From patchwork Sun Aug 13 11:44:48 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Patchwork-Submitter: Linus Walleij <linus.walleij@linaro.org>
X-Patchwork-Id: 109952
Delivered-To: patch@linaro.org
Received: by 10.140.95.78 with SMTP id h72csp3125959qge;
 Sun, 13 Aug 2017 04:45:36 -0700 (PDT)
X-Received: by 10.84.212.144 with SMTP id e16mr24488252pli.115.1502624735921; 
 Sun, 13 Aug 2017 04:45:35 -0700 (PDT)
ARC-Seal: i=1; a=rsa-sha256; t=1502624735; cv=none;
 d=google.com; s=arc-20160816;
 b=jo7r0X4/begc0oQUeHc5rInFs4l9npTa0kYMftB1mN9FEaoDirQ/cJUoN8urPoCfE0
 IKsVEF6BMGZc3pdik5tmUggWnRuKRmauLBFq63RRFrjBDNNi1uK2jcBQvC+TPU5wyTXM
 3YLK3TtIv1bRVsW86qdphtfI2WwUygYvp5RmZs7lWRrY/uTp44MO8lVULjF+Oqot7K2+
 51m/B56knjwKXYm/MaocwArafOCBuV5LfN69DnGmsBGm/gzLrvbMY+9zj51jbpOKNPqq
 Vb4J5+nHPmVjW1YDus5ULCvu9MQR/Oz42c/JRlY6vtJXSSDS4dj4AiCXKJ2/ZpR9yWT/
 YZ6w==
ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com;
 s=arc-20160816; 
 h=sender:errors-to:content-transfer-encoding:mime-version
 :list-subscribe:list-help:list-post:list-archive:list-unsubscribe
 :list-id:precedence:references:in-reply-to:message-id:date:subject
 :to:from:dkim-signature:delivered-to:arc-authentication-results;
 bh=EtqC3T3lXl2TX6NPqwCDsN+ygHijxyJE0itYr0JGk/A=;
 b=A1y2aQegm8WJX5n7QjplC+TszgADvyL5rbPL8nCQIH8ot+/3edn4tOlQsdXxKu0MpK
 E7C+keB+BMcY07mM+9R0AMzGA8rY3sQ6IHDHwpbr3p1mqe49Km9LTiiQaAefSEmlvifG
 Q/HtOb0G95k65y32ItCbh5cWKMj7Ri9UTFjSU+WlTc62Ja4y/r0MkDwWuZkInOujVYfs
 Jst2YvzMadnqM8KbfLm7ixSZ+xjm2XaIAvwI3twfaKzS1toh4dYWf5SQuah/9TU23vxd
 ycr1b5WqiDMCO49rtsgLrfUthyUTFPVlUm6rMhiastA7PUOix29TXFEBdu9A6K1dgBH+
 74nQ==
ARC-Authentication-Results: i=1; mx.google.com;
 dkim=neutral (body hash did not verify) header.i=@linaro.org
 header.s=google header.b=RGKJUj6Q; 
 spf=pass (google.com: best guess record for domain of
 dri-devel-bounces@lists.freedesktop.org designates
 131.252.210.177 as permitted sender)
 smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org; 
 dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org
Return-Path: <dri-devel-bounces@lists.freedesktop.org>
Received: from gabe.freedesktop.org (gabe.freedesktop.org. [131.252.210.177])
 by mx.google.com with ESMTPS id
 e5si2894467pfg.282.2017.08.13.04.45.35
 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128);
 Sun, 13 Aug 2017 04:45:35 -0700 (PDT)
Received-SPF: pass (google.com: best guess record for domain of
 dri-devel-bounces@lists.freedesktop.org designates
 131.252.210.177 as permitted sender) client-ip=131.252.210.177; 
Authentication-Results: mx.google.com;
 dkim=neutral (body hash did not verify) header.i=@linaro.org
 header.s=google header.b=RGKJUj6Q; 
 spf=pass (google.com: best guess record for domain of
 dri-devel-bounces@lists.freedesktop.org designates
 131.252.210.177 as permitted sender)
 smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org; 
 dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org
Received: from gabe.freedesktop.org (localhost [127.0.0.1])
 by gabe.freedesktop.org (Postfix) with ESMTP id 08E876E05D;
 Sun, 13 Aug 2017 11:45:05 +0000 (UTC)
X-Original-To: dri-devel@lists.freedesktop.org
Delivered-To: dri-devel@lists.freedesktop.org
Received: from mail-lf0-x233.google.com (mail-lf0-x233.google.com
 [IPv6:2a00:1450:4010:c07::233])
 by gabe.freedesktop.org (Postfix) with ESMTPS id CBE436E05D
 for <dri-devel@lists.freedesktop.org>;
 Sun, 13 Aug 2017 11:45:03 +0000 (UTC)
Received: by mail-lf0-x233.google.com with SMTP id g25so30493718lfh.1
 for <dri-devel@lists.freedesktop.org>;
 Sun, 13 Aug 2017 04:45:03 -0700 (PDT)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; 
 h=from:to:cc:subject:date:message-id:in-reply-to:references;
 bh=Q37g9dD4BBPWSQTJMGvOK/rQ6bCQtQAIGgKJh7+2tnU=;
 b=RGKJUj6Qof7asebcGQAZgvSUmylRoiolQS9sdkls6kiORw3JvFp5ZMRM0VOjEXvsOf
 B0aUSiCeLTBlQK3ZafZxweKncWMHeAyw+4exglzodcXJWHMbstfkR5B0R4QtFEmx6oeF
 xrqhOvAhwI2DRlg2Xar2xZRW/DlJ3OBX29yWc=
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
 d=1e100.net; s=20161025;
 h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to
 :references;
 bh=Q37g9dD4BBPWSQTJMGvOK/rQ6bCQtQAIGgKJh7+2tnU=;
 b=oZ+4yl2OPBdH2aLnswPpywIIiDNDOmLRTFMSS+BMkWYRAktQfCoQJ/jsrGjsT4sBm1
 4bCu76aTlDN4uRsukUrW9EYH5R9jHs5FvNmi+AOFlExobCGlHw3qKRHg7+O5C9f4KNsc
 LqlJO5HNnJOUFwcx1UUyInPU1TsRIcjtOVfowe9MLa39u3qHbxCAcwptW2wHl94kOdKO
 YbPr//AtFwbFHmiy4eR2PgyO/DGteg66N76RYBS1Ef51841SKmc6LBaB3xxQXBIqez3W
 h0BNwKZ0linQGNu5vGQFeKghBghj3NPWXibB3X+UgqxNXe5LSocJkXHvedfCyElJi6pi
 rSVw==
X-Gm-Message-State: AHYfb5g0gjYGir1MvVZQ3REi5Bc3eGXZUyEhV3ashbWhvhSNoVIwgl1N
 dO1TrKcBDroaH3sVNTPWcA==
X-Received: by 10.25.16.168 with SMTP id 40mr7486974lfq.147.1502624701752;
 Sun, 13 Aug 2017 04:45:01 -0700 (PDT)
Received: from fabina.bredbandsbolaget.se
 (c-277e71d5.014-348-6c756e10.cust.bredbandsbolaget.se.
