diff mbox series

[v5,11/21] dmaengine: imx-sdma: Add multi fifo support

Message ID 20220408112928.1326755-12-s.hauer@pengutronix.de
State Superseded
Headers show
Series ASoC: fsl_micfil: Driver updates | expand

Commit Message

Sascha Hauer April 8, 2022, 11:29 a.m. UTC
The i.MX SDMA engine can read from / write to multiple successive
hardware FIFO registers, referred to as "Multi FIFO support". This is
needed for the micfil driver and certain configurations of the SAI
driver. This patch adds support for this feature.

The number of FIFOs to read from / write to must be communicated from
the client driver to the SDMA engine. For this the struct
dma_slave_config::peripheral_config field is used.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-By: Vinod Koul <vkoul@kernel.org>
---

Notes:
    Changes since v2:
    - Use prefix dmaengine:
    - document struct sdma_peripheral_config
    - add forgotten commit message
    
    Changes since v1:
    - Drop unused variable sw_done_sel
    - Evaluate sdmac->direction directly instead of storing value in n_fifos

 drivers/dma/imx-sdma.c      | 57 +++++++++++++++++++++++++++++++++++++
 include/linux/dma/imx-dma.h | 20 +++++++++++++
 2 files changed, 77 insertions(+)
diff mbox series

Patch

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 0e70843567cef..95367a8a81a51 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -14,6 +14,7 @@ 
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
@@ -73,6 +74,7 @@ 
 #define SDMA_CHNENBL0_IMX35	0x200
 #define SDMA_CHNENBL0_IMX31	0x080
 #define SDMA_CHNPRI_0		0x100
+#define SDMA_DONE0_CONFIG	0x1000
 
 /*
  * Buffer descriptor status values.
@@ -180,6 +182,12 @@ 
 				 BIT(DMA_MEM_TO_DEV) | \
 				 BIT(DMA_DEV_TO_DEV))
 
+#define SDMA_WATERMARK_LEVEL_N_FIFOS	GENMASK(15, 12)
+#define SDMA_WATERMARK_LEVEL_SW_DONE	BIT(23)
+
+#define SDMA_DONE0_CONFIG_DONE_SEL	BIT(7)
+#define SDMA_DONE0_CONFIG_DONE_DIS	BIT(6)
+
 /**
  * struct sdma_script_start_addrs - SDMA script start pointers
  *
@@ -441,6 +449,9 @@  struct sdma_channel {
 	struct work_struct		terminate_worker;
 	struct list_head                terminated;
 	bool				is_ram_script;
+	unsigned int			n_fifos_src;
+	unsigned int			n_fifos_dst;
+	bool				sw_done;
 };
 
 #define IMX_DMA_SG_LOOP		BIT(0)
@@ -778,6 +789,14 @@  static void sdma_event_enable(struct sdma_channel *sdmac, unsigned int event)
 	val = readl_relaxed(sdma->regs + chnenbl);
 	__set_bit(channel, &val);
 	writel_relaxed(val, sdma->regs + chnenbl);
+
+	/* Set SDMA_DONEx_CONFIG is sw_done enabled */
+	if (sdmac->sw_done) {
+		val = readl_relaxed(sdma->regs + SDMA_DONE0_CONFIG);
+		val |= SDMA_DONE0_CONFIG_DONE_SEL;
+		val &= ~SDMA_DONE0_CONFIG_DONE_DIS;
+		writel_relaxed(val, sdma->regs + SDMA_DONE0_CONFIG);
+	}
 }
 
 static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event)
@@ -1038,6 +1057,10 @@  static int sdma_get_pc(struct sdma_channel *sdmac,
 	case IMX_DMATYPE_IPU_MEMORY:
 		emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr;
 		break;
+	case IMX_DMATYPE_MULTI_SAI:
+		per_2_emi = sdma->script_addrs->sai_2_mcu_addr;
+		emi_2_per = sdma->script_addrs->mcu_2_sai_addr;
+		break;
 	default:
 		dev_err(sdma->dev, "Unsupported transfer type %d\n",
 			peripheral_type);
@@ -1214,6 +1237,22 @@  static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
 	sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT;
 }
 
