[28/29] clocksource/drivers/gemini: Rename Gemini timer to Faraday

Message ID	1492374441-23336-28-git-send-email-daniel.lezcano@linaro.org
State	New
Headers	show Delivered-To: patch@linaro.org Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; From: Daniel Lezcano <daniel.lezcano@linaro.org> To: tglx@linutronix.de Cc: linux-kernel@vger.kernel.org, Linus Walleij <linus.walleij@linaro.org> Subject: [PATCH 28/29] clocksource/drivers/gemini: Rename Gemini timer to Faraday Date: Sun, 16 Apr 2017 22:27:18 +0200 Message-Id: <1492374441-23336-28-git-send-email-daniel.lezcano@linaro.org> In-Reply-To: <1492374441-23336-1-git-send-email-daniel.lezcano@linaro.org> References: <20170416202542.GV2078@mai> <1492374441-23336-1-git-send-email-daniel.lezcano@linaro.org> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk
Series	[01/29] arm64: Allow checking of a CPU-local erratum \| expand [01/29] arm64: Allow checking of a CPU-local erratum [02/29] arm64: Add CNTVCT_EL0 trap handler [03/29] arm64: Define Cortex-A73 MIDR [04/29] arm64: cpu_errata: Allow an erratum to be match for all revisions of a core [05/29] arm64: cpu_errata: Add capability to advertise Cortex-A73 erratum 858921 [06/29] arm64: arch_timer: Add infrastructure for multiple erratum detection methods [07/29] arm64: arch_timer: Add erratum handler for CPU-specific capability [08/29] arm64: arch_timer: Move arch_timer_reg_read/write around [09/29] arm64: arch_timer: Get rid of erratum_workaround_set_sne [10/29] arm64: arch_timer: Rework the set_next_event workarounds [11/29] arm64: arch_timer: Make workaround methods optional [12/29] arm64: arch_timer: Allows a CPU-specific erratum to only affect a subset of CPUs [13/29] arm64: arch_timer: Move clocksource_counter and co around [14/29] arm64: arch_timer: Save cntkctl_el1 as a per-cpu variable [15/29] arm64: arch_timer: Enable CNTVCT_EL0 trap if workaround is enabled [16/29] arm64: arch_timer: Workaround for Cortex-A73 erratum 858921 [17/29] arm64: arch_timer: Allow erratum matching with ACPI OEM information [18/29] arm64: arch_timer: Add HISILICON_ERRATUM_161010101 ACPI matching data [19/29] clocksource/drivers/orion: Read clock rate once [20/29] clocksource/drivers/orion: Add delay_timer implementation [21/29] clocksource: Add missing line break to error messages [22/29] dt-bindings: Clarify compatible property for rockchip timers [23/29] ARM: dts: rockchip: Update compatible property for rk322x timer [24/29] clocksource/drivers/rockchip_timer: Implement clocksource timer [25/29] ARM: dts: rockchip: Add timer entries to rk3188 SoC [27/29] clocksource: Augment bindings for Faraday timer [28/29] clocksource/drivers/gemini: Rename Gemini timer to Faraday [29/29] clocksource/drivers/fttmr010: Refactor to handle clock

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 483f3b1..7ca2c24 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -67,15 +67,16 @@ config DW_APB_TIMER_OF select DW_APB_TIMER select CLKSRC_OF -config GEMINI_TIMER - bool "Cortina Gemini timer driver" if COMPILE_TEST +config FTTMR010_TIMER + bool "Faraday Technology timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS depends on HAS_IOMEM select CLKSRC_MMIO select CLKSRC_OF select MFD_SYSCON help - Enables support for the Gemini timer + Enables support for the Faraday Technology timer block + FTTMR010. config ROCKCHIP_TIMER bool "Rockchip timer driver" if COMPILE_TEST diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index d227d13..2b5b56a 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -17,7 +17,7 @@ obj-$(CONFIG_CLKSRC_MMIO) += mmio.o obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o -obj-$(CONFIG_GEMINI_TIMER) += timer-gemini.o +obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c new file mode 100644 index 0000000..e37ec3d --- /dev/null +++ b/drivers/clocksource/timer-fttmr010.c @@ -0,0 +1,276 @@ +/* + * Faraday Technology FTTMR010 timer driver + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * Based on a rewrite of arch/arm/mach-gemini/timer.c: + * Copyright (C) 2001-2006 Storlink, Corp. + * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + */ +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/sched_clock.h> + +/* + * Relevant registers in the global syscon + */ +#define GLOBAL_STATUS 0x04 +#define CPU_AHB_RATIO_MASK (0x3 << 18) +#define CPU_AHB_1_1 (0x0 << 18) +#define CPU_AHB_3_2 (0x1 << 18) +#define CPU_AHB_24_13 (0x2 << 18) +#define CPU_AHB_2_1 (0x3 << 18) +#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130) + +/* + * Register definitions for the timers + */ +#define TIMER1_COUNT (0x00) +#define TIMER1_LOAD (0x04) +#define TIMER1_MATCH1 (0x08) +#define TIMER1_MATCH2 (0x0c) +#define TIMER2_COUNT (0x10) +#define TIMER2_LOAD (0x14) +#define TIMER2_MATCH1 (0x18) +#define TIMER2_MATCH2 (0x1c) +#define TIMER3_COUNT (0x20) +#define TIMER3_LOAD (0x24) +#define TIMER3_MATCH1 (0x28) +#define TIMER3_MATCH2 (0x2c) +#define TIMER_CR (0x30) +#define TIMER_INTR_STATE (0x34) +#define TIMER_INTR_MASK (0x38) + +#define TIMER_1_CR_ENABLE (1 << 0) +#define TIMER_1_CR_CLOCK (1 << 1) +#define TIMER_1_CR_INT (1 << 2) +#define TIMER_2_CR_ENABLE (1 << 3) +#define TIMER_2_CR_CLOCK (1 << 4) +#define TIMER_2_CR_INT (1 << 5) +#define TIMER_3_CR_ENABLE (1 << 6) +#define TIMER_3_CR_CLOCK (1 << 7) +#define TIMER_3_CR_INT (1 << 8) +#define TIMER_1_CR_UPDOWN (1 << 9) +#define TIMER_2_CR_UPDOWN (1 << 10) +#define TIMER_3_CR_UPDOWN (1 << 11) +#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \ + TIMER_3_CR_ENABLE | \ + TIMER_3_CR_UPDOWN) + +#define TIMER_1_INT_MATCH1 (1 << 0) +#define TIMER_1_INT_MATCH2 (1 << 1) +#define TIMER_1_INT_OVERFLOW (1 << 2) +#define TIMER_2_INT_MATCH1 (1 << 3) +#define TIMER_2_INT_MATCH2 (1 << 4) +#define TIMER_2_INT_OVERFLOW (1 << 5) +#define TIMER_3_INT_MATCH1 (1 << 6) +#define TIMER_3_INT_MATCH2 (1 << 7) +#define TIMER_3_INT_OVERFLOW (1 << 8) +#define TIMER_INT_ALL_MASK 0x1ff + +static unsigned int tick_rate; +static void __iomem *base; + +static u64 notrace fttmr010_read_sched_clock(void) +{ + return readl(base + TIMER3_COUNT); +} + +static int fttmr010_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + u32 cr; + + /* Setup the match register */ + cr = readl(base + TIMER1_COUNT); + writel(cr + cycles, base + TIMER1_MATCH1); + if (readl(base + TIMER1_COUNT) - cr > cycles) + return -ETIME; + + return 0; +} + +static int fttmr010_timer_shutdown(struct clock_event_device *evt) +{ + u32 cr; + + /* + * Disable also for oneshot: the set_next() call will arm the timer + * instead. + */ + /* Stop timer and interrupt. */ + cr = readl(base + TIMER_CR); + cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT); + writel(cr, base + TIMER_CR); + + /* Setup counter start from 0 */ + writel(0, base + TIMER1_COUNT); + writel(0, base + TIMER1_LOAD); + + /* enable interrupt */ + cr = readl(base + TIMER_INTR_MASK); + cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2); + cr |= TIMER_1_INT_MATCH1; + writel(cr, base + TIMER_INTR_MASK); + + /* start the timer */ + cr = readl(base + TIMER_CR); + cr |= TIMER_1_CR_ENABLE; + writel(cr, base + TIMER_CR); + + return 0; +} + +static int fttmr010_timer_set_periodic(struct clock_event_device *evt) +{ + u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ); + u32 cr; + + /* Stop timer and interrupt */ + cr = readl(base + TIMER_CR); + cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT); + writel(cr, base + TIMER_CR); + + /* Setup timer to fire at 1/HT intervals. */ + cr = 0xffffffff - (period - 1); + writel(cr, base + TIMER1_COUNT); + writel(cr, base + TIMER1_LOAD); + + /* enable interrupt on overflow */ + cr = readl(base + TIMER_INTR_MASK); + cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2); + cr |= TIMER_1_INT_OVERFLOW; + writel(cr, base + TIMER_INTR_MASK); + + /* Start the timer */ + cr = readl(base + TIMER_CR); + cr |= TIMER_1_CR_ENABLE; + cr |= TIMER_1_CR_INT; + writel(cr, base + TIMER_CR); + + return 0; +} + +/* Use TIMER1 as clock event */ +static struct clock_event_device fttmr010_clockevent = { + .name = "TIMER1", + /* Reasonably fast and accurate clock event */ + .rating = 300, + .shift = 32, + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = fttmr010_timer_set_next_event, + .set_state_shutdown = fttmr010_timer_shutdown, + .set_state_periodic = fttmr010_timer_set_periodic, + .set_state_oneshot = fttmr010_timer_shutdown, + .tick_resume = fttmr010_timer_shutdown, +}; + +/* + * IRQ handler for the timer + */ +static irqreturn_t fttmr010_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &fttmr010_clockevent; + + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction fttmr010_timer_irq = { + .name = "Faraday FTTMR010 Timer Tick", + .flags = IRQF_TIMER, + .handler = fttmr010_timer_interrupt, +}; + +static int __init gemini_timer_of_init(struct device_node *np) +{ + static struct regmap *map; + int irq; + int ret; + u32 val; + + map = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(map)) { + pr_err("Can't get regmap for syscon handle"); + return -ENODEV; + } + ret = regmap_read(map, GLOBAL_STATUS, &val); + if (ret) { + pr_err("Can't read syscon status register"); + return -ENXIO; + } + + base = of_iomap(np, 0); + if (!base) { + pr_err("Can't remap registers"); + return -ENXIO; + } + /* IRQ for timer 1 */ + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) { + pr_err("Can't parse IRQ"); + return -EINVAL; + } + + tick_rate = REG_TO_AHB_SPEED(val) * 1000000; + printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000); + + tick_rate /= 6; /* APB bus run AHB*(1/6) */ + + switch (val & CPU_AHB_RATIO_MASK) { + case CPU_AHB_1_1: + printk(KERN_CONT "(1/1)\n"); + break; + case CPU_AHB_3_2: + printk(KERN_CONT "(3/2)\n"); + break; + case CPU_AHB_24_13: + printk(KERN_CONT "(24/13)\n"); + break; + case CPU_AHB_2_1: + printk(KERN_CONT "(2/1)\n"); + break; + } + + /* + * Reset the interrupt mask and status + */ + writel(TIMER_INT_ALL_MASK, base + TIMER_INTR_MASK); + writel(0, base + TIMER_INTR_STATE); + writel(TIMER_DEFAULT_FLAGS, base + TIMER_CR); + + /* + * Setup free-running clocksource timer (interrupts + * disabled.) + */ + writel(0, base + TIMER3_COUNT); + writel(0, base + TIMER3_LOAD); + writel(0, base + TIMER3_MATCH1); + writel(0, base + TIMER3_MATCH2); + clocksource_mmio_init(base + TIMER3_COUNT, + "fttmr010_clocksource", tick_rate, + 300, 32, clocksource_mmio_readl_up); + sched_clock_register(fttmr010_read_sched_clock, 32, tick_rate); + + /* + * Setup clockevent timer (interrupt-driven.) + */ + writel(0, base + TIMER1_COUNT); + writel(0, base + TIMER1_LOAD); + writel(0, base + TIMER1_MATCH1); + writel(0, base + TIMER1_MATCH2); + setup_irq(irq, &fttmr010_timer_irq); + fttmr010_clockevent.cpumask = cpumask_of(0); + clockevents_config_and_register(&fttmr010_clockevent, tick_rate, + 1, 0xffffffff); + + return 0; +} +CLOCKSOURCE_OF_DECLARE(gemini, "cortina,gemini-timer", gemini_timer_of_init); diff --git a/drivers/clocksource/timer-gemini.c b/drivers/clocksource/timer-gemini.c