Message ID | 1342420976-25068-1-git-send-email-sachin.kamat@linaro.org |
---|---|
State | Superseded |
Headers | show |
Hi Sachin, On 07/16/2012 08:42 AM, Sachin Kamat wrote: > Pixcir touchscreen device support is added to SMDK4X12 boards. > > Signed-off-by: Sachin Kamat<sachin.kamat@linaro.org> > --- > This patch is based on Kukjin Kim's latest for-next branch. > > Changes since v1: > Incorporated Kukjin's review comments > -reduced mdelay > -removed a unnecessary gpio > --- > arch/arm/mach-exynos/mach-smdk4x12.c | 31 ++++++++++++++++++++++++++++++- > 1 files changed, 30 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c > index 2623f3b..b3207ea 100644 > --- a/arch/arm/mach-exynos/mach-smdk4x12.c > +++ b/arch/arm/mach-exynos/mach-smdk4x12.c > @@ -9,9 +9,11 @@ > * published by the Free Software Foundation. > */ > > +#include<linux/delay.h> > #include<linux/gpio.h> > #include<linux/i2c.h> > #include<linux/input.h> > +#include<linux/input/pixcir_ts.h> > #include<linux/io.h> > #include<linux/lcd.h> > #include<linux/mfd/max8997.h> > @@ -207,8 +209,33 @@ static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = { > /* nothing here yet */ > }; > > +static void smdk4x12_ts_gpio_setup(void) > +{ > + int gpio_reset = EXYNOS4_GPM3(4); I don't seem to find this GPIO defined in Kgene's for-next tree. Is there already GPIO support for Exynos4x12 SoC's merged in someone's tree ? I thought it's not completed yet. > + > + gpio_request_one(gpio_reset, GPIOF_OUT_INIT_LOW, "TOUCH RESET"); > + mdelay(2); Any reason to use mdelay, rather than msleep/usleep_range ? > + gpio_direction_output(gpio_reset, 1); Probably better to make it: gpio_set_value(gpio_reset, 1); since the GPIO's direction is already set in gpio_request_one(). > + mdelay(30); msleep(30); -- Regards, Sylwester
Hi Sylwester, Thank you for the review. On 16/07/2012, Sylwester Nawrocki <sylvester.nawrocki@gmail.com> wrote: > Hi Sachin, > > On 07/16/2012 08:42 AM, Sachin Kamat wrote: >> Pixcir touchscreen device support is added to SMDK4X12 boards. >> >> Signed-off-by: Sachin Kamat<sachin.kamat@linaro.org> >> --- >> This patch is based on Kukjin Kim's latest for-next branch. >> >> Changes since v1: >> Incorporated Kukjin's review comments >> -reduced mdelay >> -removed a unnecessary gpio >> --- >> arch/arm/mach-exynos/mach-smdk4x12.c | 31 >> ++++++++++++++++++++++++++++++- >> 1 files changed, 30 insertions(+), 1 deletions(-) >> >> diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c >> b/arch/arm/mach-exynos/mach-smdk4x12.c >> index 2623f3b..b3207ea 100644 >> --- a/arch/arm/mach-exynos/mach-smdk4x12.c >> +++ b/arch/arm/mach-exynos/mach-smdk4x12.c >> @@ -9,9 +9,11 @@ >> * published by the Free Software Foundation. >> */ >> >> +#include<linux/delay.h> >> #include<linux/gpio.h> >> #include<linux/i2c.h> >> #include<linux/input.h> >> +#include<linux/input/pixcir_ts.h> >> #include<linux/io.h> >> #include<linux/lcd.h> >> #include<linux/mfd/max8997.h> >> @@ -207,8 +209,33 @@ static struct i2c_board_info smdk4x12_i2c_devs3[] >> __initdata = { >> /* nothing here yet */ >> }; >> >> +static void smdk4x12_ts_gpio_setup(void) >> +{ >> + int gpio_reset = EXYNOS4_GPM3(4); > > I don't seem to find this GPIO defined in Kgene's for-next tree. > Is there already GPIO support for Exynos4x12 SoC's merged in someone's > tree ? I thought it's not completed yet. Yes, you are right. GPIO support for 4X12 is not yet merged. I had that patch locally on my branch, so did not realise it. This patch should then go after the GPIO support gets merged. > >> + >> + gpio_request_one(gpio_reset, GPIOF_OUT_INIT_LOW, "TOUCH RESET"); >> + mdelay(2); > > Any reason to use mdelay, rather than msleep/usleep_range ? No. > >> + gpio_direction_output(gpio_reset, 1); > > Probably better to make it: > > gpio_set_value(gpio_reset, 1); Ok. > > since the GPIO's direction is already set in gpio_request_one(). > >> + mdelay(30); > > msleep(30); Ok. I will update and re-send the patch once GPIO support gets merged. > > -- > > Regards, > Sylwester >
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index 2623f3b..b3207ea 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -9,9 +9,11 @@ * published by the Free Software Foundation. */ +#include <linux/delay.h> #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/input.h> +#include <linux/input/pixcir_ts.h> #include <linux/io.h> #include <linux/lcd.h> #include <linux/mfd/max8997.h> @@ -207,8 +209,33 @@ static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = { /* nothing here yet */ }; +static void smdk4x12_ts_gpio_setup(void) +{ + int gpio_reset = EXYNOS4_GPM3(4); + + gpio_request_one(gpio_reset, GPIOF_OUT_INIT_LOW, "TOUCH RESET"); + mdelay(2); + gpio_direction_output(gpio_reset, 1); + mdelay(30); +} + +static int smdk4x12_ts_get_value(void) +{ + return 1; +} + +static struct pixcir_ts_platform_data smdk4x12_ts_data = { + .attb_read_val = smdk4x12_ts_get_value, + .x_max = 480, + .y_max = 800, +}; + static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = { - /* nothing here yet */ + { + I2C_BOARD_INFO("pixcir_ts", 0x5C), + .irq = IRQ_EINT(22), + .platform_data = &smdk4x12_ts_data, + } }; static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = { @@ -336,6 +363,8 @@ static void __init smdk4x12_machine_init(void) s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata); + smdk4x12_ts_gpio_setup(); + platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices)); }
Pixcir touchscreen device support is added to SMDK4X12 boards. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> --- This patch is based on Kukjin Kim's latest for-next branch. Changes since v1: Incorporated Kukjin's review comments -reduced mdelay -removed a unnecessary gpio --- arch/arm/mach-exynos/mach-smdk4x12.c | 31 ++++++++++++++++++++++++++++++- 1 files changed, 30 insertions(+), 1 deletions(-)