diff mbox

[2/2,Resend] ARM: EXYNOS: Add HSOTG support to SMDK4X12

Message ID 1340166917-25657-2-git-send-email-sachin.kamat@linaro.org
State Superseded
Headers show

Commit Message

Sachin Kamat June 20, 2012, 4:35 a.m. UTC 
S3C-HSOTG support is added to SMDK4212 and SMDK4412 boards.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
Based on v3.5-for-usb-2 branch of Kukjin's tree
---
 arch/arm/mach-exynos/Kconfig         |    2 ++
 arch/arm/mach-exynos/mach-smdk4x12.c |    7 +++++++
 2 files changed, 9 insertions(+), 0 deletions(-)

Comments

Kukjin Kim June 21, 2012, 12:17 a.m. UTC | #1 
Sachin Kamat wrote:
> 
> S3C-HSOTG support is added to SMDK4212 and SMDK4412 boards.
> 
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> ---
> Based on v3.5-for-usb-2 branch of Kukjin's tree

Would be helpful to me if you could re-work this against on
next/board-samsung.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
diff mbox

Patch

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 6682f35..95e3ee3 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -349,6 +349,7 @@  config MACH_SMDK4212
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C7
 	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
@@ -359,6 +360,7 @@  config MACH_SMDK4212
 	select EXYNOS4_SETUP_I2C7
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDK4212
 
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index d00e4f0..91fbdea 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -19,6 +19,7 @@ 
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/machine.h>
 #include <linux/serial_core.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -235,6 +236,9 @@  static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
 	.cols		= 5,
 };
 
+/* USB OTG */
+static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
+
 static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
@@ -243,6 +247,7 @@  static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_i2c3,
 	&s3c_device_i2c7,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&samsung_device_keypad,
 };
@@ -281,6 +286,8 @@  static void __init smdk4x12_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
 
+	s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
+
 	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
 }