mbox series

[v4,0/5] ASoC: codecs: add support for WCD939x Codec

Message ID 20231219-topic-sm8650-upstream-wcd939x-codec-v4-0-1c3bbff2d7ab@linaro.org
Headers show
Series ASoC: codecs: add support for WCD939x Codec | expand

Message

Neil Armstrong Dec. 19, 2023, 12:45 p.m. UTC
Add the main WCD9390/WCD9395 Audio Codec driver to support:
- 4 ADC inputs for up to 5 Analog Microphones
- 4 DMIC inputs for up to 8 Digital Microphones
- 4 Microphone BIAS
- Stereo Headphone output
- Mono EAR output
- MBHC engine for Headset Detection

This adds:
- bindings
- MBHC changes to support Type-C muc
- Soundwire Slave driver
- Code driver

The USB Mux subsystem support will be submitted separalety
since it's a functionally separate subsystem connected over
I2C with it's own reset signal.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v4:
- Soundwire driver
 - Removed volatile/read-only registers from defaults list
 - Added a wcd939x_readable_register() with read-only + read-write registers, so cache does it's job
 - Added wcd939x_volatile_register() with only volatile registers
 - Fixed a probable but by not using devm_ from probe() otherwise it would be freed in component unbind
 - Fixed lifetime of the soundwire device, by setting it un forced suspend until component it bound
 - Used the component bind/unbind to control the runtime pm, avoiding soundwire callbacks when not bound
 - Added a wcd939x_swr_get_regmap() callback, because dev_get_regmap() would not work anymore without using devm in probe
 - Removed useless pm_runtime_mark_last_busy in resume
- Codec driver
 - Fixed hph_mode setup, returning 0 is already set, checking against all possible values
 - Used CLS_H_NORMAL instead CLS_H_INVALID as it should be in the hph_mode_mux_text list
 - Used wcd939x_swr_get_regmap() to get TX SoundWire device device
 - Fixed a probable uninitialized usage of version variable in probe
- Link to v3: https://lore.kernel.org/r/20231207-topic-sm8650-upstream-wcd939x-codec-v3-0-6df9585ec7c8@linaro.org

Changes in v3:
- Fixed W=1 and smatch warnings reported by lkp & Dan Carpenter
- Fixed dependency on CONFIG_TYPEC and added guards to not build type-c related code when disabled
- Collected review on second bindings patch
- Link to v2: https://lore.kernel.org/r/20231201-topic-sm8650-upstream-wcd939x-codec-v2-0-94ed814b25aa@linaro.org

Changes in v2:
- Bindings:
  - Dropped all references to "Slave" or "Host" terminology when possible
  - Collected review for first patch
  - Added wcd9395 as fallback of wcd9390
  - Fixes typos errors
- MBHC:
  - Dropped all references to "Slave" or "Host" terminology when possible
  - Fixed EXPORT_SYMBOL into EXPORT_SYMBOL_GPL
  - Fixed typo in commit message
- Soundwire Devices driver
  - Dropped all references to "Slave" or "Host" terminology when possible
  - Dropped comments and unused code
  - Reworked wcd939x_swr_get_current_bank()
  - Added comments to wcd9390_interrupt_callback()
  - Reworked regmap's wcd939x_readonly/volatile_register checks
  - Added comments explaining while bind/unbind are empty
  - Added comment on SDW_SLAVE_ENTRY meaning
  - Added more register fields defines
  - Style fixes
- Codec driver
  - Dropped all references to "Slave" or "Host" terminology when possible
  - Added MICB_BIAS_ values enum and used them in the code
  - Moved zdet_param to the top
  - Added TLV data for ear_pa_gain and used it
  - Defined as much as possible every bit field used on/from register
  - Replaced 1/0 to true/false when writing to single bit fields
  - Replaced for loop on all bits with ffs(), simplified code
  - Simplified MICB fields handling code
  - Reworked and simplified wcd939x_get/set_compander and other kcontrol get/setters
  - Reworked and simplified MHGC impedance/zdet/qval code, dropped dead code
  - Added comments on wcd939x_wd_handle_irq() utility
  - Added comment on the interrupt handling architecture
- I've not moved common code yet, I'll probably do later since it would alter wcd939x code
- Link to v1: https://lore.kernel.org/r/20231123-topic-sm8650-upstream-wcd939x-codec-v1-0-21d4ad9276de@linaro.org

---
Neil Armstrong (5):
      ASoC: dt-bindings: qcom,wcd938x: move out common properties
      ASoC: dt-bindings: document WCD939x Audio Codec
      ASoC: codec: wcd-mbhc-v2: add support when connected behind an USB-C audio mux
      ASoC: codecs: Add WCD939x Soundwire devices driver
      ASoC: codecs: Add WCD939x Codec driver

 .../devicetree/bindings/sound/qcom,wcd938x.yaml    |   81 +-
 .../bindings/sound/qcom,wcd939x-sdw.yaml           |   69 +
 .../devicetree/bindings/sound/qcom,wcd939x.yaml    |   96 +
 .../bindings/sound/qcom,wcd93xx-common.yaml        |   95 +
 sound/soc/codecs/Kconfig                           |   19 +
 sound/soc/codecs/Makefile                          |    7 +
 sound/soc/codecs/wcd-clsh-v2.h                     |    1 +
 sound/soc/codecs/wcd-mbhc-v2.c                     |   95 +-
 sound/soc/codecs/wcd-mbhc-v2.h                     |    3 +
 sound/soc/codecs/wcd939x-sdw.c                     | 1551 ++++++++
 sound/soc/codecs/wcd939x.c                         | 3686 ++++++++++++++++++++
 sound/soc/codecs/wcd939x.h                         |  989 ++++++
 12 files changed, 6597 insertions(+), 95 deletions(-)
---
base-commit: 07b677953b9dca02928be323e2db853511305fa9
change-id: 20231123-topic-sm8650-upstream-wcd939x-codec-c46f621b55d4

Best regards,