diff mbox

[2/5,v2] usb: dwc2: Workaround case where GOTGCTL state is wrong

Message ID 1483473157-16678-3-git-send-email-john.stultz@linaro.org
State Superseded
Headers show

Commit Message

John Stultz Jan. 3, 2017, 7:52 p.m. UTC 
When removing a USB-A to USB-otg adapter cable, we get a change
status irq, and then in dwc2_conn_id_status_change, we
erroniously see the GOTGCTL_CONID_B flag set. This causes us to
get  stuck in the "while (!dwc2_is_device_mode(hsotg))" loop,
spitting out "Waiting for Peripheral Mode, Mode=Host" warnings
until it fails out many seconds later.

This patch works around the issue by re-reading the GOTGCTL
state to check if the GOTGCTL_CONID_B is still set and if not
restarting the change status logic.

I suspect this isn't the best solution, but it seems to work
well for me.

Feedback would be greatly appreciated!

Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Vardan Mikayelyan <mvardan@synopsys.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: John Youn <johnyoun@synopsys.com>

Reviewed-by: Vardan Mikayelyan <mvardan@synopsys.com>

Signed-off-by: John Stultz <john.stultz@linaro.org>

---
v2: Rework goto logic suggested by Vardan, and add a comment

 drivers/usb/dwc2/hcd.c | 9 +++++++++
 1 file changed, 9 insertions(+)

-- 
2.7.4
diff mbox

Patch

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 911c3b3..b60307a 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3241,6 +3241,14 @@  static void dwc2_conn_id_status_change(struct work_struct *work)
 				 dwc2_is_host_mode(hsotg) ? "Host" :
 				 "Peripheral");
 			usleep_range(20000, 40000);
+			/*
+			 * Sometimes the initial GOTGCTRL read is wrong, so
+			 * check it again and jump to host mode if that was
+			 * the case.
+			 */
+			gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
+			if (!(gotgctl & GOTGCTL_CONID_B))
+				goto host;
 			if (++count > 250)
 				break;
 		}
@@ -3255,6 +3263,7 @@  static void dwc2_conn_id_status_change(struct work_struct *work)
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 		dwc2_hsotg_core_connect(hsotg);
 	} else {
+host:
 		/* A-Device connector (Host Mode) */
 		dev_dbg(hsotg->dev, "connId A\n");
 		while (!dwc2_is_host_mode(hsotg)) {