diff mbox series

[v4,10/10] ARM: dts: STiH410-b2260: Enable HW flow-control

Message ID 20170203102319.23489-11-lee.jones@linaro.org
State Accepted
Commit 36523b6830fa468ae9e0335601aed475480b7dd3
Headers show
Series [v4,01/10] serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled | expand

Commit Message

Lee Jones Feb. 3, 2017, 10:23 a.m. UTC
Hardware flow-control capability must be specified at a platform
level in order to inform the ASC driver that the platform is capable
(i.e. are the lines wired up, etc).  STiH4{07,10} devices are indeed
capable, so let's provide the property.

Acked-by: Peter Griffin <peter.griffin@linaro.org>

Signed-off-by: Lee Jones <lee.jones@linaro.org>

---
 arch/arm/boot/dts/stih410-b2260.dts | 1 +
 1 file changed, 1 insertion(+)

-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index cbcbcb4..93c14d1 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -66,6 +66,7 @@ 
 			pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
 			pinctrl-1 = <&pinctrl_serial0>;
 			rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
+			uart-has-rtscts;
 			status = "okay";
 		};