diff mbox series

[12/12] ASoC: Intel: sof_rt5682: use RT5682S_PLL1 if needed

Message ID 20240411220347.131267-13-pierre-louis.bossart@linux.intel.com
State New
Headers show
Series ASoC: Intel: updates for 6.10 - part4 | expand

Commit Message

Pierre-Louis Bossart April 11, 2024, 10:03 p.m. UTC 
From: Bard Liao <yung-chuan.liao@linux.intel.com>

When 96KHz sample rate is used, and MCLK is 24.576MHz, we will need
pll_in = 24576000 and pll_out = 49152000 which is not supported by
RT5682S_PLL2. Use RT5682S_PLL1 in this case.
We don't test sample rate because RT5682S_PLL2 doesn't support 24.576MHz
input and in the MCLK = 24.576MHz, sample rate = 48KHz case, i.e.
pll_in == pll_out, PLL will not be used at all.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/soc/intel/boards/sof_rt5682.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c
index 735e07ea62bd..062012de3de2 100644
--- a/sound/soc/intel/boards/sof_rt5682.c
+++ b/sound/soc/intel/boards/sof_rt5682.c
@@ -340,8 +340,19 @@  static int sof_rt5682_hw_params(struct snd_pcm_substream *substream,
 		clk_id = RT5682_SCLK_S_PLL1;
 		break;
 	case CODEC_RT5682S:
-		pll_id = RT5682S_PLL2;
-		clk_id = RT5682S_SCLK_S_PLL2;
+		/*
+		 * For MCLK = 24.576MHz and sample rate = 96KHz case, use PLL1  We don't test
+		 * pll_out or params_rate() here since rt5682s PLL2 doesn't support 24.576MHz
+		 * input, so we have no choice but to use PLL1. Besides, we will not use PLL at
+		 * all if pll_in == pll_out. ex, MCLK = 24.576Mhz and sample rate = 48KHz
+		 */
+		if (pll_in == 24576000) {
+			pll_id = RT5682S_PLL1;
+			clk_id = RT5682S_SCLK_S_PLL1;
+		} else {
+			pll_id = RT5682S_PLL2;
+			clk_id = RT5682S_SCLK_S_PLL2;
+		}
 		break;
 	default:
 		dev_err(rtd->dev, "invalid codec type %d\n", ctx->codec_type);