deleted file mode 100644 index dda27b7..0000000 --- a/drivers/clocksource/timer-gemini.c +++ /dev/null @@ -1,277 +0,0 @@ -/* - * Gemini timer driver - * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> - * - * Based on a rewrite of arch/arm/mach-gemini/timer.c: - * Copyright (C) 2001-2006 Storlink, Corp. - * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - */ -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/mfd/syscon.h> -#include <linux/regmap.h> -#include <linux/clockchips.h> -#include <linux/clocksource.h> -#include <linux/sched_clock.h> - -/* - * Relevant registers in the global syscon - */ -#define GLOBAL_STATUS 0x04 -#define CPU_AHB_RATIO_MASK (0x3 << 18) -#define CPU_AHB_1_1 (0x0 << 18) -#define CPU_AHB_3_2 (0x1 << 18) -#define CPU_AHB_24_13 (0x2 << 18) -#define CPU_AHB_2_1 (0x3 << 18) -#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130) - -/* - * Register definitions for the timers - */ -#define TIMER1_COUNT (0x00) -#define TIMER1_LOAD (0x04) -#define TIMER1_MATCH1 (0x08) -#define TIMER1_MATCH2 (0x0c) -#define TIMER2_COUNT (0x10) -#define TIMER2_LOAD (0x14) -#define TIMER2_MATCH1 (0x18) -#define TIMER2_MATCH2 (0x1c) -#define TIMER3_COUNT (0x20) -#define TIMER3_LOAD (0x24) -#define TIMER3_MATCH1 (0x28) -#define TIMER3_MATCH2 (0x2c) -#define TIMER_CR (0x30) -#define TIMER_INTR_STATE (0x34) -#define TIMER_INTR_MASK (0x38) - -#define TIMER_1_CR_ENABLE (1 << 0) -#define TIMER_1_CR_CLOCK (1 << 1) -#define TIMER_1_CR_INT (1 << 2) -#define TIMER_2_CR_ENABLE (1 << 3) -#define TIMER_2_CR_CLOCK (1 << 4) -#define TIMER_2_CR_INT (1 << 5) -#define TIMER_3_CR_ENABLE (1 << 6) -#define TIMER_3_CR_CLOCK (1 << 7) -#define TIMER_3_CR_INT (1 << 8) -#define TIMER_1_CR_UPDOWN (1 << 9) -#define TIMER_2_CR_UPDOWN (1 << 10) -#define TIMER_3_CR_UPDOWN (1 << 11) -#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \ - TIMER_3_CR_ENABLE | \ - TIMER_3_CR_UPDOWN) - -#define TIMER_1_INT_MATCH1 (1 << 0) -#define TIMER_1_INT_MATCH2 (1 << 1) -#define TIMER_1_INT_OVERFLOW (1 << 2) -#define TIMER_2_INT_MATCH1 (1 << 3) -#define TIMER_2_INT_MATCH2 (1 << 4) -#define TIMER_2_INT_OVERFLOW (1 << 5) -#define TIMER_3_INT_MATCH1 (1 << 6) -#define TIMER_3_INT_MATCH2 (1 << 7) -#define TIMER_3_INT_OVERFLOW (1 << 8) -#define TIMER_INT_ALL_MASK 0x1ff - -static unsigned int tick_rate; -static void __iomem *base; - -static u64 notrace gemini_read_sched_clock(void) -{ - return readl(base + TIMER3_COUNT); -} - -static int gemini_timer_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - u32 cr; - - /* Setup the match register */ - cr = readl(base + TIMER1_COUNT); - writel(cr + cycles, base + TIMER1_MATCH1); - if (readl(base + TIMER1_COUNT) - cr > cycles) - return -ETIME; - - return 0; -} - -static int gemini_timer_shutdown(struct clock_event_device *evt) -{ - u32 cr; - - /* - * Disable also for oneshot: the set_next() call will arm the timer - * instead. - */ - /* Stop timer and interrupt. */ - cr = readl(base + TIMER_CR); - cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT); - writel(cr, base + TIMER_CR); - - /* Setup counter start from 0 */ - writel(0, base + TIMER1_COUNT); - writel(0, base + TIMER1_LOAD); - - /* enable interrupt */ - cr = readl(base + TIMER_INTR_MASK); - cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2); - cr |= TIMER_1_INT_MATCH1; - writel(cr, base + TIMER_INTR_MASK); - - /* start the timer */ - cr = readl(base + TIMER_CR); - cr |= TIMER_1_CR_ENABLE; - writel(cr, base + TIMER_CR); - - return 0; -} - -static int gemini_timer_set_periodic(struct clock_event_device *evt) -{ - u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ); - u32 cr; - - /* Stop timer and