diff mbox

[10/10,V6] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0

Message ID 1341381780-2725-11-git-send-email-rajeshwari.s@samsung.com
State Accepted
Commit 41222c2ada4cd8bca3c7ffbb03a3f1d40b802f44
Headers show

Commit Message

Rajeshwari Shinde July 4, 2012, 6:03 a.m. UTC 
This patch sets UART3 and MMC channle 0 for Exynos5250 Rev 1.0

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
Changes in V2:
       - None.
Changes in V3:
        - None
Changes in V4:
        - None
Changes in V5:
        - None
Chnages in V6:
	- None
 board/samsung/smdk5250/smdk5250.c |    6 +++---
 include/configs/smdk5250.h        |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 3b078da..b593325 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -130,13 +130,13 @@  int board_mmc_init(bd_t *bis)
 {
 	int err;
 
-	err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
+	err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
 	if (err) {
-		debug("SDMMC2 not configured\n");
+		debug("SDMMC0 not configured\n");
 		return err;
 	}
 
-	err = s5p_mmc_init(2, 4);
+	err = s5p_mmc_init(0, 8);
 	return err;
 }
 #endif
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 0e5a6e4..86dd905 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -69,7 +69,7 @@ 
 
 /* select serial console configuration */
 #define CONFIG_SERIAL_MULTI
-#define CONFIG_SERIAL1			/* use SERIAL 1 */
+#define CONFIG_SERIAL3			/* use SERIAL 3 */
 #define CONFIG_BAUDRATE			115200
 #define EXYNOS5_DEFAULT_UART_OFFSET	0x010000