@@ -19132,6 +19132,12 @@ F: kernel/time/itimer.c
F: kernel/time/posix-*
F: kernel/time/namespace.c
+PORTWELL EC DRIVER
+M: Yen-Chi Huang <jesse.huang@portwell.com.tw>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: drivers/platform/x86/portwell-ec.c
+
POWER MANAGEMENT CORE
M: "Rafael J. Wysocki" <rafael@kernel.org>
L: linux-pm@vger.kernel.org
@@ -779,6 +779,21 @@ config PCENGINES_APU2
To compile this driver as a module, choose M here: the module
will be called pcengines-apuv2.
+config PORTWELL_EC
+ tristate "Portwell Embedded Controller driver"
+ depends on X86 && HAS_IOPORT && WATCHDOG && GPIOLIB
+ select WATCHDOG_CORE
+ help
+ This driver provides support for the GPIO pins and watchdog timer
+ embedded in Portwell's EC.
+
+ Theoretically, this driver should work on multiple Portwell platforms,
+ but it has only been tested on the Portwell NANO-6064 board.
+ If you encounter any issues on other boards, please report them.
+
+ To compile this driver as a module, choose M here: the module
+ will be called portwell-ec.
+
config BARCO_P50_GPIO
tristate "Barco P50 GPIO driver for identify LED/button"
depends on GPIOLIB
@@ -92,6 +92,9 @@ obj-$(CONFIG_XO1_RFKILL) += xo1-rfkill.o
# PC Engines
obj-$(CONFIG_PCENGINES_APU2) += pcengines-apuv2.o
+# Portwell
+obj-$(CONFIG_PORTWELL_EC) += portwell-ec.o
+
# Barco
obj-$(CONFIG_BARCO_P50_GPIO) += barco-p50-gpio.o
new file mode 100644
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * portwell-ec.c: Portwell embedded controller driver.
+ *
+ * Tested on:
+ * - Portwell NANO-6064
+ *
+ * This driver provides support for GPIO and Watchdog Timer
+ * functionalities of the Portwell boards with ITE embedded controller (EC).
+ * The EC is accessed through I/O ports and provides:
+ * - 8 GPIO pins for control and monitoring
+ * - Hardware watchdog with 1-15300 second timeout range
+ *
+ * It integrates with the Linux GPIO and Watchdog subsystems, allowing
+ * userspace interaction with EC GPIO pins and watchdog control,
+ * ensuring system stability and configurability.
+ *
+ * (C) Copyright 2025 Portwell, Inc.
+ * Author: Yen-Chi Huang (jesse.huang@portwell.com.tw)
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/dmi.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/string.h>
+#include <linux/watchdog.h>
+
+#define PORTWELL_EC_IOSPACE 0xe300
+#define PORTWELL_EC_IOSPACE_LEN SZ_256
+
+#define PORTWELL_GPIO_PINS 8
+#define PORTWELL_GPIO_DIR_REG 0x2b
+#define PORTWELL_GPIO_VAL_REG 0x2c
+
+#define PORTWELL_WDT_EC_CONFIG_ADDR 0x06
+#define PORTWELL_WDT_CONFIG_ENABLE 0x1
+#define PORTWELL_WDT_CONFIG_DISABLE 0x0
+#define PORTWELL_WDT_EC_COUNT_MIN_ADDR 0x07
+#define PORTWELL_WDT_EC_COUNT_SEC_ADDR 0x08
+#define PORTWELL_WDT_EC_MAX_COUNT_SECOND (255 * 60)
+
+#define PORTWELL_EC_FW_VENDOR_ADDRESS 0x4d
+#define PORTWELL_EC_FW_VENDOR_LENGTH 3
+#define PORTWELL_EC_FW_VENDOR_NAME "PWG"
+
+static bool force;
+module_param(force, bool, 0444);
+MODULE_PARM_DESC(force, "Force loading EC driver without checking DMI boardname");
+
+static const struct dmi_system_id pwec_dmi_table[] = {
+ {
+ .ident = "NANO-6064 series",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "NANO-6064"),
+ },
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(dmi, pwec_dmi_table);
+
+/* Functions for access EC via IOSPACE */
+
+static void pwec_write(u8 index, u8 data)
+{
+ outb(data, PORTWELL_EC_IOSPACE + index);
+}
+
+static u8 pwec_read(u8 address)
+{
+ return inb(PORTWELL_EC_IOSPACE + address);
+}
+
+/* GPIO functions */
+
+static int pwec_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ return (pwec_read(PORTWELL_GPIO_VAL_REG) & (1 << offset)) ? 1 : 0;
+}
+
+static int pwec_gpio_set_rv(struct gpio_chip *chip, unsigned int offset, int val)
+{
+ u8 tmp = pwec_read(PORTWELL_GPIO_VAL_REG);
+
+ if (val)
+ tmp |= (1 << offset);
+ else
+ tmp &= ~(1 << offset);
+ pwec_write(PORTWELL_GPIO_VAL_REG, tmp);
+
+ return 0;
+}
+
+static int pwec_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+ u8 direction = pwec_read(PORTWELL_GPIO_DIR_REG) & (1 << offset);
+
+ if (direction)
+ return GPIO_LINE_DIRECTION_IN;
+ else
+ return GPIO_LINE_DIRECTION_OUT;
+}
+
+/*
+ * Changing direction causes issues on some boards,
+ * so direction_input and direction_output are disabled for now.
+ */
+
+static int pwec_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
+{
+ return -EOPNOTSUPP;
+}
+
+static int pwec_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
+{
+ return -EOPNOTSUPP;
+}
+
+static struct gpio_chip pwec_gpio_chip = {
+ .label = "portwell-ec-gpio",
+ .get_direction = pwec_gpio_get_direction,
+ .direction_input = pwec_gpio_direction_input,
+ .direction_output = pwec_gpio_direction_output,
+ .get = pwec_gpio_get,
+ .set_rv = pwec_gpio_set_rv,
+ .base = -1,
+ .ngpio = PORTWELL_GPIO_PINS,
+};
+
+/* Watchdog functions */
+
+static void pwec_wdt_write_timeout(unsigned int timeout)
+{
+ pwec_write(PORTWELL_WDT_EC_COUNT_MIN_ADDR, timeout / 60);
+ pwec_write(PORTWELL_WDT_EC_COUNT_SEC_ADDR, timeout % 60);
+}
+
+static int pwec_wdt_trigger(struct watchdog_device *wdd)
+{
+ pwec_wdt_write_timeout(wdd->timeout);
+ pwec_write(PORTWELL_WDT_EC_CONFIG_ADDR, PORTWELL_WDT_CONFIG_ENABLE);
+
+ return 0;
+}
+
+static int pwec_wdt_start(struct watchdog_device *wdd)
+{
+ return pwec_wdt_trigger(wdd);
+}
+
+static int pwec_wdt_stop(struct watchdog_device *wdd)
+{
+ pwec_write(PORTWELL_WDT_EC_CONFIG_ADDR, PORTWELL_WDT_CONFIG_DISABLE);
+ return 0;
+}
+
+static int pwec_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout)
+{
+ if (timeout == 0 || timeout > PORTWELL_WDT_EC_MAX_COUNT_SECOND)
+ return -EINVAL;
+
+ wdd->timeout = timeout;
+ pwec_wdt_write_timeout(wdd->timeout);
+
+ return 0;
+}
+
+/* Ensure consistent min/sec read in case of second rollover. */
+static unsigned int pwec_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+ u8 min, sec1, sec2;
+
+ sec1 = pwec_read(PORTWELL_WDT_EC_COUNT_SEC_ADDR);
+ min = pwec_read(PORTWELL_WDT_EC_COUNT_MIN_ADDR);
+ sec2 = pwec_read(PORTWELL_WDT_EC_COUNT_SEC_ADDR);
+
+ if (sec2 > sec1) {
+ min--;
+ sec1 = sec2;
+ }
+
+ return min * 60 + sec1;
+}
+
+static const struct watchdog_ops pwec_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = pwec_wdt_start,
+ .stop = pwec_wdt_stop,
+ .ping = pwec_wdt_trigger,
+ .set_timeout = pwec_wdt_set_timeout,
+ .get_timeleft = pwec_wdt_get_timeleft,
+};
+
+static struct watchdog_device ec_wdt_dev = {
+ .info = &(struct watchdog_info){
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "Portwell EC watchdog",
+ },
+ .ops = &pwec_wdt_ops,
+ .timeout = 60,
+ .min_timeout = 1,
+ .max_timeout = PORTWELL_WDT_EC_MAX_COUNT_SECOND,
+};
+
+static int pwec_firmware_vendor_check(void)
+{
+ u8 buf[PORTWELL_EC_FW_VENDOR_LENGTH + 1];
+ u8 i;
+
+ for (i = 0; i < PORTWELL_EC_FW_VENDOR_LENGTH; i++)
+ buf[i] = pwec_read(PORTWELL_EC_FW_VENDOR_ADDRESS + i);
+ buf[PORTWELL_EC_FW_VENDOR_LENGTH] = '\0';
+
+ return (!strcmp(PORTWELL_EC_FW_VENDOR_NAME, buf)) ? 0 : -ENODEV;
+}
+
+static int pwec_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ if (!devm_request_region(&pdev->dev, PORTWELL_EC_IOSPACE,
+ PORTWELL_EC_IOSPACE_LEN, dev_name(&pdev->dev))) {
+ dev_err(&pdev->dev, "I/O region 0xE300-0xE3FF busy\n");
+ return -EBUSY;
+ }
+
+ ret = pwec_firmware_vendor_check();
+ if (ret < 0)
+ return ret;
+
