diff mbox series

[4/6] leds: lp8860: Enable regulator using enable_optional helper

Message ID 20250407183555.409687-4-afd@ti.com
State New
Headers show
Series [1/6] leds: lp8860: Use regmap_multi_reg_write for EEPROM writes | expand

Commit Message

Andrew Davis April 7, 2025, 6:35 p.m. UTC 
This allows the regulator to be optional which is the same as
done here with all the checks for NULL. This also disables
on remove for us, so remove the manual disabling.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 drivers/leds/leds-lp8860.c | 31 ++++---------------------------
 1 file changed, 4 insertions(+), 27 deletions(-)
diff mbox series

Patch

diff --git a/drivers/leds/leds-lp8860.c b/drivers/leds/leds-lp8860.c
index 4cd1b960d504f..f913a895d8a97 100644
--- a/drivers/leds/leds-lp8860.c
+++ b/drivers/leds/leds-lp8860.c
@@ -100,7 +100,6 @@  struct lp8860_led {
 	struct regmap *regmap;
 	struct regmap *eeprom_regmap;
 	struct gpio_desc *enable_gpio;
-	struct regulator *regulator;
 };
 
 static const struct reg_sequence lp8860_eeprom_disp_regs[] = {
@@ -232,15 +231,6 @@  static int lp8860_init(struct lp8860_led *led)
 	unsigned int read_buf;
 	int ret, reg_count;
 
-	if (led->regulator) {
-		ret = regulator_enable(led->regulator);
-		if (ret) {
-			dev_err(&led->client->dev,
-				"Failed to enable regulator\n");
-			return ret;
-		}
-	}
-
 	gpiod_direction_output(led->enable_gpio, 1);
 
 	ret = lp8860_fault_check(led);
@@ -282,13 +272,6 @@  static int lp8860_init(struct lp8860_led *led)
 	if (ret)
 		gpiod_direction_output(led->enable_gpio, 0);
 
-	if (led->regulator) {
-		ret = regulator_disable(led->regulator);
-		if (ret)
-			dev_err(&led->client->dev,
-				"Failed to disable regulator\n");
-	}
-
 	return ret;
 }
 
@@ -330,9 +313,10 @@  static int lp8860_probe(struct i2c_client *client)
 		return ret;
 	}
 
-	led->regulator = devm_regulator_get(&client->dev, "vled");
-	if (IS_ERR(led->regulator))
-		led->regulator = NULL;
+	ret = devm_regulator_get_enable_optional(&client->dev, "vled");
+	if (ret && ret != -ENODEV)
+		return dev_err_probe(&client->dev, ret,
+				     "Failed to enable vled regulator\n");
 
 	led->client = client;
 	led->led_dev.brightness_set_blocking = lp8860_brightness_set;
@@ -381,13 +365,6 @@  static void lp8860_remove(struct i2c_client *client)
 	int ret;
 
 	gpiod_direction_output(led->enable_gpio, 0);
-
-	if (led->regulator) {
-		ret = regulator_disable(led->regulator);
-		if (ret)
-			dev_err(&led->client->dev,
-				"Failed to disable regulator\n");
-	}
 }
 
 static const struct i2c_device_id lp8860_id[] = {