+static void sdma_set_watermarklevel_for_sais(struct sdma_channel *sdmac)
+{
+	unsigned int n_fifos;
+
+	if (sdmac->sw_done)
+		sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SW_DONE;
+
+	if (sdmac->direction == DMA_DEV_TO_MEM)
+		n_fifos = sdmac->n_fifos_src;
+	else
+		n_fifos = sdmac->n_fifos_dst;
+
+	sdmac->watermark_level |=
+			FIELD_PREP(SDMA_WATERMARK_LEVEL_N_FIFOS, n_fifos);
+}
+
 static int sdma_config_channel(struct dma_chan *chan)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
@@ -1250,6 +1289,10 @@  static int sdma_config_channel(struct dma_chan *chan)
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
 		} else {
+			if (sdmac->peripheral_type ==
+					IMX_DMATYPE_MULTI_SAI)
+				sdma_set_watermarklevel_for_sais(sdmac);
+
 			__set_bit(sdmac->event_id0, sdmac->event_mask);
 		}
 
@@ -1707,9 +1750,23 @@  static int sdma_config(struct dma_chan *chan,
 		       struct dma_slave_config *dmaengine_cfg)
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
+	struct sdma_engine *sdma = sdmac->sdma;
 
 	memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
 
+	if (dmaengine_cfg->peripheral_config) {
+		struct sdma_peripheral_config *sdmacfg = dmaengine_cfg->peripheral_config;
+		if (dmaengine_cfg->peripheral_size != sizeof(struct sdma_peripheral_config)) {
+			dev_err(sdma->dev, "Invalid peripheral size %zu, expected %zu\n",
+				dmaengine_cfg->peripheral_size,
+				sizeof(struct sdma_peripheral_config));
+			return -EINVAL;
+		}
+		sdmac->n_fifos_src = sdmacfg->n_fifos_src;
+		sdmac->n_fifos_dst = sdmacfg->n_fifos_dst;
+		sdmac->sw_done = sdmacfg->sw_done;
+	}
+
 	/* Set ENBLn earlier to make sure dma request triggered after that */
 	if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
 		return -EINVAL;
diff --git a/include/linux/dma/imx-dma.h b/include/linux/dma/imx-dma.h
index b06cba85a6d46..8887762360d40 100644
--- a/include/linux/dma/imx-dma.h
+++ b/include/linux/dma/imx-dma.h
@@ -39,6 +39,7 @@  enum sdma_peripheral_type {
 	IMX_DMATYPE_SSI_DUAL,	/* SSI Dual FIFO */
 	IMX_DMATYPE_ASRC_SP,	/* Shared ASRC */
 	IMX_DMATYPE_SAI,	/* SAI */
+	IMX_DMATYPE_MULTI_SAI,	/* MULTI FIFOs For Audio */
 };
 
 enum imx_dma_prio {
@@ -65,4 +66,23 @@  static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
 		!strcmp(chan->device->dev->driver->name, "imx-dma");
 }
 
+/**
+ * struct sdma_peripheral_config - SDMA config for audio
+ * @n_fifos_src: Number of FIFOs for recording
+ * @n_fifos_dst: Number of FIFOs for playback
+ * @sw_done: Use software done. Needed for PDM (micfil)
+ *
+ * Some i.MX Audio devices (SAI, micfil) have multiple successive FIFO
+ * registers. For multichannel recording/playback the SAI/micfil have
+ * one FIFO register per channel and the SDMA engine has to read/write
+ * the next channel from/to the next register and wrap around to the
+ * first register when all channels are handled. The number of active
+ * channels must be communicated to the SDMA engine using this struct.
+ */
+struct sdma_peripheral_config {
+	int n_fifos_src;
+	int n_fifos_dst;
+	bool sw_done;
+};
+
 #endif /* __LINUX_DMA_IMX_H */