@@ -16,6 +16,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/module.h>
@@ -180,7 +181,7 @@ static int mbigen_domain_translate(struct irq_domain *d,
unsigned long *hwirq,
unsigned int *type)
{
- if (is_of_node(fwspec->fwnode)) {
+ if (is_of_node(fwspec->fwnode) || is_acpi_device_node(fwspec->fwnode)) {
if (fwspec->param_count != 2)
return -EINVAL;
@@ -271,6 +272,54 @@ static int mbigen_of_create_domain(struct platform_device *pdev,
return 0;
}
+#ifdef CONFIG_ACPI
+static acpi_status mbigen_acpi_process_resource(struct acpi_resource *ares,
+ void *context)
+{
+ struct acpi_resource_extended_irq *ext_irq;
+ u32 *num_irqs = context;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+ ext_irq = &ares->data.extended_irq;
+ *num_irqs += ext_irq->interrupt_count;
+ break;
+ default:
+ break;
+ }
+
+ return AE_OK;
+}
+
+static int mbigen_acpi_create_domain(struct platform_device *pdev,
+ struct mbigen_device *mgn_chip)
+{
+ struct irq_domain *domain;
+ u32 num_msis = 0;
+ acpi_status status;
+
+ status = acpi_walk_resources(ACPI_HANDLE(&pdev->dev), METHOD_NAME__PRS,
+ mbigen_acpi_process_resource, &num_msis);
+ if (ACPI_FAILURE(status) || num_msis == 0)
+ return -EINVAL;
+
+ domain = platform_msi_create_device_domain(&pdev->dev, num_msis,
+ mbigen_write_msg,
+ &mbigen_domain_ops,
+ mgn_chip);
+ if (!domain)
+ return -ENOMEM;
+
+ return 0;
+}
+#else
+static int mbigen_acpi_create_domain(struct platform_device *pdev,
+ struct mbigen_device *mgn_chip)
+{
+ return -ENODEV;
+}
+#endif
+
static int mbigen_device_probe(struct platform_device *pdev)
{
struct mbigen_device *mgn_chip;
@@ -288,9 +337,17 @@ static int mbigen_device_probe(struct platform_device *pdev)
if (IS_ERR(mgn_chip->base))
return PTR_ERR(mgn_chip->base);
- err = mbigen_of_create_domain(pdev, mgn_chip);
- if (err)
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
+ err = mbigen_of_create_domain(pdev, mgn_chip);
+ else if (ACPI_COMPANION(&pdev->dev))
+ err = mbigen_acpi_create_domain(pdev, mgn_chip);
+ else
+ err = -EINVAL;
+
+ if (err) {
+ dev_err(&pdev->dev, "Failed to create mbi-gen@%p irqdomain", mgn_chip->base);
return err;
+ }
platform_set_drvdata(pdev, mgn_chip);
return 0;
@@ -302,10 +359,17 @@ static int mbigen_device_probe(struct platform_device *pdev)
};
MODULE_DEVICE_TABLE(of, mbigen_of_match);
+static const struct acpi_device_id mbigen_acpi_match[] = {
+ { "HISI0152", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, mbigen_acpi_match);
+
static struct platform_driver mbigen_platform_driver = {
.driver = {
.name = "Hisilicon MBIGEN-V2",
.of_match_table = mbigen_of_match,
+ .acpi_match_table = ACPI_PTR(mbigen_acpi_match),
},
.probe = mbigen_device_probe,
};
With the preparation of platform msi support and interrupt producer in DSDT, we can add mbigen ACPI support now. We are using _PRS methd to indicate number of irq pins instead of num_pins in DT to avoid _DSD usage in this case. For mbi-gen, Device(MBI0) { Name(_HID, "HISI0152") Name(_UID, Zero) Name(_CRS, ResourceTemplate() { Memory32Fixed(ReadWrite, 0xa0080000, 0x10000) }) Name (_PRS, ResourceTemplate() { Interrupt(ResourceProducer,...) {12,14,....} }) } For devices, Device(COM0) { Name(_HID, "ACPIIDxx") Name(_UID, Zero) Name(_CRS, ResourceTemplate() { Memory32Fixed(ReadWrite, 0xb0030000, 0x10000) Interrupt(ResourceConsumer,..., "\_SB.MBI0") {12} }) } With the helpe of platform msi and interrupt producer, then devices will get the virq from mbi-gen's irqdomain. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Majun <majun258@huawei.com> Tested-by: Majun <majun258@huawei.com> Tested-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> --- drivers/irqchip/irq-mbigen.c | 70 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 67 insertions(+), 3 deletions(-) -- 1.9.1