@@ -476,6 +476,16 @@ config VIDEO_SAMSUNG_S5P_CEC
CEC bus is present in the HDMI connector and enables communication
between compatible devices.
+config VIDEO_STI_HDMI_CEC
+ tristate "STMicroelectronics STiH4xx HDMI CEC driver"
+ depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_STI || COMPILE_TEST)
+ select MEDIA_CEC_NOTIFIER
+ ---help---
+ This is a driver for STIH4xx HDMI CEC interface. It uses the
+ generic CEC framework interface.
+ CEC bus is present in the HDMI connector and enables communication
+ between compatible devices.
+
endif #V4L_CEC_DRIVERS
menuconfig V4L_TEST_DRIVERS
@@ -39,6 +39,7 @@ obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc/
obj-$(CONFIG_VIDEO_STI_BDISP) += sti/bdisp/
obj-$(CONFIG_VIDEO_STI_HVA) += sti/hva/
obj-$(CONFIG_DVB_C8SECTPFE) += sti/c8sectpfe/
+obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += sti/cec/
obj-$(CONFIG_VIDEO_STI_DELTA) += sti/delta/
similarity index 100%
rename from drivers/staging/media/st-cec/Makefile
rename to drivers/media/platform/sti/cec/Makefile
similarity index 93%
rename from drivers/staging/media/st-cec/stih-cec.c
rename to drivers/media/platform/sti/cec/stih-cec.c
@@ -1,6 +1,4 @@
/*
- * drivers/staging/media/st-cec/stih-cec.c
- *
* STIH4xx CEC driver
* Copyright (C) STMicroelectronic SA 2016
*
@@ -15,9 +13,11 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <media/cec.h>
+#include <media/cec-notifier.h>
#define CEC_NAME "stih-cec"
@@ -129,6 +129,7 @@ struct stih_cec {
void __iomem *regs;
int irq;
u32 irq_status;
+ struct cec_notifier *notifier;
};
static int stih_cec_adap_enable(struct cec_adapter *adap, bool enable)
@@ -303,12 +304,29 @@ static int stih_cec_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct resource *res;
struct stih_cec *cec;
+ struct device_node *np;
+ struct platform_device *hdmi_dev;
int ret;
cec = devm_kzalloc(dev, sizeof(*cec), GFP_KERNEL);
if (!cec)
return -ENOMEM;
+ np = of_parse_phandle(pdev->dev.of_node, "hdmi-phandle", 0);
+
+ if (!np) {
+ dev_err(&pdev->dev, "Failed to find hdmi node in device tree\n");
+ return -ENODEV;
+ }
+
+ hdmi_dev = of_find_device_by_node(np);
+ if (!hdmi_dev)
+ return -EPROBE_DEFER;
+
+ cec->notifier = cec_notifier_get(&hdmi_dev->dev);
+ if (!cec->notifier)
+ return -ENOMEM;
+
cec->dev = dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -335,7 +353,7 @@ static int stih_cec_probe(struct platform_device *pdev)
cec->adap = cec_allocate_adapter(&sti_cec_adap_ops, cec,
CEC_NAME,
CEC_CAP_LOG_ADDRS | CEC_CAP_PASSTHROUGH |
- CEC_CAP_PHYS_ADDR | CEC_CAP_TRANSMIT, 1);
+ CEC_CAP_TRANSMIT, 1);
ret = PTR_ERR_OR_ZERO(cec->adap);
if (ret)
return ret;
@@ -346,12 +364,19 @@ static int stih_cec_probe(struct platform_device *pdev)
return ret;
}
+ cec_register_cec_notifier(cec->adap, cec->notifier);
+
platform_set_drvdata(pdev, cec);
return 0;
}
static int stih_cec_remove(struct platform_device *pdev)
{
+ struct stih_cec *cec = platform_get_drvdata(pdev);
+
+ cec_unregister_adapter(cec->adap);
+ cec_notifier_put(cec->notifier);
+
return 0;
}
@@ -32,6 +32,4 @@ source "drivers/staging/media/platform/bcm2835/Kconfig"
# Keep LIRC at the end, as it has sub-menus
source "drivers/staging/media/lirc/Kconfig"
-source "drivers/staging/media/st-cec/Kconfig"
-
endif
@@ -4,4 +4,3 @@ obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_VIDEO_BCM2835) += platform/bcm2835/
obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/
obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/
-obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += st-cec/
deleted file mode 100644
@@ -1,8 +0,0 @@
-config VIDEO_STI_HDMI_CEC
- tristate "STMicroelectronics STiH4xx HDMI CEC driver"
- depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_STI || COMPILE_TEST)
- ---help---
- This is a driver for STIH4xx HDMI CEC interface. It uses the
- generic CEC framework interface.
- CEC bus is present in the HDMI connector and enables communication
- between compatible devices.
deleted file mode 100644
@@ -1,7 +0,0 @@
-This driver requires that userspace sets the physical address.
-However, this should be passed on from the corresponding
-ST HDMI driver.
-
-We have to wait until the HDMI notifier framework has been merged
-in order to handle this gracefully, until that time this driver
-has to remain in staging.