@@ -60,6 +60,13 @@ config PCI_EXYNOS
select PCIEPORTBUS
select PCIE_DW
+config PCI_GEMINI
+ bool "Cortina Gemini SL351x PCI roller"
+ depends on ARCH_GEMINI
+ depends on ARM
+ depends on OF
+ default ARCH_GEMINI
+
config PCI_IMX6
bool "Freescale i.MX6 PCIe controller"
depends on SOC_IMX6Q
@@ -2,6 +2,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
+obj-$(CONFIG_PCI_GEMINI) += pci-gemini.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
new file mode 100644
@@ -0,0 +1,375 @@
+/*
+ * Support for Gemini PCI Controller
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on the out-of-tree OpenWRT patch:
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Based on SL2312 PCI controller code
+ * Storlink (C) 2003
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+
+#define GEMINI_PCI_IOSIZE_1M 0x0000
+
+#define GEMINI_PCI_PMC 0x40
+#define GEMINI_PCI_PMCSR 0x44
+#define GEMINI_PCI_CTRL1 0x48
+#define GEMINI_PCI_CTRL2 0x4C
+#define GEMINI_PCI_MEM1_BASE_SIZE 0x50
+#define GEMINI_PCI_MEM2_BASE_SIZE 0x54
+#define GEMINI_PCI_MEM3_BASE_SIZE 0x58
+
+#define PCI_CTRL2_INTSTS_SHIFT 28
+#define PCI_CTRL2_INTMASK_SHIFT 22
+
+#define GEMINI_PCI_DMA_MASK 0xFFF00000
+#define GEMINI_PCI_DMA_MEM1_BASE 0x00000000
+#define GEMINI_PCI_DMA_MEM2_BASE 0x00000000
+#define GEMINI_PCI_DMA_MEM3_BASE 0x00000000
+#define GEMINI_PCI_DMA_MEM1_SIZE 7
+#define GEMINI_PCI_DMA_MEM2_SIZE 6
+#define GEMINI_PCI_DMA_MEM3_SIZE 6
+
+#define PCI_CONF_ENABLE BIT(31)
+#define PCI_CONF_WHERE(r) ((r) & 0xFC)
+#define PCI_CONF_BUS(b) (((b) & 0xFF) << 16)
+#define PCI_CONF_DEVICE(d) (((d) & 0x1F) << 11)
+#define PCI_CONF_FUNCTION(f) (((f) & 0x07) << 8)
+
+#define PCI_IOSIZE 0x00
+#define PCI_PROT 0x04
+#define PCI_CTRL 0x08
+#define PCI_SOFTRST 0x10
+#define PCI_CONFIG 0x28
+#define PCI_DATA 0x2C
+
+struct gemini_pci {
+ struct device *dev;
+ void __iomem *base;
+ struct irq_domain *irqdomain;
+ spinlock_t lock;
+ struct pci_bus *bus;
+};
+
+static int gemini_pci_read_config(struct pci_bus *bus, unsigned int fn,
+ int config, int size, u32 *value)
+{
+ struct gemini_pci *p = bus->sysdata;
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&p->lock, irq_flags);
+
+ writel(PCI_CONF_BUS(bus->number) |
+ PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+ PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+ PCI_CONF_WHERE(config) |
+ PCI_CONF_ENABLE,
+ p->base + PCI_CONFIG);
+
+ *value = readl(p->base + PCI_DATA);
+
+ if (size == 1)
+ *value = (*value >> (8 * (config & 3))) & 0xFF;
+ else if (size == 2)
+ *value = (*value >> (8 * (config & 3))) & 0xFFFF;
+
+ spin_unlock_irqrestore(&p->lock, irq_flags);
+
+ dev_dbg(&bus->dev,
+ "[read] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+ PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int gemini_pci_write_config(struct pci_bus *bus, unsigned int fn,
+ int config, int size, u32 value)
+{
+ struct gemini_pci *p = bus->sysdata;
+ unsigned long irq_flags = 0;
+ int ret = PCIBIOS_SUCCESSFUL;
+
+ dev_dbg(&bus->dev,
+ "[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+ PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
+
+ spin_lock_irqsave(&p->lock, irq_flags);
+
+ writel(PCI_CONF_BUS(bus->number) |
+ PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+ PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+ PCI_CONF_WHERE(config) |
+ PCI_CONF_ENABLE,
+ p->base + PCI_CONFIG);
+
+ switch (size) {
+ case 4:
+ writel(value, p->base + PCI_DATA);
+ break;
+ case 2:
+ writew(value, p->base + PCI_DATA + (config & 3));
