diff mbox series

[rtw-next,v1,09/13] wifi: rtw89: Fix rtw89_mac_power_switch() for USB

Message ID 3df912fb-3a56-40d7-940f-c82a23212adc@gmail.com
State New
Headers show
Series wifi: rtw89: Add support for USB devices | expand

Commit Message

Bitterblue Smith May 4, 2025, 8:52 p.m. UTC 
Clear some bits in some registers in order to allow RTL8851BU to power
on. Also tested with RTL8832BU and RTL8832CU.

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
 drivers/net/wireless/realtek/rtw89/mac.c | 8 ++++++++
 drivers/net/wireless/realtek/rtw89/reg.h | 1 +
 2 files changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
index 99f01fff90fe..d3cf67dfabc9 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.c
+++ b/drivers/net/wireless/realtek/rtw89/mac.c
@@ -1458,6 +1458,14 @@  static int rtw89_mac_power_switch(struct rtw89_dev *rtwdev, bool on)
 	int ret;
 	u8 val;
 
+	if (rtwdev->hci.type == RTW89_HCI_TYPE_USB &&
+	    rtw89_read32_mask(rtwdev, R_AX_GPIO_MUXCFG, B_AX_BOOT_MODE)) {
+		rtw89_write32_clr(rtwdev, R_AX_SYS_PW_CTRL, B_AX_APFN_ONMAC);
+		rtw89_write32_clr(rtwdev, R_AX_SYS_STATUS1, B_AX_AUTO_WLPON);
+		rtw89_write32_clr(rtwdev, R_AX_GPIO_MUXCFG, B_AX_BOOT_MODE);
+		rtw89_write32_clr(rtwdev, R_AX_RSV_CTRL, B_AX_R_DIS_PRST);
+	}
+
 	if (on) {
 		cfg_seq = chip->pwr_on_seq;
 		cfg_func = chip->ops->pwr_on_func;
diff --git a/drivers/net/wireless/realtek/rtw89/reg.h b/drivers/net/wireless/realtek/rtw89/reg.h
index f05c81ae5869..9d9e1b02bfc7 100644
--- a/drivers/net/wireless/realtek/rtw89/reg.h
+++ b/drivers/net/wireless/realtek/rtw89/reg.h
@@ -182,6 +182,7 @@ 
 
 #define R_AX_SYS_STATUS1 0x00F4
 #define B_AX_SEL_0XC0_MASK GENMASK(17, 16)
+#define B_AX_AUTO_WLPON BIT(10)
 #define B_AX_PAD_HCI_SEL_V2_MASK GENMASK(5, 3)
 #define MAC_AX_HCI_SEL_SDIO_UART 0
 #define MAC_AX_HCI_SEL_MULTI_USB 1