interrupt */ - cr = readl(base + TIMER_CR); - cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT); - writel(cr, base + TIMER_CR); - - /* Setup timer to fire at 1/HT intervals. */ - cr = 0xffffffff - (period - 1); - writel(cr, base + TIMER1_COUNT); - writel(cr, base + TIMER1_LOAD); - - /* enable interrupt on overflow */ - cr = readl(base + TIMER_INTR_MASK); - cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2); - cr |= TIMER_1_INT_OVERFLOW; - writel(cr, base + TIMER_INTR_MASK); - - /* Start the timer */ - cr = readl(base + TIMER_CR); - cr |= TIMER_1_CR_ENABLE; - cr |= TIMER_1_CR_INT; - writel(cr, base + TIMER_CR); - - return 0; -} - -/* Use TIMER1 as clock event */ -static struct clock_event_device gemini_clockevent = { - .name = "TIMER1", - /* Reasonably fast and accurate clock event */ - .rating = 300, - .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = gemini_timer_set_next_event, - .set_state_shutdown = gemini_timer_shutdown, - .set_state_periodic = gemini_timer_set_periodic, - .set_state_oneshot = gemini_timer_shutdown, - .tick_resume = gemini_timer_shutdown, -}; - -/* - * IRQ handler for the timer - */ -static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &gemini_clockevent; - - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static struct irqaction gemini_timer_irq = { - .name = "Gemini Timer Tick", - .flags = IRQF_TIMER, - .handler = gemini_timer_interrupt, -}; - -static int __init gemini_timer_of_init(struct device_node *np) -{ - static struct regmap *map; - int irq; - int ret; - u32 val; - - map = syscon_regmap_lookup_by_phandle(np, "syscon"); - if (IS_ERR(map)) { - pr_err("Can't get regmap for syscon handle"); - return -ENODEV; - } - ret = regmap_read(map, GLOBAL_STATUS, &val); - if (ret) { - pr_err("Can't read syscon status register"); - return -ENXIO; - } - - base = of_iomap(np, 0); - if (!base) { - pr_err("Can't remap registers"); - return -ENXIO; - } - /* IRQ for timer 1 */ - irq = irq_of_parse_and_map(np, 0); - if (irq <= 0) { - pr_err("Can't parse IRQ"); - return -EINVAL; - } - - tick_rate = REG_TO_AHB_SPEED(val) * 1000000; - printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000); - - tick_rate /= 6; /* APB bus run AHB*(1/6) */ - - switch (val & CPU_AHB_RATIO_MASK) { - case CPU_AHB_1_1: - printk(KERN_CONT "(1/1)\n"); - break; - case CPU_AHB_3_2: - printk(KERN_CONT "(3/2)\n"); - break; - case CPU_AHB_24_13: - printk(KERN_CONT "(24/13)\n"); - break; - case CPU_AHB_2_1: - printk(KERN_CONT "(2/1)\n"); - break; - } - - /* - * Reset the interrupt mask and status - */ - writel(TIMER_INT_ALL_MASK, base + TIMER_INTR_MASK); - writel(0, base + TIMER_INTR_STATE); - writel(TIMER_DEFAULT_FLAGS, base + TIMER_CR); - - /* - * Setup free-running clocksource timer (interrupts - * disabled.) - */ - writel(0, base + TIMER3_COUNT); - writel(0, base + TIMER3_LOAD); - writel(0, base + TIMER3_MATCH1); - writel(0, base + TIMER3_MATCH2); - clocksource_mmio_init(base + TIMER3_COUNT, - "gemini_clocksource", tick_rate, - 300, 32, clocksource_mmio_readl_up); - sched_clock_register(gemini_read_sched_clock, 32, tick_rate); - - /* - * Setup clockevent timer (interrupt-driven.) - */ - writel(0, base + TIMER1_COUNT); - writel(0, base + TIMER1_LOAD); - writel(0, base + TIMER1_MATCH1); - writel(0, base + TIMER1_MATCH2); - setup_irq(irq, &gemini_timer_irq); - gemini_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&gemini_clockevent, tick_rate, - 1, 0xffffffff); - - return 0; -} -CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "cortina,gemini-timer", - gemini_timer_of_init);

[28/29] clocksource/drivers/gemini: Rename Gemini timer to Faraday

Commit Message

Patch