 [213.113.126.39])
 by smtp.gmail.com with ESMTPSA id 1sm749759lju.63.2017.08.13.04.44.59
 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256);
 Sun, 13 Aug 2017 04:45:00 -0700 (PDT)
From: Linus Walleij <linus.walleij@linaro.org>
To: Thierry Reding <thierry.reding@gmail.com>, dri-devel@lists.freedesktop.org
Subject: [PATCH 3/3] drm/panel: Add Ilitek ILI9322 driver
Date: Sun, 13 Aug 2017 13:44:48 +0200
Message-Id: <20170813114448.20179-3-linus.walleij@linaro.org>
X-Mailer: git-send-email 2.13.4
In-Reply-To: <20170813114448.20179-1-linus.walleij@linaro.org>
References: <20170813114448.20179-1-linus.walleij@linaro.org>
X-BeenThere: dri-devel@lists.freedesktop.org
X-Mailman-Version: 2.1.18
Precedence: list
List-Id: Direct Rendering Infrastructure - Development
 <dri-devel.lists.freedesktop.org>
List-Unsubscribe: <https://lists.freedesktop.org/mailman/options/dri-devel>, 
 <mailto:dri-devel-request@lists.freedesktop.org?subject=unsubscribe>
List-Archive: <https://lists.freedesktop.org/archives/dri-devel>
List-Post: <mailto:dri-devel@lists.freedesktop.org>
List-Help: <mailto:dri-devel-request@lists.freedesktop.org?subject=help>
List-Subscribe: <https://lists.freedesktop.org/mailman/listinfo/dri-devel>, 
 <mailto:dri-devel-request@lists.freedesktop.org?subject=subscribe>
MIME-Version: 1.0
Errors-To: dri-devel-bounces@lists.freedesktop.org
Sender: "dri-devel" <dri-devel-bounces@lists.freedesktop.org>

This adds support for the Ilitek ILI9322 QVGA (320x240)
TFT panel driver.

This panel driver supports serial or parallel RGB or
YUV input and also ITU-T BT.656 input streams.

The controller is combined with a physical panel and
configured through the device tree.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpu/drm/panel/Kconfig                |   8 +
 drivers/gpu/drm/panel/Makefile               |   1 +
 drivers/gpu/drm/panel/panel-ilitek-ili9322.c | 936 +++++++++++++++++++++++++++
 3 files changed, 945 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9322.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index d84a031fae24..0159747c59fc 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -28,6 +28,14 @@ config DRM_PANEL_SIMPLE
 	  that it can be automatically turned off when the panel goes into a
 	  low power state.
 
+config DRM_PANEL_ILITEK_IL9322
+	tristate "Ilitek ILI9322 320x240 QVGA panels"
+	depends on OF && SPI
+	select REGMAP
+	help
+	  Say Y here if you want to enable support for Ilitek IL9322
+	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
+
 config DRM_PANEL_INNOLUX_P079ZCA
 	tristate "Innolux P079ZCA panel"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 9f6610d08b00..76f722aaa6ac 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
+obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
 obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
new file mode 100644
index 000000000000..7eed6814184e
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
@@ -0,0 +1,936 @@
+/*
+ * Ilitek ILI9322 TFT LCD drm_panel driver.
+ *
+ * This panel can be configured to support:
+ * - 8-bit serial RGB interface
+ * - 24-bit parallel RGB interface
+ * - 8-bit ITU-R BT.601 interface
+ * - 8-bit ITU-R BT.656 interface
+ * - Up to 320RGBx240 dots resolution TFT LCD displays
+ * - Scaling, brightness and contrast
+ *
+ * The scaling means that the display accepts a 640x480 or 720x480
+ * input and rescales it to fit to the 320x240 display. So what we
+ * present to the system is something else than what comes out on the
+ * actual display.
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Derived from drivers/drm/gpu/panel/panel-samsung-ld9040.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_panel.h>
+
+#include <linux/bitops.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <video/mipi_display.h>
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+#define ILI9322_CHIP_ID			0x00
+#define ILI9322_CHIP_ID_MAGIC		0x96
+
+/*
+ * Voltage on the communication interface, from 0.7 (0x00)
+ * to 1.32 (0x1f) times the VREG1OUT voltage in 2% increments.