+ break;
+ case 1:
+ writeb(value, p->base + PCI_DATA + (config & 3));
+ break;
+ default:
+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&p->lock, irq_flags);
+
+ return ret;
+}
+
+static struct pci_ops gemini_pci_ops = {
+ .read = gemini_pci_read_config,
+ .write = gemini_pci_write_config,
+};
+
+static void gemini_pci_ack_irq(struct irq_data *d)
+{
+ struct gemini_pci *p = irq_data_get_irq_chip_data(d);
+ unsigned int reg;
+
+ gemini_pci_read_config(p->bus, 0, GEMINI_PCI_CTRL2, 4, ®);
+ reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+ reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTSTS_SHIFT);
+ gemini_pci_write_config(p->bus, 0, GEMINI_PCI_CTRL2, 4, reg);
+}
+
+static void gemini_pci_mask_irq(struct irq_data *d)
+{
+ struct gemini_pci *p = irq_data_get_irq_chip_data(d);
+ unsigned int reg;
+
+ gemini_pci_read_config(p->bus, 0, GEMINI_PCI_CTRL2, 4, ®);
+ reg &= ~((0xF << PCI_CTRL2_INTSTS_SHIFT)
+ | BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT));
+ gemini_pci_write_config(p->bus, 0, GEMINI_PCI_CTRL2, 4, reg);
+}
+
+static void gemini_pci_unmask_irq(struct irq_data *d)
+{
+ struct gemini_pci *p = irq_data_get_irq_chip_data(d);
+ unsigned int reg;
+
+ gemini_pci_read_config(p->bus, 0, GEMINI_PCI_CTRL2, 4, ®);
+ reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+ reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT);
+ gemini_pci_write_config(p->bus, 0, GEMINI_PCI_CTRL2, 4, reg);
+}
+
+static void gemini_pci_irq_handler(struct irq_desc *desc)
+{
+ struct gemini_pci *p = irq_desc_get_handler_data(desc);
+ struct irq_chip *irqchip = irq_desc_get_chip(desc);
+ unsigned int irq_stat, reg, i;
+
+ gemini_pci_read_config(p->bus, 0, GEMINI_PCI_CTRL2, 4, ®);
+ irq_stat = reg >> PCI_CTRL2_INTSTS_SHIFT;
+
+ chained_irq_enter(irqchip, desc);
+
+ for (i = 0; i < 4; i++) {
+ if ((irq_stat & BIT(i)) == 0)
+ continue;
+ generic_handle_irq(irq_find_mapping(p->irqdomain, i));
+ }
+
+ chained_irq_exit(irqchip, desc);
+}
+
+static struct irq_chip gemini_pci_irq_chip = {
+ .name = "PCI",
+ .irq_ack = gemini_pci_ack_irq,
+ .irq_mask = gemini_pci_mask_irq,
+ .irq_unmask = gemini_pci_unmask_irq,
+};
+
+static int gemini_pci_irq_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &gemini_pci_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, domain->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops gemini_pci_irqdomain_ops = {
+ .map = gemini_pci_irq_map,
+};
+
+static int gemini_pci_setup_irq(struct gemini_pci *p, int irq)
+{
+ struct device_node *intc = of_get_next_child(p->dev->of_node, NULL);
+ int i;
+
+ if (!intc) {
+ dev_err(p->dev, "missing child interrupt-controller node\n");
+ return -EINVAL;
+ }
+
+ p->irqdomain = irq_domain_add_linear(intc, 4,
+ &gemini_pci_irqdomain_ops,
+ p);
+ if (!p->irqdomain) {
+ dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n");
+ return -EINVAL;
+ }
+
+ irq_set_chained_handler_and_data(irq, gemini_pci_irq_handler, p);
+
+ for (i = 0; i < 4; i++)
+ irq_create_mapping(p->irqdomain, i);
+
+ return 0;
+}
+
+static int gemini_pci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *regs;
+ resource_size_t io_base;
+ struct resource_entry *win;
+ struct gemini_pci *p;
+ struct resource *mem;
+ struct resource *io;
+ struct pci_bus *bus;
+ int irq;
+ int ret;
+ u32 val;
+ LIST_HEAD(res);
+
+ p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ p->dev = dev;
+ spin_lock_init(&p->lock);
