| Message ID | 20170120185057.16206-4-stephen.boyd@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Support qcom's HSIC USB and rewrite USB2 HS support | expand |
> * @set_mode: set the mode of the phy >+ * @set_vbus: enable/disable vbus in the phy (USB) > * @reset: resetting the phy > * @owner: the module owner containing the ops > */ >@@ -45,6 +46,7 @@ struct phy_ops { > int (*power_on)(struct phy *phy); > int (*power_off)(struct phy *phy); > int (*set_mode)(struct phy *phy, enum phy_mode mode); >+ int (*set_vbus)(struct phy *phy, int on); How about using the name notify_vbus? The main purpose of this API is notify PHY vbus status. Peter -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Saturday 21 January 2017 12:20 AM, Stephen Boyd wrote: > Some USB PHYs need to be told about vbus changing state > explicitly. For example the qcom USB HS PHY needs to toggle a bit > when vbus goes from low to high (VBUSVLDEXT) to cause the > "session valid" signal to toggle. This signal will pull up D+ > when the phy starts running. If the vbus signal isn't routed to > the PHY this "session valid" signal won't ever toggle, so we have > to toggle it explicitly. This callback is used to do that. > > Cc: Peter Chen <peter.chen@nxp.com> > Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> > --- > > New patch > > drivers/phy/phy-core.c | 15 +++++++++++++++ > include/linux/phy/phy.h | 10 ++++++++++ > 2 files changed, 25 insertions(+) > > diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c > index a268f4d6f3e9..8b1a6bfa5133 100644 > --- a/drivers/phy/phy-core.c > +++ b/drivers/phy/phy-core.c > @@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode) > } > EXPORT_SYMBOL_GPL(phy_set_mode); > > +int phy_set_vbus(struct phy *phy, int on) > +{ > + int ret; > + > + if (!phy || !phy->ops->set_vbus) > + return 0; > + > + mutex_lock(&phy->mutex); > + ret = phy->ops->set_vbus(phy, on); > + mutex_unlock(&phy->mutex); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(phy_set_vbus); > + > int phy_reset(struct phy *phy) > { > int ret; > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h > index 78bb0d7f6b11..4d1ebde7fb14 100644 > --- a/include/linux/phy/phy.h > +++ b/include/linux/phy/phy.h > @@ -36,6 +36,7 @@ enum phy_mode { > * @power_on: powering on the phy > * @power_off: powering off the phy > * @set_mode: set the mode of the phy > + * @set_vbus: enable/disable vbus in the phy (USB) > * @reset: resetting the phy > * @owner: the module owner containing the ops > */ > @@ -45,6 +46,7 @@ struct phy_ops { > int (*power_on)(struct phy *phy); > int (*power_off)(struct phy *phy); > int (*set_mode)(struct phy *phy, enum phy_mode mode); > + int (*set_vbus)(struct phy *phy, int on); please avoid adding usb specific ops in generic phy ops. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoting Kishon Vijay Abraham I (2017-01-22 00:46:21) > Hi, > > On Saturday 21 January 2017 12:20 AM, Stephen Boyd wrote: > > Some USB PHYs need to be told about vbus changing state > > explicitly. For example the qcom USB HS PHY needs to toggle a bit > > when vbus goes from low to high (VBUSVLDEXT) to cause the > > "session valid" signal to toggle. This signal will pull up D+ > > when the phy starts running. If the vbus signal isn't routed to > > the PHY this "session valid" signal won't ever toggle, so we have > > to toggle it explicitly. This callback is used to do that. > > > > Cc: Peter Chen <peter.chen@nxp.com> > > Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> > > --- > > > > New patch > > > > drivers/phy/phy-core.c | 15 +++++++++++++++ > > include/linux/phy/phy.h | 10 ++++++++++ > > 2 files changed, 25 insertions(+) > > > > diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c > > index a268f4d6f3e9..8b1a6bfa5133 100644 > > --- a/drivers/phy/phy-core.c > > +++ b/drivers/phy/phy-core.c > > @@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode) > > } > > EXPORT_SYMBOL_GPL(phy_set_mode); > > > > +int phy_set_vbus(struct phy *phy, int on) > > +{ > > + int ret; > > + > > + if (!phy || !phy->ops->set_vbus) > > + return 0; > > + > > + mutex_lock(&phy->mutex); > > + ret = phy->ops->set_vbus(phy, on); > > + mutex_unlock(&phy->mutex); > > + > > + return ret; > > +} > > +EXPORT_SYMBOL_GPL(phy_set_vbus); > > + > > int phy_reset(struct phy *phy) > > { > > int ret; > > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h > > index 78bb0d7f6b11..4d1ebde7fb14 100644 > > --- a/include/linux/phy/phy.h > > +++ b/include/linux/phy/phy.h > > @@ -36,6 +36,7 @@ enum phy_mode { > > * @power_on: powering on the phy > > * @power_off: powering off the phy > > * @set_mode: set the mode of the phy > > + * @set_vbus: enable/disable vbus in the phy (USB) > > * @reset: resetting the phy > > * @owner: the module owner containing the ops > > */ > > @@ -45,6 +46,7 @@ struct phy_ops { > > int (*power_on)(struct phy *phy); > > int (*power_off)(struct phy *phy); > > int (*set_mode)(struct phy *phy, enum phy_mode mode); > > + int (*set_vbus)(struct phy *phy, int on); > > please avoid adding usb specific ops in generic phy ops. > Is there any alternative? Something has to happen here. The only other thing I can think of is putting back the vbus extcon in the phy driver so it can be notified when vbus is present or not. I can rely on phy_set_mode() being called so that we don't need to figure out if we're in host mode or not like was being done before. -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index a268f4d6f3e9..8b1a6bfa5133 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode) } EXPORT_SYMBOL_GPL(phy_set_mode); +int phy_set_vbus(struct phy *phy, int on) +{ + int ret; + + if (!phy || !phy->ops->set_vbus) + return 0; + + mutex_lock(&phy->mutex); + ret = phy->ops->set_vbus(phy, on); + mutex_unlock(&phy->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_set_vbus); + int phy_reset(struct phy *phy) { int ret; diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index 78bb0d7f6b11..4d1ebde7fb14 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -36,6 +36,7 @@ enum phy_mode { * @power_on: powering on the phy * @power_off: powering off the phy * @set_mode: set the mode of the phy + * @set_vbus: enable/disable vbus in the phy (USB) * @reset: resetting the phy * @owner: the module owner containing the ops */ @@ -45,6 +46,7 @@ struct phy_ops { int (*power_on)(struct phy *phy); int (*power_off)(struct phy *phy); int (*set_mode)(struct phy *phy, enum phy_mode mode); + int (*set_vbus)(struct phy *phy, int on); int (*reset)(struct phy *phy); struct module *owner; }; @@ -138,6 +140,7 @@ int phy_exit(struct phy *phy); int phy_power_on(struct phy *phy); int phy_power_off(struct phy *phy); int phy_set_mode(struct phy *phy, enum phy_mode mode); +int phy_set_vbus(struct phy *phy, int on); int phy_reset(struct phy *phy); static inline int phy_get_bus_width(struct phy *phy) { @@ -253,6 +256,13 @@ static inline int phy_set_mode(struct phy *phy, enum phy_mode mode) return -ENOSYS; } +static inline int phy_set_vbus(struct phy *phy, int on) +{ + if (!phy) + return 0; + return -ENOSYS; +} + static inline int phy_reset(struct phy *phy) { if (!phy)
Some USB PHYs need to be told about vbus changing state explicitly. For example the qcom USB HS PHY needs to toggle a bit when vbus goes from low to high (VBUSVLDEXT) to cause the "session valid" signal to toggle. This signal will pull up D+ when the phy starts running. If the vbus signal isn't routed to the PHY this "session valid" signal won't ever toggle, so we have to toggle it explicitly. This callback is used to do that. Cc: Peter Chen <peter.chen@nxp.com> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> --- New patch drivers/phy/phy-core.c | 15 +++++++++++++++ include/linux/phy/phy.h | 10 ++++++++++ 2 files changed, 25 insertions(+) -- 2.10.0.297.gf6727b0 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html