@@ -16,7 +16,6 @@ CFLAGS += $(WERROR_FLAGS)
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include
-CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common
LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
LDLIBS += -lrte_ethdev
@@ -91,7 +91,8 @@ fslmc_get_container_group(int *groupid)
}
/* get group number */
- ret = vfio_get_group_no(SYSFS_FSL_MC_DEVICES, g_container, groupid);
+ ret = rte_vfio_get_group_num(SYSFS_FSL_MC_DEVICES,
+ g_container, groupid);
if (ret <= 0) {
DPAA2_BUS_ERR("Unable to find %s IOMMU group", g_container);
return -1;
@@ -124,7 +125,7 @@ vfio_connect_container(void)
}
/* Opens main vfio file descriptor which represents the "container" */
- fd = vfio_get_container_fd();
+ fd = rte_vfio_get_container_fd();
if (fd < 0) {
DPAA2_BUS_ERR("Failed to open VFIO container");
return -errno;
@@ -620,7 +621,7 @@ fslmc_vfio_setup_group(void)
}
/* Get the actual group fd */
- ret = vfio_get_group_fd(groupid);
+ ret = rte_vfio_get_group_fd(groupid);
if (ret < 0)
return ret;
vfio_group.fd = ret;
@@ -10,8 +10,6 @@
#include <rte_vfio.h>
-#include "eal_vfio.h"
-
#define DPAA2_MC_DPNI_DEVID 7
#define DPAA2_MC_DPSECI_DEVID 3
#define DPAA2_MC_DPCON_DEVID 5
@@ -22,6 +22,5 @@ sources = files('fslmc_bus.c',
allow_experimental_apis = true
-includes += include_directories('../../../lib/librte_eal/linuxapp/eal')
includes += include_directories('mc', 'qbman/include', 'portal')
cflags += ['-D_GNU_SOURCE']
@@ -781,3 +781,23 @@ int rte_vfio_clear_group(__rte_unused int vfio_group_fd)
{
return 0;
}
+
+int __rte_experimental
+rte_vfio_get_group_num(__rte_unused const char *sysfs_base,
+ __rte_unused const char *dev_addr,
+ __rte_unused int *iommu_group_num)
+{
+ return -1;
+}
+
+int __rte_experimental
+rte_vfio_get_container_fd(void)
+{
+ return -1;
+}
+
+int __rte_experimental
+rte_vfio_get_group_fd(__rte_unused int iommu_group_num)
+{
+ return -1;
+}
@@ -37,6 +37,13 @@
extern "C" {
#endif
+/* NOIOMMU is defined from kernel version 4.5 onwards */
+#ifdef VFIO_NOIOMMU_IOMMU
+#define RTE_VFIO_NOIOMMU VFIO_NOIOMMU_IOMMU
+#else
+#define RTE_VFIO_NOIOMMU 8
+#endif
+
/**
* Setup vfio_cfg for the device identified by its address.
* It discovers the configured I/O MMU groups or sets a new one for the device.
@@ -128,10 +135,76 @@ int rte_vfio_is_enabled(const char *modname);
*/
int rte_vfio_noiommu_is_enabled(void);
-/* remove group fd from internal VFIO group fd array */
+/**
+ * Remove group fd from internal VFIO group fd array/
+ *
+ * This function is only relevant to linux and will return
+ * an error on BSD.
+ *
+ * @param vfio_group_fd
+ * VFIO Grouup FD.
+ *
+ * @return
+ * 0 on success.
+ * <0 on failure.
+ */
int
rte_vfio_clear_group(int vfio_group_fd);
+/**
+ * Parse IOMMU group number for a device
+ *
+ * This function is only relevant to linux and will return
+ * an error on BSD.
+ *
+ * @param sysfs_base
+ * sysfs path prefix.
+ *
+ * @param dev_addr
+ * device location.
+ *
+ * @param iommu_group_num
+ * iommu group number
+ *
+ * @return
+ * >0 on success
+ * 0 for non-existent group or VFIO
+ * <0 for errors
+ */
+int __rte_experimental
+rte_vfio_get_group_num(const char *sysfs_base,
+ const char *dev_addr,
+ int *iommu_group_num);
+
+/**
+ * Open VFIO container fd or get an existing one
+ *
+ * This function is only relevant to linux and will return
+ * an error on BSD.
+ *
+ * @return
+ * > 0 container fd
+ * < 0 for errors
+ */
+int __rte_experimental
+rte_vfio_get_container_fd(void);
+
+/**
+ * Open VFIO group fd or get an existing one
+ *
+ * This function is only relevant to linux and will return
+ * an error on BSD.
+ *
+ * @param iommu_group_num
+ * iommu group number
+ *
+ * @return
+ * > 0 group fd
+ * < 0 for errors
+ */
+int __rte_experimental
+rte_vfio_get_group_fd(int iommu_group_num);
+
#ifdef __cplusplus
}
#endif
@@ -36,7 +36,7 @@ static const struct vfio_iommu_type iommu_types[] = {
};
int
-vfio_get_group_fd(int iommu_group_no)
+rte_vfio_get_group_fd(int iommu_group_num)
{
int i;
int vfio_group_fd;
@@ -45,7 +45,7 @@ vfio_get_group_fd(int iommu_group_no)
/* check if we already have the group descriptor open */
for (i = 0; i < VFIO_MAX_GROUPS; i++)
- if (vfio_cfg.vfio_groups[i].group_no == iommu_group_no)
+ if (vfio_cfg.vfio_groups[i].group_no == iommu_group_num)
return vfio_cfg.vfio_groups[i].fd;
/* Lets see first if there is room for a new group */
@@ -70,7 +70,7 @@ vfio_get_group_fd(int iommu_group_no)
if (internal_config.process_type == RTE_PROC_PRIMARY) {
/* try regular group format */
snprintf(filename, sizeof(filename),
- VFIO_GROUP_FMT, iommu_group_no);
+ VFIO_GROUP_FMT, iommu_group_num);
vfio_group_fd = open(filename, O_RDWR);
if (vfio_group_fd < 0) {
/* if file not found, it's not an error */
@@ -82,7 +82,7 @@ vfio_get_group_fd(int iommu_group_no)
/* special case: try no-IOMMU path as well */
snprintf(filename, sizeof(filename),
- VFIO_NOIOMMU_GROUP_FMT, iommu_group_no);
+ VFIO_NOIOMMU_GROUP_FMT, iommu_group_num);
vfio_group_fd = open(filename, O_RDWR);
if (vfio_group_fd < 0) {
if (errno != ENOENT) {
@@ -95,7 +95,7 @@ vfio_get_group_fd(int iommu_group_no)
/* noiommu group found */
}
- cur_grp->group_no = iommu_group_no;
+ cur_grp->group_no = iommu_group_num;
cur_grp->fd = vfio_group_fd;
vfio_cfg.vfio_active_groups++;
return vfio_group_fd;
@@ -117,7 +117,7 @@ vfio_get_group_fd(int iommu_group_no)
close(socket_fd);
return -1;
}
- if (vfio_mp_sync_send_request(socket_fd, iommu_group_no) < 0) {
+ if (vfio_mp_sync_send_request(socket_fd, iommu_group_num) < 0) {
RTE_LOG(ERR, EAL, " cannot send group number!\n");
close(socket_fd);
return -1;
@@ -132,7 +132,7 @@ vfio_get_group_fd(int iommu_group_no)
/* if we got the fd, store it and return it */
if (vfio_group_fd > 0) {
close(socket_fd);
- cur_grp->group_no = iommu_group_no;
+ cur_grp->group_no = iommu_group_num;
cur_grp->fd = vfio_group_fd;
vfio_cfg.vfio_active_groups++;
return vfio_group_fd;
@@ -262,11 +262,11 @@ rte_vfio_setup_device(const char *sysfs_base, const char *dev_addr,
.argsz = sizeof(group_status)
};
int vfio_group_fd;
- int iommu_group_no;
+ int iommu_group_num;
int ret;
/* get group number */
- ret = vfio_get_group_no(sysfs_base, dev_addr, &iommu_group_no);
+ ret = rte_vfio_get_group_num(sysfs_base, dev_addr, &iommu_group_num);
if (ret == 0) {
RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n",
dev_addr);
@@ -278,7 +278,7 @@ rte_vfio_setup_device(const char *sysfs_base, const char *dev_addr,
return -1;
/* get the actual group fd */
- vfio_group_fd = vfio_get_group_fd(iommu_group_no);
+ vfio_group_fd = rte_vfio_get_group_fd(iommu_group_num);
if (vfio_group_fd < 0)
return -1;
@@ -394,11 +394,11 @@ rte_vfio_release_device(const char *sysfs_base, const char *dev_addr,
.argsz = sizeof(group_status)
};
int vfio_group_fd;
- int iommu_group_no;
+ int iommu_group_num;
int ret;
/* get group number */