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ p->base = devm_ioremap_resource(dev, regs);
+ if (IS_ERR(p->base))
+ return PTR_ERR(p->base);
+
+ ret = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff,
+ &res, &io_base);
+ if (ret)
+ return ret;
+
+ ret = devm_request_pci_bus_resources(dev, &res);
+ if (ret)
+ return ret;
+
+ /* No clue what these do */
+ pcibios_min_io = 0x100;
+ pcibios_min_mem = 0;
+
+ /* setup I/O space to 1MB size */
+ writel(GEMINI_PCI_IOSIZE_1M, p->base + PCI_IOSIZE);
+
+ /* setup hostbridge */
+ val = readl(p->base + PCI_CTRL);
+ val |= PCI_COMMAND_IO;
+ val |= PCI_COMMAND_MEMORY;
+ val |= PCI_COMMAND_MASTER;
+ writel(val, p->base + PCI_CTRL);
+
+ /* Get the I/O and memory ranges from DT */
+ resource_list_for_each_entry(win, &res) {
+ switch (resource_type(win->res)) {
+ case IORESOURCE_IO:
+ io = win->res;
+ io->name = "Gemini PCI I/O";
+ ret = pci_remap_iospace(io, io_base);
+ if (ret) {
+ dev_warn(dev, "error %d: failed to map resource %pR\n",
+ ret, io);
+ continue;
+ }
+ break;
+ case IORESOURCE_MEM:
+ mem = win->res;
+ mem->name = "Gemini PCI MEM";
+ break;
+ case IORESOURCE_BUS:
+ break;
+ default:
+ break;
+ }
+ }
+
+ bus = pci_scan_root_bus(&pdev->dev, 0, &gemini_pci_ops, p, &res);
+ if (!bus)
+ return -ENOMEM;
+ p->bus = bus;
+
+ dev_info(dev, "clear all IRQs\n");
+
+ /* Mask and clear all interrupts */
+ gemini_pci_write_config(bus, 0, GEMINI_PCI_CTRL2 + 2, 2, 0xF000);
+
+ /* IRQ - all PCI IRQs cascade off this one */
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
+ dev_err(dev, "failed to get IRQ\n");
+ return -EINVAL;
+ }
+
+ ret = gemini_pci_setup_irq(p, irq);
+ if (ret) {
+ dev_err(dev, "failed to setup IRQ\n");
+ return ret;
+ }
+
+ dev_info(dev, "setting up PCI DMA\n");
+ val = (GEMINI_PCI_DMA_MEM1_BASE & GEMINI_PCI_DMA_MASK)
+ | (GEMINI_PCI_DMA_MEM1_SIZE << 16);
+ gemini_pci_write_config(bus, 0, GEMINI_PCI_MEM1_BASE_SIZE, 4, val);
+ val = (GEMINI_PCI_DMA_MEM2_BASE & GEMINI_PCI_DMA_MASK)
+ | (GEMINI_PCI_DMA_MEM2_SIZE << 16);
+ gemini_pci_write_config(bus, 0, GEMINI_PCI_MEM2_BASE_SIZE, 4, val);
+ val = (GEMINI_PCI_DMA_MEM3_BASE & GEMINI_PCI_DMA_MASK)
+ | (GEMINI_PCI_DMA_MEM3_SIZE << 16);
+ gemini_pci_write_config(bus, 0, GEMINI_PCI_MEM3_BASE_SIZE, 4, val);
+
+ pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+ pci_bus_assign_resources(bus);
+ pci_assign_unassigned_bus_resources(bus);
+ pci_bus_add_devices(bus);
+ pci_free_resource_list(&res);
+
+ return 0;
+}
+
+static const struct of_device_id gemini_pci_of_match[] = {
+ {
+ .compatible = "cortina,gemini-pci",
+ },
+ {},
+};
+
+static struct platform_driver gemini_pci_driver = {
+ .driver = {
+ .name = "gemini-pci",
+ .of_match_table = of_match_ptr(gemini_pci_of_match),
+ },
+ .probe = gemini_pci_probe,
+};
+builtin_platform_driver(gemini_pci_driver);
This adds a host bridge driver for the Cortina Systems Gemini SoC (SL3516) PCI Host Bridge. This code is inspired by the out-of-tree OpenWRT patch and then extensively rewritten for device tree and using the modern helpers to cut down and modernize the code to all new PCI frameworks. Tested on the ITian Square One SQ201 NAS with the following result in the boot log (trimmed to relevant parts): OF: PCI: host bridge /pci@50000000 ranges: OF: PCI: IO 0x50000000..0x500fffff -> 0x00000000 OF: PCI: MEM 0x58000000..0x5fffffff -> 0x58000000 gemini-pci 50000000.pci: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] pci_bus 0000:00: root bus resource [mem 0x58000000-0x5fffffff] pci 0000:00:00.0: [159b:4321] type 00 class 0x060000 pci 0000:00:09.0: [1106:3038] type 00 class 0x0c0300 pci 0000:00:09.0: reg 0x20: [io 0xfce0-0xfcff] pci 0000:00:09.0: supports D1 D2 pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.1: [1106:3038] type 00 class 0x0c0300 pci 0000:00:09.1: reg 0x20: [io 0xfce0-0xfcff] pci 0000:00:09.1: supports D1 D2 pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.2: [1106:3104] type 00 class 0x0c0320 pci 0000:00:09.2: reg 0x10: [mem 0x00000000-0x000000ff] pci 0000:00:09.2: supports D1 D2 pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: [1814:0301] type 00 class 0x028000 pci 0000:00:0c.0: reg 0x10: [mem 0x58000000-0x58007fff] PCI: bus0: Fast back to back transfers disabled gemini-pci 50000000.pci: clear all IRQs gemini-pci 50000000.pci: setting up PCI DMA pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22 pci 0000:00:0c.0: BAR 0: assigned [mem 0x58000000-0x58007fff] pci 0000:00:09.2: BAR 0: assigned [mem 0x58008000-0x580080ff] pci 0000:00:09.0: BAR 4: assigned [io 0x0400-0x041f] pci 0000:00:09.1: BAR 4: assigned [io 0x0420-0x043f] pci 0000:00:09.0: enabling device (0140 -> 0141) pci 0000:00:09.0: HCRESET not completed yet! pci 0000:00:09.1: enabling device (0140 -> 0141) pci 0000:00:09.1: HCRESET not completed yet! pci 0000:00:09.2: enabling device (0140 -> 0142) ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:09.2: EHCI Host Controller ehci-pci 0000:00:09.2: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:09.2: irq 146, io mem 0x58008000 ehci-pci 0000:00:09.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:09.0: UHCI Host Controller uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:09.0: HCRESET not completed yet! uhci_hcd 0000:00:09.0: irq 144, io base 0x00000400 hub 2-0:1.0: USB hub found hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) uhci_hcd 0000:00:09.1: UHCI Host Controller uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:09.1: HCRESET not completed yet! uhci_hcd 0000:00:09.1: irq 145, io base 0x00000420 hub 3-0:1.0: USB hub found hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19) usb 1-1: new high-speed USB device number 2 using ehci-pci usb-storage 1-1:1.0: USB Mass Storage device detected scsi host0: usb-storage 1-1:1.0 scsi 0:0:0:0: Direct-Access USB Flash Disk 1.00 PQ: 0 ANSI: 2 sd 0:0:0:0: [sda] 7900336 512-byte logical blocks: (4.04 GB/3.77 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08 sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI removable disk $ lspci 00:00.0 Class 0600: 159b:4321 00:09.2 Class 0c03: 1106:3104 00:09.0 Class 0c03: 1106:3038 00:09.1 Class 0c03: 1106:3038 00:0c.0 Class 0280: 1814:0301 cat /proc/interrupts CPU0 19: 0 GEMINI 3 Level watchdog bark 30: 4943 GEMINI 14 Edge Gemini Timer Tick 33: 0 GEMINI 17 Level 45000000.rtc 34: 651 GEMINI 18 Level serial 66: 0 GPIO 18 Edge factory reset 144: 0 PCI 0 Edge uhci_hcd:usb2 145: 0 PCI 1 Edge uhci_hcd:usb3 146: 160 PCI 2 Edge ehci_hcd:usb1 Well the EHCI USB hub works fine, I can mount and manage files and the IRQs just keep ticking up. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- This can be merged to the PCI tree whenever it is considered fine for inclusion. --- drivers/pci/host/Kconfig | 7 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-gemini.c | 375 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 383 insertions(+) create mode 100644 drivers/pci/host/pci-gemini.c -- 2.9.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel