| Message ID | 20170517083745.24479-13-guodong.xu@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [01/12] dt-bindings: arm: hisilicon: add bindings for HiKey960 board | expand |
On Wed, May 17, 2017 at 04:37:45PM +0800, Guodong Xu wrote: > HiKey960 has four user LEDs, and two special purpose LEDs: WiFi and BT > respectively. > > All of them are implemented as GPIO. > > Signed-off-by: Guodong Xu <guodong.xu@linaro.org> > --- > arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 48 +++++++++++++++++++++++ > 1 file changed, 48 insertions(+) > > diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts > index 6de86c0..4839885 100644 > --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts > +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts > @@ -48,6 +48,54 @@ > linux,code = <KEY_POWER>; > }; > }; > + > + leds { This too should move out of the soc node. > + compatible = "gpio-leds"; > + status = "disabled"; > + user_led1 { > + label = "user_led1"; > + /* gpio_150_user_led1 */ > + gpios = <&gpio18 6 0>; > + linux,default-trigger = "heartbeat"; > + }; > + > + user_led2 { > + label = "user_led2"; > + /* gpio_151_user_led2 */ > + gpios = <&gpio18 7 0>; > + linux,default-trigger = "mmc0"; > + }; > + > + user_led3 { > + label = "user_led3"; > + /* gpio_189_user_led3 */ > + gpios = <&gpio23 5 0>; > + default-state = "off"; > + }; > + > + user_led4 { > + label = "user_led4"; > + /* gpio_190_user_led4 */ > + gpios = <&gpio23 6 0>; > + linux,default-trigger = "cpu0"; > + }; > + > + wlan_active_led { > + label = "wifi_active"; > + /* gpio_205_wifi_active */ > + gpios = <&gpio25 5 0>; > + linux,default-trigger = "phy0tx"; > + default-state = "off"; > + }; > + > + bt_active_led { > + label = "bt_active"; > + gpios = <&gpio25 7 0>; > + /* gpio_207_user_led1 */ > + linux,default-trigger = "hci0rx"; > + default-state = "off"; > + }; > + }; > }; > }; > > -- > 2.10.2 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 6de86c0..4839885 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -48,6 +48,54 @@ linux,code = <KEY_POWER>; }; }; + + leds { + compatible = "gpio-leds"; + status = "disabled"; + user_led1 { + label = "user_led1"; + /* gpio_150_user_led1 */ + gpios = <&gpio18 6 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "user_led2"; + /* gpio_151_user_led2 */ + gpios = <&gpio18 7 0>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "user_led3"; + /* gpio_189_user_led3 */ + gpios = <&gpio23 5 0>; + default-state = "off"; + }; + + user_led4 { + label = "user_led4"; + /* gpio_190_user_led4 */ + gpios = <&gpio23 6 0>; + linux,default-trigger = "cpu0"; + }; + + wlan_active_led { + label = "wifi_active"; + /* gpio_205_wifi_active */ + gpios = <&gpio25 5 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "bt_active"; + gpios = <&gpio25 7 0>; + /* gpio_207_user_led1 */ + linux,default-trigger = "hci0rx"; + default-state = "off"; + }; + }; }; };
HiKey960 has four user LEDs, and two special purpose LEDs: WiFi and BT respectively. All of them are implemented as GPIO. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 48 +++++++++++++++++++++++ 1 file changed, 48 insertions(+) -- 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html