi_pll_14nm_postdiv_round_rate, - .set_rate = dsi_pll_14nm_postdiv_set_rate, -}; - -/* - * PLL Callbacks - */ - -static int dsi_pll_14nm_enable_seq(struct msm_dsi_pll *pll) -{ - struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); - void __iomem *base = pll_14nm->mmio; - void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; - bool locked; - - DBG(""); - - pll_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10); - pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1); - - locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS, - POLL_TIMEOUT_US); - - if (unlikely(!locked)) - DRM_DEV_ERROR(&pll_14nm->pdev->dev, "DSI PLL lock failed\n"); - else - DBG("DSI PLL lock success"); - - return locked ? 0 : -EINVAL; -} - -static void dsi_pll_14nm_disable_seq(struct msm_dsi_pll *pll) -{ - struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); - void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; - - DBG(""); - - pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0); -} - -static void dsi_pll_14nm_save_state(struct msm_dsi_pll *pll) -{ - struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); - struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state; - void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; - u32 data; - - data = pll_read(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0); - - cached_state->n1postdiv = data & 0xf; - cached_state->n2postdiv = (data >> 4) & 0xf; - - DBG("DSI%d PLL save state %x %x", pll_14nm->id, - cached_state->n1postdiv, cached_state->n2postdiv); - - cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw); -} - -static int dsi_pll_14nm_restore_state(struct msm_dsi_pll *pll) -{ - struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); - struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state; - void __iomem *cmn_base = pll_14nm->phy_cmn_mmio; - u32 data; - int ret; - - ret = dsi_pll_14nm_vco_set_rate(&pll->clk_hw, - cached_state->vco_rate, 0); - if (ret) { - DRM_DEV_ERROR(&pll_14nm->pdev->dev, - "restore vco rate failed. ret=%d\n", ret); - return ret; - } - - data = cached_state->n1postdiv | (cached_state->n2postdiv << 4); - - DBG("DSI%d PLL restore state %x %x", pll_14nm->id, - cached_state->n1postdiv, cached_state->n2postdiv); - - pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data); - - /* also restore post-dividers for slave DSI PLL */ - if (pll_14nm->uc == MSM_DSI_PHY_MASTER) { - struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave; - void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio; - - pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data); - } - - return 0; -} - -static int dsi_pll_14nm_set_usecase(struct msm_dsi_pll *pll, - enum msm_dsi_phy_usecase uc) -{ - struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); - void __iomem *base = pll_14nm->mmio; - u32 clkbuflr_en, bandgap = 0; - - switch (uc) { - case MSM_DSI_PHY_STANDALONE: - clkbuflr_en = 0x1; - break; - case MSM_DSI_PHY_MASTER: - clkbuflr_en = 0x3; - pll_14nm->slave = pll_14nm_list[(pll_14nm->id + 1) % DSI_MAX]; - break; - case MSM_DSI_PHY_SLAVE: - clkbuflr_en = 0x0; - bandgap = 0x3; - break; - default: - return -EINVAL; - } - - pll_write(base + REG_DSI_14nm_PHY_PLL_CLKBUFLR_EN, clkbuflr_en); - if (bandgap) - pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_BANDGAP, bandgap); - - pll_14nm->uc = uc; - - return 0; -} - -static int dsi_pll_14nm_get_provider(struct msm_dsi_pll *pll, - struct clk **byte_clk_provider, - struct clk **pixel_clk_provider) -{ - struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); - struct clk_hw_onecell_data *hw_data = pll_14nm->hw_data; - - if (byte_clk_provider) - *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk; - if (pixel_clk_provider) - *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk; - - return 0; -} - -static void dsi_pll_14nm_destroy(struct msm_dsi_pll *pll) -{ - struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll); - struct platform_device *pdev = pll_14nm->pdev; - int num_hws = pll_14nm->num_hws; - - of_clk_del_provider(pdev->dev.of_node); - - while (num_hws--) - clk_hw_unregister(pll_14nm->hws[num_hws]); -} - -static struct clk_hw *pll_14nm_postdiv_register(struct dsi_pll_14nm *pll_14nm, - const char *name, - const char *parent_name, - unsigned long flags, - u8 shift) -{ - struct dsi_pll_14nm_postdiv *pll_postdiv; - struct device *dev = &pll_14nm->pdev->dev; - struct clk_init_data postdiv_init = { - .parent_names = (const char *[]) { parent_name }, - .num_parents = 1, - .name = name, - .flags = flags, - .ops = &clk_ops_dsi_pll_14nm_postdiv, - }; - int ret; - - pll_postdiv = devm_kzalloc(dev, sizeof(*pll_postdiv), GFP_KERNEL); - if (!pll_postdiv) - return ERR_PTR(-ENOMEM); - - pll_postdiv->pll = pll_14nm; - pll_postdiv->shift = shift; - /* both N1 and N2 postdividers are 4 bits wide */ - pll_postdiv->width = 4; - /* range of each divider is from 1 to 15 */ - pll_postdiv->flags = CLK_DIVIDER_ONE_BASED; - pll_postdiv->hw.init = &postdiv_init; - - ret = clk_hw_register(dev, &pll_postdiv->hw); - if (ret) - return ERR_PTR(ret); - - return &pll_postdiv->hw; -} - -static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm) -{ - char clk_name[32], parent[32], vco_name[32]; - struct clk_init_data vco_init = { - .parent_names = (const char *[]){ "xo" }, - .num_parents = 1, - .name = vco_name, - .flags = CLK_IGNORE_UNUSED, - .ops = &clk_ops_dsi_pll_14nm_vco, - }; - struct device *dev = &pll_14nm->pdev->dev; - struct clk_hw **hws = pll_14nm->hws; - struct clk_hw_onecell_data *hw_data; - struct clk_hw *hw; - int num = 0; - int ret; - - DBG("DSI%d", pll_14nm->id); - - hw_data = devm_kzalloc(dev, sizeof(*hw_data) + - NUM_PROVIDED_CLKS * sizeof(struct clk_hw *), - GFP_KERNEL); - if (!hw_data) - return -ENOMEM; - - snprintf(vco_name, 32, "dsi%dvco_clk", pll_14nm->id); - pll_14nm->base.clk_hw.init = &vco_init; - - ret = clk_hw_register(dev, &pll_14nm->base.clk_hw); - if (ret) - return ret; - - hws[num++] = &pll_14nm->base.clk_hw; - - snprintf(clk_name, 32, "dsi%dn1_postdiv_clk", pll_14nm->id); - snprintf(parent, 32, "dsi%dvco_clk", pll_14nm->id); - - /* N1 postdiv, bits 0-3 in REG_DSI_14nm_PHY_CMN_CLK_CFG0 */ - hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent, - CLK_SET_RATE_PARENT, 0); - if (IS_ERR(hw)) - return PTR_ERR(hw); - - hws[num++] = hw; - - snprintf(clk_name, 32, "dsi%dpllbyte", pll_14nm->id); - snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id); - - /* DSI Byte clock = VCO_CLK / N1 / 8 */ - hw = clk_hw_register_fixed_factor(dev, clk_name, parent, - CLK_SET_RATE_PARENT, 1, 8); - if (IS_ERR(hw)) - return PTR_ERR(hw); - - hws[num++] = hw; - hw_data->hws[DSI_BYTE_PLL_CLK] = hw; - - snprintf(clk_name, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id); - snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id); - - /* - * Skip the mux for now, force DSICLK_SEL to 1, Add a /2 divider - * on the way. Don't let it set parent. - */ - hw = clk_hw_register_fixed_factor(dev, clk_name, parent, 0, 1, 2); - if (IS_ERR(hw)) - return PTR_ERR(hw); - - hws[num++] = hw; - - snprintf(clk_name, 32, "dsi%dpll", pll_14nm->id); - snprintf(parent, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id); - - /* DSI pixel clock = VCO_CLK / N1 / 2 / N2 - * This is the output of N2 post-divider, bits 4-7 in - * REG_DSI_14nm_PHY_CMN_CLK_CFG0. Don't let it set parent. - */ - hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent, 0, 4); - if (IS_ERR(hw)) - return PTR_ERR(hw); - - hws[num++] = hw; - hw_data->hws[DSI_PIXEL_PLL_CLK] = hw; - - pll_14nm->num_hws = num; - - hw_data->num = NUM_PROVIDED_CLKS; - pll_14nm->hw_data = hw_data; - - ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, - pll_14nm->hw_data); - if (ret) { - DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret); - return ret; - } - - return 0; -} - -struct msm_dsi_pll *msm_dsi_pll_14nm_init(struct platform_device *pdev, int id) -{ - struct dsi_pll_14nm *pll_14nm; - struct msm_dsi_pll *pll; - int ret; - - if (!pdev) - return ERR_PTR(-ENODEV); - - pll_14nm = devm_kzalloc(&pdev->dev, sizeof(*pll_14nm), GFP_KERNEL); - if (!pll_14nm) - return ERR_PTR(-ENOMEM); - - DBG("PLL%d", id); - - pll_14nm->pdev = pdev; - pll_14nm->id = id; - pll_14nm_list[id] = pll_14nm; - - pll_14nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY"); - if (IS_ERR_OR_NULL(pll_14nm->phy_cmn_mmio)) { - DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n"); - return