+ * 1.00 (0x0f) is the default.
+ */
+#define ILI9322_VCOM_AMP		0x01
+
+/*
+ * High voltage on the communication signals, from 0.37 (0x00) to
+ * 1.0 (0x3f) times the VREGOUT1 voltage in 1% increments.
+ * 0.83 (0x2e) is the default.
+ */
+#define ILI9322_VCOM_HIGH		0x02
+
+/*
+ * VREG1 voltage regulator from 3.6V (0x00) to 6.0V (0x18) in 0.1V
+ * increments. 5.4V (0x12) is the default. This is the reference
+ * voltage for the VCOM levels and the greyscale level.
+ */
+#define ILI9322_VREG1_VOLTAGE		0x03
+
+/* Describes the incoming signal */
+#define ILI9322_ENTRY			0x06
+/* 0 = right-to-left, 1 = left-to-right (default), horizontal flip */
+#define ILI9322_ENTRY_HDIR		BIT(0)
+/* 0 = down-to-up, 1 = up-to-down (default), vertical flip  */
+#define ILI9322_ENTRY_VDIR		BIT(1)
+/* NTSC, PAL or autodetect */
+#define ILI9322_ENTRY_NTSC		(0 << 2)
+#define ILI9322_ENTRY_PAL		(1 << 2)
+#define ILI9322_ENTRY_AUTODETECT	(3 << 2)
+/* Input format */
+#define ILI9322_ENTRY_SERIAL_RGB_THROUGH (0 << 4)
+#define ILI9322_ENTRY_SERIAL_RGB_ALIGNED (1 << 4)
+#define ILI9322_ENTRY_SERIAL_RGB_DUMMY_320X240 (2 << 4)
+#define ILI9322_ENTRY_SERIAL_RGB_DUMMY_360X240 (3 << 4)
+#define ILI9322_ENTRY_DISABLE_1		(4 << 4)
+#define ILI9322_ENTRY_PARALLEL_RGB_THROUGH (5 << 4)
+#define ILI9322_ENTRY_PARALLEL_RGB_ALIGNED (6 << 4)
+#define ILI9322_ENTRY_YUV_640Y_320CBCR_25_54_MHZ (7 << 4)
+#define ILI9322_ENTRY_YUV_720Y_360CBCR_27_MHZ (8 << 4)
+#define ILI9322_ENTRY_DISABLE_2		(9 << 4)
+#define ILI9322_ENTRY_ITU_R_BT_656_720X360 (10 << 4)
+#define ILI9322_ENTRY_ITU_R_BT_656_640X320 (11 << 4)
+
+/* Power control */
+#define ILI9322_POW_CTRL		0x07
+#define ILI9322_POW_CTRL_STB		BIT(0) /* 0 = standby, 1 = normal */
+#define ILI9322_POW_CTRL_VGL		BIT(1) /* 0 = off, 1 = on  */
+#define ILI9322_POW_CTRL_VGH		BIT(2) /* 0 = off, 1 = on  */
+#define ILI9322_POW_CTRL_DDVDH		BIT(3) /* 0 = off, 1 = on  */
+#define ILI9322_POW_CTRL_VCOM		BIT(4) /* 0 = off, 1 = on  */
+#define ILI9322_POW_CTRL_VCL		BIT(5) /* 0 = off, 1 = on  */
+#define ILI9322_POW_CTRL_AUTO		BIT(6) /* 0 = interactive, 1 = auto */
+#define ILI9322_POW_CTRL_STANDBY	(ILI9322_POW_CTRL_VGL | \
+					 ILI9322_POW_CTRL_VGH | \
+					 ILI9322_POW_CTRL_DDVDH | \
+					 ILI9322_POW_CTRL_VCL | \
+					 ILI9322_POW_CTRL_AUTO | \
+					 BIT(7))
+#define ILI9322_POW_CTRL_DEFAULT	(ILI9322_POW_CTRL_STANDBY | \
+					 ILI9322_POW_CTRL_STB)
+
+/* Vertical back porch bits 0..5 */
+#define ILI9322_VBP			0x08
+
+/* Horizontal back porch, 8 bits */
+#define ILI9322_HBP			0x09
+
+/*
+ * Polarity settings:
+ * 1 = positive polarity
+ * 0 = negative polarity
+ */
+#define ILI9322_POL			0x0a
+#define ILI9322_POL_DCLK		BIT(0) /* 1 default */
+#define ILI9322_POL_HSYNC		BIT(1) /* 0 default */
+#define ILI9322_POL_VSYNC		BIT(2) /* 0 default */
+#define ILI9322_POL_DE			BIT(3) /* 1 default */
+/*
+ * 0 means YCBCR are ordered Cb0,Y0,Cr0,Y1,Cb2,Y2,Cr2,Y3 (default)
+ *   in RGB mode this means RGB comes in RGBRGB
+ * 1 means YCBCR are ordered Cr0,Y0,Cb0,Y1,Cr2,Y2,Cb2,Y3
+ *   in RGB mode this means RGB comes in BGRBGR
+ */
+#define ILI9322_POL_YCBCR_MODE		BIT(4)
+/* Formula A for YCbCR->RGB = 0, Formula B = 1 */
+#define ILI9322_POL_FORMULA		BIT(5)
+/* Reverse polarity: 0 = 0..255, 1 = 255..0 */
+#define ILI9322_POL_REV			BIT(6)
+
+#define ILI9322_IF_CTRL			0x0b
+#define ILI9322_IF_CTRL_HSYNC_VSYNC	0x00
+#define ILI9322_IF_CTRL_HSYNC_VSYNC_DE	BIT(2)
+#define ILI9322_IF_CTRL_DE_ONLY		BIT(3)
+#define ILI9322_IF_CTRL_SYNC_DISABLED	(BIT(2)|BIT(3))
