diff mbox series

[v6,4/6] PCI: qcom: Add support for IPQ5018

Message ID 20250321-ipq5018-pcie-v6-4-b7d659a76205@outlook.com
State Superseded
Headers show
Series Enable IPQ5018 PCI support | expand

Commit Message

George Moussalem via B4 Relay March 21, 2025, 12:14 p.m. UTC 
From: Nitheesh Sekar <quic_nsekar@quicinc.com>

Add IPQ5018 platform with is based on Qcom IP rev. 2.9.0
and Synopsys IP rev. 5.00a.

The platform itself has two PCIe Gen2 controllers: one single-lane and
one dual-lane. So let's add the IPQ5018 compatible and re-use 2_9_0 ops.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index dc98ae63362d..e91bbe218569 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1840,6 +1840,7 @@  static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-apq8064", .data = &cfg_2_1_0 },
 	{ .compatible = "qcom,pcie-apq8084", .data = &cfg_1_0_0 },
 	{ .compatible = "qcom,pcie-ipq4019", .data = &cfg_2_4_0 },
+	{ .compatible = "qcom,pcie-ipq5018", .data = &cfg_2_9_0 },
 	{ .compatible = "qcom,pcie-ipq6018", .data = &cfg_2_9_0 },
 	{ .compatible = "qcom,pcie-ipq8064", .data = &cfg_2_1_0 },
 	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },