@@ -4,6 +4,9 @@
*/
#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
@@ -13,11 +16,6 @@
#include <linux/regmap.h>
#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-
-#include <linux/dma-mapping.h>
-
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -35,39 +33,39 @@
#define JZ_REG_AIC_CLK_DIV 0x30
#define JZ_REG_AIC_FIFO 0x34
-#define JZ_AIC_CONF_OVERFLOW_PLAY_LAST BIT(6)
-#define JZ_AIC_CONF_INTERNAL_CODEC BIT(5)
-#define JZ_AIC_CONF_I2S BIT(4)
-#define JZ_AIC_CONF_RESET BIT(3)
-#define JZ_AIC_CONF_BIT_CLK_MASTER BIT(2)
-#define JZ_AIC_CONF_SYNC_CLK_MASTER BIT(1)
-#define JZ_AIC_CONF_ENABLE BIT(0)
-
-#define JZ_AIC_CTRL_OUTPUT_SAMPLE_SIZE GENMASK(21, 19)
-#define JZ_AIC_CTRL_INPUT_SAMPLE_SIZE GENMASK(18, 16)
-#define JZ_AIC_CTRL_ENABLE_RX_DMA BIT(15)
-#define JZ_AIC_CTRL_ENABLE_TX_DMA BIT(14)
-#define JZ_AIC_CTRL_MONO_TO_STEREO BIT(11)
-#define JZ_AIC_CTRL_SWITCH_ENDIANNESS BIT(10)
-#define JZ_AIC_CTRL_SIGNED_TO_UNSIGNED BIT(9)
+#define JZ_AIC_CONF_OVERFLOW_PLAY_LAST BIT(6)
+#define JZ_AIC_CONF_INTERNAL_CODEC BIT(5)
+#define JZ_AIC_CONF_I2S BIT(4)
+#define JZ_AIC_CONF_RESET BIT(3)
+#define JZ_AIC_CONF_BIT_CLK_MASTER BIT(2)
+#define JZ_AIC_CONF_SYNC_CLK_MASTER BIT(1)
+#define JZ_AIC_CONF_ENABLE BIT(0)
+
+#define JZ_AIC_CTRL_OUTPUT_SAMPLE_SIZE GENMASK(21, 19)
+#define JZ_AIC_CTRL_INPUT_SAMPLE_SIZE GENMASK(18, 16)
+#define JZ_AIC_CTRL_ENABLE_RX_DMA BIT(15)
+#define JZ_AIC_CTRL_ENABLE_TX_DMA BIT(14)
+#define JZ_AIC_CTRL_MONO_TO_STEREO BIT(11)
+#define JZ_AIC_CTRL_SWITCH_ENDIANNESS BIT(10)
+#define JZ_AIC_CTRL_SIGNED_TO_UNSIGNED BIT(9)
#define JZ_AIC_CTRL_FLUSH BIT(8)
-#define JZ_AIC_CTRL_ENABLE_ROR_INT BIT(6)
-#define JZ_AIC_CTRL_ENABLE_TUR_INT BIT(5)
-#define JZ_AIC_CTRL_ENABLE_RFS_INT BIT(4)
-#define JZ_AIC_CTRL_ENABLE_TFS_INT BIT(3)
-#define JZ_AIC_CTRL_ENABLE_LOOPBACK BIT(2)
-#define JZ_AIC_CTRL_ENABLE_PLAYBACK BIT(1)
-#define JZ_AIC_CTRL_ENABLE_CAPTURE BIT(0)
-
-#define JZ4760_AIC_CTRL_TFLUSH BIT(8)
-#define JZ4760_AIC_CTRL_RFLUSH BIT(7)
-
-#define JZ_AIC_I2S_FMT_DISABLE_BIT_CLK BIT(12)
-#define JZ_AIC_I2S_FMT_DISABLE_BIT_ICLK BIT(13)
-#define JZ_AIC_I2S_FMT_ENABLE_SYS_CLK BIT(4)
-#define JZ_AIC_I2S_FMT_MSB BIT(0)
-
-#define JZ_AIC_I2S_STATUS_BUSY BIT(2)
+#define JZ_AIC_CTRL_ENABLE_ROR_INT BIT(6)
+#define JZ_AIC_CTRL_ENABLE_TUR_INT BIT(5)
+#define JZ_AIC_CTRL_ENABLE_RFS_INT BIT(4)
+#define JZ_AIC_CTRL_ENABLE_TFS_INT BIT(3)
+#define JZ_AIC_CTRL_ENABLE_LOOPBACK BIT(2)
+#define JZ_AIC_CTRL_ENABLE_PLAYBACK BIT(1)
+#define JZ_AIC_CTRL_ENABLE_CAPTURE BIT(0)
+
+#define JZ4760_AIC_CTRL_TFLUSH BIT(8)
+#define JZ4760_AIC_CTRL_RFLUSH BIT(7)
+
+#define JZ_AIC_I2S_FMT_DISABLE_BIT_CLK BIT(12)
+#define JZ_AIC_I2S_FMT_DISABLE_BIT_ICLK BIT(13)
+#define JZ_AIC_I2S_FMT_ENABLE_SYS_CLK BIT(4)
+#define JZ_AIC_I2S_FMT_MSB BIT(0)
+
+#define JZ_AIC_I2S_STATUS_BUSY BIT(2)
struct i2s_soc_info {
struct snd_soc_dai_driver *dai;