+ ret = devm_gpiochip_add_data(&pdev->dev, &pwec_gpio_chip, NULL);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to register Portwell EC GPIO\n");
+ return ret;
+ }
+
+ ret = devm_watchdog_register_device(&pdev->dev, &ec_wdt_dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to register Portwell EC Watchdog\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver pwec_driver = {
+ .driver = {
+ .name = "portwell-ec",
+ },
+ .probe = pwec_probe
+};
+
+static struct platform_device *pwec_dev;
+
+static int __init pwec_init(void)
+{
+ int ret;
+
+ if (!dmi_check_system(pwec_dmi_table)) {
+ if (!force)
+ return -ENODEV;
+ pr_warn("force load portwell-ec without DMI check\n");
+ }
+
+ ret = platform_driver_register(&pwec_driver);
+ if (ret)
+ return ret;
+
+ pwec_dev = platform_device_register_simple("portwell-ec", -1, NULL, 0);
+ if (IS_ERR(pwec_dev)) {
+ platform_driver_unregister(&pwec_driver);
+ return PTR_ERR(pwec_dev);
+ }
+
+ return 0;
+}
+
+static void __exit pwec_exit(void)
+{
+ if (pwec_dev)
+ platform_device_unregister(pwec_dev);
+ platform_driver_unregister(&pwec_driver);
+}
+
+module_init(pwec_init);
+module_exit(pwec_exit);
+
+MODULE_AUTHOR("Yen-Chi Huang <jesse.huang@portwell.com.tw>");
+MODULE_DESCRIPTION("Portwell EC Driver");
+MODULE_LICENSE("GPL");
Adds a driver for the ITE Embedded Controller (EC) on Portwell boards. It integrates with the Linux GPIO and watchdog subsystems to provide: - Control/monitoring of up to 8 EC GPIO pins. - Hardware watchdog timer with 1-255 second timeouts. The driver communicates with the EC via I/O port 0xe300 and identifies the hardware by the "PWG" firmware signature. This enables enhanced system management for Portwell embedded/industrial platforms. Signed-off-by: Yen-Chi Huang <jesse.huang@portwell.com.tw> --- V3->V4: - Added select WATCHDOG_CORE in Kconfig - Removed redundant retry logic from pwec_wdt_trigger() - Added pwec_wdt_write_timeout() helper - Handled second wraparound when reading min/sec in get_timeleft() - Reworked DMI check and force parameter logic - Fixed error handling for GPIO and platform device registration - Fixed typos, log messages, and formatting issues V2->V3: - Reworked based on review from Bartosz Golaszewski - Changed to use platform_driver and platform_device - Updated GPIO to use .set_rv() instead of .set() - Used devm_ helpers for request_region, GPIO and watchdog registration V1->V2: - Addressed review comments from Ilpo Jarvinen - Add DMI system check to avoid running on unsupported platforms - Add 'force' module parameter to override DMI matching - Use request_region() to claim I/O port access - Extend WDT timeout handling to use both minute and second registers - Increase WDT max timeout from 255s to 15300s - Use named defines for WDT enable/disable - Remove dummy pr_info() messages - Fix several coding style issues (comments, alignment, spacing) --- MAINTAINERS | 6 + drivers/platform/x86/Kconfig | 15 ++ drivers/platform/x86/Makefile | 3 + drivers/platform/x86/portwell-ec.c | 298 +++++++++++++++++++++++++++++ 4 files changed, 322 insertions(+) create mode 100644 drivers/platform/x86/portwell-ec.c