@@ -38,6 +38,20 @@
# define TARGET_PAGE_BITS_MIN 10
#endif /* !CONFIG_USER_ONLY */
+/* ARM-specific extra insn start words:
+ * 1: Conditional execution bits
+ * 2: Partial exception syndrome for data aborts
+ */
+#define TARGET_INSN_START_EXTRA_WORDS 2
+
+/* The 2nd extra word holding syndrome info for data aborts does not use
+ * the upper 6 bits nor the lower 13 bits. We mask and shift it down to
+ * help the sleb128 encoder do a better job.
+ * When restoring the CPU state, we shift it back up.
+ */
+#define ARM_INSN_START_WORD2_MASK ((1 << 26) - 1)
+#define ARM_INSN_START_WORD2_SHIFT 13
+
/* ARM processors have a weak memory model */
#define TCG_GUEST_DEFAULT_MO (0)
@@ -100,20 +100,6 @@
#define offsetofhigh32(S, M) (offsetof(S, M) + sizeof(uint32_t))
#endif
-/* ARM-specific extra insn start words:
- * 1: Conditional execution bits
- * 2: Partial exception syndrome for data aborts
- */
-#define TARGET_INSN_START_EXTRA_WORDS 2
-
-/* The 2nd extra word holding syndrome info for data aborts does not use
- * the upper 6 bits nor the lower 13 bits. We mask and shift it down to
- * help the sleb128 encoder do a better job.
- * When restoring the CPU state, we shift it back up.
- */
-#define ARM_INSN_START_WORD2_MASK ((1 << 26) - 1)
-#define ARM_INSN_START_WORD2_SHIFT 13
-
/* We currently assume float and double are IEEE single and double
precision respectively.
Doing runtime conversions is tricky because VFP registers may contain
@@ -19,6 +19,8 @@
#define TARGET_PAGE_BITS 12
+#define TARGET_INSN_START_EXTRA_WORDS 2
+
/* PA-RISC 1.x processors have a strong memory model. */
/*
* ??? While we do not yet implement PA-RISC 2.0, those processors have
@@ -45,8 +45,6 @@
#define PRIV_KERNEL 0
#define PRIV_USER 3
-#define TARGET_INSN_START_EXTRA_WORDS 2
-
/* No need to flush MMU_ABS*_IDX */
#define HPPA_MMU_FLUSH_MASK \
(1 << MMU_KERNEL_IDX | 1 << MMU_KERNEL_P_IDX | \
@@ -22,6 +22,8 @@
#endif
#define TARGET_PAGE_BITS 12
+#define TARGET_INSN_START_EXTRA_WORDS 1
+
/* The x86 has a strong memory model with some store-after-load re-ordering */
#define TCG_GUEST_DEFAULT_MO (TCG_MO_ALL & ~TCG_MO_ST_LD)
@@ -1610,8 +1610,6 @@ typedef struct {
#define MAX_FIXED_COUNTERS 3
#define MAX_GP_COUNTERS (MSR_IA32_PERF_STATUS - MSR_P6_EVNTSEL0)
-#define TARGET_INSN_START_EXTRA_WORDS 1
-
#define NB_OPMASK_REGS 8
/* CPU can't have 0xFFFFFFFF APIC ID, use that value to distinguish
@@ -17,4 +17,6 @@
#define TARGET_PHYS_ADDR_SPACE_BITS 32
#define TARGET_VIRT_ADDR_SPACE_BITS 32
+#define TARGET_INSN_START_EXTRA_WORDS 1
+
#endif
@@ -76,8 +76,6 @@
#define M68K_MAX_TTR 2
#define TTR(type, index) ttr[((type & ACCESS_CODE) == ACCESS_CODE) * 2 + index]
-#define TARGET_INSN_START_EXTRA_WORDS 1
-
typedef CPU_LDoubleU FPReg;
typedef struct CPUArchState {
@@ -27,6 +27,8 @@
/* FIXME: MB uses variable pages down to 1K but linux only uses 4k. */
#define TARGET_PAGE_BITS 12
+#define TARGET_INSN_START_EXTRA_WORDS 1
+
/* MicroBlaze is always in-order. */
#define TCG_GUEST_DEFAULT_MO TCG_MO_ALL
@@ -231,8 +231,6 @@ typedef struct CPUArchState CPUMBState;
#define STREAM_CONTROL (1 << 3)
#define STREAM_NONBLOCK (1 << 4)
-#define TARGET_INSN_START_EXTRA_WORDS 1
-
/* use-non-secure property masks */
#define USE_NON_SECURE_M_AXI_DP_MASK 0x1
#define USE_NON_SECURE_M_AXI_IP_MASK 0x2
@@ -25,6 +25,8 @@
