@@ -5,7 +5,6 @@ Required properties:
- compatible : "samsung,exynos5433-lpass"
- reg : should contain the LPASS top SFR region location
and size
- - samsung,pmu-syscon : the phandle to the Power Management Unit node
- #address-cells : should be 1
- #size-cells : should be 1
- ranges : must be present
@@ -25,7 +24,6 @@ Example:
audio-subsystem {
compatible = "samsung,exynos5433-lpass";
reg = <0x11400000 0x100>, <0x11500000 0x08>;
- samsung,pmu-syscon = <&pmu_system_controller>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -18,7 +18,6 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/exynos5-pmu.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
@@ -51,8 +50,6 @@
#define LPASS_INTR_SFR BIT(0)
struct exynos_lpass {
- /* pointer to the Power Management Unit regmap */
- struct regmap *pmu;
/* pointer to the LPASS TOP regmap */
struct regmap *top;
};
@@ -81,10 +78,6 @@ static void exynos_lpass_enable(struct exynos_lpass *lpass)
regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK,
LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S);
- /* Activate related PADs from retention state */
- regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION,
- EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR);
-
exynos_lpass_core_sw_reset(lpass, LPASS_I2S_SW_RESET);
exynos_lpass_core_sw_reset(lpass, LPASS_DMA_SW_RESET);
exynos_lpass_core_sw_reset(lpass, LPASS_MEM_SW_RESET);
@@ -95,9 +88,6 @@ static void exynos_lpass_disable(struct exynos_lpass *lpass)
/* Mask any unmasked IP interrupt sources */
regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK, 0);
regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, 0);
-
- /* Deactivate related PADs from retention state */
- regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION, 0);
}
static const struct regmap_config exynos_lpass_reg_conf = {
@@ -131,13 +121,6 @@ static int exynos_lpass_probe(struct platform_device *pdev)
return PTR_ERR(lpass->top);
}
- lpass->pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
- "samsung,pmu-syscon");
- if (IS_ERR(lpass->pmu)) {
- dev_err(dev, "Failed to lookup PMU regmap\n");
- return PTR_ERR(lpass->pmu);
- }
-
platform_set_drvdata(pdev, lpass);
exynos_lpass_enable(lpass);
@@ -46,7 +46,4 @@
#define EXYNOS5_MIPI_PHY_S_RESETN BIT(1)
#define EXYNOS5_MIPI_PHY_M_RESETN BIT(2)
-#define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028)
-#define EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR BIT(28)
-
#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */