| Message ID | 1483767488-19778-3-git-send-email-baoyou.xie@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Sat, Jan 07, 2017 at 01:38:08PM +0800, Baoyou Xie wrote: > This patch adds thermal driver for ZTE's zx2967 family. > > Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> > --- > drivers/thermal/Kconfig | 6 + > drivers/thermal/Makefile | 1 + > drivers/thermal/zx2967_thermal.c | 241 +++++++++++++++++++++++++++++++++++++++ > 3 files changed, 248 insertions(+) > create mode 100644 drivers/thermal/zx2967_thermal.c > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 18f2de6..0dd597e 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -445,3 +445,9 @@ config BCM2835_THERMAL > Support for thermal sensors on Broadcom bcm2835 SoCs. > > endif > + > +config ZX2967_THERMAL > + tristate "Thermal sensors on zx2967 SoC" > + depends on ARCH_ZX > + help > + Support for thermal sensors on ZTE zx2967 SoCs. > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile > index 677c6d9..c00c05e 100644 > --- a/drivers/thermal/Makefile > +++ b/drivers/thermal/Makefile > @@ -57,3 +57,4 @@ obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o > obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o > obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o > obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o > +obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o > diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c > new file mode 100644 > index 0000000..1aef070 > --- /dev/null > +++ b/drivers/thermal/zx2967_thermal.c > @@ -0,0 +1,241 @@ > +/* > + * ZTE's zx2967 family thermal sensor driver > + * > + * Copyright (C) 2017 ZTE Ltd. > + * > + * Author: Baoyou Xie <baoyou.xie@linaro.org> > + * > + * License terms: GNU General Public License (GPL) version 2 > + */ > + > +#include <linux/module.h> > +#include <linux/device.h> > +#include <linux/io.h> > +#include <linux/err.h> > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/platform_device.h> > +#include <linux/thermal.h> > + > +/* DCF Control Register */ > +#define ZX2967_THERMAL_DCF 0x4 > + > +/* Selection Register */ > +#define ZX2967_THERMAL_SEL 0x8 > + > +/* Control Register */ > +#define ZX2967_THERMAL_CTRL 0x10 > + > +#define ZX2967_THERMAL_ID_MASK (0x18) > + > +struct zx2967_thermal_sensor { > + struct zx2967_thermal_priv *priv; > + struct thermal_zone_device *tzd; > + int id; > +}; > + > +#define NUM_SENSORS 1 > + > +struct zx2967_thermal_priv { > + struct zx2967_thermal_sensor sensors[NUM_SENSORS]; What's the point of defining an array with only one element? > + struct mutex lock; > + struct clk *clk_gate; > + struct clk *pclk; > + void __iomem *regs; > + struct pinctrl *pinmux_dvi0_d3; > + struct pinctrl *pinmux_dvi0_d4; > + struct pinctrl *pinmux_dvi0_d5; These three pointers are not used. > +}; > + > +static int zx2967_thermal_suspend(struct device *dev) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev); > + > + if (priv && priv->pclk) > + clk_disable_unprepare(priv->pclk); > + > + if (priv && priv->clk_gate) > + clk_disable_unprepare(priv->clk_gate); > + dev_info(dev, "suspended\n"); Noisy message. > + > + return 0; > +} > + > +static int zx2967_thermal_resume(struct device *dev) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev); > + int error; > + > + error = clk_prepare_enable(priv->clk_gate); > + if (error) > + return error; > + > + error = clk_prepare_enable(priv->pclk); > + if (error) > + return error; clk_disable_unprepare() should be called for priv->clk_gate before returning here. > + > + dev_info(dev, "resumed\n"); > + > + return 0; > +} > + > +static int zx2967_thermal_get_temp(void *data, int *temp) > +{ > + void __iomem *regs; > + struct zx2967_thermal_sensor *sensor = data; > + struct zx2967_thermal_priv *priv = sensor->priv; > + unsigned long timeout = jiffies + msecs_to_jiffies(100); > + u32 val, sel_id; > + > + regs = priv->regs; > + mutex_lock(&priv->lock); > + > + writel_relaxed(0, regs); I suggest we have a macro for register at offset 0 as well to improve the readability. > + writel_relaxed(2, regs + ZX2967_THERMAL_DCF); > + > + val = readl_relaxed(regs + ZX2967_THERMAL_SEL); > + val &= ~ZX2967_THERMAL_ID_MASK; > + sel_id = sensor->id ? 8 : 0x10; > + val |= sel_id; > + writel_relaxed(val, regs + ZX2967_THERMAL_SEL); > + > + usleep_range(100, 300); > + while (!(readl_relaxed(regs + ZX2967_THERMAL_CTRL) & 0x1000)) { > + if (time_after(jiffies, timeout)) { > + pr_err("*** Thermal sensor %d data timeout\n", > + sensor->id); dev_err? And drop "*** ". > + mutex_unlock(&priv->lock); > + return -EIO; -ETIMEDOUT? > + } > + } > + > + writel_relaxed(3, regs + ZX2967_THERMAL_DCF); > + val = readl_relaxed(regs + ZX2967_THERMAL_CTRL) & 0xfff; > + writel_relaxed(1, regs); > + > + /** Calculate temperature */ > + *temp = DIV_ROUND_CLOSEST((val - 922) * 1000, 1951); > + > + mutex_unlock(&priv->lock); > + > + return 0; > +} > + > +static struct thermal_zone_of_device_ops zx2967_of_thermal_ops = { > + .get_temp = zx2967_thermal_get_temp, > +}; > + > +static int zx2967_thermal_probe(struct platform_device *pdev) > +{ > + struct zx2967_thermal_priv *priv; > + struct resource *res; > + int ret, i; > + > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + priv->regs = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(priv->regs)) > + return PTR_ERR(priv->regs); > + > + priv->clk_gate = devm_clk_get(&pdev->dev, "tempsensor_gate"); > + if (IS_ERR(priv->clk_gate)) { > + ret = PTR_ERR(priv->clk_gate); > + dev_err(&pdev->dev, "failed to get clock gate: %d\n", ret); > + return ret; > + } > + > + ret = clk_prepare_enable(priv->clk_gate); > + if (ret) { > + dev_err(&pdev->dev, "failed to enable converter clock: %d\n", > + ret); > + return ret; > + } > + > + priv->pclk = devm_clk_get(&pdev->dev, "tempsensor_pclk"); > + if (IS_ERR(priv->pclk)) { > + ret = PTR_ERR(priv->pclk); > + dev_err(&pdev->dev, "failed to get apb clock: %d\n", ret); > + return ret; > + } > + > + ret = clk_prepare_enable(priv->pclk); > + if (ret) { > + dev_err(&pdev->dev, "failed to enable converter clock: %d\n", > + ret); > + return ret; The use count of enable and prepare on priv->clk_gate will be unbalanced. > + } > + > + mutex_init(&priv->lock); > + for (i = 0; i < NUM_SENSORS; i++) { > + struct zx2967_thermal_sensor *sensor = &priv->sensors[i]; > + > + sensor->priv = priv; > + sensor->id = i; > + sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, > + i, > + sensor, > + &zx2967_of_thermal_ops); > + if (IS_ERR(sensor->tzd)) { > + ret = PTR_ERR(sensor->tzd); > + dev_err(&pdev->dev, "failed to register sensor %d: %d\n", > + i, ret); > + goto remove_ts; > + } > + } > + platform_set_drvdata(pdev, priv); > + > + return 0; > + > +remove_ts: > + for (i--; i >= 0; i--) > + thermal_zone_of_sensor_unregister(&pdev->dev, > + priv->sensors[i].tzd); > + > + return ret; Unbalanced clk_prepare_enable(priv->pclk). Shawn > +} > + > +static int zx2967_thermal_exit(struct platform_device *pdev) > +{ > + struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev); > + int i; > + > + for (i = 0; i < NUM_SENSORS; i++) { > + struct zx2967_thermal_sensor *sensor = &priv->sensors[i]; > + > + thermal_zone_of_sensor_unregister(&pdev->dev, sensor->tzd); > + } > + clk_disable_unprepare(priv->pclk); > + clk_disable_unprepare(priv->clk_gate); > + > + return 0; > +} > + > +static const struct of_device_id zx2967_thermal_id_table[] = { > + { .compatible = "zte,zx2967-thermal" }, > + { .compatible = "zte,zx296718-thermal" }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, zx2967_thermal_id_table); > + > +static SIMPLE_DEV_PM_OPS(zx2967_thermal_pm_ops, > + zx2967_thermal_suspend, zx2967_thermal_resume); > + > +static struct platform_driver zx2967_thermal_driver = { > + .probe = zx2967_thermal_probe, > + .remove = zx2967_thermal_exit, > + .driver = { > + .name = "zx2967_thermal", > + .of_match_table = zx2967_thermal_id_table, > + .pm = &zx2967_thermal_pm_ops, > + }, > +}; > +module_platform_driver(zx2967_thermal_driver); > + > +MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>"); > +MODULE_DESCRIPTION("ZTE zx2967 thermal driver"); > +MODULE_LICENSE("GPL"); > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 18f2de6..0dd597e 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -445,3 +445,9 @@ config BCM2835_THERMAL Support for thermal sensors on Broadcom bcm2835 SoCs. endif + +config ZX2967_THERMAL + tristate "Thermal sensors on zx2967 SoC" + depends on ARCH_ZX + help + Support for thermal sensors on ZTE zx2967 SoCs. diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 677c6d9..c00c05e 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -57,3 +57,4 @@ obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o +obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c new file mode 100644 index 0000000..1aef070 --- /dev/null +++ b/drivers/thermal/zx2967_thermal.c @@ -0,0 +1,241 @@ +/* + * ZTE's zx2967 family thermal sensor driver + * + * Copyright (C) 2017 ZTE Ltd. + * + * Author: Baoyou Xie <baoyou.xie@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/thermal.h> + +/* DCF Control Register */ +#define ZX2967_THERMAL_DCF 0x4 + +/* Selection Register */ +#define ZX2967_THERMAL_SEL 0x8 + +/* Control Register */ +#define ZX2967_THERMAL_CTRL 0x10 + +#define ZX2967_THERMAL_ID_MASK (0x18) + +struct zx2967_thermal_sensor { + struct zx2967_thermal_priv *priv; + struct thermal_zone_device *tzd; + int id; +}; + +#define NUM_SENSORS 1 + +struct zx2967_thermal_priv { + struct zx2967_thermal_sensor sensors[NUM_SENSORS]; + struct mutex lock; + struct clk *clk_gate; + struct clk *pclk; + void __iomem *regs; + struct pinctrl *pinmux_dvi0_d3; + struct pinctrl *pinmux_dvi0_d4; + struct pinctrl *pinmux_dvi0_d5; +}; + +static int zx2967_thermal_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev); + + if (priv && priv->pclk) + clk_disable_unprepare(priv->pclk); + + if (priv && priv->clk_gate) + clk_disable_unprepare(priv->clk_gate); + dev_info(dev, "suspended\n"); + + return 0; +} + +static int zx2967_thermal_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev); + int error; + + error = clk_prepare_enable(priv->clk_gate); + if (error) + return error; + + error = clk_prepare_enable(priv->pclk); + if (error) + return error; + + dev_info(dev, "resumed\n"); + + return 0; +} + +static int zx2967_thermal_get_temp(void *data, int *temp) +{ + void __iomem *regs; + struct zx2967_thermal_sensor *sensor = data; + struct zx2967_thermal_priv *priv = sensor->priv; + unsigned long timeout = jiffies + msecs_to_jiffies(100); + u32 val, sel_id; + + regs = priv->regs; + mutex_lock(&priv->lock); + + writel_relaxed(0, regs); + writel_relaxed(2, regs + ZX2967_THERMAL_DCF); + + val = readl_relaxed(regs + ZX2967_THERMAL_SEL); + val &= ~ZX2967_THERMAL_ID_MASK; + sel_id = sensor->id ? 8 : 0x10; + val |= sel_id; + writel_relaxed(val, regs + ZX2967_THERMAL_SEL); + + usleep_range(100, 300); + while (!(readl_relaxed(regs + ZX2967_THERMAL_CTRL) & 0x1000)) { + if (time_after(jiffies, timeout)) { + pr_err("*** Thermal sensor %d data timeout\n", + sensor->id); + mutex_unlock(&priv->lock); + return -EIO; + } + } + + writel_relaxed(3, regs + ZX2967_THERMAL_DCF); + val = readl_relaxed(regs + ZX2967_THERMAL_CTRL) & 0xfff; + writel_relaxed(1, regs); + + /** Calculate temperature */ + *temp = DIV_ROUND_CLOSEST((val - 922) * 1000, 1951); + + mutex_unlock(&priv->lock); + + return 0; +} + +static struct thermal_zone_of_device_ops zx2967_of_thermal_ops = { + .get_temp = zx2967_thermal_get_temp, +}; + +static int zx2967_thermal_probe(struct platform_device *pdev) +{ + struct zx2967_thermal_priv *priv; + struct resource *res; + int ret, i; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->regs)) + return PTR_ERR(priv->regs); + + priv->clk_gate = devm_clk_get(&pdev->dev, "tempsensor_gate"); + if (IS_ERR(priv->clk_gate)) { + ret = PTR_ERR(priv->clk_gate); + dev_err(&pdev->dev, "failed to get clock gate: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(priv->clk_gate); + if (ret) { + dev_err(&pdev->dev, "failed to enable converter clock: %d\n", + ret); + return ret; + } + + priv->pclk = devm_clk_get(&pdev->dev, "tempsensor_pclk"); + if (IS_ERR(priv->pclk)) { + ret = PTR_ERR(priv->pclk); + dev_err(&pdev->dev, "failed to get apb clock: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(priv->pclk); + if (ret) { + dev_err(&pdev->dev, "failed to enable converter clock: %d\n", + ret); + return ret; + } + + mutex_init(&priv->lock); + for (i = 0; i < NUM_SENSORS; i++) { + struct zx2967_thermal_sensor *sensor = &priv->sensors[i]; + + sensor->priv = priv; + sensor->id = i; + sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, + i, + sensor, + &zx2967_of_thermal_ops); + if (IS_ERR(sensor->tzd)) { + ret = PTR_ERR(sensor->tzd); + dev_err(&pdev->dev, "failed to register sensor %d: %d\n", + i, ret); + goto remove_ts; + } + } + platform_set_drvdata(pdev, priv); + + return 0; + +remove_ts: + for (i--; i >= 0; i--) + thermal_zone_of_sensor_unregister(&pdev->dev, + priv->sensors[i].tzd); + + return ret; +} + +static int zx2967_thermal_exit(struct platform_device *pdev) +{ + struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < NUM_SENSORS; i++) { + struct zx2967_thermal_sensor *sensor = &priv->sensors[i]; + + thermal_zone_of_sensor_unregister(&pdev->dev, sensor->tzd); + } + clk_disable_unprepare(priv->pclk); + clk_disable_unprepare(priv->clk_gate); + + return 0; +} + +static const struct of_device_id zx2967_thermal_id_table[] = { + { .compatible = "zte,zx2967-thermal" }, + { .compatible = "zte,zx296718-thermal" }, + {} +}; +MODULE_DEVICE_TABLE(of, zx2967_thermal_id_table); + +static SIMPLE_DEV_PM_OPS(zx2967_thermal_pm_ops, + zx2967_thermal_suspend, zx2967_thermal_resume); + +static struct platform_driver zx2967_thermal_driver = { + .probe = zx2967_thermal_probe, + .remove = zx2967_thermal_exit, + .driver = { + .name = "zx2967_thermal", + .of_match_table = zx2967_thermal_id_table, + .pm = &zx2967_thermal_pm_ops, + }, +}; +module_platform_driver(zx2967_thermal_driver); + +MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>"); +MODULE_DESCRIPTION("ZTE zx2967 thermal driver"); +MODULE_LICENSE("GPL");
This patch adds thermal driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> --- drivers/thermal/Kconfig | 6 + drivers/thermal/Makefile | 1 + drivers/thermal/zx2967_thermal.c | 241 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 248 insertions(+) create mode 100644 drivers/thermal/zx2967_thermal.c -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html