diff mbox series

[v2,2/2] usb: phy: phy-qcom-8x16-usb: Remove redundant extcon register/unregister

Message ID d19bafd4ea13a3e82660e083f57b1d2d25a762ea.1490248054.git.baolin.wang@linaro.org
State Superseded
Headers show
Series [v2,1/2] usb: phy: Introduce one extcon device into usb phy | expand

Commit Message

(Exiting) Baolin Wang March 23, 2017, 5:54 a.m. UTC 
Since usb phy core has added common code to register or unregister
extcon device, then phy-qcom-8x16-usb driver does not need its own
code to register/unregister extcon device, then remove them.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

---
Changes since v1:
 - No updates.
---
 drivers/usb/phy/phy-qcom-8x16-usb.c |   20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

(Exiting) Baolin Wang March 30, 2017, 3:26 a.m. UTC | #1 
Hi,

On 28 March 2017 at 21:42, Felipe Balbi <balbi@kernel.org> wrote:
>

> Hi,

>

> Baolin Wang <baolin.wang@linaro.org> writes:

>> Since usb phy core has added common code to register or unregister

>> extcon device, then phy-qcom-8x16-usb driver does not need its own

>> code to register/unregister extcon device, then remove them.

>>

>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

>

> so previous patch helped *ONE* single user? Was it really beneficial if

> it's all for a single user? Which duplicated code did it remove?


Now only 3 USB phy drivers (phy-qcom-8x16-usb.c, phy-omap-otg.c and
phy-msm-usb.c) had registered an extcon, mostly did not.
phy-omap-otg.c did not add one usb phy, so I did not convert it.
phy-msm-usb.c had 2 separate extcon devices, but my last patch did not
support separate extcon devices which need to modify again. Moreover
in future usb phy drivers do not need to implement extcon things in
their own drivers.

-- 
Baolin.wang
Best Regards
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c
index fdf6863..b6a83a5 100644
--- a/drivers/usb/phy/phy-qcom-8x16-usb.c
+++ b/drivers/usb/phy/phy-qcom-8x16-usb.c
@@ -69,9 +69,6 @@  struct phy_8x16 {
 
 	struct reset_control		*phy_reset;
 
-	struct extcon_dev		*vbus_edev;
-	struct notifier_block		vbus_notify;
-
 	struct gpio_desc		*switch_gpio;
 	struct notifier_block		reboot_notify;
 };
@@ -131,7 +128,8 @@  static int phy_8x16_vbus_off(struct phy_8x16 *qphy)
 static int phy_8x16_vbus_notify(struct notifier_block *nb, unsigned long event,
 				void *ptr)
 {
-	struct phy_8x16 *qphy = container_of(nb, struct phy_8x16, vbus_notify);
+	struct usb_phy *usb_phy = container_of(nb, struct usb_phy, vbus_nb);
+	struct phy_8x16 *qphy = container_of(usb_phy, struct phy_8x16, phy);
 
 	if (event)
 		phy_8x16_vbus_on(qphy);
@@ -187,7 +185,7 @@  static int phy_8x16_init(struct usb_phy *phy)
 	val = ULPI_PWR_OTG_COMP_DISABLE;
 	usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));
 
-	state = extcon_get_state(qphy->vbus_edev, EXTCON_USB);
+	state = extcon_get_state(qphy->phy.edev, EXTCON_USB);
 	if (state)
 		phy_8x16_vbus_on(qphy);
 	else
@@ -289,15 +287,13 @@  static int phy_8x16_probe(struct platform_device *pdev)
 	phy->io_priv		= qphy->regs + HSPHY_ULPI_VIEWPORT;
 	phy->io_ops		= &ulpi_viewport_access_ops;
 	phy->type		= USB_PHY_TYPE_USB2;
+	phy->vbus_nb.notifier_call = phy_8x16_vbus_notify;
+	phy->id_nb.notifier_call = NULL;
 
 	ret = phy_8x16_read_devicetree(qphy);
 	if (ret < 0)
 		return ret;
 
-	qphy->vbus_edev = extcon_get_edev_by_phandle(phy->dev, 0);
-	if (IS_ERR(qphy->vbus_edev))
-		return PTR_ERR(qphy->vbus_edev);
-
 	ret = clk_set_rate(qphy->core_clk, INT_MAX);
 	if (ret < 0)
 		dev_dbg(phy->dev, "Can't boost core clock\n");
@@ -315,12 +311,6 @@  static int phy_8x16_probe(struct platform_device *pdev)
 	if (WARN_ON(ret))
 		goto off_clks;
 
-	qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify;
-	ret = devm_extcon_register_notifier(&pdev->dev, qphy->vbus_edev,
-					EXTCON_USB, &qphy->vbus_notify);
-	if (ret < 0)
-		goto off_power;
-
 	ret = usb_add_phy_dev(&qphy->phy);
 	if (ret)
 		goto off_power;