diff mbox series

[v5,1/2] arm64: dts: qcom: qcm2290: fix (some) of QUP interconnects

Message ID 20250425-rb1-bt-v5-1-154b35435b4d@oss.qualcomm.com
State New
Headers show
Series Bluetooth: qca: add Qualcomm WCN3950 BT/WiFi chip support | expand

Commit Message

Dmitry Baryshkov April 25, 2025, 6:45 p.m. UTC 
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

While adding interconnect support for the QCM2290 platform some of them
got the c&p error, rogue MASTER_APPSS_PROC for the config_noc
interconnect. Turn that into SLAVE_QUP_0 as expected.

Fixes: 5b970ff0193d ("arm64: dts: qcom: qcm2290: Hook up interconnects")
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 6a7ce2c6b88e51e126cb5add007a0857b0606a0e..c7946731438bae2882e6710c21504915eff30dfa 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -1081,7 +1081,7 @@  spi0: spi@4a80000 {
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1100,7 +1100,7 @@  uart0: serial@4a80000 {
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				status = "disabled";
@@ -1145,7 +1145,7 @@  spi1: spi@4a84000 {
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1192,7 +1192,7 @@  spi2: spi@4a88000 {
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1239,7 +1239,7 @@  spi3: spi@4a8c000 {
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1303,7 +1303,7 @@  spi4: spi@4a90000 {
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1322,7 +1322,7 @@  uart4: serial@4a90000 {
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				status = "disabled";
@@ -1367,7 +1367,7 @@  spi5: spi@4a94000 {
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;