ERR_PTR(-ENOMEM); - } - - pll_14nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); - if (IS_ERR_OR_NULL(pll_14nm->mmio)) { - DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n"); - return ERR_PTR(-ENOMEM); - } - - spin_lock_init(&pll_14nm->postdiv_lock); - - pll = &pll_14nm->base; - pll->min_rate = VCO_MIN_RATE; - pll->max_rate = VCO_MAX_RATE; - pll->get_provider = dsi_pll_14nm_get_provider; - pll->destroy = dsi_pll_14nm_destroy; - pll->disable_seq = dsi_pll_14nm_disable_seq; - pll->save_state = dsi_pll_14nm_save_state; - pll->restore_state = dsi_pll_14nm_restore_state; - pll->set_usecase = dsi_pll_14nm_set_usecase; - - pll_14nm->vco_delay = 1; - - pll->en_seq_cnt = 1; - pll->enable_seqs[0] = dsi_pll_14nm_enable_seq; - - ret = pll_14nm_register(pll_14nm); - if (ret) { - DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); - return ERR_PTR(ret); - } - - return pll; -} diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c deleted file mode 100644 index 37a1f996a588..000000000000 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c +++ /dev/null @@ -1,643 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. - */ - -#include -#include - -#include "dsi_pll.h" -#include "dsi.xml.h" - -/* - * DSI PLL 28nm - clock diagram (eg: DSI0): - * - * dsi0analog_postdiv_clk - * | dsi0indirect_path_div2_clk - * | | - * +------+ | +----+ | |\ dsi0byte_mux - * dsi0vco_clk --o--| DIV1 |--o--| /2 |--o--| \ | - * | +------+ +----+ | m| | +----+ - * | | u|--o--| /4 |-- dsi0pllbyte - * | | x| +----+ - * o--------------------------| / - * | |/ - * | +------+ - * o----------| DIV3 |------------------------- dsi0pll - * +------+ - */ - -#define POLL_MAX_READS 10 -#define POLL_TIMEOUT_US 50 - -#define NUM_PROVIDED_CLKS 2 - -#define VCO_REF_CLK_RATE 19200000 -#define VCO_MIN_RATE 350000000 -#define VCO_MAX_RATE 750000000 - -#define DSI_BYTE_PLL_CLK 0 -#define DSI_PIXEL_PLL_CLK 1 - -#define LPFR_LUT_SIZE 10 -struct lpfr_cfg { - unsigned long vco_rate; - u32 resistance; -}; - -/* Loop filter resistance: */ -static const struct lpfr_cfg lpfr_lut[LPFR_LUT_SIZE] = { - { 479500000, 8 }, - { 480000000, 11 }, - { 575500000, 8 }, - { 576000000, 12 }, - { 610500000, 8 }, - { 659500000, 9 }, - { 671500000, 10 }, - { 672000000, 14 }, - { 708500000, 10 }, - { 750000000, 11 }, -}; - -struct pll_28nm_cached_state { - unsigned long vco_rate; - u8 postdiv3; - u8 postdiv1; - u8 byte_mux; -}; - -struct dsi_pll_28nm { - struct msm_dsi_pll base; - - int id; - struct platform_device *pdev; - void __iomem *mmio; - - int vco_delay; - - /* private clocks: */ - struct clk *clks[NUM_DSI_CLOCKS_MAX]; - u32 num_clks; - - /* clock-provider: */ - struct clk *provided_clks[NUM_PROVIDED_CLKS]; - struct clk_onecell_data clk_data; - - struct pll_28nm_cached_state cached_state; -}; - -#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base) - -static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm, - u32 nb_tries, u32 timeout_us) -{ - bool pll_locked = false; - u32 val; - - while (nb_tries--) { - val = pll_read(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_STATUS); - pll_locked = !!(val & DSI_28nm_PHY_PLL_STATUS_PLL_RDY); - - if (pll_locked) - break; - - udelay(timeout_us); - } - DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); - - return pll_locked; -} - -static void pll_28nm_software_reset(struct dsi_pll_28nm *pll_28nm) -{ - void __iomem *base = pll_28nm->mmio; - - /* - * Add HW recommended delays after toggling the software - * reset bit off and back on. - */ - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, - DSI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET, 1); - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, 0x00, 1); -} - -/* - * Clock Callbacks - */ -static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - struct device *dev = &pll_28nm->pdev->dev; - void __iomem *base = pll_28nm->mmio; - unsigned long div_fbx1000, gen_vco_clk; - u32 refclk_cfg, frac_n_mode, frac_n_value; - u32 sdm_cfg0, sdm_cfg1, sdm_cfg2, sdm_cfg3; - u32 cal_cfg10, cal_cfg11; - u32 rem; - int i; - - VERB("rate=%lu, parent's=%lu", rate, parent_rate); - - /* Force postdiv2 to be div-4 */ - pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV2_CFG, 3); - - /* Configure the Loop filter resistance */ - for (i = 0; i < LPFR_LUT_SIZE; i++) - if (rate <= lpfr_lut[i].vco_rate) - break; - if (i == LPFR_LUT_SIZE) { - DRM_DEV_ERROR(dev, "unable to get loop filter resistance. vco=%lu\n", - rate); - return -EINVAL; - } - pll_write(base + REG_DSI_28nm_PHY_PLL_LPFR_CFG, lpfr_lut[i].resistance); - - /* Loop filter capacitance values : c1 and c2 */ - pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC1_CFG, 0x70); - pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC2_CFG, 0x15); - - rem = rate % VCO_REF_CLK_RATE; - if (rem) { - refclk_cfg = DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR; - frac_n_mode = 1; - div_fbx1000 = rate / (VCO_REF_CLK_RATE / 500); - gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 500); - } else { - refclk_cfg = 0x0; - frac_n_mode = 0; - div_fbx1000 = rate / (VCO_REF_CLK_RATE / 1000); - gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 1000); - } - - DBG("refclk_cfg = %d", refclk_cfg); - - rem = div_fbx1000 % 1000; - frac_n_value = (rem << 16) / 1000; - - DBG("div_fb = %lu", div_fbx1000); - DBG("frac_n_value = %d", frac_n_value); - - DBG("Generated VCO Clock: %lu", gen_vco_clk); - rem = 0; - sdm_cfg1 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1); - sdm_cfg1 &= ~DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK; - if (frac_n_mode) { - sdm_cfg0 = 0x0; - sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(0); - sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET( - (u32)(((div_fbx1000 / 1000) & 0x3f) - 1)); - sdm_cfg3 = frac_n_value >> 8; - sdm_cfg2 = frac_n_value & 0xff; - } else { - sdm_cfg0 = DSI_28nm_PHY_PLL_SDM_CFG0_BYP; - sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV( - (u32)(((div_fbx1000 / 1000) & 0x3f) - 1)); - sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(0); - sdm_cfg2 = 0; - sdm_cfg3 = 0; - } - - DBG("sdm_cfg0=%d", sdm_cfg0); - DBG("sdm_cfg1=%d", sdm_cfg1); - DBG("sdm_cfg2=%d", sdm_cfg2); - DBG("sdm_cfg3=%d", sdm_cfg3); - - cal_cfg11 = (u32)(gen_vco_clk / (256 * 1000000)); - cal_cfg10 = (u32)((gen_vco_clk % (256 * 1000000)) / 1000000); - DBG("cal_cfg10=%d, cal_cfg11=%d", cal_cfg10, cal_cfg11); - - pll_write(base + REG_DSI_28nm_PHY_PLL_CHGPUMP_CFG, 0x02); - pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG3, 0x2b); - pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG4, 0x06); - pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); - - pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1, sdm_cfg1); - pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2, - DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0(sdm_cfg2)); - pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3, - DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8(sdm_cfg3)); - pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG4, 0x00); - - /* Add hardware recommended delay for correct PLL configuration */ - if (pll_28nm->vco_delay) - udelay(pll_28nm->vco_delay); - - pll_write(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG, refclk_cfg); - pll_write(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00); - pll_write(base + REG_DSI_28nm_PHY_PLL_VCOLPF_CFG, 0x31); - pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0, sdm_cfg0); - pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG0, 0x12); - pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG6, 0x30); - pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG7, 0x00); - pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG8, 0x60); - pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG9, 0x00); - pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG10, cal_cfg10 & 0xff); - pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG11, cal_cfg11 & 0xff); - pll_write(base + REG_DSI_28nm_PHY_PLL_EFUSE_CFG, 0x20); - - return 0; -} - -static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - - return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS, - POLL_TIMEOUT_US); -} - -static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - void __iomem *base = pll_28nm->mmio; - u32 sdm0, doubler, sdm_byp_div; - u32 sdm_dc_off, sdm_freq_seed, sdm2, sdm3; - u32 ref_clk = VCO_REF_CLK_RATE; - unsigned long vco_rate; - - VERB("parent_rate=%lu", parent_rate); - - /* Check to see if the ref clk doubler is enabled */ - doubler = pll_read(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG) & - DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR; - ref_clk += (doubler * VCO_REF_CLK_RATE); - - /* see if it is integer mode or sdm mode */ - sdm0 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0); - if (sdm0 & DSI_28nm_PHY_PLL_SDM_CFG0_BYP) { - /* integer mode */ - sdm_byp_div = FIELD( - pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0), - DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV) + 1; - vco_rate = ref_clk * sdm_byp_div; - } else { - /* sdm mode */ - sdm_dc_off = FIELD( - pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1), - DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET); - DBG("sdm_dc_off = %d", sdm_dc_off); - sdm2 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2), - DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0); - sdm3 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3), - DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8); - sdm_freq_seed = (sdm3 << 8) | sdm2; - DBG("sdm_freq_seed = %d", sdm_freq_seed); - - vco_rate = (ref_clk * (sdm_dc_off + 1)) + - mult_frac(ref_clk, sdm_freq_seed, BIT(16)); - DBG("vco rate = %lu", vco_rate); - } - - DBG("returning vco rate = %lu", vco_rate); - - return vco_rate; -} - -static const struct clk_ops clk_ops_dsi_pll_28nm_vco = { - .round_rate = msm_dsi_pll_helper_clk_round_rate, - .set_rate = dsi_pll_28nm_clk_set_rate, - .recalc_rate = dsi_pll_28nm_clk_recalc_rate, - .prepare = msm_dsi_pll_helper_clk_prepare, - .unprepare = msm_dsi_pll_helper_clk_unprepare, - .is_enabled = dsi_pll_28nm_clk_is_enabled, -}; - -/* - * PLL Callbacks - */ -static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - struct device *dev = &pll_28nm->pdev->dev; - void __iomem *base = pll_28nm->mmio; - u32 max_reads = 5, timeout_us = 100; - bool locked; - u32 val; - int i; - - DBG("id=%d", pll_28nm->id); - - pll_28nm_software_reset(pll_28nm); - - /* - * PLL power up sequence. - * Add necessary delays recommended by hardware. - */ - val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1); - - val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); - - val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); - - val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); - - for (i = 0; i < 2; i++) { - /* DSI Uniphy lock detect setting */ - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, - 0x0c, 100); - pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); - - /* poll for PLL ready status */ - locked = pll_28nm_poll_for_ready(pll_28nm, - max_reads, timeout_us); - if (locked) - break; - - pll_28nm_software_reset(pll_28nm); - - /* - * PLL power up sequence. - * Add necessary delays recommended by hardware. - */ - val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1); - - val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); - - val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 250); - - val &= ~DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); - - val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); - - val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); - } - - if (unlikely(!locked)) - DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); - else - DBG("DSI PLL Lock success"); - - return locked ? 0 : -EINVAL; -} - -static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - struct device *dev = &pll_28nm->pdev->dev; - void __iomem *base = pll_28nm->mmio; - bool locked; - u32 max_reads = 10, timeout_us = 50; - u32 val; - - DBG("id=%d", pll_28nm->id); - - pll_28nm_software_reset(pll_28nm); - - /* - * PLL power up sequence. - * Add necessary delays recommended by hardware. - */ - pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34, 500); - - val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; - pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); - - val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; - pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); - - val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B | - DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; - pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); - - /* DSI PLL toggle lock detect setting */ - pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x04, 500); - pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x05, 512); - - locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us); - - if (unlikely(!locked)) - DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); - else - DBG("DSI PLL lock success"); - - return locked ? 0 : -EINVAL; -} - -static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - - DBG("id=%d", pll_28nm->id); - pll_write(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_GLB_CFG, 0x00); -} - -static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; - void __iomem *base = pll_28nm->mmio; - - cached_state->postdiv3 = - pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG); - cached_state->postdiv1 = - pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG); - cached_state->byte_mux = pll_read(base + REG_DSI_28nm_PHY_PLL_VREG_CFG); - if (dsi_pll_28nm_clk_is_enabled(&pll->clk_hw)) - cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw); - else - cached_state->vco_rate = 0; -} - -static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; - void __iomem *base = pll_28nm->mmio; - int ret; - - ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw, - cached_state->vco_rate, 0); - if (ret) { - DRM_DEV_ERROR(&pll_28nm->pdev->dev, - "restore vco rate failed. ret=%d\n", ret); - return ret; - } - - pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG, - cached_state->postdiv3); - pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG, - cached_state->postdiv1); - pll_write(base + REG_DSI_28nm_PHY_PLL_VREG_CFG, - cached_state->byte_mux); - - return 0; -} - -static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll, - struct clk **byte_clk_provider, - struct clk **pixel_clk_provider) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - - if (byte_clk_provider) - *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK]; - if (pixel_clk_provider) - *pixel_clk_provider = - pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK]; - - return 0; -} - -static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - int i; - - msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev, - pll_28nm->clks, pll_28nm->num_clks); - - for (i = 0; i < NUM_PROVIDED_CLKS; i++) - pll_28nm->provided_clks[i] = NULL; - - pll_28nm->num_clks = 0; - pll_28nm->clk_data.clks = NULL; - pll_28nm->clk_data.clk_num = 0; -} - -static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) -{ - char clk_name[32], parent1[32], parent2[32], vco_name[32]; - struct clk_init_data vco_init = { - .parent_names = (const char *[]){ "xo" }, - .num_parents = 1, - .name = vco_name, - .flags = CLK_IGNORE_UNUSED, - .ops = &clk_ops_dsi_pll_28nm_vco, - }; - struct device *dev = &pll_28nm->pdev->dev; - struct clk **clks = pll_28nm->clks; - struct clk **provided_clks = pll_28nm->provided_clks; - int num = 0; - int ret; - - DBG("%d", pll_28nm->id); - - snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id); - pll_28nm->base.clk_hw.init = &vco_init; - clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw); - - snprintf(clk_name, 32, "dsi%danalog_postdiv_clk", pll_28nm->id); - snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id); - clks[num++] = clk_register_divider(dev, clk_name, - parent1, CLK_SET_RATE_PARENT, - pll_28nm->mmio + - REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG, - 0, 4, 0, NULL); - - snprintf(clk_name, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id); - snprintf(parent1, 32, "dsi%danalog_postdiv_clk", pll_28nm->id); - clks[num++] = clk_register_fixed_factor(dev, clk_name, - parent1, CLK_SET_RATE_PARENT, - 1, 2); - - snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id); - snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id); - clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] = - clk_register_divider(dev, clk_name, - parent1, 0, pll_28nm->mmio + - REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG, - 0, 8, 0, NULL); - - snprintf(clk_name, 32, "dsi%dbyte_mux", pll_28nm->id); - snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id); - snprintf(parent2, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id); - clks[num++] = clk_register_mux(dev, clk_name, - ((const char *[]){ - parent1, parent2 - }), 2, CLK_SET_RATE_PARENT, pll_28nm->mmio + - REG_DSI_28nm_PHY_PLL_VREG_CFG, 1, 1, 0, NULL); - - snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id); - snprintf(parent1, 32, "dsi%dbyte_mux", pll_28nm->id); - clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] = - clk_register_fixed_factor(dev, clk_name, - parent1, CLK_SET_RATE_PARENT, 1, 4); - - pll_28nm->num_clks = num; - - pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS; - pll_28nm->clk_data.clks = provided_clks; - - ret = of_clk_add_provider(dev->of_node, - of_clk_src_onecell_get, &pll_28nm->clk_data); - if (ret) { - DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret); - return ret; - } - - return 0; -} - -struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev, - enum msm_dsi_phy_type type, int id) -{ - struct dsi_pll_28nm *pll_28nm; - struct msm_dsi_pll *pll; - int ret; - - if (!pdev) - return ERR_PTR(-ENODEV); - - pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL); - if (!pll_28nm) - return ERR_PTR(-ENOMEM); - - pll_28nm->pdev = pdev; - pll_28nm->id = id; - - pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); - if (IS_ERR_OR_NULL(pll_28nm->mmio)) { - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__); - return ERR_PTR(-ENOMEM); - } - - pll = &pll_28nm->base; - pll->min_rate = VCO_MIN_RATE; - pll->max_rate = VCO_MAX_RATE; - pll->get_provider = dsi_pll_28nm_get_provider; - pll->destroy = dsi_pll_28nm_destroy; - pll->disable_seq = dsi_pll_28nm_disable_seq; - pll->save_state = dsi_pll_28nm_save_state; - pll->restore_state = dsi_pll_28nm_restore_state; - - if (type == MSM_DSI_PHY_28NM_HPM) { - pll_28nm->vco_delay = 1; - - pll->en_seq_cnt = 3; - pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_hpm; - pll->enable_seqs[1] = dsi_pll_28nm_enable_seq_hpm; - pll->enable_seqs[2] = dsi_pll_28nm_enable_seq_hpm; - } else if (type == MSM_DSI_PHY_28NM_LP) { - pll_28nm->vco_delay = 1000; - - pll->en_seq_cnt = 1; - pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_lp; - } else { - DRM_DEV_ERROR(&pdev->dev, "phy type (%d) is not 28nm\n", type); - return ERR_PTR(-EINVAL); - } - - ret = pll_28nm_register(pll_28nm); - if (ret) { - DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); - return ERR_PTR(ret); - } - - return pll; -} - diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c deleted file mode 100644 index a6e7a2525fe0..000000000000 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c +++ /dev/null @@ -1,526 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. - */ - -#include - -#include "dsi_pll.h" -#include "dsi.xml.h" - -/* - * DSI PLL 28nm (8960/A family) - clock diagram (eg: DSI1): - * - * - * +------+ - * dsi1vco_clk ----o-----| DIV1 |---dsi1pllbit (not exposed as clock) - * F * byte_clk | +------+ - * | bit clock divider (F / 8) - * | - * | +------+ - * o-----| DIV2 |---dsi0pllbyte---o---> To byte RCG - * | +------+ | (sets parent rate) - * | byte clock divider (F) | - * | | - * | o---> To esc RCG - * | (doesn't set parent rate) - * | - * | +------+ - * o-----| DIV3 |----dsi0pll------o---> To dsi RCG - * +------+ | (sets parent rate) - * dsi clock divider (F * magic) | - * | - * o---> To pixel rcg - * (doesn't set parent rate) - */ - -#define POLL_MAX_READS 8000 -#define POLL_TIMEOUT_US 1 - -#define NUM_PROVIDED_CLKS 2 - -#define VCO_REF_CLK_RATE 27000000 -#define VCO_MIN_RATE 600000000 -#define VCO_MAX_RATE 1200000000 - -#define DSI_BYTE_PLL_CLK 0 -#define DSI_PIXEL_PLL_CLK 1 - -#define VCO_PREF_DIV_RATIO 27 - -struct pll_28nm_cached_state { - unsigned long vco_rate; - u8 postdiv3; - u8 postdiv2; - u8 postdiv1; -}; - -struct clk_bytediv { - struct clk_hw hw; - void __iomem *reg; -}; - -struct dsi_pll_28nm { - struct msm_dsi_pll base; - - int id; - struct platform_device *pdev; - void __iomem *mmio; - - /* custom byte clock divider */ - struct clk_bytediv *bytediv; - - /* private clocks: */ - struct clk *clks[NUM_DSI_CLOCKS_MAX]; - u32 num_clks; - - /* clock-provider: */ - struct clk *provided_clks[NUM_PROVIDED_CLKS]; - struct clk_onecell_data clk_data; - - struct pll_28nm_cached_state cached_state; -}; - -#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base) - -static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm, - int nb_tries, int timeout_us) -{ - bool pll_locked = false; - u32 val; - - while (nb_tries--) { - val = pll_read(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_RDY); - pll_locked = !!(val & DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY); - - if (pll_locked) - break; - - udelay(timeout_us); - } - DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); - - return pll_locked; -} - -/* - * Clock Callbacks - */ -static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - void __iomem *base = pll_28nm->mmio; - u32 val, temp, fb_divider; - - DBG("rate=%lu, parent's=%lu", rate, parent_rate); - - temp = rate / 10; - val = VCO_REF_CLK_RATE / 10; - fb_divider = (temp * VCO_PREF_DIV_RATIO) / val; - fb_divider = fb_divider / 2 - 1; - pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1, - fb_divider & 0xff); - - val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2); - - val |= (fb_divider >> 8) & 0x07; - - pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2, - val); - - val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3); - - val |= (VCO_PREF_DIV_RATIO - 1) & 0x3f; - - pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3, - val); - - pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_6, - 0xf); - - val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); - val |= 0x7 << 4; - pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, - val); - - return 0; -} - -static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - - return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS, - POLL_TIMEOUT_US); -} - -static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - void __iomem *base = pll_28nm->mmio; - unsigned long vco_rate; - u32 status, fb_divider, temp, ref_divider; - - VERB("parent_rate=%lu", parent_rate); - - status = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0); - - if (status & DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE) { - fb_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1); - fb_divider &= 0xff; - temp = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2) & 0x07; - fb_divider = (temp << 8) | fb_divider; - fb_divider += 1; - - ref_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3); - ref_divider &= 0x3f; - ref_divider += 1; - - /* multiply by 2 */ - vco_rate = (parent_rate / ref_divider) * fb_divider * 2; - } else { - vco_rate = 0; - } - - DBG("returning vco rate = %lu", vco_rate); - - return vco_rate; -} - -static const struct clk_ops clk_ops_dsi_pll_28nm_vco = { - .round_rate = msm_dsi_pll_helper_clk_round_rate, - .set_rate = dsi_pll_28nm_clk_set_rate, - .recalc_rate = dsi_pll_28nm_clk_recalc_rate, - .prepare = msm_dsi_pll_helper_clk_prepare, - .unprepare = msm_dsi_pll_helper_clk_unprepare, - .is_enabled = dsi_pll_28nm_clk_is_enabled, -}; - -/* - * Custom byte clock divier clk_ops - * - * This clock is the entry point to configuring the PLL. The user (dsi host) - * will set this clock's rate to the desired byte clock rate. The VCO lock - * frequency is a multiple of the byte clock rate. The multiplication factor - * (shown as F in the diagram above) is a function of the byte clock rate. - * - * This custom divider clock ensures that its parent (VCO) is set to the - * desired rate, and that the byte clock postdivider (POSTDIV2) is configured - * accordingly - */ -#define to_clk_bytediv(_hw) container_of(_hw, struct clk_bytediv, hw) - -static unsigned long clk_bytediv_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_bytediv *bytediv = to_clk_bytediv(hw); - unsigned int div; - - div = pll_read(bytediv->reg) & 0xff; - - return parent_rate / (div + 1); -} - -/* find multiplication factor(wrt byte clock) at which the VCO should be set */ -static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate) -{ - unsigned long bit_mhz; - - /* convert to bit clock in Mhz */ - bit_mhz = (byte_clk_rate * 8) / 1000000; - - if (bit_mhz < 125) - return 64; - else if (bit_mhz < 250) - return 32; - else if (bit_mhz < 600) - return 16; - else - return 8; -} - -static long clk_bytediv_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - unsigned long best_parent; - unsigned int factor; - - factor = get_vco_mul_factor(rate); - - best_parent = rate * factor; - *prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent); - - return *prate / factor; -} - -static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_bytediv *bytediv = to_clk_bytediv(hw); - u32 val; - unsigned int factor; - - factor = get_vco_mul_factor(rate); - - val = pll_read(bytediv->reg); - val |= (factor - 1) & 0xff; - pll_write(bytediv->reg, val); - - return 0; -} - -/* Our special byte clock divider ops */ -static const struct clk_ops clk_bytediv_ops = { - .round_rate = clk_bytediv_round_rate, - .set_rate = clk_bytediv_set_rate, - .recalc_rate = clk_bytediv_recalc_rate, -}; - -/* - * PLL Callbacks - */ -static int dsi_pll_28nm_enable_seq(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - struct device *dev = &pll_28nm->pdev->dev; - void __iomem *base = pll_28nm->mmio; - bool locked; - unsigned int bit_div, byte_div; - int max_reads = 1000, timeout_us = 100; - u32 val; - - DBG("id=%d", pll_28nm->id); - - /* - * before enabling the PLL, configure the bit clock divider since we - * don't expose it as a clock to the outside world - * 1: read back the byte clock divider that should already be set - * 2: divide by 8 to get bit clock divider - * 3: write it to POSTDIV1 - */ - val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9); - byte_div = val + 1; - bit_div = byte_div / 8; - - val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); - val &= ~0xf; - val |= (bit_div - 1); - pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val); - - /* enable the PLL */ - pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, - DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE); - - locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us); - - if (unlikely(!locked)) - DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); - else - DBG("DSI PLL lock success"); - - return locked ? 0 : -EINVAL; -} - -static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - - DBG("id=%d", pll_28nm->id); - pll_write(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00); -} - -static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; - void __iomem *base = pll_28nm->mmio; - - cached_state->postdiv3 = - pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10); - cached_state->postdiv2 = - pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9); - cached_state->postdiv1 = - pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); - - cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw); -} - -static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; - void __iomem *base = pll_28nm->mmio; - int ret; - - ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw, - cached_state->vco_rate, 0); - if (ret) { - DRM_DEV_ERROR(&pll_28nm->pdev->dev, - "restore vco rate failed. ret=%d\n", ret); - return ret; - } - - pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10, - cached_state->postdiv3); - pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9, - cached_state->postdiv2); - pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, - cached_state->postdiv1); - - return 0; -} - -static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll, - struct clk **byte_clk_provider, - struct clk **pixel_clk_provider) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - - if (byte_clk_provider) - *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK]; - if (pixel_clk_provider) - *pixel_clk_provider = - pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK]; - - return 0; -} - -static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll) -{ - struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); - - msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev, - pll_28nm->clks, pll_28nm->num_clks); -} - -static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) -{ - char *clk_name, *parent_name, *vco_name; - struct clk_init_data vco_init = { - .parent_names = (const char *[]){ "pxo" }, - .num_parents = 1, - .flags = CLK_IGNORE_UNUSED, - .ops = &clk_ops_dsi_pll_28nm_vco, - }; - struct device *dev = &pll_28nm->pdev->dev; - struct clk **clks = pll_28nm->clks; - struct clk **provided_clks = pll_28nm->provided_clks; - struct clk_bytediv *bytediv; - struct clk_init_data bytediv_init = { }; - int ret, num = 0; - - DBG("%d", pll_28nm->id); - - bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL); - if (!bytediv) - return -ENOMEM; - - vco_name = devm_kzalloc(dev, 32, GFP_KERNEL); - if (!vco_name) - return -ENOMEM; - - parent_name = devm_kzalloc(dev, 32, GFP_KERNEL); - if (!parent_name) - return -ENOMEM; - - clk_name = devm_kzalloc(dev, 32, GFP_KERNEL); - if (!clk_name) - return -ENOMEM; - - pll_28nm->bytediv = bytediv; - - snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id); - vco_init.name = vco_name; - - pll_28nm->base.clk_hw.init = &vco_init; - - clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw); - - /* prepare and register bytediv */ - bytediv->hw.init = &bytediv_init; - bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9; - - snprintf(parent_name, 32, "dsi%dvco_clk", pll_28nm->id); - snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id); - - bytediv_init.name = clk_name; - bytediv_init.ops = &clk_bytediv_ops; - bytediv_init.flags = CLK_SET_RATE_PARENT; - bytediv_init.parent_names = (const char * const *) &parent_name; - bytediv_init.num_parents = 1; - - /* DIV2 */ - clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] = - clk_register(dev, &bytediv->hw); - - snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id); - /* DIV3 */ - clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] = - clk_register_divider(dev, clk_name, - parent_name, 0, pll_28nm->mmio + - REG_DSI_28nm_8960_PHY_PLL_CTRL_10, - 0, 8, 0, NULL); - - pll_28nm->num_clks = num; - - pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS; - pll_28nm->clk_data.clks = provided_clks; - - ret = of_clk_add_provider(dev->of_node, - of_clk_src_onecell_get, &pll_28nm->clk_data); - if (ret) { - DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret); - return ret; - } - - return 0; -} - -struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev, - int id) -{ - struct dsi_pll_28nm *pll_28nm; - struct msm_dsi_pll *pll; - int ret; - - if (!pdev) - return ERR_PTR(-ENODEV); - - pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL); - if (!pll_28nm) - return ERR_PTR(-ENOMEM); - - pll_28nm->pdev = pdev; - pll_28nm->id = id + 1; - - pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); - if (IS_ERR_OR_NULL(pll_28nm->mmio)) { - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__); - return ERR_PTR(-ENOMEM); - } - - pll = &pll_28nm->base; - pll->min_rate = VCO_MIN_RATE; - pll->max_rate = VCO_MAX_RATE; - pll->get_provider = dsi_pll_28nm_get_provider; - pll->destroy = dsi_pll_28nm_destroy; - pll->disable_seq = dsi_pll_28nm_disable_seq; - pll->save_state = dsi_pll_28nm_save_state; - pll->restore_state = dsi_pll_28nm_restore_state; - - pll->en_seq_cnt = 1; - pll->enable_seqs[0] = dsi_pll_28nm_enable_seq; - - ret = pll_28nm_register(pll_28nm); - if (ret) { - DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); - return ERR_PTR(ret); - } - - return pll; -} diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c deleted file mode 100644 index e29b3bfd63d1..000000000000 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c +++ /dev/null @@ -1,913 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0 - * Copyright (c) 2018, The Linux Foundation - */ - -#include -#include -#include - -#include "dsi_pll.h" -#include "dsi.xml.h" - -/* - * DSI PLL 7nm - clock diagram (eg: DSI0): TODO: updated CPHY diagram - * - * dsi0_pll_out_div_clk dsi0_pll_bit_clk - * | | - * | | - * +---------+ | +----------+ | +----+ - * dsi0vco_clk ---| out_div |--o--| divl_3_0 |--o--| /8 |-- dsi0_phy_pll_out_byteclk - * +---------+ | +----------+ | +----+ - * | | - * | | dsi0_pll_by_2_bit_clk - * | | | - * | | +----+ | |\ dsi0_pclk_mux - * | |--| /2 |--o--| \ | - * | | +----+ | \ | +---------+ - * | --------------| |--o--| div_7_4 |-- dsi0_phy_pll_out_dsiclk - * |------------------------------| / +---------+ - * | +-----+ | / - * -----------| /4? |--o----------|/ - * +-----+ | | - * | |dsiclk_sel - * | - * dsi0_pll_post_out_div_clk - */ - -#define DSI_BYTE_PLL_CLK 0 -#define DSI_PIXEL_PLL_CLK 1 -#define NUM_PROVIDED_CLKS 2 - -#define VCO_REF_CLK_RATE 19200000 - -struct dsi_pll_regs { - u32 pll_prop_gain_rate; - u32 pll_lockdet_rate; - u32 decimal_div_start; - u32 frac_div_start_low; - u32 frac_div_start_mid; - u32 frac_div_start_high; - u32 pll_clock_inverters; - u32 ssc_stepsize_low; - u32 ssc_stepsize_high; - u32 ssc_div_per_low; - u32 ssc_div_per_high; - u32 ssc_adjper_low; - u32 ssc_adjper_high; - u32 ssc_control; -}; - -struct dsi_pll_config { - u32 ref_freq; - bool div_override; - u32 output_div; - bool ignore_frac; - bool disable_prescaler; - bool enable_ssc; - bool ssc_center; - u32 dec_bits; - u32 frac_bits; - u32 lock_timer; - u32 ssc_freq; - u32 ssc_offset; - u32 ssc_adj_per; - u32 thresh_cycles; - u32 refclk_cycles; -}; - -struct pll_7nm_cached_state { - unsigned long vco_rate; - u8 bit_clk_div; - u8 pix_clk_div; - u8 pll_out_div; - u8 pll_mux; -}; - -struct dsi_pll_7nm { - struct msm_dsi_pll base; - - int id; - struct platform_device *pdev; - - void __iomem *phy_cmn_mmio; - void __iomem *mmio; - - u64 vco_ref_clk_rate; - u64 vco_current_rate; - - /* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */ - spinlock_t postdiv_lock; - - int vco_delay; - struct dsi_pll_config pll_configuration; - struct dsi_pll_regs reg_setup; - - /* private clocks: */ - struct clk_hw *out_div_clk_hw; - struct clk_hw *bit_clk_hw; - struct clk_hw *byte_clk_hw; - struct clk_hw *by_2_bit_clk_hw; - struct clk_hw *post_out_div_clk_hw; - struct clk_hw *pclk_mux_hw; - struct clk_hw *out_dsiclk_hw; - - /* clock-provider: */ - struct clk_hw_onecell_data *hw_data; - - struct pll_7nm_cached_state cached_state; - - enum msm_dsi_phy_usecase uc; - struct dsi_pll_7nm *slave; -}; - -#define to_pll_7nm(x) container_of(x, struct dsi_pll_7nm, base) - -/* - * Global list of private DSI PLL struct pointers. We need this for Dual DSI - * mode, where the master PLL's clk_ops needs access the slave's private data - */ -static struct dsi_pll_7nm *pll_7nm_list[DSI_MAX]; - -static void dsi_pll_setup_config(struct dsi_pll_7nm *pll) -{ - struct dsi_pll_config *config = &pll->pll_configuration; - - config->ref_freq = pll->vco_ref_clk_rate; - config->output_div = 1; - config->dec_bits = 8; - config->frac_bits = 18; - config->lock_timer = 64; - config->ssc_freq = 31500; - config->ssc_offset = 4800; - config->ssc_adj_per = 2; - config->thresh_cycles = 32; - config->refclk_cycles = 256; - - config->div_override = false; - config->ignore_frac = false; - config->disable_prescaler = false; - - /* TODO: ssc enable */ - config->enable_ssc = false; - config->ssc_center = 0; -} - -static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll) -{ - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; - u64 fref = pll->vco_ref_clk_rate; - u64 pll_freq; - u64 divider; - u64 dec, dec_multiple; - u32 frac; - u64 multiplier; - - pll_freq = pll->vco_current_rate; - - if (config->disable_prescaler) - divider = fref; - else - divider = fref * 2; - - multiplier = 1 << config->frac_bits; - dec_multiple = div_u64(pll_freq * multiplier, divider); - div_u64_rem(dec_multiple, multiplier, &frac); - - dec = div_u64(dec_multiple, multiplier); - - if (pll->base.type != MSM_DSI_PHY_7NM_V4_1) - regs->pll_clock_inverters = 0x28; - else if (pll_freq <= 1000000000ULL) - regs->pll_clock_inverters = 0xa0; - else if (pll_freq <= 2500000000ULL) - regs->pll_clock_inverters = 0x20; - else if (pll_freq <= 3020000000ULL) - regs->pll_clock_inverters = 0x00; - else - regs->pll_clock_inverters = 0x40; - - regs->pll_lockdet_rate = config->lock_timer; - regs->decimal_div_start = dec; - regs->frac_div_start_low = (frac & 0xff); - regs->frac_div_start_mid = (frac & 0xff00) >> 8; - regs->frac_div_start_high = (frac & 0x30000) >> 16; -} - -#define SSC_CENTER BIT(0) -#define SSC_EN BIT(1) - -static void dsi_pll_calc_ssc(struct dsi_pll_7nm *pll) -{ - struct dsi_pll_config *config = &pll->pll_configuration; - struct dsi_pll_regs *regs = &pll->reg_setup; - u32 ssc_per; - u32 ssc_mod; - u64 ssc_step_size; - u64 frac; - - if (!config->enable_ssc) { - DBG("SSC not enabled\n"); - return; - } - - ssc_per = DIV_ROUND_CLOSEST(config->ref_freq, config->ssc_freq) / 2 - 1; - ssc_mod = (ssc_per + 1) % (config->ssc_adj_per + 1); - ssc_per -= ssc_mod; - - frac = regs->frac_div_start_low | - (regs->frac_div_start_mid << 8) | - (regs->frac_div_start_high << 16); - ssc_step_size = regs->decimal_div_start; - ssc_step_size *= (1 << config->frac_bits); - ssc_step_size += frac; - ssc_step_size *= config->ssc_offset; - ssc_step_size *= (config->ssc_adj_per + 1); - ssc_step_size = div_u64(ssc_step_size, (ssc_per + 1)); - ssc_step_size = DIV_ROUND_CLOSEST_ULL(ssc_step_size, 1000000); - - regs->ssc_div_per_low = ssc_per & 0xFF; - regs->ssc_div_per_high = (ssc_per & 0xFF00) >> 8; - regs->ssc_stepsize_low = (u32)(ssc_step_size & 0xFF); - regs->ssc_stepsize_high = (u32)((ssc_step_size & 0xFF00) >> 8); - regs->ssc_adjper_low = config->ssc_adj_per & 0xFF; - regs->ssc_adjper_high = (config->ssc_adj_per & 0xFF00) >> 8; - - regs->ssc_control = config->ssc_center ? SSC_CENTER : 0; - - pr_debug("SCC: Dec:%d, frac:%llu, frac_bits:%d\n", - regs->decimal_div_start, frac, config->frac_bits); - pr_debug("SSC: div_per:0x%X, stepsize:0x%X, adjper:0x%X\n", - ssc_per, (u32)ssc_step_size, config->ssc_adj_per); -} - -static void dsi_pll_ssc_commit(struct dsi_pll_7nm *pll) -{ - void __iomem *base = pll->mmio; - struct dsi_pll_regs *regs = &pll->reg_setup; - - if (pll->pll_configuration.enable_ssc) { - pr_debug("SSC is enabled\n"); - - pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_LOW_1, - regs->ssc_stepsize_low); - pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_STEPSIZE_HIGH_1, - regs->ssc_stepsize_high); - pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_LOW_1, - regs->ssc_div_per_low); - pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_DIV_PER_HIGH_1, - regs->ssc_div_per_high); - pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_LOW_1, - regs->ssc_adjper_low); - pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_ADJPER_HIGH_1, - regs->ssc_adjper_high); - pll_write(base + REG_DSI_7nm_PHY_PLL_SSC_CONTROL, - SSC_EN | regs->ssc_control); - } -} - -static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll) -{ - void __iomem *base = pll->mmio; - u8 analog_controls_five_1 = 0x01, vco_config_1 = 0x00; - - if (pll->base.type == MSM_DSI_PHY_7NM_V4_1) { - if (pll->vco_current_rate >= 3100000000ULL) - analog_controls_five_1 = 0x03; - - if (pll->vco_current_rate < 1520000000ULL) - vco_config_1 = 0x08; - else if (pll->vco_current_rate < 2990000000ULL) - vco_config_1 = 0x01; - } - - pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1, - analog_controls_five_1); - pll_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1); - pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE, 0x01); - pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03); - pll_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00); - pll_write(base + REG_DSI_7nm_PHY_PLL_DSM_DIVIDER, 0x00); - pll_write(base + REG_DSI_7nm_PHY_PLL_FEEDBACK_DIVIDER, 0x4e); - pll_write(base + REG_DSI_7nm_PHY_PLL_CALIBRATION_SETTINGS, 0x40); - pll_write(base + REG_DSI_7nm_PHY_PLL_BAND_SEL_CAL_SETTINGS_THREE, 0xba); - pll_write(base + REG_DSI_7nm_PHY_PLL_FREQ_DETECT_SETTINGS_ONE, 0x0c); - pll_write(base + REG_DSI_7nm_PHY_PLL_OUTDIV, 0x00); - pll_write(base + REG_DSI_7nm_PHY_PLL_CORE_OVERRIDE, 0x00); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_DIGITAL_TIMERS_TWO, 0x08); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_PROP_GAIN_RATE_1, 0x0a); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_BAND_SEL_RATE_1, 0xc0); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0x84); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_INT_GAIN_IFILT_BAND_1, 0x82); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_FL_INT_GAIN_PFILT_BAND_1, 0x4c); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_OVERRIDE, 0x80); - pll_write(base + REG_DSI_7nm_PHY_PLL_PFILT, 0x29); - pll_write(base + REG_DSI_7nm_PHY_PLL_PFILT, 0x2f); - pll_write(base + REG_DSI_7nm_PHY_PLL_IFILT, 0x2a); - pll_write(base + REG_DSI_7nm_PHY_PLL_IFILT, - pll->base.type == MSM_DSI_PHY_7NM_V4_1 ? 0x3f : 0x22); - - if (pll->base.type == MSM_DSI_PHY_7NM_V4_1) { - pll_write(base + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22); - if (pll->slave) - pll_write(pll->slave->mmio + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22); - } -} - -static void dsi_pll_commit(struct dsi_pll_7nm *pll) -{ - void __iomem *base = pll->mmio; - struct dsi_pll_regs *reg = &pll->reg_setup; - - pll_write(base + REG_DSI_7nm_PHY_PLL_CORE_INPUT_OVERRIDE, 0x12); - pll_write(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1, reg->decimal_div_start); - pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low); - pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid); - pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, reg->pll_lockdet_rate); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); - pll_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */ - pll_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters); -} - -static int dsi_pll_7nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); - - DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_7nm->id, rate, - parent_rate); - - pll_7nm->vco_current_rate = rate; - pll_7nm->vco_ref_clk_rate = VCO_REF_CLK_RATE; - - dsi_pll_setup_config(pll_7nm); - - dsi_pll_calc_dec_frac(pll_7nm); - - dsi_pll_calc_ssc(pll_7nm); - - dsi_pll_commit(pll_7nm); - - dsi_pll_config_hzindep_reg(pll_7nm); - - dsi_pll_ssc_commit(pll_7nm); - - /* flush, ensure all register writes are done*/ - wmb(); - - return 0; -} - -static int dsi_pll_7nm_lock_status(struct dsi_pll_7nm *pll) -{ - int rc; - u32 status = 0; - u32 const delay_us = 100; - u32 const timeout_us = 5000; - - rc = readl_poll_timeout_atomic(pll->mmio + - REG_DSI_7nm_PHY_PLL_COMMON_STATUS_ONE, - status, - ((status & BIT(0)) > 0), - delay_us, - timeout_us); - if (rc) - pr_err("DSI PLL(%d) lock failed, status=0x%08x\n", - pll->id, status); - - return rc; -} - -static void dsi_pll_disable_pll_bias(struct dsi_pll_7nm *pll) -{ - u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0); - - pll_write(pll->mmio + REG_DSI_7nm_PHY_PLL_SYSTEM_MUXES, 0); - pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0, data & ~BIT(5)); - ndelay(250); -} - -static void dsi_pll_enable_pll_bias(struct dsi_pll_7nm *pll) -{ - u32 data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0); - - pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_0, data | BIT(5)); - pll_write(pll->mmio + REG_DSI_7nm_PHY_PLL_SYSTEM_MUXES, 0xc0); - ndelay(250); -} - -static void dsi_pll_disable_global_clk(struct dsi_pll_7nm *pll) -{ - u32 data; - - data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1); - pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1, data & ~BIT(5)); -} - -static void dsi_pll_enable_global_clk(struct dsi_pll_7nm *pll) -{ - u32 data; - - pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CTRL_3, 0x04); - - data = pll_read(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1); - pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_CLK_CFG1, - data | BIT(5) | BIT(4)); -} - -static void dsi_pll_phy_dig_reset(struct dsi_pll_7nm *pll) -{ - /* - * Reset the PHY digital domain. This would be needed when - * coming out of a CX or analog rail power collapse while - * ensuring that the pads maintain LP00 or LP11 state - */ - pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE4, BIT(0)); - wmb(); /* Ensure that the reset is deasserted */ - pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE4, 0x0); - wmb(); /* Ensure that the reset is deasserted */ -} - -static int dsi_pll_7nm_vco_prepare(struct clk_hw *hw) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); - int rc; - - dsi_pll_enable_pll_bias(pll_7nm); - if (pll_7nm->slave) - dsi_pll_enable_pll_bias(pll_7nm->slave); - - /* Start PLL */ - pll_write(pll_7nm->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_PLL_CNTRL, 0x01); - - /* - * ensure all PLL configurations are written prior to checking - * for PLL lock. - */ - wmb(); - - /* Check for PLL lock */ - rc = dsi_pll_7nm_lock_status(pll_7nm); - if (rc) { - pr_err("PLL(%d) lock failed\n", pll_7nm->id); - goto error; - } - - pll->pll_on = true; - - /* - * assert power on reset for PHY digital in case the PLL is - * enabled after CX of analog domain power collapse. This needs - * to be done before enabling the global clk. - */ - dsi_pll_phy_dig_reset(pll_7nm); - if (pll_7nm->slave) - dsi_pll_phy_dig_reset(pll_7nm->slave); - - dsi_pll_enable_global_clk(pll_7nm); - if (pll_7nm->slave) - dsi_pll_enable_global_clk(pll_7nm->slave); - -error: - return rc; -} - -static void dsi_pll_disable_sub(struct dsi_pll_7nm *pll) -{ - pll_write(pll->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_RBUF_CTRL, 0); - dsi_pll_disable_pll_bias(pll); -} - -static void dsi_pll_7nm_vco_unprepare(struct clk_hw *hw) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); - - /* - * To avoid any stray glitches while abruptly powering down the PLL - * make sure to gate the clock using the clock enable bit before - * powering down the PLL - */ - dsi_pll_disable_global_clk(pll_7nm); - pll_write(pll_7nm->phy_cmn_mmio + REG_DSI_7nm_PHY_CMN_PLL_CNTRL, 0); - dsi_pll_disable_sub(pll_7nm); - if (pll_7nm->slave) { - dsi_pll_disable_global_clk(pll_7nm->slave); - dsi_pll_disable_sub(pll_7nm->slave); - } - /* flush, ensure all register writes are done */ - wmb(); - pll->pll_on = false; -} - -static unsigned long dsi_pll_7nm_vco_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct msm_dsi_pll *pll = hw_clk_to_pll(hw); - struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); - struct dsi_pll_config *config = &pll_7nm->pll_configuration; - void __iomem *base = pll_7nm->mmio; - u64 ref_clk = pll_7nm->vco_ref_clk_rate; - u64 vco_rate = 0x0; - u64 multiplier; - u32 frac; - u32 dec; - u64 pll_freq, tmp64; - - dec = pll_read(base + REG_DSI_7nm_PHY_PLL_DECIMAL_DIV_START_1); - dec &= 0xff; - - frac = pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1); - frac |= ((pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1) & - 0xff) << 8); - frac |= ((pll_read(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1) & - 0x3) << 16); - - /* - * TODO: - * 1. Assumes prescaler is disabled - */ - multiplier = 1 << config->frac_bits; - pll_freq = dec * (ref_clk * 2); - tmp64 = (ref_clk * 2 * frac); - pll_freq += div_u64(tmp64, multiplier); - - vco_rate = pll_freq; - - DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x", - pll_7nm->id, (unsigned long)vco_rate, dec, frac); - - return (unsigned long)vco_rate; -} - -static const struct clk_ops clk_ops_dsi_pll_7nm_vco = { - .round_rate = msm_dsi_pll_helper_clk_round_rate, - .set_rate = dsi_pll_7nm_vco_set_rate, - .recalc_rate = dsi_pll_7nm_vco_recalc_rate, - .prepare = dsi_pll_7nm_vco_prepare, - .unprepare = dsi_pll_7nm_vco_unprepare, -}; - -/* - * PLL Callbacks - */ - -static void dsi_pll_7nm_save_state(struct msm_dsi_pll *pll) -{ - struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); - struct pll_7nm_cached_state *cached = &pll_7nm->cached_state; - void __iomem *phy_base = pll_7nm->phy_cmn_mmio; - u32 cmn_clk_cfg0, cmn_clk_cfg1; - - cached->pll_out_div = pll_read(pll_7nm->mmio + - REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE); - cached->pll_out_div &= 0x3; - - cmn_clk_cfg0 = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0); - cached->bit_clk_div = cmn_clk_cfg0 & 0xf; - cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4; - - cmn_clk_cfg1 = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1); - cached->pll_mux = cmn_clk_cfg1 & 0x3; - - DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x", - pll_7nm->id, cached->pll_out_div, cached->bit_clk_div, - cached->pix_clk_div, cached->pll_mux); -} - -static int dsi_pll_7nm_restore_state(struct msm_dsi_pll *pll) -{ - struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); - struct pll_7nm_cached_state *cached = &pll_7nm->cached_state; - void __iomem *phy_base = pll_7nm->phy_cmn_mmio; - u32 val; - int ret; - - val = pll_read(pll_7nm->mmio + REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE); - val &= ~0x3; - val |= cached->pll_out_div; - pll_write(pll_7nm->mmio + REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE, val); - - pll_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0, - cached->bit_clk_div | (cached->pix_clk_div << 4)); - - val = pll_read(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1); - val &= ~0x3; - val |= cached->pll_mux; - pll_write(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, val); - - ret = dsi_pll_7nm_vco_set_rate(&pll->clk_hw, pll_7nm->vco_current_rate, pll_7nm->vco_ref_clk_rate); - if (ret) { - DRM_DEV_ERROR(&pll_7nm->pdev->dev, - "restore vco rate failed. ret=%d\n", ret); - return ret; - } - - DBG("DSI PLL%d", pll_7nm->id); - - return 0; -} - -static int dsi_pll_7nm_set_usecase(struct msm_dsi_pll *pll, - enum