diff mbox series

[2/6] mmc: sdhci-esdhc-imx: reset async FIFO before sending manual tuning command

Message ID 20250409075550.3413032-3-ziniu.wang_1@nxp.com
State New
Headers show
Series enhance the tuning process reliability for i.MX uSDHC controller | expand

Commit Message

Luke Wang April 9, 2025, 7:55 a.m. UTC 
From: Haibo Chen <haibo.chen@nxp.com>

During manual tuning, residual data in the async FIFO from previous
commands may impact with the tuning process. To ensure a clean state:

1. Set the RST_FIFO bit (SYS_CTRL[22]) to reset the async FIFO.
2. Poll the bit until self-cleared, confirming reset completion.

This hardening ensures the tuning command starts with a clean FIFO state,
improving the reliability of the manual tuning procedure.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 8c2f5ae949ae..8528aa6adf02 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -31,6 +31,7 @@ 
 #include "cqhci.h"
 
 #define ESDHC_SYS_CTRL_DTOCV_MASK	GENMASK(19, 16)
+#define ESDHC_SYS_CTRL_RST_FIFO		BIT(22)
 #define ESDHC_SYS_CTRL_IPP_RST_N	BIT(23)
 #define ESDHC_SYS_CTRL_RESET_TUNING	BIT(28)
 #define	ESDHC_CTRL_D3CD			0x08
@@ -1149,7 +1150,7 @@  static int usdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
 {
-	u32 reg;
+	u32 reg, sys_ctrl;
 	u8 sw_rst;
 	int ret;
 
@@ -1173,6 +1174,16 @@  static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
 	dev_dbg(mmc_dev(host->mmc),
 		"tuning with delay 0x%x ESDHC_TUNE_CTRL_STATUS 0x%x\n",
 			val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS));
+
+	/* set RST_FIFO to reset the async FIFO, and wat it to self-clear */
+	sys_ctrl = readl(host->ioaddr + ESDHC_SYSTEM_CONTROL);
+	sys_ctrl |= ESDHC_SYS_CTRL_RST_FIFO;
+	writel(sys_ctrl, host->ioaddr + ESDHC_SYSTEM_CONTROL);
+	ret = readl_poll_timeout(host->ioaddr + ESDHC_SYSTEM_CONTROL, sys_ctrl,
+				 !(sys_ctrl & ESDHC_SYS_CTRL_RST_FIFO), 10, 100);
+	if (ret == -ETIMEDOUT)
+		dev_warn(mmc_dev(host->mmc),
+			 "warning! RST_FIFO not clear in 100us\n");
 }
 
 static void esdhc_post_tuning(struct sdhci_host *host)