+#define ILI9322_IF_CTRL_LINE_INVERSION	BIT(0) /* Not set means frame inv */
+
+#define ILI9322_GLOBAL_RESET		0x04
+#define ILI9322_GLOBAL_RESET_ASSERT	0x00 /* bit 0 = 0 -> reset */
+
+/*
+ * 4+4 bits of negative and positive gamma correction
+ * Upper nybble, bits 4-7 are negative gamma
+ * Lower nybble, bits 0-3 are positive gamma
+ */
+#define ILI9322_GAMMA_1			0x10
+#define ILI9322_GAMMA_2			0x11
+#define ILI9322_GAMMA_3			0x12
+#define ILI9322_GAMMA_4			0x13
+#define ILI9322_GAMMA_5			0x14
+#define ILI9322_GAMMA_6			0x15
+#define ILI9322_GAMMA_7			0x16
+#define ILI9322_GAMMA_8			0x17
+
+/**
+ * enum ili9322_input - the format of the incoming signal to the panel
+ */
+enum ili9322_input {
+	ILI9322_INPUT_SRGB_THROUGH = 0x0,
+	ILI9322_INPUT_SRGB_ALIGNED = 0x1,
+	ILI9322_INPUT_SRGB_DUMMY_320X240 = 0x2,
+	ILI9322_INPUT_SRGB_DUMMY_360X240 = 0x3,
+	ILI9322_INPUT_DISABLED_1 = 0x4,
+	ILI9322_INPUT_PRGB_THROUGH = 0x5,
+	ILI9322_INPUT_PRGB_ALIGNED = 0x6,
+	ILI9322_INPUT_YUV_640X320_YCBCR = 0x7,
+	ILI9322_INPUT_YUV_720X360_YCBCR = 0x8,
+	ILI9322_INPUT_DISABLED_2 = 0x9,
+	ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR = 0xa,
+	ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR = 0xb,
+	ILI9322_INPUT_UNKNOWN = 0xc,
+};
+
+const char *ili9322_inputs[] = {
+	"8 bit serial RGB through",
+	"8 bit serial RGB aligned",
+	"8 bit serial RGB dummy 320x240",
+	"8 bit serial RGB dummy 360x240",
+	"disabled 1",
+	"24 bit parallel RGB through",
+	"24 bit parallel RGB aligned",
+	"24 bit YUV 640Y 320CbCr",
+	"24 bit YUV 720Y 360CbCr",
+	"disabled 2",
+	"8 bit ITU-R BT.656 720Y 360CbCr",
+	"8 bit ITU-R BT.656 640Y 320CbCr",
+};
+
+struct ili9322 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct regmap *regmap;
+	struct regulator_bulk_data supplies[3];
+	struct gpio_desc *reset_gpio;
+	enum ili9322_input input;
+	struct videomode vm;
+	u32 width_mm;
+	u32 height_mm;
+	u8 gamma[8];
+	u8 vreg1out;
+	u8 vcom_high;
+	u8 vcom_amplitude;
+	bool flip_horizontal;
+	bool flip_vertical;
+	u8 syncmode;
+	bool dclk_active_high;
+	bool de_active_high;
+	bool hsync_active_high;
+	bool vsync_active_high;
+};
+
+static inline struct ili9322 *panel_to_ili9322(struct drm_panel *panel)
+{
+	return container_of(panel, struct ili9322, panel);
+}
+
+static int ili9322_regmap_spi_write(void *context, const void *data,
+				    size_t count)
+{
+	struct device *dev = context;
+	struct spi_device *spi = to_spi_device(dev);
+	u8 buf[2];
+
+	/* Clear bit 7 to write */
+	memcpy(buf, data, 2);
+	buf[0] &= ~0x80;
+
+	dev_dbg(dev, "WRITE: %02x %02x\n", buf[0], buf[1]);
+	return spi_write_then_read(spi, buf, 2, NULL, 0);
+}
+
+static int ili9322_regmap_spi_read(void *context, const void *reg,
+				   size_t reg_size, void *val, size_t val_size)
+{
+	struct device *dev = context;
+	struct spi_device *spi = to_spi_device(dev);
+	u8 buf[1];
+
+	/* Set bit 7 to 1 to read */
+	memcpy(buf, reg, 1);
+	dev_dbg(dev, "READ: %02x reg size = %zu, val size = %zu\n",
+		buf[0], reg_size, val_size);
+	buf[0] |= 0x80;
+
+	return spi_write_then_read(spi, buf, 1, val, 1);
+}
+
+static struct regmap_bus ili9322_regmap_bus = {
+	.write = ili9322_regmap_spi_write,
+	.read = ili9322_regmap_spi_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
+	.val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static bool ili9322_volatile_reg(struct device *dev, unsigned int reg)
+{
+	return false;
+}
+
+static bool ili9322_writeable_reg(struct device *dev, unsigned int reg)
+{
+	/* Just register 0 is read-only */