msm_dsi_phy_usecase uc) -{ - struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); - void __iomem *base = pll_7nm->phy_cmn_mmio; - u32 data = 0x0; /* internal PLL */ - - DBG("DSI PLL%d", pll_7nm->id); - - switch (uc) { - case MSM_DSI_PHY_STANDALONE: - break; - case MSM_DSI_PHY_MASTER: - pll_7nm->slave = pll_7nm_list[(pll_7nm->id + 1) % DSI_MAX]; - break; - case MSM_DSI_PHY_SLAVE: - data = 0x1; /* external PLL */ - break; - default: - return -EINVAL; - } - - /* set PLL src */ - pll_write(base + REG_DSI_7nm_PHY_CMN_CLK_CFG1, (data << 2)); - - pll_7nm->uc = uc; - - return 0; -} - -static int dsi_pll_7nm_get_provider(struct msm_dsi_pll *pll, - struct clk **byte_clk_provider, - struct clk **pixel_clk_provider) -{ - struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); - struct clk_hw_onecell_data *hw_data = pll_7nm->hw_data; - - DBG("DSI PLL%d", pll_7nm->id); - - if (byte_clk_provider) - *byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk; - if (pixel_clk_provider) - *pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk; - - return 0; -} - -static void dsi_pll_7nm_destroy(struct msm_dsi_pll *pll) -{ - struct dsi_pll_7nm *pll_7nm = to_pll_7nm(pll); - struct device *dev = &pll_7nm->pdev->dev; - - DBG("DSI PLL%d", pll_7nm->id); - of_clk_del_provider(dev->of_node); - - clk_hw_unregister_divider(pll_7nm->out_dsiclk_hw); - clk_hw_unregister_mux(pll_7nm->pclk_mux_hw); - clk_hw_unregister_fixed_factor(pll_7nm->post_out_div_clk_hw); - clk_hw_unregister_fixed_factor(pll_7nm->by_2_bit_clk_hw); - clk_hw_unregister_fixed_factor(pll_7nm->byte_clk_hw); - clk_hw_unregister_divider(pll_7nm->bit_clk_hw); - clk_hw_unregister_divider(pll_7nm->out_div_clk_hw); - clk_hw_unregister(&pll_7nm->base.clk_hw); -} - -/* - * The post dividers and mux clocks are created using the standard divider and - * mux API. Unlike the 14nm PHY, the slave PLL doesn't need its dividers/mux - * state to follow the master PLL's divider/mux state. Therefore, we don't - * require special clock ops that also configure the slave PLL registers - */ -static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm) -{ - char clk_name[32], parent[32], vco_name[32]; - char parent2[32], parent3[32], parent4[32]; - struct clk_init_data vco_init = { - .parent_names = (const char *[]){ "bi_tcxo" }, - .num_parents = 1, - .name = vco_name, - .flags = CLK_IGNORE_UNUSED, - .ops = &clk_ops_dsi_pll_7nm_vco, - }; - struct device *dev = &pll_7nm->pdev->dev; - struct clk_hw_onecell_data *hw_data; - struct clk_hw *hw; - int ret; - - DBG("DSI%d", pll_7nm->id); - - hw_data = devm_kzalloc(dev, sizeof(*hw_data) + - NUM_PROVIDED_CLKS * sizeof(struct clk_hw *), - GFP_KERNEL); - if (!hw_data) - return -ENOMEM; - - snprintf(vco_name, 32, "dsi%dvco_clk", pll_7nm->id); - pll_7nm->base.clk_hw.init = &vco_init; - - ret = clk_hw_register(dev, &pll_7nm->base.clk_hw); - if (ret) - return ret; - - snprintf(clk_name, 32, "dsi%d_pll_out_div_clk", pll_7nm->id); - snprintf(parent, 32, "dsi%dvco_clk", pll_7nm->id); - - hw = clk_hw_register_divider(dev, clk_name, - parent, CLK_SET_RATE_PARENT, - pll_7nm->mmio + - REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE, - 0, 2, CLK_DIVIDER_POWER_OF_TWO, NULL); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_base_clk_hw; - } - - pll_7nm->out_div_clk_hw = hw; - - snprintf(clk_name, 32, "dsi%d_pll_bit_clk", pll_7nm->id); - snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_7nm->id); - - /* BIT CLK: DIV_CTRL_3_0 */ - hw = clk_hw_register_divider(dev, clk_name, parent, - CLK_SET_RATE_PARENT, - pll_7nm->phy_cmn_mmio + - REG_DSI_7nm_PHY_CMN_CLK_CFG0, - 0, 4, CLK_DIVIDER_ONE_BASED, - &pll_7nm->postdiv_lock); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_out_div_clk_hw; - } - - pll_7nm->bit_clk_hw = hw; - - snprintf(clk_name, 32, "dsi%d_phy_pll_out_byteclk", pll_7nm->id); - snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id); - - /* DSI Byte clock = VCO_CLK / OUT_DIV / BIT_DIV / 8 */ - hw = clk_hw_register_fixed_factor(dev, clk_name, parent, - CLK_SET_RATE_PARENT, 1, 8); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_bit_clk_hw; - } - - pll_7nm->byte_clk_hw = hw; - hw_data->hws[DSI_BYTE_PLL_CLK] = hw; - - snprintf(clk_name, 32, "dsi%d_pll_by_2_bit_clk", pll_7nm->id); - snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id); - - hw = clk_hw_register_fixed_factor(dev, clk_name, parent, - 0, 1, 2); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_byte_clk_hw; - } - - pll_7nm->by_2_bit_clk_hw = hw; - - snprintf(clk_name, 32, "dsi%d_pll_post_out_div_clk", pll_7nm->id); - snprintf(parent, 32, "dsi%d_pll_out_div_clk", pll_7nm->id); - - hw = clk_hw_register_fixed_factor(dev, clk_name, parent, - 0, 1, 4); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_by_2_bit_clk_hw; - } - - pll_7nm->post_out_div_clk_hw = hw; - - snprintf(clk_name, 32, "dsi%d_pclk_mux", pll_7nm->id); - snprintf(parent, 32, "dsi%d_pll_bit_clk", pll_7nm->id); - snprintf(parent2, 32, "dsi%d_pll_by_2_bit_clk", pll_7nm->id); - snprintf(parent3, 32, "dsi%d_pll_out_div_clk", pll_7nm->id); - snprintf(parent4, 32, "dsi%d_pll_post_out_div_clk", pll_7nm->id); - - hw = clk_hw_register_mux(dev, clk_name, - ((const char *[]){ - parent, parent2, parent3, parent4 - }), 4, 0, pll_7nm->phy_cmn_mmio + - REG_DSI_7nm_PHY_CMN_CLK_CFG1, - 0, 2, 0, NULL); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_post_out_div_clk_hw; - } - - pll_7nm->pclk_mux_hw = hw; - - snprintf(clk_name, 32, "dsi%d_phy_pll_out_dsiclk", pll_7nm->id); - snprintf(parent, 32, "dsi%d_pclk_mux", pll_7nm->id); - - /* PIX CLK DIV : DIV_CTRL_7_4*/ - hw = clk_hw_register_divider(dev, clk_name, parent, - 0, pll_7nm->phy_cmn_mmio + - REG_DSI_7nm_PHY_CMN_CLK_CFG0, - 4, 4, CLK_DIVIDER_ONE_BASED, - &pll_7nm->postdiv_lock); - if (IS_ERR(hw)) { - ret = PTR_ERR(hw); - goto err_pclk_mux_hw; - } - - pll_7nm->out_dsiclk_hw = hw; - hw_data->hws[DSI_PIXEL_PLL_CLK] = hw; - - hw_data->num = NUM_PROVIDED_CLKS; - pll_7nm->hw_data = hw_data; - - ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, - pll_7nm->hw_data); - if (ret) { - DRM_DEV_ERROR(dev, "failed to register clk provider: %d\n", ret); - goto err_dsiclk_hw; - } - - return 0; - -err_dsiclk_hw: - clk_hw_unregister_divider(pll_7nm->out_dsiclk_hw); -err_pclk_mux_hw: - clk_hw_unregister_mux(pll_7nm->pclk_mux_hw); -err_post_out_div_clk_hw: - clk_hw_unregister_fixed_factor(pll_7nm->post_out_div_clk_hw); -err_by_2_bit_clk_hw: - clk_hw_unregister_fixed_factor(pll_7nm->by_2_bit_clk_hw); -err_byte_clk_hw: - clk_hw_unregister_fixed_factor(pll_7nm->byte_clk_hw); -err_bit_clk_hw: - clk_hw_unregister_divider(pll_7nm->bit_clk_hw); -err_out_div_clk_hw: - clk_hw_unregister_divider(pll_7nm->out_div_clk_hw); -err_base_clk_hw: - clk_hw_unregister(&pll_7nm->base.clk_hw); - - return ret; -} - -struct msm_dsi_pll *msm_dsi_pll_7nm_init(struct platform_device *pdev, - enum msm_dsi_phy_type type, int id) -{ - struct dsi_pll_7nm *pll_7nm; - struct msm_dsi_pll *pll; - int ret; - - pll_7nm = devm_kzalloc(&pdev->dev, sizeof(*pll_7nm), GFP_KERNEL); - if (!pll_7nm) - return ERR_PTR(-ENOMEM); - - DBG("DSI PLL%d", id); - - pll_7nm->pdev = pdev; - pll_7nm->id = id; - pll_7nm_list[id] = pll_7nm; - - pll_7nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY"); - if (IS_ERR_OR_NULL(pll_7nm->phy_cmn_mmio)) { - DRM_DEV_ERROR(&pdev->dev, "failed to map CMN PHY base\n"); - return ERR_PTR(-ENOMEM); - } - - pll_7nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); - if (IS_ERR_OR_NULL(pll_7nm->mmio)) { - DRM_DEV_ERROR(&pdev->dev, "failed to map PLL base\n"); - return ERR_PTR(-ENOMEM); - } - - spin_lock_init(&pll_7nm->postdiv_lock); - - pll = &pll_7nm->base; - pll->min_rate = 1000000000UL; - pll->max_rate = 3500000000UL; - if (type == MSM_DSI_PHY_7NM_V4_1) { - pll->min_rate = 600000000UL; - pll->max_rate = (unsigned long)5000000000ULL; - /* workaround for max rate overflowing on 32-bit builds: */ - pll->max_rate = max(pll->max_rate, 0xffffffffUL); - } - pll->get_provider = dsi_pll_7nm_get_provider; - pll->destroy = dsi_pll_7nm_destroy; - pll->save_state = dsi_pll_7nm_save_state; - pll->restore_state = dsi_pll_7nm_restore_state; - pll->set_usecase = dsi_pll_7nm_set_usecase; - - pll_7nm->vco_delay = 1; - - ret = pll_7nm_register(pll_7nm); - if (ret) { - DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret); - return ERR_PTR(ret); - } - - /* TODO: Remove this when we have proper display handover support */ - msm_dsi_pll_save_state(pll); - - return pll; -}