new file mode 100644
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/slimbus/qcom,slim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC SLIMbus controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+ SLIMbus controller used when applications processor controls SLIMbus master
+ component.
+
+allOf:
+ - $ref: slimbus.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,apq8064-slim
+ - const: qcom,slim
+
+ reg:
+ items:
+ - description: Physical address of controller register blocks
+ - description: SLEW RATE register
+
+ reg-names:
+ items:
+ - const: ctrl
+ - const: slew
+
+ clocks:
+ items:
+ - description: Interface clock for this controller
+ - description: Interrupt for controller core's BAM
+
+ clock-names:
+ items:
+ - const: iface
+ - const: core
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+ #include <dt-bindings/clock/qcom,lcc-msm8960.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ slim@28080000 {
+ compatible = "qcom,apq8064-slim", "qcom,slim";
+ reg = <0x28080000 0x2000>, <0x80207c 4>;
+ reg-names = "ctrl", "slew";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+ clock-names = "iface", "core";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ audio-codec@1,0 {
+ compatible = "slim217,60";
+ reg = <1 0>;
+ };
+ };
+ };
deleted file mode 100644
@@ -1,36 +0,0 @@
-Qualcomm SLIMbus controller
-This controller is used if applications processor driver controls SLIMbus
-master component.
-
-Required properties:
-
- - reg : Offset and length of the register region(s) for the device
- - reg-names : Register region name(s) referenced in reg above
- Required register resource entries are:
- "ctrl": Physical address of controller register blocks
- "slew": required for "qcom,apq8064-slim" SOC.
- - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible
- followed by "qcom,slim" for fallback.
- - interrupts : Interrupt number used by this controller
- - clocks : Interface and core clocks used by this SLIMbus controller
- - clock-names : Required clock-name entries are:
- "iface" : Interface clock for this controller
- "core" : Interrupt for controller core's BAM
-
-Example:
-
- slim@28080000 {
- compatible = "qcom,apq8064-slim", "qcom,slim";
- reg = <0x28080000 0x2000>, <0x80207C 4>;
- reg-names = "ctrl", "slew";
- interrupts = <0 33 0>;
- clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
- clock-names = "iface", "core";
- #address-cells = <2>;
- #size-cell = <0>;
-
- wcd9310: audio-codec@1,0{
- compatible = "slim217,60";
- reg = <1 0>;
- };
- };