@@ -174,6 +174,14 @@ config SYS_CACHELINE_SIZE
default 64 if SYS_CACHE_SHIFT_6
default 32 if SYS_CACHE_SHIFT_5
+config ARM_SMCCC
+ bool "Support for ARM SMC Calling Convention (SMCCC)"
+ depends on CPU_V7 || ARM64
+ help
+ Say Y here if you want to enable ARM SMC Calling Convention.
+ This should be enabled if U-Boot needs to communicate with system
+ firmware (for example, PSCI) according to SMCCC.
+
config SEMIHOSTING
bool "support boot from semihosting"
help
@@ -18,6 +18,7 @@ obj-y += lowlevel_init.o
endif
endif
+obj-$(CONFIG_ARM_SMCCC) += smccc-call.o
obj-$(CONFIG_ARMV7_NONSEC) += nonsec_virt.o virt-v7.o virt-dt.o
obj-$(CONFIG_ARMV7_PSCI) += psci.o psci-common.o
new file mode 100644
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#include <linux/linkage.h>
+
+#include <asm/opcodes-sec.h>
+#include <asm/opcodes-virt.h>
+
+#define UNWIND(x...)
+ /*
+ * Wrap c macros in asm macros to delay expansion until after the
+ * SMCCC asm macro is expanded.
+ */
+ .macro SMCCC_SMC
+ __SMC(0)
+ .endm
+
+ .macro SMCCC_HVC
+ __HVC(0)
+ .endm
+
+ .macro SMCCC instr
+UNWIND( .fnstart)
+ mov r12, sp
+ push {r4-r7}
+UNWIND( .save {r4-r7})
+ ldm r12, {r4-r7}
+ \instr
+ pop {r4-r7}
+ ldr r12, [sp, #(4 * 4)]
+ stm r12, {r0-r3}
+ bx lr
+UNWIND( .fnend)
+ .endm
+
+/*
+ * void smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
+ * unsigned long a3, unsigned long a4, unsigned long a5,
+ * unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ * struct arm_smccc_quirk *quirk)
+ */
+ENTRY(__arm_smccc_smc)
+ SMCCC SMCCC_SMC
+ENDPROC(__arm_smccc_smc)
+
+/*
+ * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
+ * unsigned long a3, unsigned long a4, unsigned long a5,
+ * unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ * struct arm_smccc_quirk *quirk)
+ */
+ENTRY(__arm_smccc_hvc)
+ SMCCC SMCCC_HVC
+ENDPROC(__arm_smccc_hvc)
@@ -16,6 +16,8 @@ obj-y += tlb.o
obj-y += transition.o
obj-y += fwcall.o
obj-y += cpu-dt.o
+obj-$(CONFIG_ARM_SMCCC) += smccc-call.o
+
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_ARMV8_SPIN_TABLE) += spin_table.o spin_table_v8.o
endif
new file mode 100644
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#include <linux/linkage.h>
+#include <linux/arm-smccc.h>
+#include <generated/asm-offsets.h>
+
+ .macro SMCCC instr
+ .cfi_startproc
+ \instr #0
+ ldr x4, [sp]
+ stp x0, x1, [x4, #ARM_SMCCC_RES_X0_OFFS]
+ stp x2, x3, [x4, #ARM_SMCCC_RES_X2_OFFS]
+ ldr x4, [sp, #8]
+ cbz x4, 1f /* no quirk structure */
+ ldr x9, [x4, #ARM_SMCCC_QUIRK_ID_OFFS]
+ cmp x9, #ARM_SMCCC_QUIRK_QCOM_A6
+ b.ne 1f
+ str x6, [x4, ARM_SMCCC_QUIRK_STATE_OFFS]
+1: ret
+ .cfi_endproc
+ .endm
+
+/*
+ * void arm_smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
+ * unsigned long a3, unsigned long a4, unsigned long a5,
+ * unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ * struct arm_smccc_quirk *quirk)
+ */
+ENTRY(__arm_smccc_smc)
+ SMCCC smc
+ENDPROC(__arm_smccc_smc)
+
+/*
+ * void arm_smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
+ * unsigned long a3, unsigned long a4, unsigned long a5,
+ * unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ * struct arm_smccc_quirk *quirk)
+ */
+ENTRY(__arm_smccc_hvc)
+ SMCCC hvc
+ENDPROC(__arm_smccc_hvc)
new file mode 100644
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2012 ARM Limited
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARM_OPCODES_SEC_H
+#define __ASM_ARM_OPCODES_SEC_H
+
+#include <asm/opcodes.h>
+
+#define __SMC(imm4) __inst_arm_thumb32( \
+ 0xE1600070 | (((imm4) & 0xF) << 0), \
+ 0xF7F08000 | (((imm4) & 0xF) << 16) \
+)
+
+#endif /* __ASM_ARM_OPCODES_SEC_H */
new file mode 100644
@@ -0,0 +1,27 @@
+/*
+ * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions
+ * Copyright (C) 2012 Linaro Limited
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#ifndef __ASM_ARM_OPCODES_VIRT_H
+#define __ASM_ARM_OPCODES_VIRT_H
+
+#include <asm/opcodes.h>
+
+#define __HVC(imm16) __inst_arm_thumb32( \
+ 0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F), \
+ 0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF) \
+)
+
+#define __ERET __inst_arm_thumb32( \
+ 0xE160006E, \
+ 0xF3DE8F00 \
+)
+
+#define __MSR_ELR_HYP(regnum) __inst_arm_thumb32( \
+ 0xE12EF300 | regnum, \
+ 0xF3808E30 | (regnum << 16) \
+)
+
+#endif /* ! __ASM_ARM_OPCODES_VIRT_H */
new file mode 100644
@@ -0,0 +1,229 @@
+/*
+ * arch/arm/include/asm/opcodes.h
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARM_OPCODES_H
+#define __ASM_ARM_OPCODES_H
+
+#ifndef __ASSEMBLY__
+#include <linux/linkage.h>
+extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
+#endif
+
+#define ARM_OPCODE_CONDTEST_FAIL 0
+#define ARM_OPCODE_CONDTEST_PASS 1
+#define ARM_OPCODE_CONDTEST_UNCOND 2
+
+
+/*
+ * Assembler opcode byteswap helpers.
+ * These are only intended for use by this header: don't use them directly,
+ * because they will be suboptimal in most cases.
+ */
+#define ___asm_opcode_swab32(x) ( \
+ (((x) << 24) & 0xFF000000) \
+ | (((x) << 8) & 0x00FF0000) \
+ | (((x) >> 8) & 0x0000FF00) \
+ | (((x) >> 24) & 0x000000FF) \
+)
+#define ___asm_opcode_swab16(x) ( \
+ (((x) << 8) & 0xFF00) \
+ | (((x) >> 8) & 0x00FF) \
+)
+#define ___asm_opcode_swahb32(x) ( \
+ (((x) << 8) & 0xFF00FF00) \
+ | (((x) >> 8) & 0x00FF00FF) \
+)
+#define ___asm_opcode_swahw32(x) ( \
+ (((x) << 16) & 0xFFFF0000) \
+ | (((x) >> 16) & 0x0000FFFF) \
+)
+#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
+#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
+
+
+/*
+ * Opcode byteswap helpers
+ *
+ * These macros help with converting instructions between a canonical integer
+ * format and in-memory representation, in an endianness-agnostic manner.
+ *
+ * __mem_to_opcode_*() convert from in-memory representation to canonical form.
+ * __opcode_to_mem_*() convert from canonical form to in-memory representation.
+ *
+ *
+ * Canonical instruction representation:
+ *
+ * ARM: 0xKKLLMMNN
+ * Thumb 16-bit: 0x0000KKLL, where KK < 0xE8
+ * Thumb 32-bit: 0xKKLLMMNN, where KK >= 0xE8
+ *
+ * There is no way to distinguish an ARM instruction in canonical representation
+ * from a Thumb instruction (just as these cannot be distinguished in memory).
+ * Where this distinction is important, it needs to be tracked separately.
+ *
+ * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
+ * represent any valid Thumb-2 instruction. For this range,
+ * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
+ *
+ * The ___asm variants are intended only for use by this header, in situations
+ * involving inline assembler. For .S files, the normal __opcode_*() macros
+ * should do the right thing.
+ */
+#ifdef __ASSEMBLY__
+
+#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
+#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
+#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
+#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
+#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
+#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
+
+#else /* ! __ASSEMBLY__ */
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define ___opcode_swab32(x) swab32(x)
+#define ___opcode_swab16(x) swab16(x)
+#define ___opcode_swahb32(x) swahb32(x)
+#define ___opcode_swahw32(x) swahw32(x)
+#define ___opcode_identity32(x) ((u32)(x))
+#define ___opcode_identity16(x) ((u16)(x))
+
+#endif /* ! __ASSEMBLY__ */
+
+
+#ifdef CONFIG_CPU_ENDIAN_BE8
+
+#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
+#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
+
+#else /* ! CONFIG_CPU_ENDIAN_BE8 */
+
+#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
+/*
+ * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
+ * work in all cases, due to alignment constraints. For now, a correct
+ * version is not provided for BE32.
+ */
+#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
+#endif
+
+#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
+
+#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
+#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
+#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
+#endif
+
+/* Operations specific to Thumb opcodes */
+
+/* Instruction size checks: */
+#define __opcode_is_thumb32(x) ( \
+ ((x) & 0xF8000000) == 0xE8000000 \
+ || ((x) & 0xF0000000) == 0xF0000000 \
+)
+#define __opcode_is_thumb16(x) ( \
+ ((x) & 0xFFFF0000) == 0 \
+ && !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000) \
+)
+
+/* Operations to construct or split 32-bit Thumb instructions: */
+#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16))
+#define __opcode_thumb32_second(x) (___opcode_identity16(x))
+#define __opcode_thumb32_compose(first, second) ( \
+ (___opcode_identity32(___opcode_identity16(first)) << 16) \
+ | ___opcode_identity32(___opcode_identity16(second)) \
+)
+#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16))
+#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x))
+#define ___asm_opcode_thumb32_compose(first, second) ( \
+ (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \
+ | ___asm_opcode_identity32(___asm_opcode_identity16(second)) \
+)
+
+/*
+ * Opcode injection helpers
+ *
+ * In rare cases it is necessary to assemble an opcode which the
+ * assembler does not support directly, or which would normally be
+ * rejected because of the CFLAGS or AFLAGS used to build the affected
+ * file.
+ *
+ * Before using these macros, consider carefully whether it is feasible
+ * instead to change the build flags for your file, or whether it really
+ * makes sense to support old assembler versions when building that
+ * particular kernel feature.
+ *
+ * The macros defined here should only be used where there is no viable
+ * alternative.
+ *
+ *
+ * __inst_arm(x): emit the specified ARM opcode
+ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
+ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
+ *
+ * __inst_arm_thumb16(arm, thumb): emit either the specified arm or
+ * 16-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ * kernel is being built
+ *
+ * __inst_arm_thumb32(arm, thumb): emit either the specified arm or
+ * 32-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ * kernel is being built
+ *
+ *
+ * Note that using these macros directly is poor practice. Instead, you
+ * should use them to define human-readable wrapper macros to encode the
+ * instructions that you care about. In code which might run on ARMv7 or
+ * above, you can usually use the __inst_arm_thumb{16,32} macros to
+ * specify the ARM and Thumb alternatives at the same time. This ensures
+ * that the correct opcode gets emitted depending on the instruction set
+ * used for the kernel build.
+ *
+ * Look at opcodes-virt.h for an example of how to use these macros.
+ */
+#include <linux/stringify.h>
+
+#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
+#define __inst_thumb32(x) ___inst_thumb32( \
+ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)), \
+ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x)) \
+)
+#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
+ __inst_thumb16(thumb_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
+ __inst_thumb32(thumb_opcode)
+#else
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#endif
+
+/* Helpers for the helpers. Don't use these directly. */
+#ifdef __ASSEMBLY__
+#define ___inst_arm(x) .long x
+#define ___inst_thumb16(x) .short x
+#define ___inst_thumb32(first, second) .short first, second
+#else
+#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
+#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
+#define ___inst_thumb32(first, second) \
+ ".short " __stringify(first) ", " __stringify(second) "\n\t"
+#endif
+
+#endif /* __ASM_ARM_OPCODES_H */
@@ -14,6 +14,7 @@
#include <common.h>
#include <linux/kbuild.h>
+#include <linux/arm-smccc.h>
#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) \
|| defined(CONFIG_MX51) || defined(CONFIG_MX53)
@@ -198,5 +199,12 @@ int main(void)
DEFINE(PLL_DP_HFS_MFN, offsetof(struct dpll, dp_hfs_mfn));
#endif
+#ifdef CONFIG_ARM_SMCCC
+ DEFINE(ARM_SMCCC_RES_X0_OFFS, offsetof(struct arm_smccc_res, a0));
+ DEFINE(ARM_SMCCC_RES_X2_OFFS, offsetof(struct arm_smccc_res, a2));
+ DEFINE(ARM_SMCCC_QUIRK_ID_OFFS, offsetof(struct arm_smccc_quirk, id));
+ DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS, offsetof(struct arm_smccc_quirk, state));
+#endif
+
return 0;
}
new file mode 100644
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#ifndef __LINUX_ARM_SMCCC_H
+#define __LINUX_ARM_SMCCC_H
+
+/*
+ * This file provides common defines for ARM SMC Calling Convention as
+ * specified in
+ * http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
+ */
+
+#define ARM_SMCCC_STD_CALL 0
+#define ARM_SMCCC_FAST_CALL 1
+#define ARM_SMCCC_TYPE_SHIFT 31
+
+#define ARM_SMCCC_SMC_32 0
+#define ARM_SMCCC_SMC_64 1
+#define ARM_SMCCC_CALL_CONV_SHIFT 30
+
+#define ARM_SMCCC_OWNER_MASK 0x3F
+#define ARM_SMCCC_OWNER_SHIFT 24
+
+#define ARM_SMCCC_FUNC_MASK 0xFFFF
+
+#define ARM_SMCCC_IS_FAST_CALL(smc_val) \
+ ((smc_val) & (ARM_SMCCC_FAST_CALL << ARM_SMCCC_TYPE_SHIFT))
+#define ARM_SMCCC_IS_64(smc_val) \
+ ((smc_val) & (ARM_SMCCC_SMC_64 << ARM_SMCCC_CALL_CONV_SHIFT))
+#define ARM_SMCCC_FUNC_NUM(smc_val) ((smc_val) & ARM_SMCCC_FUNC_MASK)
+#define ARM_SMCCC_OWNER_NUM(smc_val) \
+ (((smc_val) >> ARM_SMCCC_OWNER_SHIFT) & ARM_SMCCC_OWNER_MASK)
+
+#define ARM_SMCCC_CALL_VAL(type, calling_convention, owner, func_num) \
+ (((type) << ARM_SMCCC_TYPE_SHIFT) | \
+ ((calling_convention) << ARM_SMCCC_CALL_CONV_SHIFT) | \
+ (((owner) & ARM_SMCCC_OWNER_MASK) << ARM_SMCCC_OWNER_SHIFT) | \
+ ((func_num) & ARM_SMCCC_FUNC_MASK))
+
+#define ARM_SMCCC_OWNER_ARCH 0
+#define ARM_SMCCC_OWNER_CPU 1
+#define ARM_SMCCC_OWNER_SIP 2
+#define ARM_SMCCC_OWNER_OEM 3
+#define ARM_SMCCC_OWNER_STANDARD 4
+#define ARM_SMCCC_OWNER_TRUSTED_APP 48
+#define ARM_SMCCC_OWNER_TRUSTED_APP_END 49
+#define ARM_SMCCC_OWNER_TRUSTED_OS 50
+#define ARM_SMCCC_OWNER_TRUSTED_OS_END 63
+
+#define ARM_SMCCC_QUIRK_NONE 0
+#define ARM_SMCCC_QUIRK_QCOM_A6 1 /* Save/restore register a6 */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/types.h>
+/**
+ * struct arm_smccc_res - Result from SMC/HVC call
+ * @a0-a3 result values from registers 0 to 3
+ */
+struct arm_smccc_res {
+ unsigned long a0;
+ unsigned long a1;
+ unsigned long a2;
+ unsigned long a3;
+};
+
+/**
+ * struct arm_smccc_quirk - Contains quirk information
+ * @id: quirk identification
+ * @state: quirk specific information
+ * @a6: Qualcomm quirk entry for returning post-smc call contents of a6
+ */
+struct arm_smccc_quirk {
+ int id;
+ union {
+ unsigned long a6;
+ } state;
+};
+
+/**
+ * __arm_smccc_smc() - make SMC calls
+ * @a0-a7: arguments passed in registers 0 to 7
+ * @res: result values from registers 0 to 3
+ * @quirk: points to an arm_smccc_quirk, or NULL when no quirks are required.
+ *
+ * This function is used to make SMC calls following SMC Calling Convention.
+ * The content of the supplied param are copied to registers 0 to 7 prior
+ * to the SMC instruction. The return values are updated with the content
+ * from register 0 to 3 on return from the SMC instruction. An optional
+ * quirk structure provides vendor specific behavior.
+ */
+asmlinkage void __arm_smccc_smc(unsigned long a0, unsigned long a1,
+ unsigned long a2, unsigned long a3, unsigned long a4,
+ unsigned long a5, unsigned long a6, unsigned long a7,
+ struct arm_smccc_res *res, struct arm_smccc_quirk *quirk);
+
+/**
+ * __arm_smccc_hvc() - make HVC calls
+ * @a0-a7: arguments passed in registers 0 to 7
+ * @res: result values from registers 0 to 3
+ * @quirk: points to an arm_smccc_quirk, or NULL when no quirks are required.
+ *
+ * This function is used to make HVC calls following SMC Calling
+ * Convention. The content of the supplied param are copied to registers 0
+ * to 7 prior to the HVC instruction. The return values are updated with
+ * the content from register 0 to 3 on return from the HVC instruction. An
+ * optional quirk structure provides vendor specific behavior.
+ */
+asmlinkage void __arm_smccc_hvc(unsigned long a0, unsigned long a1,
+ unsigned long a2, unsigned long a3, unsigned long a4,
+ unsigned long a5, unsigned long a6, unsigned long a7,
+ struct arm_smccc_res *res, struct arm_smccc_quirk *quirk);
+
+#define arm_smccc_smc(...) __arm_smccc_smc(__VA_ARGS__, NULL)
+
+#define arm_smccc_smc_quirk(...) __arm_smccc_smc(__VA_ARGS__)
+
+#define arm_smccc_hvc(...) __arm_smccc_hvc(__VA_ARGS__, NULL)
+
+#define arm_smccc_hvc_quirk(...) __arm_smccc_hvc(__VA_ARGS__)
+
+#endif /*__ASSEMBLY__*/
+#endif /*__LINUX_ARM_SMCCC_H*/
This imports ARM SMC Calling Convention code from Linux 4.11-rc6. The files have been copied as follows: [Linux] [U-Boot] arch/arm/kernel/smccc-call.S -> arch/arm/cpu/armv7/smccc-call.S arch/arm64/kernel/smccc-call.S -> arch/arm/cpu/armv8/smccc-call.S arch/arm/include/asm/opcodes* -> arch/arm/include/asm/opcodes* include/linux/arm-smccc.h -> include/linux/arm-smccc.h They needed to be adjusted for U-Boot: - Replace the license block with SPDX - Adjust path to asm-offsets.h - define UNWIND() as no-op Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm/Kconfig | 8 ++ arch/arm/cpu/armv7/Makefile | 1 + arch/arm/cpu/armv7/smccc-call.S | 56 +++++++++ arch/arm/cpu/armv8/Makefile | 2 + arch/arm/cpu/armv8/smccc-call.S | 44 +++++++ arch/arm/include/asm/opcodes-sec.h | 17 +++ arch/arm/include/asm/opcodes-virt.h | 27 +++++ arch/arm/include/asm/opcodes.h | 229 ++++++++++++++++++++++++++++++++++++ arch/arm/lib/asm-offsets.c | 8 ++ include/linux/arm-smccc.h | 126 ++++++++++++++++++++ 10 files changed, 518 insertions(+) create mode 100644 arch/arm/cpu/armv7/smccc-call.S create mode 100644 arch/arm/cpu/armv8/smccc-call.S create mode 100644 arch/arm/include/asm/opcodes-sec.h create mode 100644 arch/arm/include/asm/opcodes-virt.h create mode 100644 arch/arm/include/asm/opcodes.h create mode 100644 include/linux/arm-smccc.h