+	if (reg == 0x00)
+		return false;
+	return true;
+}
+
+const struct regmap_config ili9322_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x44,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = ili9322_volatile_reg,
+	.writeable_reg = ili9322_writeable_reg,
+};
+
+static int ili9322_init(struct drm_panel *panel, struct ili9322 *ili)
+{
+	struct drm_connector *connector = panel->connector;
+	u8 reg;
+	int ret;
+	int i;
+
+	/* Reset display */
+	ret = regmap_write(ili->regmap, ILI9322_GLOBAL_RESET,
+			   ILI9322_GLOBAL_RESET_ASSERT);
+	if (ret) {
+		dev_err(ili->dev, "can't issue GRESET (%d)\n", ret);
+		return ret;
+	}
+
+	/* Set up the main voltage regulator */
+	if (ili->vreg1out != U8_MAX) {
+		ret = regmap_write(ili->regmap, ILI9322_VREG1_VOLTAGE,
+				   ili->vreg1out);
+		if (ret) {
+			dev_err(ili->dev, "can't set up VREG1OUT (%d)\n", ret);
+			return ret;
+		}
+	}
+
+	if (ili->vcom_amplitude != U8_MAX) {
+		ret = regmap_write(ili->regmap, ILI9322_VCOM_AMP,
+				   ili->vcom_amplitude);
+		if (ret) {
+			dev_err(ili->dev,
+				"can't set up VCOM amplitude (%d)\n", ret);
+			return ret;
+		}
+	};
+
+	if (ili->vcom_high != U8_MAX) {
+		ret = regmap_write(ili->regmap, ILI9322_VCOM_HIGH,
+				   ili->vcom_high);
+		if (ret) {
+			dev_err(ili->dev, "can't set up VCOM high (%d)\n", ret);
+			return ret;
+		}
+	};
+
+	/* Set up gamma correction */
+	for (i = 0; i < ARRAY_SIZE(ili->gamma); i++) {
+		ret = regmap_write(ili->regmap, ILI9322_GAMMA_1 + i,
+				   ili->gamma[i]);
+		if (ret) {
+			dev_err(ili->dev,
+				"can't write gamma V%d to 0x%02x (%d)\n",
+				i + 1, ILI9322_GAMMA_1 + i, ret);
+			return ret;
+		}
+	}
+
+	/*
+	 * Polarity and inverted color order for RGB input.
+	 * None of this applies in the BT.656 mode.
+	 */
+	if (ili->dclk_active_high) {
+		reg = ILI9322_POL_DCLK;
+		connector->display_info.bus_flags |=
+			DRM_BUS_FLAG_PIXDATA_POSEDGE;
+	} else {
+		reg = 0;
+		connector->display_info.bus_flags |=
+			DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+	}
+	if (ili->de_active_high) {
+		reg |= ILI9322_POL_DE;
+		connector->display_info.bus_flags |=
+			DRM_BUS_FLAG_DE_HIGH;
+	} else {
+		connector->display_info.bus_flags |=
+			DRM_BUS_FLAG_DE_LOW;
+	}
+	if (ili->hsync_active_high)
+		reg |= ILI9322_POL_HSYNC;
+	if (ili->vsync_active_high)
+		reg |= ILI9322_POL_VSYNC;
+	ret = regmap_write(ili->regmap, ILI9322_POL, reg);
+	if (ret) {
+		dev_err(ili->dev, "can't write POL register (%d)\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Set up interface control.
+	 * This is not used in the BT.656 mode (no H/Vsync or DE signals).
+	 */
+	reg = ili->syncmode;
+	reg |= ILI9322_IF_CTRL_LINE_INVERSION;
+	ret = regmap_write(ili->regmap, ILI9322_IF_CTRL, reg);
+	if (ret) {
+		dev_err(ili->dev, "can't write IF CTRL register (%d)\n", ret);
+		return ret;
+	}
+
+	/* Set up the input mode */
+	reg = (ili->input << 4);
+	/* These are inverted, setting to 1 is the default, clearing flips */
+	if (!ili->flip_horizontal)
+		reg |= ILI9322_ENTRY_HDIR;
+	if (!ili->flip_vertical)
+		reg |= ILI9322_ENTRY_VDIR;
+	reg |= ILI9322_ENTRY_AUTODETECT;
+	ret = regmap_write(ili->regmap, ILI9322_ENTRY, reg);
+	if (ret) {
+		dev_err(ili->dev, "can't write ENTRY reg (%d)\n", ret);
+		return ret;
+	}
+	dev_info(ili->dev, "display is in %s mode, syncmode %02x\n",
+		 ili9322_inputs[ili->input],
+		 ili->syncmode);
+
+	dev_info(ili->dev, "initialized display\n");
+
+	return 0;
+}
+
+/*
+ * This power-on sequence if from the datasheet, page 57.
+ */
+static int ili9322_power_on(struct ili9322 *ili)
+{
+	int ret;
+
+	/* Assert RESET */
+	gpiod_set_value(ili->reset_gpio, 1);
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ili->supplies), ili->supplies);
+	if (ret < 0) {
+		dev_err(ili->dev, "unable to enable regulators\n");
+		return ret;
+	}
+	msleep(20);
+
+	/* De-assert RESET */
+	gpiod_set_value(ili->reset_gpio, 0);
+
+	msleep(10);
+
+	return 0;
+}
+
+static int ili9322_power_off(struct ili9322 *ili)
+{
+	return regulator_bulk_disable(ARRAY_SIZE(ili->supplies), ili->supplies);
+}
+
+static int ili9322_disable(struct drm_panel *panel)
+{
+	struct ili9322 *ili = panel_to_ili9322(panel);
+	int ret;
+
+	ret = regmap_write(ili->regmap, ILI9322_POW_CTRL,
+			   ILI9322_POW_CTRL_STANDBY);
+	if (ret) {
+		dev_err(ili->dev, "unable to go to standby mode\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ili9322_unprepare(struct drm_panel *panel)
+{
+	struct ili9322 *ili = panel_to_ili9322(panel);
+
+	return ili9322_power_off(ili);
+}
+
+static int ili9322_prepare(struct drm_panel *panel)
+{
+	struct ili9322 *ili = panel_to_ili9322(panel);
+	int ret;
+
+	ret = ili9322_power_on(ili);
+	if (ret < 0)
+		return ret;
+
+	ret = ili9322_init(panel, ili);
+	if (ret < 0)
+		ili9322_unprepare(panel);
+
+	return ret;
+}
+
+static int ili9322_enable(struct drm_panel *panel)
+{
+	struct ili9322 *ili = panel_to_ili9322(panel);
+	int ret;
+
+	ret = regmap_write(ili->regmap, ILI9322_POW_CTRL,
+			   ILI9322_POW_CTRL_DEFAULT);
+	if (ret) {
+		dev_err(ili->dev, "unable to enable panel\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+/* Serial RGB modes */
+static const struct drm_display_mode srgb_320x240_mode = {
+	.clock = 2453500,
+	.hdisplay = 320,
+	.hsync_start = 320 + 359,
+	.hsync_end = 320 + 359 + 1,
+	.htotal = 320 + 359 + 1 + 241,
+	.vdisplay = 240,
+	.vsync_start = 240 + 4,
+	.vsync_end = 240 + 4 + 1,
+	.vtotal = 262,
+	.vrefresh = 60,
+	.flags = 0,
+};
+
+static const struct drm_display_mode srgb_360x240_mode = {
+	.clock = 2700000,
+	.hdisplay = 360,
+	.hsync_start = 360 + 35,
+	.hsync_end = 360 + 35 + 1,
+	.htotal = 360 + 35 + 1 + 241,
+	.vdisplay = 240,
+	.vsync_start = 240 + 21,
+	.vsync_end = 240 + 21 + 1,
+	.vtotal = 262,
+	.vrefresh = 60,
+	.flags = 0,
+};
+
+/* This is the only mode listed for parallel RGB in the datasheet */
+static const struct drm_display_mode prgb_320x240_mode = {
+	.clock = 6400000,
+	.hdisplay = 320,
+	.hsync_start = 320 + 38,
+	.hsync_end = 320 + 38 + 1,
+	.htotal = 320 + 38 + 1 + 50,
+	.vdisplay = 240,
+	.vsync_start = 240 + 4,
+	.vsync_end = 240 + 4 + 1,
+	.vtotal = 262,
+	.vrefresh = 60,
+	.flags = 0,
+};
+
+/* YUV modes */
+static const struct drm_display_mode yuv_640x320_mode = {
+	.clock = 2454000,
+	.hdisplay = 640,
+	.hsync_start = 640 + 252,
+	.hsync_end = 640 + 252 + 1,
+	.htotal = 640 + 252 + 1 + 28,
+	.vdisplay = 320,
+	.vsync_start = 320 + 4,
+	.vsync_end = 320 + 4 + 1,
+	.vtotal = 320 + 4 + 1 + 18,
+	.vrefresh = 60,
+	.flags = 0,
+};
+
+static const struct drm_display_mode yuv_720x360_mode = {
+	.clock = 2700000,
+	.hdisplay = 720,
+	.hsync_start = 720 + 252,
+	.hsync_end = 720 + 252 + 1,
+	.htotal = 720 + 252 + 1 + 24,
+	.vdisplay = 360,
+	.vsync_start = 360 + 4,
+	.vsync_end = 360 + 4 + 1,
+	.vtotal = 360 + 4 + 1 + 18,
+	.vrefresh = 60,
+	.flags = 0,
+};
+
+/* BT.656 VGA mode, 640x480 */
+static const struct drm_display_mode itu_r_bt_656_640_mode = {
+	.clock = 2454000,
+	.hdisplay = 640,
+	.hsync_start = 640 + 3,
+	.hsync_end = 640 + 3 + 1,
+	.htotal = 640 + 3 + 1 + 272,
+	.vdisplay = 480,
+	.vsync_start = 480 + 4,
+	.vsync_end = 480 + 4 + 1,
+	.vtotal = 500,
+	.vrefresh = 60,
+	.flags = 0,
+};
+
+/* BT.656 D1 mode 720x480 */
+static const struct drm_display_mode itu_r_bt_656_720_mode = {
+	.clock = 2700000,
+	.hdisplay = 720,
+	.hsync_start = 720 + 3,
+	.hsync_end = 720 + 3 + 1,
+	.htotal = 720 + 3 + 1 + 272,
+	.vdisplay = 480,
+	.vsync_start = 480 + 4,
+	.vsync_end = 480 + 4 + 1,
+	.vtotal = 500,
+	.vrefresh = 60,
+	.flags = 0,
+};
+
+static int ili9322_get_modes(struct drm_panel *panel)
+{
+	struct drm_connector *connector = panel->connector;
+	struct ili9322 *ili = panel_to_ili9322(panel);
+	struct drm_display_mode *mode;
+
+	strncpy(connector->display_info.name, "ILI9322 TFT LCD driver\0",
+		DRM_DISPLAY_INFO_LEN);
+	connector->display_info.width_mm = ili->width_mm;
+	connector->display_info.height_mm = ili->height_mm;
+
+	switch (ili->input) {
+	case ILI9322_INPUT_SRGB_DUMMY_320X240:
+		mode = drm_mode_duplicate(panel->drm, &srgb_320x240_mode);
+		break;
+	case ILI9322_INPUT_SRGB_DUMMY_360X240:
+		mode = drm_mode_duplicate(panel->drm, &srgb_360x240_mode);
+		break;
+	case ILI9322_INPUT_PRGB_THROUGH:
+	case ILI9322_INPUT_PRGB_ALIGNED:
+		mode = drm_mode_duplicate(panel->drm, &prgb_320x240_mode);
+		break;
+	case ILI9322_INPUT_YUV_640X320_YCBCR:
+		mode = drm_mode_duplicate(panel->drm, &yuv_640x320_mode);
+		break;
+	case ILI9322_INPUT_YUV_720X360_YCBCR:
+		mode = drm_mode_duplicate(panel->drm, &yuv_720x360_mode);
+		break;
+	case ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR:
+		mode = drm_mode_duplicate(panel->drm, &itu_r_bt_656_720_mode);
+		break;
+	case ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR:
+		mode = drm_mode_duplicate(panel->drm, &itu_r_bt_656_640_mode);
+		break;
+	default:
+		mode = NULL;
+		break;
+	}
+	if (!mode) {
+		DRM_ERROR("bad mode or failed to add mode\n");
+		return -EINVAL;
+	}
+	drm_mode_set_name(mode);
+	/*
+	 * This is the preferred mode because most people are going
+	 * to want to use the display with VGA type graphics.
+	 */
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+	/* This polairity is configured from the device tree */
+	if (ili->hsync_active_high)
+		mode->flags |= DRM_MODE_FLAG_PHSYNC;
+	else
+		mode->flags |= DRM_MODE_FLAG_NHSYNC;
+	if (ili->vsync_active_high)
+		mode->flags |= DRM_MODE_FLAG_PVSYNC;
+	else
+		mode->flags |= DRM_MODE_FLAG_NVSYNC;
+
+	mode->width_mm = ili->width_mm;
+	mode->height_mm = ili->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1; /* Number of modes */
+}
+
+static const struct drm_panel_funcs ili9322_drm_funcs = {
+	.disable = ili9322_disable,
+	.unprepare = ili9322_unprepare,
+	.prepare = ili9322_prepare,
+	.enable = ili9322_enable,
+	.get_modes = ili9322_get_modes,
+};
+
+static int ili9322_parse_dt(struct ili9322 *ili)
+{
+	struct device *dev = ili->dev;
+	struct device_node *np = dev->of_node;
+	bool has_de = false;
+	bool has_hsync = false;
+	bool has_vsync = false;
+	u8 gamma;
+	u32 val;
+	int ret;
+	int i;
+
+	of_property_read_u32(np, "width-mm", &ili->width_mm);
+	of_property_read_u32(np, "height-mm", &ili->height_mm);
+
+	if (!of_property_read_u32(np, "ilitek,entry-mode", &val)) {
+		if (val < ILI9322_INPUT_UNKNOWN) {
+			ili->input = val;
+		} else {
+			dev_info(ili->dev, "invalid entry mode %u", val);
+			ili->input = ILI9322_INPUT_UNKNOWN;
+		}
+	} else {
+		ili->input = ILI9322_INPUT_UNKNOWN;
+	}
+
+	if (!of_property_read_u32(np, "ilitek,vreg1out-microvolt", &val)) {
+		if (val < 3600) {
+			dev_err(dev, "too low VREG1OUT\n");
+			return -EINVAL;
+		}
+		if (val > 6000) {
+			dev_err(dev, "too high VREG1OUT\n");
+			return -EINVAL;
+		}
+		if ((val % 100) != 0) {
+			dev_err(dev, "VREG1OUT is no even 100 microvolt\n");
+			return -EINVAL;
+		}
+		val -= 3600;
+		val /= 100;
+		dev_dbg(dev, "VREG1OUT = 0x%02x\n", val);
+		ili->vreg1out = val;
+	} else {
+		/* Default HW value, do not touch (should be 4.5V) */
+		ili->vreg1out = U8_MAX;
+	}
+
+	if (!of_property_read_u32(np, "ilitek,vcom-high-percent", &val)) {
+		if (val < 37) {
+			dev_err(dev, "too low VCOM high\n");
+			return -EINVAL;
+		}
+		if (val > 100) {
+			dev_err(dev, "too high VCOM high\n");
+			return -EINVAL;
+		}
+		val -= 37;
+		dev_dbg(dev, "VCOM high = 0x%02x\n", val);
+		ili->vcom_high = val;
+
+	} else {
+		/* Default HW value, do not touch (should be 91%) */
+		ili->vcom_high = U8_MAX;
+	}
+
+	if (!of_property_read_u32(np, "ilitek,vcom-amplitude-percent", &val)) {
+		if (val < 70) {
+			dev_err(dev, "too low VCOM amplitude\n");
+			return -EINVAL;
+		}
+		if (val > 132) {
+			dev_err(dev, "too high VCOM amplitude\n");
+			return -EINVAL;
+		}
+		val -= 70;
+		val >>= 1; /* Increments of 2% */
+		dev_dbg(dev, "VCOM amplitude = 0x%02x\n", val);
+		ili->vcom_amplitude = val;
+
+	} else {
+		/* Default HW value, do not touch (should be 114%) */
+		ili->vcom_high = U8_MAX;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ili->gamma); i++) {
+		ret = of_property_read_u32_index(np,
+						 "ilitek,gamma-correction-neg",
+						 i, &val);
+		if (ret) {
+			dev_err(dev, "failed to parse negative gamma\n");
+			return ret;
+		}
+		if (val > 15) {
+			dev_err(dev, "negative gamma %u > 15, capping\n", val);
+			val = 15;
+		}
+		gamma = val << 4;
+		ret = of_property_read_u32_index(np,
+						 "ilitek,gamma-correction-pos",
+						 i, &val);
+		if (ret) {
+			dev_err(dev, "failed to parse positive gamma\n");
+			return ret;
+		}
+		if (val > 15) {
+			dev_err(dev, "positive gamma %u > 15, capping\n", val);
+			val = 15;
+		}
+		gamma |= val;
+		ili->gamma[i] = gamma;
+		dev_dbg(dev, "gamma V%d: 0x%02x\n", i + 1, gamma);
+	}
+
+	if (of_property_read_bool(np, "flip-horizontal"))
+		ili->flip_horizontal = true;
+	if (of_property_read_bool(np, "flip-vertical"))
+		ili->flip_vertical = true;
+
+	/* The applicable subset of timing settings */
+	if (!of_property_read_u32(np, "de-active", &val)) {
+		has_de = true;
+		if (val)
+			ili->de_active_high = true;
+	}
+	/* If not set, assume active low (HW default) */
+	if (!of_property_read_u32(np, "hsync-active", &val)) {
+		has_hsync = true;
+		if (val)
+			ili->hsync_active_high = true;
+	}
+	if (!of_property_read_u32(np, "vsync-active", &val)) {
+		has_vsync = true;
+		if (val)
+			ili->vsync_active_high = true;
+	}
+	if (!of_property_read_u32(np, "pixelclk-active", &val)) {
+		if (val)
+			ili->dclk_active_high = true;
+	} else {
+		/* If not set, assume active high (HW default) */
+		ili->dclk_active_high = true;
+	}
+
+	/* Set up the sync mode depending on what syncs were specified */
+	if (has_de && has_hsync && has_vsync)
+		ili->syncmode = ILI9322_IF_CTRL_HSYNC_VSYNC_DE;
+	else if (has_hsync && has_vsync)
+		ili->syncmode = ILI9322_IF_CTRL_HSYNC_VSYNC;
+	else if (has_de)
+		ili->syncmode = ILI9322_IF_CTRL_DE_ONLY;
+	else
+		ili->syncmode = ILI9322_IF_CTRL_SYNC_DISABLED;
+
+	return 0;
+}
+
+static int ili9322_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct ili9322 *ili;
+	const struct regmap_config *regmap_config;
+	u32 val;
+	int ret;
+
+	ili = devm_kzalloc(dev, sizeof(struct ili9322), GFP_KERNEL);
+	if (!ili)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, ili);
+
+	ili->dev = dev;
+
+	ret = ili9322_parse_dt(ili);
+	if (ret < 0)
+		return ret;
+
+	ili->supplies[0].supply = "vcc"; /* 2.7-3.6 V */
+	ili->supplies[1].supply = "iovcc"; /* 1.65-3.6V */
+	ili->supplies[2].supply = "vci"; /* 2.7-3.6V */
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ili->supplies),
+				      ili->supplies);
+	if (ret < 0)
+		return ret;
+	ret = regulator_set_voltage(ili->supplies[0].consumer,
+				    2700000, 3600000);
+	if (ret)
+		return ret;
+	ret = regulator_set_voltage(ili->supplies[1].consumer,
+				    1650000, 3600000);
+	if (ret)
+		return ret;
+	ret = regulator_set_voltage(ili->supplies[2].consumer,
+				    2700000, 3600000);
+	if (ret)
+		return ret;
+
+	ili->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ili->reset_gpio)) {
+		dev_err(dev, "failed to get RESET GPIO\n");
+		return PTR_ERR(ili->reset_gpio);
+	}
+
+	spi->bits_per_word = 8;
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(dev, "spi setup failed.\n");
+		return ret;
+	}
+	regmap_config = &ili9322_regmap_config;
+	ili->regmap = devm_regmap_init(dev, &ili9322_regmap_bus, dev,
+				       regmap_config);
+	if (IS_ERR(ili->regmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(ili->regmap);
+	}
+
+	ret = regmap_read(ili->regmap, ILI9322_CHIP_ID, &val);
+	if (ret) {
+		dev_err(dev, "can't get chip ID (%d)\n", ret);
+		return ret;
+	}
+	if (val != ILI9322_CHIP_ID_MAGIC) {
+		dev_err(dev, "chip ID 0x%0x2, expected 0x%02x\n", val,
+			ILI9322_CHIP_ID_MAGIC);
+		return -ENODEV;
+	}
+
+	/* Probe the system to find the display setting */
+	if (ili->input == ILI9322_INPUT_UNKNOWN) {
+		ret = regmap_read(ili->regmap, ILI9322_ENTRY, &val);
+		if (ret) {
+			dev_err(dev, "can't get entry setting (%d)\n", ret);
+			return ret;
+		}
+		/* Input enum corresponds to HW setting */
+		ili->input = (val >> 4) & 0x0f;
+		if (ili->input >= ILI9322_INPUT_UNKNOWN)
+			ili->input = ILI9322_INPUT_UNKNOWN;
+	}
+
+	drm_panel_init(&ili->panel);
+	ili->panel.dev = dev;
+	ili->panel.funcs = &ili9322_drm_funcs;
+
+	return drm_panel_add(&ili->panel);
+}
+
+static int ili9322_remove(struct spi_device *spi)
+{
+	struct ili9322 *ili = spi_get_drvdata(spi);
+
+	ili9322_power_off(ili);
+	drm_panel_remove(&ili->panel);
+
+	return 0;
+}
+
+static const struct of_device_id ili9322_of_match[] = {
+	{ .compatible = "ilitek,ili9322" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ili9322_of_match);
+
+static struct spi_driver ili9322_driver = {
+	.probe = ili9322_probe,
+	.remove = ili9322_remove,
+	.driver = {
+		.name = "panel-ilitek-ili9322",
+		.of_match_table = ili9322_of_match,
+	},
+};
+module_spi_driver(ili9322_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("ILI9322 LCD panel driver");
+MODULE_LICENSE("GPL v2");