- ret = vfio_get_group_no(sysfs_base, dev_addr, &iommu_group_no);
+ ret = rte_vfio_get_group_num(sysfs_base, dev_addr, &iommu_group_num);
if (ret <= 0) {
RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver\n",
dev_addr);
@@ -407,9 +407,9 @@ rte_vfio_release_device(const char *sysfs_base, const char *dev_addr,
}
/* get the actual group fd */
- vfio_group_fd = vfio_get_group_fd(iommu_group_no);
+ vfio_group_fd = rte_vfio_get_group_fd(iommu_group_num);
if (vfio_group_fd <= 0) {
- RTE_LOG(INFO, EAL, "vfio_get_group_fd failed for %s\n",
+ RTE_LOG(INFO, EAL, "rte_vfio_get_group_fd failed for %s\n",
dev_addr);
return -1;
}
@@ -480,7 +480,7 @@ rte_vfio_enable(const char *modname)
return 0;
}
- vfio_cfg.vfio_container_fd = vfio_get_container_fd();
+ vfio_cfg.vfio_container_fd = rte_vfio_get_container_fd();
/* check if we have VFIO driver enabled */
if (vfio_cfg.vfio_container_fd != -1) {
@@ -558,7 +558,7 @@ vfio_has_supported_extensions(int vfio_container_fd)
}
int
-vfio_get_container_fd(void)
+rte_vfio_get_container_fd(void)
{
int ret, vfio_container_fd;
@@ -622,8 +622,8 @@ vfio_get_container_fd(void)
}
int
-vfio_get_group_no(const char *sysfs_base,
- const char *dev_addr, int *iommu_group_no)
+rte_vfio_get_group_num(const char *sysfs_base,
+ const char *dev_addr, int *iommu_group_num)
{
char linkname[PATH_MAX];
char filename[PATH_MAX];
@@ -655,7 +655,7 @@ vfio_get_group_no(const char *sysfs_base,
errno = 0;
group_tok = tok[ret - 1];
end = group_tok;
- *iommu_group_no = strtol(group_tok, &end, 10);
+ *iommu_group_num = strtol(group_tok, &end, 10);
if ((end != group_tok && *end != '\0') || errno != 0) {
RTE_LOG(ERR, EAL, " %s error parsing IOMMU number!\n", dev_addr);
return -1;
@@ -79,12 +79,6 @@ struct vfio_iommu_spapr_tce_info {
#define RTE_VFIO_SPAPR VFIO_SPAPR_TCE_v2_IOMMU
#endif
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0)
-#define RTE_VFIO_NOIOMMU 8
-#else
-#define RTE_VFIO_NOIOMMU VFIO_NOIOMMU_IOMMU
-#endif
-
#define VFIO_MAX_GROUPS RTE_MAX_VFIO_GROUPS
/*
@@ -133,21 +127,6 @@ vfio_set_iommu_type(int vfio_container_fd);
int
vfio_has_supported_extensions(int vfio_container_fd);
-/* open container fd or get an existing one */
-int
-vfio_get_container_fd(void);
-
-/* parse IOMMU group number for a device
- * returns 1 on success, -1 for errors, 0 for non-existent group
- */
-int
-vfio_get_group_no(const char *sysfs_base,
- const char *dev_addr, int *iommu_group_no);
-
-/* open group fd or get an existing one */
-int
-vfio_get_group_fd(int iommu_group_no);
-
int vfio_mp_sync_setup(void);
#define SOCKET_REQ_CONTAINER 0x100
@@ -267,7 +267,7 @@ vfio_mp_sync_thread(void __rte_unused * arg)
switch (ret) {
case SOCKET_REQ_CONTAINER:
- fd = vfio_get_container_fd();
+ fd = rte_vfio_get_container_fd();
if (fd < 0)
vfio_mp_sync_send_request(conn_sock, SOCKET_ERR);
else
@@ -283,7 +283,7 @@ vfio_mp_sync_thread(void __rte_unused * arg)
continue;
}
- fd = vfio_get_group_fd(vfio_data);
+ fd = rte_vfio_get_group_fd(vfio_data);
if (fd < 0)
vfio_mp_sync_send_request(conn_sock, SOCKET_ERR);
@@ -255,5 +255,8 @@ EXPERIMENTAL {
rte_service_set_runstate_mapped_check;
rte_service_set_stats_enable;
rte_service_start_with_defaults;
+ rte_vfio_get_group_num;
+ rte_vfio_get_container_fd;
+ rte_vfio_get_group_fd;
} DPDK_18.02;