#define TARGET_PAGE_BITS_MIN 12
#endif
+#define TARGET_INSN_START_EXTRA_WORDS 2
+
#define TCG_GUEST_DEFAULT_MO (0)
#endif
@@ -98,8 +98,6 @@ struct CPUMIPSFPUContext {
#define FP_UNIMPLEMENTED 32
};
-#define TARGET_INSN_START_EXTRA_WORDS 2
-
typedef struct CPUMIPSMVPContext CPUMIPSMVPContext;
struct CPUMIPSMVPContext {
int32_t CP0_MVPControl;
@@ -12,6 +12,8 @@
#define TARGET_PHYS_ADDR_SPACE_BITS 32
#define TARGET_VIRT_ADDR_SPACE_BITS 32
+#define TARGET_INSN_START_EXTRA_WORDS 1
+
#define TCG_GUEST_DEFAULT_MO (0)
#endif
@@ -38,8 +38,6 @@ struct OpenRISCCPUClass {
ResettablePhases parent_phases;
};
-#define TARGET_INSN_START_EXTRA_WORDS 1
-
enum {
MMU_NOMMU_IDX = 0,
MMU_SUPERVISOR_IDX = 1,
@@ -16,6 +16,14 @@
# define TARGET_VIRT_ADDR_SPACE_BITS 32 /* sv32 */
#endif
#define TARGET_PAGE_BITS 12 /* 4 KiB Pages */
+
+/*
+ * RISC-V-specific extra insn start words:
+ * 1: Original instruction opcode
+ * 2: more information about instruction
+ */
+#define TARGET_INSN_START_EXTRA_WORDS 2
+
/*
* The current MMU Modes are:
* - U mode 0b000
@@ -43,12 +43,6 @@ typedef struct CPUArchState CPURISCVState;
# define TYPE_RISCV_CPU_BASE TYPE_RISCV_CPU_BASE64
#endif
-/*
- * RISC-V-specific extra insn start words:
- * 1: Original instruction opcode
- * 2: more information about instruction
- */
-#define TARGET_INSN_START_EXTRA_WORDS 2
/*
* b0: Whether a instruction always raise a store AMO or not.
*/
@@ -12,6 +12,8 @@
#define TARGET_PHYS_ADDR_SPACE_BITS 64
#define TARGET_VIRT_ADDR_SPACE_BITS 64
+#define TARGET_INSN_START_EXTRA_WORDS 2
+
/*
* The z/Architecture has a strong memory model with some
* store-after-load re-ordering.
@@ -35,8 +35,6 @@
#define TARGET_HAS_PRECISE_SMC
-#define TARGET_INSN_START_EXTRA_WORDS 2
-
#define MMU_USER_IDX 0
#define S390_MAX_CPUS 248
@@ -16,4 +16,6 @@
# define TARGET_VIRT_ADDR_SPACE_BITS 32
#endif
+#define TARGET_INSN_START_EXTRA_WORDS 1
+
#endif
@@ -125,8 +125,6 @@ typedef struct tlb_t {
#define UTLB_SIZE 64
#define ITLB_SIZE 4
-#define TARGET_INSN_START_EXTRA_WORDS 1
-
enum sh_features {
SH_FEATURE_SH4A = 1,
SH_FEATURE_BCR3_AND_BCR4 = 2,
@@ -21,6 +21,8 @@
# define TARGET_VIRT_ADDR_SPACE_BITS 32
#endif
+#define TARGET_INSN_START_EXTRA_WORDS 1
+
/*
* From Oracle SPARC Architecture 2015:
*
@@ -221,7 +221,6 @@ typedef struct trap_state {
uint32_t tt;
} trap_state;
#endif
-#define TARGET_INSN_START_EXTRA_WORDS 1
typedef struct sparc_def_t {
const char *name;
To avoid including the huge "cpu.h" for a simple definition, move TARGET_INSN_START_EXTRA_WORDS to "cpu-param.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- target/arm/cpu-param.h | 14 ++++++++++++++ target/arm/cpu.h | 14 -------------- target/hppa/cpu-param.h | 2 ++ target/hppa/cpu.h | 2 -- target/i386/cpu-param.h | 2 ++ target/i386/cpu.h | 2 -- target/m68k/cpu-param.h | 2 ++ target/m68k/cpu.h | 2 -- target/microblaze/cpu-param.h | 2 ++ target/microblaze/cpu.h | 2 -- target/mips/cpu-param.h | 2 ++ target/mips/cpu.h | 2 -- target/openrisc/cpu-param.h | 2 ++ target/openrisc/cpu.h | 2 -- target/riscv/cpu-param.h | 8 ++++++++ target/riscv/cpu.h | 6 ------ target/s390x/cpu-param.h | 2 ++ target/s390x/cpu.h | 2 -- target/sh4/cpu-param.h | 2 ++ target/sh4/cpu.h | 2 -- target/sparc/cpu-param.h | 2 ++ target/sparc/cpu.h | 1 - 22 files changed, 40 insertions(+), 37 deletions(-)