diff mbox series

[v1,07/10] ARM: dts: exynos: Add rtc clock definitions for MAX77686 PMIC for Exynos5250 smdk5250

Message ID 20250425132727.5160-8-linux.amoon@gmail.com
State New
Headers show
Series Add rtc and suspend to ram for Maxim MAX77686 PMIC | expand

Commit Message

Anand Moon April 25, 2025, 1:26 p.m. UTC 
The MAX77686A includes a crystal driver with an external load capacitance.
When enabled, the crystal driver starts in low power mode. The
LowJitterMode bit controls the crystal driver, allowing it to switch
between low power mode and low jitter mode (high power mode).
Setting the LowJitterMode bit to 1 activates low jitter mode on
three channels simultaneously. These three 32khz buffer outputs
(32KHAP, 32KHCP, P32KH) are independently enabled/disabled over I2C.

The 32khz_ap output is typically routed to the AP Processor, while the
32khz_cp and 32khz_pmic outputs are intended for BT, WLAN, BB,
or peripheral chipsets.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
index bb623726ef1e..d41409019671 100644
--- a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
@@ -145,6 +145,13 @@  max77686: pmic@9 {
 		#clock-cells = <1>;
 		wakeup-source;
 
+		max77686_osc: clocks {
+			compatible = "max77686-rtc";
+			#clock-cells = <1>;
+			clock-output-names = "32khz_ap",
+				"32khz_cp", "32khz_pmic";
+		};
+
 		voltage-regulators {
 			ldo1_reg: LDO1 {
 				regulator-name = "P1.0V_LDO_OUT1";